ALT Linux kernel packages development
 help / color / mirror / Atom feed
* [d-kernel] [PATCH 01/32] clk: added Baikal-M clock management unit driver
@ 2022-12-14 13:18 Alexey Sheplyakov
  2022-12-14 13:18 ` [d-kernel] [PATCH 02/32] cpufreq-dt: don't load on Baikal-M SoC Alexey Sheplyakov
                   ` (30 more replies)
  0 siblings, 31 replies; 35+ messages in thread
From: Alexey Sheplyakov @ 2022-12-14 13:18 UTC (permalink / raw)
  To: devel-kernel
  Cc: Роман
	Ставцев,
	Игорь
	Чудов,
	Евгений
	Синельников,
	Дмитрий
	Терёхин

On Baikal-M SoC clock management unit (CMU) is controled by
the firmware (ARM-TF), since the registers of CMU are accessible
only to the secure world. This drivers is a shim which calls into
the firmware.

Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Co-developed-by: Ekaterina Skachko <ekaterina.skachko@baikalelectronics.ru>
X-feature-Baikal-M
---
 drivers/clk/Makefile              |   1 +
 drivers/clk/baikal-m/Makefile     |   1 +
 drivers/clk/baikal-m/clk-baikal.c | 356 ++++++++++++++++++++++++++++++
 3 files changed, 358 insertions(+)
 create mode 100644 drivers/clk/baikal-m/Makefile
 create mode 100644 drivers/clk/baikal-m/clk-baikal.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..37615a5ff451 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -83,6 +83,7 @@ obj-y					+= analogbits/
 obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
 obj-$(CONFIG_ARCH_ARTPEC)		+= axis/
 obj-$(CONFIG_ARC_PLAT_AXS10X)		+= axs10x/
+obj-$(CONFIG_ARCH_BAIKAL)		+= baikal-m/
 obj-$(CONFIG_CLK_BAIKAL_T1)		+= baikal-t1/
 obj-y					+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
diff --git a/drivers/clk/baikal-m/Makefile b/drivers/clk/baikal-m/Makefile
new file mode 100644
index 000000000000..56aa4de4081c
--- /dev/null
+++ b/drivers/clk/baikal-m/Makefile
@@ -0,0 +1 @@
+obj-y += clk-baikal.o
\ No newline at end of file
diff --git a/drivers/clk/baikal-m/clk-baikal.c b/drivers/clk/baikal-m/clk-baikal.c
new file mode 100644
index 000000000000..b3adcb727458
--- /dev/null
+++ b/drivers/clk/baikal-m/clk-baikal.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * clk-baikal.c - Baikal-M clock driver.
+ *
+ * Copyright (C) 2015,2016,2020,2021 Baikal Electronics JSC
+ * Authors:
+ *   Ekaterina Skachko <ekaterina.skachko@baikalelectronics.ru>
+ *   Alexey Sheplyakov <asheplyakov@basealt.ru>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#define CMU_PLL_SET_RATE		0
+#define CMU_PLL_GET_RATE		1
+#define CMU_PLL_ENABLE			2
+#define CMU_PLL_DISABLE			3
+#define CMU_PLL_ROUND_RATE		4
+#define CMU_PLL_IS_ENABLED		5
+#define CMU_CLK_CH_SET_RATE		6
+#define CMU_CLK_CH_GET_RATE		7
+#define CMU_CLK_CH_ENABLE		8
+#define CMU_CLK_CH_DISABLE		9
+#define CMU_CLK_CH_ROUND_RATE		10
+#define CMU_CLK_CH_IS_ENABLED		11
+
+struct baikal_clk_cmu {
+	struct clk_hw	hw;
+	uint32_t	cmu_id;
+	unsigned int	parent;
+	const char	*name;
+	uint32_t	is_clk_ch;
+};
+
+#define to_baikal_cmu(_hw) container_of(_hw, struct baikal_clk_cmu, hw)
+
+/* Pointer to the place on handling SMC CMU calls in monitor */
+#define BAIKAL_SMC_LCRU_ID	0x82000000
+
+static int baikal_clk_enable(struct clk_hw *hw)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	uint32_t cmd;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_ENABLE;
+	} else {
+		cmd = CMU_PLL_ENABLE;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0,
+			pclk->parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x): %s\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			res.a0 ? "error" : "ok");
+
+	return res.a0;
+}
+
+static void baikal_clk_disable(struct clk_hw *hw)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	uint32_t cmd;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_DISABLE;
+	} else {
+		cmd = CMU_PLL_DISABLE;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0,
+			pclk->parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x): %s\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			res.a0 ? "error" : "ok");
+}
+
+static int baikal_clk_is_enabled(struct clk_hw *hw)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	uint32_t cmd;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_IS_ENABLED;
+	} else {
+		cmd = CMU_PLL_IS_ENABLED;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0,
+			pclk->parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x): %s\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			res.a0 ? "true" : "false");
+
+	return res.a0;
+}
+
+static unsigned long baikal_clk_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	uint32_t cmd;
+	unsigned long parent;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_GET_RATE;
+		parent = pclk->parent;
+	} else {
+		cmd = CMU_PLL_GET_RATE;
+		parent= parent_rate;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0,
+			parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x): %ld Hz\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			res.a0);
+
+	return res.a0;
+}
+
+static int baikal_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	uint32_t cmd;
+	unsigned long parent;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_SET_RATE;
+		parent = pclk->parent;
+	} else {
+		cmd = CMU_PLL_SET_RATE;
+		parent = parent_rate;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, rate,
+			parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x, %ld Hz): %s\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			rate,
+			res.a0 ? "error" : "ok");
+
+	return res.a0;
+}
+
+static long baikal_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct arm_smccc_res res;
+	struct baikal_clk_cmu *pclk = to_baikal_cmu(hw);
+	unsigned long parent;
+	uint32_t cmd;
+
+	if (pclk->is_clk_ch) {
+		cmd = CMU_CLK_CH_ROUND_RATE;
+		parent = pclk->parent;
+	} else {
+		cmd = CMU_PLL_ROUND_RATE;
+		parent = *prate;
+	}
+
+	arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, rate,
+			parent, 0, 0, 0, &res);
+
+	pr_debug("%s(%s, %s@0x%x): %ld Hz\n",
+			__func__,
+			pclk->name,
+			pclk->is_clk_ch ? "clkch" : "pll",
+			pclk->cmu_id,
+			res.a0);
+
+	return res.a0;
+}
+
+static const struct clk_ops be_clk_pll_ops = {
+	.enable = baikal_clk_enable,
+	.disable = baikal_clk_disable,
+	.is_enabled = baikal_clk_is_enabled,
+	.recalc_rate = baikal_clk_recalc_rate,
+	.set_rate = baikal_clk_set_rate,
+	.round_rate = baikal_clk_round_rate
+};
+
+static int __init baikal_clk_probe(struct device_node *node)
+{
+	struct clk_init_data init;
+	struct clk_init_data *init_ch;
+	struct baikal_clk_cmu *cmu;
+	struct baikal_clk_cmu **cmu_ch;
+
+	struct clk *clk;
+	struct clk_onecell_data *clk_ch;
+
+	int number, i = 0;
+	u32 rc, index;
+	struct property *prop;
+	const __be32 *p;
+	const char *clk_ch_name;
+	const char *parent_name;
+
+	cmu = kzalloc(sizeof(struct baikal_clk_cmu), GFP_KERNEL);
+	if (!cmu) {
+		pr_err("%s: could not allocate CMU clk\n", __func__);
+		return -ENOMEM;
+	}
+
+	of_property_read_string(node, "clock-output-names", &cmu->name);
+	of_property_read_u32(node, "clock-frequency", &cmu->parent);
+	of_property_read_u32(node, "cmu-id", &cmu->cmu_id);
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	/* Setup clock init structure */
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.name = cmu->name;
+	init.ops = &be_clk_pll_ops;
+	init.flags = CLK_IGNORE_UNUSED;
+
+	cmu->hw.init = &init;
+	cmu->is_clk_ch = 0;
+
+	/* Register the clock */
+	pr_debug("%s: add %s, parent %s\n", __func__, cmu->name, parent_name ? parent_name : "null");
+	clk = clk_register(NULL, &cmu->hw);
+
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register clk %s\n", __func__, cmu->name);
+		return -ENOMEM;
+	}
+
+	/* Register the clock for lookup */
+	rc = clk_register_clkdev(clk, cmu->name, NULL);
+	if (rc != 0) {
+		pr_err("%s: could not register lookup clk %s\n",
+			__func__, cmu->name);
+	}
+
+	clk_prepare_enable(clk);
+
+	number = of_property_count_u32_elems(node, "clock-indices");
+
+	if (number > 0) {
+		clk_ch = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+ 		if (!clk_ch) {
+			pr_err("%s: could not allocate CMU clk channel\n", __func__);
+			return -ENOMEM;
+ 		}
+
+		/* Get the last index to find out max number of children*/
+		of_property_for_each_u32(node, "clock-indices", prop, p, index) {
+			;
+		}
+
+		clk_ch->clks = kcalloc(index + 1, sizeof(struct clk *), GFP_KERNEL);
+		clk_ch->clk_num = index + 1;
+		cmu_ch = kcalloc((index + 1), sizeof(struct baikal_clk_cmu *), GFP_KERNEL);
+		if (!cmu_ch) {
+			kfree(clk_ch);
+			return -ENOMEM;
+		}
+		init_ch = kcalloc((number + 1), sizeof(struct clk_init_data), GFP_KERNEL);
+		if (!init_ch) {
+			pr_err("%s: could not allocate CMU init structure \n", __func__);
+			kfree(cmu_ch);
+			kfree(clk_ch);
+			return -ENOMEM;
+		}
+
+		of_property_for_each_u32(node, "clock-indices", prop, p, index) {
+			of_property_read_string_index(node, "clock-names",
+							i, &clk_ch_name);
+			pr_info("%s: clkch <%s>, index %d, i %d\n", __func__, clk_ch_name, index, i);
+			init_ch[i].parent_names = &cmu->name;
+			init_ch[i].num_parents = 1;
+			init_ch[i].name = clk_ch_name;
+			init_ch[i].ops = &be_clk_pll_ops;
+			init_ch[i].flags = CLK_IGNORE_UNUSED;
+
+			cmu_ch[index] = kzalloc(sizeof(struct baikal_clk_cmu), GFP_KERNEL);
+			if (!cmu_ch[index]) {
+				pr_err("%s: could not allocate baikal_clk_cmu structure\n", __func__);
+				return -ENOMEM;
+			}
+			cmu_ch[index]->name = clk_ch_name;
+			cmu_ch[index]->cmu_id = index;
+			cmu_ch[index]->parent = cmu->cmu_id;
+			cmu_ch[index]->is_clk_ch = 1;
+			cmu_ch[index]->hw.init = &init_ch[i];
+			clk_ch->clks[index] = clk_register(NULL, &cmu_ch[index]->hw);
+
+			if (IS_ERR(clk_ch->clks[index])) {
+				pr_err("%s: could not register clk %s\n", __func__, clk_ch_name);
+			}
+
+			rc = clk_register_clkdev(clk_ch->clks[index], clk_ch_name, NULL);
+			if (rc != 0) {
+				pr_err("%s: could not register lookup clk %s\n",
+					__func__, clk_ch_name);
+			}
+
+			clk_prepare_enable(clk_ch->clks[index]);
+			i++;
+		}
+
+		return of_clk_add_provider(node, of_clk_src_onecell_get, clk_ch);
+	}
+
+	return of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+static void __init baikal_clk_init(struct device_node *np)
+{
+	int err;
+	err = baikal_clk_probe(np);
+	if (err) {
+		panic("%s: failed to probe clock %pOF: %d\n", __func__, np, err);
+	} else {
+		pr_info("%s: successfully probed %pOF\n", __func__, np);
+	}
+}
+CLK_OF_DECLARE_DRIVER(baikal_cmu, "baikal,cmu", baikal_clk_init);
+CLK_OF_DECLARE_DRIVER(bm1000_cmu, "baikal,bm1000-cmu", baikal_clk_init);
-- 
2.33.5



^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2022-12-16 12:40 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-14 13:18 [d-kernel] [PATCH 01/32] clk: added Baikal-M clock management unit driver Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 02/32] cpufreq-dt: don't load on Baikal-M SoC Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 03/32] serial: 8250_dw: verify clock rate in dw8250_set_termios Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 04/32] usb: dwc3: of-simple: added compatible string for Baikal-M SoC Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 05/32] dw-pcie: refuse to load on Baikal-M with recent firmware Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 06/32] arm64: Enable armv8 based Baikal-M SoC support Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 07/32] efi-rtc: avoid calling efi.get_time on Baikal-M SoC Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 08/32] arm64-stub: fixed secondary cores boot " Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 09/32] pm: disable all sleep states on Baikal-M based boards Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 10/32] net: fwnode_get_phy_id: consider all compatible strings Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 11/32] net: stmmac: inital support of Baikal-T1/M SoCs GMAC Alexey Sheplyakov
2022-12-14 13:18 ` [d-kernel] [PATCH 12/32] dt-bindings: dwmac: Add bindings for Baikal-T1/M SoCs Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 13/32] net: dwmac-baikal: added compatible strings Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 14/32] Added TF307/TF306 board management controller driver Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 15/32] hwmon: bt1-pvt: access registers via pvt_{readl, writel} helpers Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 16/32] hwmon: bt1-pvt: define pvt_readl/pvt_writel for Baikal-M SoC Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 17/32] hwmon: bt1-pvt: adjusted probing " Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 18/32] hwmon: bt1-pvt: added compatible baikal, pvt Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 19/32] drm: new bridge driver - stdp4028 Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 20/32] drm: added Baikal-M SoC video display unit driver Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 21/32] drm/bridge: dw-hdmi: support ahb audio hw revision 0x2a Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 22/32] dt-bindings: dw-hdmi: added ahb-audio-regshift Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 23/32] drm/bridge: dw-hdmi: force ahb audio register offset for Baikal-M Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 24/32] drm/panfrost: forcibly set dma-coherent on Baikal-M Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 25/32] drm/panfrost: disable devfreq " Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 26/32] ALSA: hda: Baikal-M support Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 27/32] PCI: pcie-baikal: driver for Baikal-M with new firmware Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 28/32] (BROKEN) dwc-i2s: support Baikal-M SoC Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 29/32] input: added TF307 serio PS/2 emulator driver Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 30/32] input: new driver - serdev-serio Alexey Sheplyakov
2022-12-14 13:19 ` [d-kernel] [PATCH 31/32] phy: realtek: leds configuration for RTL8211f Alexey Sheplyakov
2022-12-14 15:06 ` [d-kernel] [PATCH 01/32] clk: added Baikal-M clock management unit driver Vitaly Chikunov
2022-12-16  9:54   ` Alexey Sheplyakov
2022-12-16 12:34     ` Vitaly Chikunov
2022-12-16 12:40       ` Vitaly Chikunov

ALT Linux kernel packages development

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/devel-kernel/0 devel-kernel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 devel-kernel devel-kernel/ http://lore.altlinux.org/devel-kernel \
		devel-kernel@altlinux.org devel-kernel@altlinux.ru devel-kernel@altlinux.com
	public-inbox-index devel-kernel

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.devel-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git