From: Alexey Sheplyakov <asheplyakov@basealt.ru> To: devel-kernel@lists.altlinux.org Cc: "Роман Ставцев" <rst@basealt.ru>, "Игорь Чудов" <nir@basealt.ru>, "Евгений Синельников" <sin@basealt.ru>, "Дмитрий Терёхин" <jqt4@basealt.ru> Subject: [d-kernel] [PATCH 01/32] clk: added Baikal-M clock management unit driver Date: Wed, 14 Dec 2022 17:18:48 +0400 Message-ID: <20221214131919.681481-1-asheplyakov@basealt.ru> (raw) On Baikal-M SoC clock management unit (CMU) is controled by the firmware (ARM-TF), since the registers of CMU are accessible only to the secure world. This drivers is a shim which calls into the firmware. Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru> Co-developed-by: Ekaterina Skachko <ekaterina.skachko@baikalelectronics.ru> X-feature-Baikal-M --- drivers/clk/Makefile | 1 + drivers/clk/baikal-m/Makefile | 1 + drivers/clk/baikal-m/clk-baikal.c | 356 ++++++++++++++++++++++++++++++ 3 files changed, 358 insertions(+) create mode 100644 drivers/clk/baikal-m/Makefile create mode 100644 drivers/clk/baikal-m/clk-baikal.c diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e3ca0d058a25..37615a5ff451 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -83,6 +83,7 @@ obj-y += analogbits/ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ obj-$(CONFIG_ARCH_ARTPEC) += axis/ obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/ +obj-$(CONFIG_ARCH_BAIKAL) += baikal-m/ obj-$(CONFIG_CLK_BAIKAL_T1) += baikal-t1/ obj-y += bcm/ obj-$(CONFIG_ARCH_BERLIN) += berlin/ diff --git a/drivers/clk/baikal-m/Makefile b/drivers/clk/baikal-m/Makefile new file mode 100644 index 000000000000..56aa4de4081c --- /dev/null +++ b/drivers/clk/baikal-m/Makefile @@ -0,0 +1 @@ +obj-y += clk-baikal.o \ No newline at end of file diff --git a/drivers/clk/baikal-m/clk-baikal.c b/drivers/clk/baikal-m/clk-baikal.c new file mode 100644 index 000000000000..b3adcb727458 --- /dev/null +++ b/drivers/clk/baikal-m/clk-baikal.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * clk-baikal.c - Baikal-M clock driver. + * + * Copyright (C) 2015,2016,2020,2021 Baikal Electronics JSC + * Authors: + * Ekaterina Skachko <ekaterina.skachko@baikalelectronics.ru> + * Alexey Sheplyakov <asheplyakov@basealt.ru> + */ + +#include <linux/arm-smccc.h> +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> + +#define CMU_PLL_SET_RATE 0 +#define CMU_PLL_GET_RATE 1 +#define CMU_PLL_ENABLE 2 +#define CMU_PLL_DISABLE 3 +#define CMU_PLL_ROUND_RATE 4 +#define CMU_PLL_IS_ENABLED 5 +#define CMU_CLK_CH_SET_RATE 6 +#define CMU_CLK_CH_GET_RATE 7 +#define CMU_CLK_CH_ENABLE 8 +#define CMU_CLK_CH_DISABLE 9 +#define CMU_CLK_CH_ROUND_RATE 10 +#define CMU_CLK_CH_IS_ENABLED 11 + +struct baikal_clk_cmu { + struct clk_hw hw; + uint32_t cmu_id; + unsigned int parent; + const char *name; + uint32_t is_clk_ch; +}; + +#define to_baikal_cmu(_hw) container_of(_hw, struct baikal_clk_cmu, hw) + +/* Pointer to the place on handling SMC CMU calls in monitor */ +#define BAIKAL_SMC_LCRU_ID 0x82000000 + +static int baikal_clk_enable(struct clk_hw *hw) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + uint32_t cmd; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_ENABLE; + } else { + cmd = CMU_PLL_ENABLE; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0, + pclk->parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x): %s\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + res.a0 ? "error" : "ok"); + + return res.a0; +} + +static void baikal_clk_disable(struct clk_hw *hw) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + uint32_t cmd; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_DISABLE; + } else { + cmd = CMU_PLL_DISABLE; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0, + pclk->parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x): %s\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + res.a0 ? "error" : "ok"); +} + +static int baikal_clk_is_enabled(struct clk_hw *hw) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + uint32_t cmd; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_IS_ENABLED; + } else { + cmd = CMU_PLL_IS_ENABLED; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0, + pclk->parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x): %s\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + res.a0 ? "true" : "false"); + + return res.a0; +} + +static unsigned long baikal_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + uint32_t cmd; + unsigned long parent; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_GET_RATE; + parent = pclk->parent; + } else { + cmd = CMU_PLL_GET_RATE; + parent= parent_rate; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, 0, + parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x): %ld Hz\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + res.a0); + + return res.a0; +} + +static int baikal_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + uint32_t cmd; + unsigned long parent; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_SET_RATE; + parent = pclk->parent; + } else { + cmd = CMU_PLL_SET_RATE; + parent = parent_rate; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, rate, + parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x, %ld Hz): %s\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + rate, + res.a0 ? "error" : "ok"); + + return res.a0; +} + +static long baikal_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct arm_smccc_res res; + struct baikal_clk_cmu *pclk = to_baikal_cmu(hw); + unsigned long parent; + uint32_t cmd; + + if (pclk->is_clk_ch) { + cmd = CMU_CLK_CH_ROUND_RATE; + parent = pclk->parent; + } else { + cmd = CMU_PLL_ROUND_RATE; + parent = *prate; + } + + arm_smccc_smc(BAIKAL_SMC_LCRU_ID, pclk->cmu_id, cmd, rate, + parent, 0, 0, 0, &res); + + pr_debug("%s(%s, %s@0x%x): %ld Hz\n", + __func__, + pclk->name, + pclk->is_clk_ch ? "clkch" : "pll", + pclk->cmu_id, + res.a0); + + return res.a0; +} + +static const struct clk_ops be_clk_pll_ops = { + .enable = baikal_clk_enable, + .disable = baikal_clk_disable, + .is_enabled = baikal_clk_is_enabled, + .recalc_rate = baikal_clk_recalc_rate, + .set_rate = baikal_clk_set_rate, + .round_rate = baikal_clk_round_rate +}; + +static int __init baikal_clk_probe(struct device_node *node) +{ + struct clk_init_data init; + struct clk_init_data *init_ch; + struct baikal_clk_cmu *cmu; + struct baikal_clk_cmu **cmu_ch; + + struct clk *clk; + struct clk_onecell_data *clk_ch; + + int number, i = 0; + u32 rc, index; + struct property *prop; + const __be32 *p; + const char *clk_ch_name; + const char *parent_name; + + cmu = kzalloc(sizeof(struct baikal_clk_cmu), GFP_KERNEL); + if (!cmu) { + pr_err("%s: could not allocate CMU clk\n", __func__); + return -ENOMEM; + } + + of_property_read_string(node, "clock-output-names", &cmu->name); + of_property_read_u32(node, "clock-frequency", &cmu->parent); + of_property_read_u32(node, "cmu-id", &cmu->cmu_id); + + parent_name = of_clk_get_parent_name(node, 0); + + /* Setup clock init structure */ + init.parent_names = &parent_name; + init.num_parents = 1; + init.name = cmu->name; + init.ops = &be_clk_pll_ops; + init.flags = CLK_IGNORE_UNUSED; + + cmu->hw.init = &init; + cmu->is_clk_ch = 0; + + /* Register the clock */ + pr_debug("%s: add %s, parent %s\n", __func__, cmu->name, parent_name ? parent_name : "null"); + clk = clk_register(NULL, &cmu->hw); + + if (IS_ERR(clk)) { + pr_err("%s: could not register clk %s\n", __func__, cmu->name); + return -ENOMEM; + } + + /* Register the clock for lookup */ + rc = clk_register_clkdev(clk, cmu->name, NULL); + if (rc != 0) { + pr_err("%s: could not register lookup clk %s\n", + __func__, cmu->name); + } + + clk_prepare_enable(clk); + + number = of_property_count_u32_elems(node, "clock-indices"); + + if (number > 0) { + clk_ch = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_ch) { + pr_err("%s: could not allocate CMU clk channel\n", __func__); + return -ENOMEM; + } + + /* Get the last index to find out max number of children*/ + of_property_for_each_u32(node, "clock-indices", prop, p, index) { + ; + } + + clk_ch->clks = kcalloc(index + 1, sizeof(struct clk *), GFP_KERNEL); + clk_ch->clk_num = index + 1; + cmu_ch = kcalloc((index + 1), sizeof(struct baikal_clk_cmu *), GFP_KERNEL); + if (!cmu_ch) { + kfree(clk_ch); + return -ENOMEM; + } + init_ch = kcalloc((number + 1), sizeof(struct clk_init_data), GFP_KERNEL); + if (!init_ch) { + pr_err("%s: could not allocate CMU init structure \n", __func__); + kfree(cmu_ch); + kfree(clk_ch); + return -ENOMEM; + } + + of_property_for_each_u32(node, "clock-indices", prop, p, index) { + of_property_read_string_index(node, "clock-names", + i, &clk_ch_name); + pr_info("%s: clkch <%s>, index %d, i %d\n", __func__, clk_ch_name, index, i); + init_ch[i].parent_names = &cmu->name; + init_ch[i].num_parents = 1; + init_ch[i].name = clk_ch_name; + init_ch[i].ops = &be_clk_pll_ops; + init_ch[i].flags = CLK_IGNORE_UNUSED; + + cmu_ch[index] = kzalloc(sizeof(struct baikal_clk_cmu), GFP_KERNEL); + if (!cmu_ch[index]) { + pr_err("%s: could not allocate baikal_clk_cmu structure\n", __func__); + return -ENOMEM; + } + cmu_ch[index]->name = clk_ch_name; + cmu_ch[index]->cmu_id = index; + cmu_ch[index]->parent = cmu->cmu_id; + cmu_ch[index]->is_clk_ch = 1; + cmu_ch[index]->hw.init = &init_ch[i]; + clk_ch->clks[index] = clk_register(NULL, &cmu_ch[index]->hw); + + if (IS_ERR(clk_ch->clks[index])) { + pr_err("%s: could not register clk %s\n", __func__, clk_ch_name); + } + + rc = clk_register_clkdev(clk_ch->clks[index], clk_ch_name, NULL); + if (rc != 0) { + pr_err("%s: could not register lookup clk %s\n", + __func__, clk_ch_name); + } + + clk_prepare_enable(clk_ch->clks[index]); + i++; + } + + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_ch); + } + + return of_clk_add_provider(node, of_clk_src_simple_get, clk); +} + +static void __init baikal_clk_init(struct device_node *np) +{ + int err; + err = baikal_clk_probe(np); + if (err) { + panic("%s: failed to probe clock %pOF: %d\n", __func__, np, err); + } else { + pr_info("%s: successfully probed %pOF\n", __func__, np); + } +} +CLK_OF_DECLARE_DRIVER(baikal_cmu, "baikal,cmu", baikal_clk_init); +CLK_OF_DECLARE_DRIVER(bm1000_cmu, "baikal,bm1000-cmu", baikal_clk_init); -- 2.33.5
next reply other threads:[~2022-12-14 13:18 UTC|newest] Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-14 13:18 Alexey Sheplyakov [this message] 2022-12-14 13:18 ` [d-kernel] [PATCH 02/32] cpufreq-dt: don't load on Baikal-M SoC Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 03/32] serial: 8250_dw: verify clock rate in dw8250_set_termios Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 04/32] usb: dwc3: of-simple: added compatible string for Baikal-M SoC Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 05/32] dw-pcie: refuse to load on Baikal-M with recent firmware Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 06/32] arm64: Enable armv8 based Baikal-M SoC support Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 07/32] efi-rtc: avoid calling efi.get_time on Baikal-M SoC Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 08/32] arm64-stub: fixed secondary cores boot " Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 09/32] pm: disable all sleep states on Baikal-M based boards Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 10/32] net: fwnode_get_phy_id: consider all compatible strings Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 11/32] net: stmmac: inital support of Baikal-T1/M SoCs GMAC Alexey Sheplyakov 2022-12-14 13:18 ` [d-kernel] [PATCH 12/32] dt-bindings: dwmac: Add bindings for Baikal-T1/M SoCs Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 13/32] net: dwmac-baikal: added compatible strings Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 14/32] Added TF307/TF306 board management controller driver Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 15/32] hwmon: bt1-pvt: access registers via pvt_{readl, writel} helpers Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 16/32] hwmon: bt1-pvt: define pvt_readl/pvt_writel for Baikal-M SoC Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 17/32] hwmon: bt1-pvt: adjusted probing " Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 18/32] hwmon: bt1-pvt: added compatible baikal, pvt Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 19/32] drm: new bridge driver - stdp4028 Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 20/32] drm: added Baikal-M SoC video display unit driver Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 21/32] drm/bridge: dw-hdmi: support ahb audio hw revision 0x2a Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 22/32] dt-bindings: dw-hdmi: added ahb-audio-regshift Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 23/32] drm/bridge: dw-hdmi: force ahb audio register offset for Baikal-M Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 24/32] drm/panfrost: forcibly set dma-coherent on Baikal-M Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 25/32] drm/panfrost: disable devfreq " Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 26/32] ALSA: hda: Baikal-M support Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 27/32] PCI: pcie-baikal: driver for Baikal-M with new firmware Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 28/32] (BROKEN) dwc-i2s: support Baikal-M SoC Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 29/32] input: added TF307 serio PS/2 emulator driver Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 30/32] input: new driver - serdev-serio Alexey Sheplyakov 2022-12-14 13:19 ` [d-kernel] [PATCH 31/32] phy: realtek: leds configuration for RTL8211f Alexey Sheplyakov 2022-12-14 15:06 ` [d-kernel] [PATCH 01/32] clk: added Baikal-M clock management unit driver Vitaly Chikunov 2022-12-16 9:54 ` Alexey Sheplyakov 2022-12-16 12:34 ` Vitaly Chikunov 2022-12-16 12:40 ` Vitaly Chikunov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221214131919.681481-1-asheplyakov@basealt.ru \ --to=asheplyakov@basealt.ru \ --cc=devel-kernel@lists.altlinux.org \ --cc=jqt4@basealt.ru \ --cc=nir@basealt.ru \ --cc=rst@basealt.ru \ --cc=sin@basealt.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux kernel packages development This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/devel-kernel/0 devel-kernel/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 devel-kernel devel-kernel/ http://lore.altlinux.org/devel-kernel \ devel-kernel@altlinux.org devel-kernel@altlinux.ru devel-kernel@altlinux.com public-inbox-index devel-kernel Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.devel-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git