* [Comm] p2p клиент наподобие xMule @ 2005-10-18 17:38 Olvin 2005-10-18 18:04 ` Владимир Гусев ` (3 more replies) 0 siblings, 4 replies; 23+ messages in thread From: Olvin @ 2005-10-18 17:38 UTC (permalink / raw) To: community xMule больше не могу пользоваться. Сегодня вообще не смог законнектиться. Почти на всех серверах говорит, что, мол, версия моего клиента слишком старая. А сегодня вообще начало выдавать (иногда) какую-то фатальную ошибку. Посмотреть не могу - только завтра на работе. На mldonkey тоже ругается. Выкачал aMule и lmule. Попробовал собрать lmule из тамошних src.rpm - ошибка. Нет gdkconfig.h. Кроме того, в /usr/include пришлось симлинки делать на некоторые каталоги (и подкаталоги с файлами!). Но этот gdkconfig.h я уже не знаю, где искать. Может, подскажете, в каком пакете? С aMule из тарбола - похожая ситуация. Там даже спек был, но он для SuSe и у меня не пошёл. Пришлось руками. Но не вышло. Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов есть версии? ;) Или у кого есть собраный (aMule или lmule)? ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin @ 2005-10-18 18:04 ` Владимир Гусев 2005-10-18 18:13 ` Re[2]: " Denis Yatsutko ` (2 more replies) 2005-10-19 6:12 ` Alex Gorbachenko ` (2 subsequent siblings) 3 siblings, 3 replies; 23+ messages in thread From: Владимир Гусев @ 2005-10-18 18:04 UTC (permalink / raw) To: ALT Linux Community > xMule больше не могу пользоваться. Сегодня вообще не смог > законнектиться. Почти на всех серверах говорит, что, мол, версия моего > клиента слишком старая. А сегодня вообще начало выдавать (иногда) > какую-то фатальную ошибку. Посмотреть не могу - только завтра на работе. Странно.. Уже больше года пользуюсь - проблем не было ни разу.. нынешняя версия xMule из Мастера 2.4 - 1.8.4 Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. -- С уважением, Владимир Гусев ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re[2]: [Comm] p2p клиент наподобие xMule 2005-10-18 18:04 ` Владимир Гусев @ 2005-10-18 18:13 ` Denis Yatsutko 2005-10-18 18:25 ` Alexander Kubatkin 2005-10-19 7:09 ` Olvin 2005-10-19 9:07 ` Olvin 2 siblings, 1 reply; 23+ messages in thread From: Denis Yatsutko @ 2005-10-18 18:13 UTC (permalink / raw) To: ALT Linux Community > Странно.. Уже больше года пользуюсь - проблем не было ни разу.. нынешняя > версия xMule из Мастера 2.4 - 1.8.4 > Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. Та же фигня. Пробовал ещё KMLdonkey, но xMule показался значительно удобнее. --- http://denisbooks.lenin.ru ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 18:13 ` Re[2]: " Denis Yatsutko @ 2005-10-18 18:25 ` Alexander Kubatkin 2005-10-18 18:38 ` Владимир Гусев 2005-10-19 7:22 ` Dmitry Kovalev 0 siblings, 2 replies; 23+ messages in thread From: Alexander Kubatkin @ 2005-10-18 18:25 UTC (permalink / raw) To: Denis Yatsutko, ALT Linux Community On Tuesday 18 October 2005 22:13, Denis Yatsutko wrote: > > Странно.. Уже больше года пользуюсь - проблем не было ни разу.. > > нынешняя версия xMule из Мастера 2.4 - 1.8.4 > > Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. > > Та же фигня. > Пробовал ещё KMLdonkey, но xMule показался значительно удобнее. разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему? куда лучше иметь в системе демона, к которому можно подключиться хоть telnet'ом, хоть через web, найти/добавить/удалить закачку и отключиться от него, а он уже потом пришлет письмо, что мол скачал то-то и положил туда-то... причем kmldonkey удобнее telnet'а только в плане поиска, не более, все остальное можно и телнетом делать :) при этом kmldonkey - это ведь всего-лишь интерфейс, т.е. ему не надо все время висеть в системе, чтобы mldonkey работал. -- Alexander Kubatkin ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 18:25 ` Alexander Kubatkin @ 2005-10-18 18:38 ` Владимир Гусев 2005-10-19 7:22 ` Dmitry Kovalev 1 sibling, 0 replies; 23+ messages in thread From: Владимир Гусев @ 2005-10-18 18:38 UTC (permalink / raw) To: _kaa_, ALT Linux Community >>> Странно.. Уже больше года пользуюсь - проблем не было ни разу.. >>> нынешняя версия xMule из Мастера 2.4 - 1.8.4 >>> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. >> Пробовал ещё KMLdonkey, но xMule показался значительно удобнее. > разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему? Может.. xMule.. :) А вообще - это сугубо индивидуально.. -- С уважением, Владимир Гусев ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 18:25 ` Alexander Kubatkin 2005-10-18 18:38 ` Владимир Гусев @ 2005-10-19 7:22 ` Dmitry Kovalev 1 sibling, 0 replies; 23+ messages in thread From: Dmitry Kovalev @ 2005-10-19 7:22 UTC (permalink / raw) To: community On Tue, 18 Oct 2005 22:25:37 +0400 Alexander Kubatkin wrote: > On Tuesday 18 October 2005 22:13, Denis Yatsutko wrote: > разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему? Да. mldonkey и веб-интерфейс ;) http://localhost:4080/ и забыл что есть есть внешние клиенты... В остальном -- согласен полностью. Сейчас подключен (mldonkey-2.6.4), работает. Хотя любимые сервера типа Razorback 2 и Donkey Server No 1 не согласились меня сегодня принять, но новая "звезда" Sonny Boy 1 (64.34.162.87:5221) -- коннект нормальный. :) -- С уважением, Дмитрий Ковалёв. ICQ UIN: 40912331 Jabber: mercy@jabber.ru Gentoo Base System version 1.6.13 ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 18:04 ` Владимир Гусев 2005-10-18 18:13 ` Re[2]: " Denis Yatsutko @ 2005-10-19 7:09 ` Olvin 2005-10-19 8:03 ` Владимир Гусев 2005-10-19 8:09 ` [Comm] " Alexey Morsov 2005-10-19 9:07 ` Olvin 2 siblings, 2 replies; 23+ messages in thread From: Olvin @ 2005-10-19 7:09 UTC (permalink / raw) To: ALT Linux Community [-- Attachment #1: Type: text/plain, Size: 1248 bytes --] Владимир Гусев wrote: >> xMule больше не могу пользоваться. Сегодня вообще не смог >> законнектиться. Почти на всех серверах говорит, что, мол, версия >> моего клиента слишком старая. А сегодня вообще начало выдавать >> (иногда) какую-то фатальную ошибку. Посмотреть не могу - только >> завтра на работе. > Странно.. Уже больше года пользуюсь - проблем не было ни разу.. > нынешняя версия xMule из Мастера 2.4 - 1.8.4 > Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. У меня до поры-до времени тоже был порядок. Сначала я попробовал mldonkey. Не пошло с теми же сообщениями об устаревшей версии (т.е. оно не валилось, но с сетью не контачило). Выкачал и скомпилировал с оф. сайта. Заработало. Потом решил попробовать xmule. Всё ОК (только многие отлуп давали по той же причине). А вчера вообще не получилось подключиться. На работе LowID. Дома HiID и вроде бы работает сносно, хотя ругань продолжается. короче, запускаю xmule. Жму Update (обновить список серверов). Далее, жму Connect. Лог во вложении. Кстати, про какую ещё опцию он постоянно говорит? 2005-10-19 10:03:18: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. [-- Attachment #2: xmule-log.txt --] [-- Type: text/plain, Size: 14809 bytes --] 2005-10-19 09:58:56: Loaded ipfilter with 0 IP addresses. 2005-10-19 09:58:56: 16 servers in server.met found 2005-10-19 09:58:56: No part files found 2005-10-19 09:58:56: Found 35 part files 2005-10-19 09:58:56: xMule 1.8.4 2005-10-19 09:59:00: Found 1591 known shared files 2005-10-19 09:59:09: 0 servers added, 11 not added (already listed/invalid) 2005-10-19 10:03:04: Connecting 2005-10-19 10:03:04: Disconnected 2005-10-19 10:03:04: Connecting to Razorback 2.0 (195.245.244.243:4661)... 2005-10-19 10:03:04: Connected to Razorback 2.0 (195.245.244.243:4661), sending login request 2005-10-19 10:03:04: Connecting to DonkeyServer No1 (62.241.53.2:4242)... 2005-10-19 10:03:05: Connected to DonkeyServer No1 (62.241.53.2:4242), sending login request 2005-10-19 10:03:18: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. Razorback 2.0 (195.245.244.243:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:03:18: Lost connection to Razorback 2.0 (195.245.244.243:4661) 2005-10-19 10:03:20: ïÛÉÂËÁ DonkeyServer No1 (62.241.53.2:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:03:20: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. DonkeyServer No1 (62.241.53.2:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:03:20: Lost connection to DonkeyServer No1 (62.241.53.2:4242) 2005-10-19 10:03:29: Connection attempt to Razorback 2.0 (195.245.244.243:4661 ) timed out 2005-10-19 10:03:29: Connecting to BiG BanG 9 (80.239.200.108:3000)... 2005-10-19 10:03:29: Connection attempt to DonkeyServer No1 (62.241.53.2:4242 ) timed out 2005-10-19 10:03:29: Connecting to DonkeyServer No2 (62.241.53.16:4242)... 2005-10-19 10:03:30: Connected to BiG BanG 9 (80.239.200.108:3000), sending login request 2005-10-19 10:03:30: Connected to DonkeyServer No2 (62.241.53.16:4242), sending login request 2005-10-19 10:03:45: ïÛÉÂËÁ DonkeyServer No2 (62.241.53.16:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:03:45: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. DonkeyServer No2 (62.241.53.16:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:03:45: Lost connection to DonkeyServer No2 (62.241.53.16:4242) 2005-10-19 10:03:45: ïÛÉÂËÁ BiG BanG 9 (80.239.200.108:3000) - : Your edonkey client is too old, please update it 2005-10-19 10:03:45: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. BiG BanG 9 (80.239.200.108:3000) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:03:45: Lost connection to BiG BanG 9 (80.239.200.108:3000) 2005-10-19 10:03:55: Connection attempt to BiG BanG 9 (80.239.200.108:3000 ) timed out 2005-10-19 10:03:55: Connecting to DonkeyServer No5 (62.241.53.4:4242)... 2005-10-19 10:03:55: Connection attempt to DonkeyServer No2 (62.241.53.16:4242 ) timed out 2005-10-19 10:03:55: Connecting to ChezToff (Serveur Fr) (213.186.60.106:4661)... 2005-10-19 10:03:56: Connected to ChezToff (Serveur Fr) (213.186.60.106:4661), sending login request 2005-10-19 10:03:56: Connected to DonkeyServer No5 (62.241.53.4:4242), sending login request 2005-10-19 10:04:10: ïÛÉÂËÁ ChezToff (Serveur Fr) (213.186.60.106:4661) - : Your edonkey client is too old, please update it 2005-10-19 10:04:10: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. ChezToff (Serveur Fr) (213.186.60.106:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:04:10: Lost connection to ChezToff (Serveur Fr) (213.186.60.106:4661) 2005-10-19 10:04:11: ïÛÉÂËÁ DonkeyServer No5 (62.241.53.4:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:04:11: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. DonkeyServer No5 (62.241.53.4:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:04:11: Lost connection to DonkeyServer No5 (62.241.53.4:4242) 2005-10-19 10:04:21: Connection attempt to DonkeyServer No5 (62.241.53.4:4242 ) timed out 2005-10-19 10:04:21: Connecting to !-= www.FreeOxxx.com =-! (83.149.117.56:4321)... 2005-10-19 10:04:21: Connection attempt to ChezToff (Serveur Fr) (213.186.60.106:4661 ) timed out 2005-10-19 10:04:21: Connecting to BiG BanG 11 (80.239.200.110:3000)... 2005-10-19 10:04:21: Connected to BiG BanG 11 (80.239.200.110:3000), sending login request 2005-10-19 10:04:21: Connected to !-= www.FreeOxxx.com =-! (83.149.117.56:4321), sending login request 2005-10-19 10:04:34: ïÛÉÂËÁ BiG BanG 11 (80.239.200.110:3000) - : Your edonkey client is too old, please update it 2005-10-19 10:04:35: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. BiG BanG 11 (80.239.200.110:3000) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:04:35: Lost connection to BiG BanG 11 (80.239.200.110:3000) 2005-10-19 10:04:35: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. !-= www.FreeOxxx.com =-! (83.149.117.56:4321) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:04:35: Lost connection to !-= www.FreeOxxx.com =-! (83.149.117.56:4321) 2005-10-19 10:04:46: Connection attempt to !-= www.FreeOxxx.com =-! (83.149.117.56:4321 ) timed out 2005-10-19 10:04:46: Connecting to <<< Saugcenter >>> (80.190.233.144:6565)... 2005-10-19 10:04:46: Connection attempt to BiG BanG 11 (80.239.200.110:3000 ) timed out 2005-10-19 10:04:46: Connecting to DonkeyServer No3 (62.241.53.17:4242)... 2005-10-19 10:04:46: Connected to DonkeyServer No3 (62.241.53.17:4242), sending login request 2005-10-19 10:04:46: Connected to <<< Saugcenter >>> (80.190.233.144:6565), sending login request 2005-10-19 10:05:02: ïÛÉÂËÁ <<< Saugcenter >>> (80.190.233.144:6565) - : Your edonkey client is too old, please update it 2005-10-19 10:05:02: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. <<< Saugcenter >>> (80.190.233.144:6565) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:02: Lost connection to <<< Saugcenter >>> (80.190.233.144:6565) 2005-10-19 10:05:02: ïÛÉÂËÁ DonkeyServer No3 (62.241.53.17:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:05:02: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. DonkeyServer No3 (62.241.53.17:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:02: Lost connection to DonkeyServer No3 (62.241.53.17:4242) 2005-10-19 10:05:12: Connection attempt to <<< Saugcenter >>> (80.190.233.144:6565 ) timed out 2005-10-19 10:05:12: Connecting to Razorback 2.1 (195.245.244.244:3000)... 2005-10-19 10:05:12: Connection attempt to DonkeyServer No3 (62.241.53.17:4242 ) timed out 2005-10-19 10:05:12: Connecting to BiG BanG 6 (80.239.200.105:3000)... 2005-10-19 10:05:12: Connected to BiG BanG 6 (80.239.200.105:3000), sending login request 2005-10-19 10:05:13: Connected to Razorback 2.1 (195.245.244.244:3000), sending login request 2005-10-19 10:05:27: ïÛÉÂËÁ BiG BanG 6 (80.239.200.105:3000) - : Your edonkey client is too old, please update it 2005-10-19 10:05:27: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. BiG BanG 6 (80.239.200.105:3000) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:27: Lost connection to BiG BanG 6 (80.239.200.105:3000) 2005-10-19 10:05:29: ïÛÉÂËÁ Razorback 2.1 (195.245.244.244:3000) - : Your edonkey client is too old, please update it 2005-10-19 10:05:29: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. Razorback 2.1 (195.245.244.244:3000) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:29: Lost connection to Razorback 2.1 (195.245.244.244:3000) 2005-10-19 10:05:37: Connection attempt to Razorback 2.1 (195.245.244.244:3000 ) timed out 2005-10-19 10:05:37: Connecting to Breizh Digitalus (213.186.47.84:4661)... 2005-10-19 10:05:37: Connection attempt to BiG BanG 6 (80.239.200.105:3000 ) timed out 2005-10-19 10:05:37: Connecting to »FPRO« (213.251.161.103:4661)... 2005-10-19 10:05:37: Connected to »FPRO« (213.251.161.103:4661), sending login request 2005-10-19 10:05:37: Connected to Breizh Digitalus (213.186.47.84:4661), sending login request 2005-10-19 10:05:53: ïÛÉÂËÁ »FPRO« (213.251.161.103:4661) - : Your edonkey client is too old, please update it 2005-10-19 10:05:53: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. »FPRO« (213.251.161.103:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:53: Lost connection to »FPRO« (213.251.161.103:4661) 2005-10-19 10:05:53: ïÛÉÂËÁ Breizh Digitalus (213.186.47.84:4661) - : Your edonkey client is too old, please update it 2005-10-19 10:05:53: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. Breizh Digitalus (213.186.47.84:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:05:53: Lost connection to Breizh Digitalus (213.186.47.84:4661) 2005-10-19 10:06:02: Connection attempt to »FPRO« (213.251.161.103:4661 ) timed out 2005-10-19 10:06:02: Connecting to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242)... 2005-10-19 10:06:02: Connection attempt to Breizh Digitalus (213.186.47.84:4661 ) timed out 2005-10-19 10:06:02: Connecting to www.UseNeXT.to (212.112.243.146:4661)... 2005-10-19 10:06:03: Connected to www.UseNeXT.to (212.112.243.146:4661), sending login request 2005-10-19 10:06:04: Connected to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242), sending login request 2005-10-19 10:06:14: ïÛÉÂËÁ www.UseNeXT.to (212.112.243.146:4661) - : Your edonkey client is too old, please update it 2005-10-19 10:06:14: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. www.UseNeXT.to (212.112.243.146:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:06:14: Lost connection to www.UseNeXT.to (212.112.243.146:4661) 2005-10-19 10:06:17: ïÛÉÂËÁ *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:06:17: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:06:17: Lost connection to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242) 2005-10-19 10:06:28: Connection attempt to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242 ) timed out 2005-10-19 10:06:28: Connection attempt to www.UseNeXT.to (212.112.243.146:4661 ) timed out 2005-10-19 10:06:28: Failed to connect to all servers listed. Making another pass. 2005-10-19 10:06:28: Disconnected 2005-10-19 10:06:28: Connecting to Razorback 2.0 (195.245.244.243:4661)... 2005-10-19 10:06:28: Connected to Razorback 2.0 (195.245.244.243:4661), sending login request 2005-10-19 10:06:29: Connecting to DonkeyServer No1 (62.241.53.2:4242)... 2005-10-19 10:06:29: Connected to DonkeyServer No1 (62.241.53.2:4242), sending login request 2005-10-19 10:06:42: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. Razorback 2.0 (195.245.244.243:4661) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:06:42: Lost connection to Razorback 2.0 (195.245.244.243:4661) 2005-10-19 10:06:44: ïÛÉÂËÁ DonkeyServer No1 (62.241.53.2:4242) - : Your edonkey client is too old, please update it 2005-10-19 10:06:44: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself. xMule will run fine without adjusting any of these settings. DonkeyServer No1 (62.241.53.2:4242) - : You have a lowid. Please review your network config and/or your settings. 2005-10-19 10:06:44: Lost connection to DonkeyServer No1 (62.241.53.2:4242) 2005-10-19 10:06:53: Connection attempt to Razorback 2.0 (195.245.244.243:4661 ) timed out 2005-10-19 10:06:53: Connecting to BiG BanG 9 (80.239.200.108:3000)... 2005-10-19 10:06:53: Connected to BiG BanG 9 (80.239.200.108:3000), sending login request 2005-10-19 10:06:54: Connection attempt to DonkeyServer No1 (62.241.53.2:4242 ) timed out 2005-10-19 10:06:54: Connecting to DonkeyServer No2 (62.241.53.16:4242)... 2005-10-19 10:06:54: Fatal Error while trying to connect. Internet connection might be down 2005-10-19 10:06:54: Disconnected 2005-10-19 10:06:54: Disconnected ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 7:09 ` Olvin @ 2005-10-19 8:03 ` Владимир Гусев 2005-10-19 8:10 ` [Comm] [JT] " Olvin 2005-10-19 8:09 ` [Comm] " Alexey Morsov 1 sibling, 1 reply; 23+ messages in thread From: Владимир Гусев @ 2005-10-19 8:03 UTC (permalink / raw) To: ALT Linux Community >>> xMule больше не могу пользоваться. Сегодня вообще не смог >>> законнектиться. Почти на всех серверах говорит, что, мол, версия >>> моего клиента слишком старая. А сегодня вообще начало выдавать >>> (иногда) какую-то фатальную ошибку. >> Странно.. Уже больше года пользуюсь - проблем не было ни разу.. >> нынешняя версия xMule из Мастера 2.4 - 1.8.4 >> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. > У меня до поры-до времени тоже был порядок.короче, запускаю xmule. Жму > Update (обновить список серверов). Далее, > жму Connect. > Лог во вложении. Никакого "лога во вложении" нет, а есть очень длинные письма.. Лучше сохраняйте выводы консоли в текст и gzip его.. Письмо будет в разы меньше.. -- С уважением, Владимир Гусев ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] [JT] p2p клиент наподобие xMule 2005-10-19 8:03 ` Владимир Гусев @ 2005-10-19 8:10 ` Olvin 0 siblings, 0 replies; 23+ messages in thread From: Olvin @ 2005-10-19 8:10 UTC (permalink / raw) To: ALT Linux Community Владимир Гусев wrote: >> У меня до поры-до времени тоже был порядок.короче, запускаю xmule. >> Жму Update (обновить список серверов). Далее, >> жму Connect. >> Лог во вложении. > Никакого "лога во вложении" нет, а есть очень длинные письма.. Лучше > сохраняйте выводы консоли в текст и gzip его.. Письмо будет в разы меньше.. Извиняюсь. Просто в спешке забыл это сделать. Исправлюсь. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 7:09 ` Olvin 2005-10-19 8:03 ` Владимир Гусев @ 2005-10-19 8:09 ` Alexey Morsov 2005-10-19 8:07 ` Olvin 1 sibling, 1 reply; 23+ messages in thread From: Alexey Morsov @ 2005-10-19 8:09 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 522 bytes --] On Wed, 19 Oct 2005 10:09:51 +0300 Olvin <olvin@rambler.ru> wrote: > подключиться. На работе LowID. Дома HiID и вроде бы работает сносно, lowid хы - многие серваки не дают конект lowid :) Порты открыть надо однако :) -- С уважением, Алексей Морсов системный администратор ЗАО "ИК "Риком-Траст" ICQ: 196-766-290 Jabber: samurai@www.fondmarket.ru www.ricom.ru www.fondmarket.ru <aen> Voins: btw, эти видеоролики под creative common license. можно запаковать :-) <Nikon> aen: только не в сизиф! :) [-- Attachment #2: Type: application/pgp-signature, Size: 482 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 8:09 ` [Comm] " Alexey Morsov @ 2005-10-19 8:07 ` Olvin 2005-10-19 8:23 ` Alexey Morsov 0 siblings, 1 reply; 23+ messages in thread From: Olvin @ 2005-10-19 8:07 UTC (permalink / raw) To: ALT Linux Community Alexey Morsov wrote: >>подключиться. На работе LowID. Дома HiID и вроде бы работает сносно, > lowid хы - многие серваки не дают конект lowid :) Порты открыть надо > однако :) Во-первых, работало. Во-вторых, с другим клиентом более-менее ОК, при прочих равных сетевых условиях. В третьих, firewall не мой :) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 8:07 ` Olvin @ 2005-10-19 8:23 ` Alexey Morsov 0 siblings, 0 replies; 23+ messages in thread From: Alexey Morsov @ 2005-10-19 8:23 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 649 bytes --] On Wed, 19 Oct 2005 11:07:54 +0300 Olvin <olvin@rambler.ru> wrote: > Во-первых, работало. Во-вторых, с другим клиентом более-менее ОК, при не канает - то как оно с lowid работает - уж лучше бы вообще не работало :) > прочих равных сетевых условиях. В третьих, firewall не мой :) ^^^^^^^^^^ Вот это аргумент железный :( -- С уважением, Алексей Морсов системный администратор ЗАО "ИК "Риком-Траст" ICQ: 196-766-290 Jabber: samurai@www.fondmarket.ru www.ricom.ru www.fondmarket.ru <aen> DOC_: сейчас весь talk-room -- сплошная фортунка :-) Для пакета fortunes-morons. [-- Attachment #2: Type: application/pgp-signature, Size: 482 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 18:04 ` Владимир Гусев 2005-10-18 18:13 ` Re[2]: " Denis Yatsutko 2005-10-19 7:09 ` Olvin @ 2005-10-19 9:07 ` Olvin 2005-10-19 9:10 ` Re[2]: " Denis Yatsutko 2 siblings, 1 reply; 23+ messages in thread From: Olvin @ 2005-10-19 9:07 UTC (permalink / raw) To: ALT Linux Community Владимир Гусев wrote: >> xMule больше не могу пользоваться. Сегодня вообще не смог >> законнектиться. Почти на всех серверах говорит, что, мол, версия >> моего клиента слишком старая. А сегодня вообще начало выдавать >> (иногда) какую-то фатальную ошибку. Посмотреть не могу - только >> завтра на работе. > Странно.. Уже больше года пользуюсь - проблем не было ни разу.. > нынешняя версия xMule из Мастера 2.4 - 1.8.4 > Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка.. Не поверите. Выкачал http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем 1.8 в ALM2.4. :) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re[2]: [Comm] p2p клиент наподобие xMule 2005-10-19 9:07 ` Olvin @ 2005-10-19 9:10 ` Denis Yatsutko 2005-10-19 9:22 ` Olvin 0 siblings, 1 reply; 23+ messages in thread From: Denis Yatsutko @ 2005-10-19 9:10 UTC (permalink / raw) To: ALT Linux Community > http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm > По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем > 1.8 в ALM2.4. :) Если не секрет, чем? --- http://denisbooks.lenin.ru ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 9:10 ` Re[2]: " Denis Yatsutko @ 2005-10-19 9:22 ` Olvin 0 siblings, 0 replies; 23+ messages in thread From: Olvin @ 2005-10-19 9:22 UTC (permalink / raw) To: Denis Yatsutko, ALT Linux Community Denis Yatsutko wrote: >>http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm >>По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем >>1.8 в ALM2.4. :) > Если не секрет, чем? Интерфейсом. Например, поиск. Организовано почти как в KmlDonkey - вкладками. Кстати, как я посмотрел, он же lmule 1.2.x :) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin 2005-10-18 18:04 ` Владимир Гусев @ 2005-10-19 6:12 ` Alex Gorbachenko 2005-10-19 6:46 ` Olvin 2005-10-19 6:58 ` Olvin 2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin 3 siblings, 1 reply; 23+ messages in thread From: Alex Gorbachenko @ 2005-10-19 6:12 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 245 bytes --] On Tue, 18 Oct 2005 20:38:13 +0300 Olvin wrote: O>С aMule из тарбола - похожая ситуация. Там даже спек был, но он для O>SuSe и у меня не пошёл. Пришлось руками. Но не вышло. в сизифе лежит amule. давно уж. -- np: Crematory - Away [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 6:12 ` Alex Gorbachenko @ 2005-10-19 6:46 ` Olvin 0 siblings, 0 replies; 23+ messages in thread From: Olvin @ 2005-10-19 6:46 UTC (permalink / raw) To: ALT Linux Community Alex Gorbachenko wrote: > O>С aMule из тарбола - похожая ситуация. Там даже спек был, но он для > O>SuSe и у меня не пошёл. Пришлось руками. Но не вышло. > в сизифе лежит amule. давно уж. Который не поставить без основательного обсизифливания системы. Уже смотрел. От требует то, чего я ему могу, но не хочу давать :) ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin 2005-10-18 18:04 ` Владимир Гусев 2005-10-19 6:12 ` Alex Gorbachenko @ 2005-10-19 6:58 ` Olvin 2005-10-19 7:30 ` Alex Gorbachenko 2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov 2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin 3 siblings, 2 replies; 23+ messages in thread From: Olvin @ 2005-10-19 6:58 UTC (permalink / raw) To: ALT Linux Community [-- Attachment #1: Type: text/plain, Size: 1627 bytes --] Olvin wrote: > С aMule из тарбола - похожая ситуация. Там даже спек был, но он для SuSe > и у меня не пошёл. Пришлось руками. Но не вышло. > Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов > есть версии? ;) Итак, разбор полётов. [olvin@enigma amule]$ pwd /home/olvin/work/amule [olvin@enigma amule]$ ls aMule-2.0.3.tar.bz2 [olvin@enigma amule]$ tar -xjf aMule-2.0.3.tar.bz2 [olvin@enigma amule]$ $ cd aMule-2.0.3 [olvin@enigma aMule-2.0.3]$ ./configure --enable-static \ --enable-amule-daemon --enable-amulecmd \ --enable-amulecmdgui --enable-webserver \ --enable-webservergui --enable-amule-gui \ --enable-alc --enable-alcc --enable-utf8-systray \ --with-x --with-included-gettext |tee ~/amule.configure-out.txt ... Вывод во вложении. ... [olvin@enigma aMule-2.0.3]$ make |tee ~/amule.make-out.txt ... Вывод во вложении. ... i586-alt-linux-g++: /usr/lib/libwx_gtk-2.4.a: No such file or directory make[5]: *** [alc] Ошибка 1 make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src' make[4]: *** [all-recursive] Ошибка 1 make[3]: *** [all-recursive] Ошибка 1 make[2]: *** [all-recursive] Ошибка 1 make[1]: *** [all-recursive] Ошибка 1 make: *** [all] Ошибка 2 make[4]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator' make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils' make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src' make[1]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3' [olvin@enigma aMule-2.0.3]$ Так вот. Что делать? Чего ему не хватает? В каком пакете этот *.a брать? [-- Attachment #2: amule.configure-out.txt --] [-- Type: text/plain, Size: 15684 bytes --] checking build system type... i686-pc-linux checking host system type... i686-pc-linux checking target system type... i686-pc-linux checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for g++... g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking whether make sets $(MAKE)... (cached) yes checking for a BSD-compatible install... /usr/bin/ginstall -c checking for ranlib... ranlib checking for bison... bison -y checking whether ln -s works... yes checking for ranlib... (cached) ranlib checking for strip... strip checking for ar... ar checking for ld... ld checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for zlib >= 1.1.4... yes (version 1.2.3) checking for libpng-config... /usr/bin/libpng-config checking for libpng version >= 1.2.0... yes (version 1.2.8) checking gd.h usability... no checking gd.h presence... no checking for gd.h... no configure: WARNING: libpng-devel >= 1.2.0 is needed for amuleweb checking whether we need the GUI... yes checking for wx-config... /usr/bin/wx-config checking for wxWidgets version >= 2.4.2... yes (version 2.4.2) checking for wxbase-2.4-config... no checking for GUI toolkit to use... GTK checking if wxWidgets was linked with GTK2... no checking for gtk-config... /usr/bin/gtk-config checking for GTK - version >= 1.2.0... yes checking whether to use embedded Crypto... yes checking for bfd headers... no configure: WARNING: bfd.h not found, please install binutils development package if you are a developer or want to help testing aMule checking for autopoint... yes (4.1) checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for working alloca.h... yes checking for alloca... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking mntent.h usability... yes checking mntent.h presence... yes checking for mntent.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking stdio_ext.h usability... yes checking stdio_ext.h presence... yes checking for stdio_ext.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/mount.h usability... yes checking sys/mount.h presence... yes checking for sys/mount.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/statvfs.h usability... yes checking sys/statvfs.h presence... yes checking for sys/statvfs.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for stdbool.h that conforms to C99... no checking for _Bool... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for uid_t in sys/types.h... yes checking for working volatile... yes checking for ptrdiff_t... yes checking whether closedir returns void... no checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for library containing strerror... none required checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking whether we are using the GNU C Library 2.1 or newer... yes checking whether integer division by zero raises SIGFPE... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unsigned long long... yes checking for inttypes.h... yes checking whether the inttypes.h PRIxNN macros are broken... no checking for ld used by GCC... ld checking if the linker (ld) is GNU ld... yes checking for shared library run path origin... done checking for argz.h... (cached) yes checking for limits.h... (cached) yes checking for locale.h... (cached) yes checking nl_types.h usability... yes checking nl_types.h presence... yes checking for nl_types.h... yes checking for malloc.h... (cached) yes checking for stddef.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... (cached) yes checking for feof_unlocked... yes checking for fgets_unlocked... yes checking for getc_unlocked... yes checking for getcwd... yes checking for getegid... yes checking for geteuid... yes checking for getgid... yes checking for getuid... yes checking for mempcpy... yes checking for munmap... yes checking for putenv... yes checking for setenv... yes checking for setlocale... yes checking for stpcpy... yes checking for strcasecmp... yes checking for strdup... yes checking for strtoul... yes checking for tsearch... yes checking for __argz_count... yes checking for __argz_stringify... yes checking for __argz_next... yes checking for iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for nl_langinfo and CODESET... yes checking for LC_MESSAGES... yes checking for bison... bison checking version of bison... 1.875, ok checking whether NLS is requested... yes checking whether included gettext is requested... yes checking for getmntent in -lsun... no checking for getmntent in -lseq... no checking for getmntent in -lgen... no checking for getmntent... yes checking whether gcc needs -traditional... no checking for pid_t... yes checking for unistd.h... (cached) yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking whether lstat dereferences a symlink specified with a trailing slash... yes checking whether lstat accepts an empty string... no checking whether lstat dereferences a symlink specified with a trailing slash... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for working memcmp... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... (cached) yes checking for working mmap... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking for function prototypes... yes checking whether setvbuf arguments are reversed... no checking return type of signal handlers... void checking whether stat accepts an empty string... no checking for strftime... yes checking for working strtod... yes checking for __argz_count... (cached) yes checking for __argz_next... (cached) yes checking for __argz_stringify... (cached) yes checking for endpwent... yes checking for floor... no checking for ftruncate... yes checking for getcwd... (cached) yes checking for gethostbyaddr... yes checking for gethostbyname... yes checking for gethostname... yes checking for getmntent... (cached) yes checking for getmntinfo... no checking for getpass... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memmove... yes checking for mempcpy... (cached) yes checking for memset... yes checking for munmap... (cached) yes checking for nl_langinfo... yes checking for select... yes checking for setlocale... (cached) yes checking for socket... yes checking for sqrt... no checking for stpcpy... (cached) yes checking for strcasecmp... (cached) yes checking for strchr... yes checking for strcspn... yes checking for strdup... (cached) yes checking for strerror... yes checking for strncasecmp... yes checking for strstr... yes checking for strtoul... (cached) yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/timeb.h usability... yes checking sys/timeb.h presence... yes checking for sys/timeb.h... yes checking for mkdir... yes checking for getrlimit... yes checking for setrlimit... yes configure: WARNING: aMuled cannot be used with wxWidgets-2.4: disabling it checking whether taskbar icon support should be compiled... yes checking whether taskbar icon should use UTF-8 strings... yes checking if the applications should be statically linked... yes checking if this is a FreeBSD 4 or earlier system... no checking for a readline compatible library... no checking whether ccache support should be added... no configure: creating ./config.status config.status: creating Makefile config.status: creating docs/Makefile config.status: creating docs/man/Makefile config.status: creating intl/Makefile config.status: creating m4/Makefile config.status: creating src/Makefile config.status: creating src/kademlia/Makefile config.status: creating src/kademlia/utils/Makefile config.status: creating src/kademlia/io/Makefile config.status: creating src/kademlia/kademlia/Makefile config.status: creating src/kademlia/routing/Makefile config.status: creating src/kademlia/net/Makefile config.status: creating src/pixmaps/Makefile config.status: creating src/utils/Makefile config.status: creating src/utils/aLinkCreator/Makefile config.status: creating src/utils/aLinkCreator/docs/Makefile config.status: creating src/utils/aLinkCreator/src/Makefile config.status: creating src/utils/cas/Makefile config.status: creating src/utils/cas/docs/Makefile config.status: creating src/utils/wxCas/Makefile config.status: creating src/utils/wxCas/docs/Makefile config.status: creating src/utils/wxCas/src/Makefile config.status: creating src/utils/xas/Makefile config.status: creating src/utils/xas/docs/Makefile config.status: creating src/webserver/Makefile config.status: creating src/webserver/default/Makefile config.status: creating src/webserver/chicane/Makefile config.status: creating po/Makefile.in config.status: creating Compilation.flags config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile Configure script has finished system check. Configured aMule 2.0.3 for 'i686-pc-linux'. aMule enabled options: **** aMule Core **** Prefix where aMule should be installed? /usr/local Should aMule be compiled with i18n support? yes Should aMule be compiled in debug mode? yes Should aMule be compiled with profiling? no Should aMule be compiled with optimizations? no Should aMule be compiled with taskbar icon support? yes Should aMule be compiled with old GTK taskbar icon? yes Should aMule be compiled with UTF-8 taskbar icon support? yes Should aMule be linked against patched gsocket? yes Should aMule monolithic application be built? yes Should aMule daemon version be built? no Should aMule remote gui be built? (EXPERIMENTAL) yes Crypto++ library/headers style? embedded **** aMule TextClient **** Should aMule Command Line Client be built? no Should aMule GUI Client be built? yes **** aMule WebServer **** Should aMule WebServer be built? no Should aMule WebServer GUI be built? yes **** aMule ED2K Links Handler **** Should aMule ED2K Links Handler be built? yes **** aMuleLinkCreator **** Should aMuleLinkCreator GUI version (alc) be built? yes Should aMuleLinkCreator for console (alcc) be built? no **** aMule Statistics **** Should C aMule Statistics (CAS) be built? no Should aMule GUI Statistics (wxCas) be built? no **** General Libraries and Tools **** Should ccache support be enabled? no Libraries aMule will use to build: wxWidgets 2.4.2 GTK 1.2.10 crypto++ embedded libpng 1.2.8 zlib 1.2.3 NOTICE: You need wxWidgets 2.5 or later to compile: amuled NOTICE: With wxWidgets versions prior to 2.5, you need wxBase library to compile: amuleweb amulecmd alcc WARNING! gd-lib >= 2.0.0, or a functional gd.h (from gd-devel) not found. amuleweb will be compiled but file download progress bar images will NOT be generated. See the above error on gd check for solutions. [-- Attachment #3: amule.make-out.txt --] [-- Type: text/plain, Size: 4890 bytes --] make all-recursive make[1]: Entering directory `/home/olvin/work/amule/aMule-2.0.3' Making all in m4 make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/m4' make[2]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ. make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/m4' Making all in docs make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs' Making all in man make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs/man' make[3]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ. make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs/man' make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs' make[3]: ãÅÌØ `all-am' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ. make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs' make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs' Making all in src make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src' Making all in utils make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils' Making all in xas make[4]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas' Making all in docs make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas/docs' make[5]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ. make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas/docs' make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas' make[5]: ãÅÌØ `all-am' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ. make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas' make[4]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas' Making all in aLinkCreator make[4]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator' Making all in src make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src' if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alc.o -MD -MP -MF ".deps/alc-alc.Tpo" -c -o alc-alc.o `test -f 'alc.cpp' || echo './'`alc.cpp; \ then mv -f ".deps/alc-alc.Tpo" ".deps/alc-alc.Po"; else rm -f ".deps/alc-alc.Tpo"; exit 1; fi if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alcframe.o -MD -MP -MF ".deps/alc-alcframe.Tpo" -c -o alc-alcframe.o `test -f 'alcframe.cpp' || echo './'`alcframe.cpp; \ then mv -f ".deps/alc-alcframe.Tpo" ".deps/alc-alcframe.Po"; else rm -f ".deps/alc-alcframe.Tpo"; exit 1; fi if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-ed2khash.o -MD -MP -MF ".deps/alc-ed2khash.Tpo" -c -o alc-ed2khash.o `test -f 'ed2khash.cpp' || echo './'`ed2khash.cpp; \ then mv -f ".deps/alc-ed2khash.Tpo" ".deps/alc-ed2khash.Po"; else rm -f ".deps/alc-ed2khash.Tpo"; exit 1; fi if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alcpix.o -MD -MP -MF ".deps/alc-alcpix.Tpo" -c -o alc-alcpix.o `test -f 'alcpix.cpp' || echo './'`alcpix.cpp; \ then mv -f ".deps/alc-alcpix.Tpo" ".deps/alc-alcpix.Po"; else rm -f ".deps/alc-alcpix.Tpo"; exit 1; fi if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-md4.o -MD -MP -MF ".deps/alc-md4.Tpo" -c -o alc-md4.o `test -f 'md4.cpp' || echo './'`md4.cpp; \ then mv -f ".deps/alc-md4.Tpo" ".deps/alc-md4.Po"; else rm -f ".deps/alc-md4.Tpo"; exit 1; fi g++ -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -static -lpthread -o alc alc-alc.o alc-alcframe.o alc-ed2khash.o alc-alcpix.o alc-md4.o -pthread /usr/lib/libwx_gtk-2.4.a -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lgthread -lglib -lpthread -ldl -lXi -lXext -lX11 -lm -lpng -ljpeg -ltiff -lz -ldl -lm make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src' make[4]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator' make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils' make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src' make[1]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3' ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 6:58 ` Olvin @ 2005-10-19 7:30 ` Alex Gorbachenko 2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov 1 sibling, 0 replies; 23+ messages in thread From: Alex Gorbachenko @ 2005-10-19 7:30 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 194 bytes --] On Wed, 19 Oct 2005 09:58:24 +0300 Olvin wrote: O>Так вот. Что делать? Чего ему не хватает? В каком пакете этот *.a O>брать? ни в каком. он не нужен. -- np: Nightwish - The Siren [-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] огромные письма - нафиг 2005-10-19 6:58 ` Olvin 2005-10-19 7:30 ` Alex Gorbachenko @ 2005-10-19 7:34 ` Mike Lykov 2005-10-19 14:32 ` Andrey Rahmatullin 1 sibling, 1 reply; 23+ messages in thread From: Mike Lykov @ 2005-10-19 7:34 UTC (permalink / raw) To: ALT Linux Community В сообщении от Среда 19 Октябрь 2005 11:58 Olvin написал: > Итак, разбор полётов. 25 килобайт? уважайте подписчиков конференции и сервер! для вас придумали pastebin.com и другие подобные. -- Mike Lykov Samara, "Vesna" parfum company, System administrator ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] огромные письма - нафиг 2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov @ 2005-10-19 14:32 ` Andrey Rahmatullin 0 siblings, 0 replies; 23+ messages in thread From: Andrey Rahmatullin @ 2005-10-19 14:32 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 388 bytes --] On Wed, Oct 19, 2005 at 12:34:23PM +0500, Mike Lykov wrote: > 25 килобайт? уважайте подписчиков конференции и сервер! > для вас придумали pastebin.com и другие подобные. Да хотя бы bzip2. -- WBR, wRAR (ALT Linux Team) Powered by the ALT Linux fortune(8): Пока мне не объяснят, как сделать так, чтобы воспроизвести это, я буду считать, что всё нормально. -- ldv in devel@ [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin ` (2 preceding siblings ...) 2005-10-19 6:58 ` Olvin @ 2005-10-19 8:03 ` Olvin 2005-10-19 8:42 ` Olvin 3 siblings, 1 reply; 23+ messages in thread From: Olvin @ 2005-10-19 8:03 UTC (permalink / raw) To: ALT Linux Community Olvin wrote: > Выкачал aMule и lmule. Попробовал собрать lmule из тамошних src.rpm - > ошибка. Нет gdkconfig.h. Кроме того, в /usr/include пришлось симлинки > делать на некоторые каталоги (и подкаталоги с файлами!). Но этот > gdkconfig.h я уже не знаю, где искать. Может, подскажете, в каком пакете? > Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов > есть версии? ;) Итак, теперь про lmule. $ gcc --version 2.96 $ Качаю http://heanet.dl.sourceforge.net/sourceforge/lmule/lmule-1.2.1-1.src.rpm Далее, rpm -i lmule-1.2.1-1.src.rpm cd ~/RPM rpm -bb SPECS/lmule.spec 2>&1|tee ~/rpm-bb-lmule.out.txt По просьбам трудящихся, лог выложил здесь :) http://olvin.h1.ru/rpm-bb-lmule.out.txt.bz2 159КБ. В распакованном виде - ~3.5МБ :) Его вообще можно под ALM2.4 собрать? Или не судьба? Что ещё надо поставить для его сборки? ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule 2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin @ 2005-10-19 8:42 ` Olvin 0 siblings, 0 replies; 23+ messages in thread From: Olvin @ 2005-10-19 8:42 UTC (permalink / raw) To: ALT Linux Community Olvin wrote: > По просьбам трудящихся, лог выложил здесь :) > http://olvin.h1.ru/rpm-bb-lmule.out.txt.bz2 > 159КБ. В распакованном виде - ~3.5МБ :) Забыл сказать: качать браузером. Сначала попадёте на страницу ошибки agava, там будет ссылка для скачивания ("Сохранить объект как...") ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2005-10-19 14:32 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin 2005-10-18 18:04 ` Владимир Гусев 2005-10-18 18:13 ` Re[2]: " Denis Yatsutko 2005-10-18 18:25 ` Alexander Kubatkin 2005-10-18 18:38 ` Владимир Гусев 2005-10-19 7:22 ` Dmitry Kovalev 2005-10-19 7:09 ` Olvin 2005-10-19 8:03 ` Владимир Гусев 2005-10-19 8:10 ` [Comm] [JT] " Olvin 2005-10-19 8:09 ` [Comm] " Alexey Morsov 2005-10-19 8:07 ` Olvin 2005-10-19 8:23 ` Alexey Morsov 2005-10-19 9:07 ` Olvin 2005-10-19 9:10 ` Re[2]: " Denis Yatsutko 2005-10-19 9:22 ` Olvin 2005-10-19 6:12 ` Alex Gorbachenko 2005-10-19 6:46 ` Olvin 2005-10-19 6:58 ` Olvin 2005-10-19 7:30 ` Alex Gorbachenko 2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov 2005-10-19 14:32 ` Andrey Rahmatullin 2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin 2005-10-19 8:42 ` Olvin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git