* [Comm] p2p клиент наподобие xMule
@ 2005-10-18 17:38 Olvin
2005-10-18 18:04 ` Владимир Гусев
` (3 more replies)
0 siblings, 4 replies; 23+ messages in thread
From: Olvin @ 2005-10-18 17:38 UTC (permalink / raw)
To: community
xMule больше не могу пользоваться. Сегодня вообще не смог
законнектиться. Почти на всех серверах говорит, что, мол, версия моего
клиента слишком старая. А сегодня вообще начало выдавать (иногда)
какую-то фатальную ошибку. Посмотреть не могу - только завтра на работе.
На mldonkey тоже ругается.
Выкачал aMule и lmule. Попробовал собрать lmule из тамошних src.rpm -
ошибка. Нет gdkconfig.h. Кроме того, в /usr/include пришлось симлинки
делать на некоторые каталоги (и подкаталоги с файлами!). Но этот
gdkconfig.h я уже не знаю, где искать. Может, подскажете, в каком пакете?
С aMule из тарбола - похожая ситуация. Там даже спек был, но он для SuSe
и у меня не пошёл. Пришлось руками. Но не вышло.
Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов
есть версии? ;)
Или у кого есть собраный (aMule или lmule)?
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin
@ 2005-10-18 18:04 ` Владимир Гусев
2005-10-18 18:13 ` Re[2]: " Denis Yatsutko
` (2 more replies)
2005-10-19 6:12 ` Alex Gorbachenko
` (2 subsequent siblings)
3 siblings, 3 replies; 23+ messages in thread
From: Владимир Гусев @ 2005-10-18 18:04 UTC (permalink / raw)
To: ALT Linux Community
> xMule больше не могу пользоваться. Сегодня вообще не смог
> законнектиться. Почти на всех серверах говорит, что, мол, версия моего
> клиента слишком старая. А сегодня вообще начало выдавать (иногда)
> какую-то фатальную ошибку. Посмотреть не могу - только завтра на работе.
Странно.. Уже больше года пользуюсь - проблем не было ни разу.. нынешняя
версия xMule из Мастера 2.4 - 1.8.4
Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re[2]: [Comm] p2p клиент наподобие xMule
2005-10-18 18:04 ` Владимир Гусев
@ 2005-10-18 18:13 ` Denis Yatsutko
2005-10-18 18:25 ` Alexander Kubatkin
2005-10-19 7:09 ` Olvin
2005-10-19 9:07 ` Olvin
2 siblings, 1 reply; 23+ messages in thread
From: Denis Yatsutko @ 2005-10-18 18:13 UTC (permalink / raw)
To: ALT Linux Community
> Странно.. Уже больше года пользуюсь - проблем не было ни разу.. нынешняя
> версия xMule из Мастера 2.4 - 1.8.4
> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
Та же фигня.
Пробовал ещё KMLdonkey, но xMule показался значительно удобнее.
---
http://denisbooks.lenin.ru
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 18:13 ` Re[2]: " Denis Yatsutko
@ 2005-10-18 18:25 ` Alexander Kubatkin
2005-10-18 18:38 ` Владимир Гусев
2005-10-19 7:22 ` Dmitry Kovalev
0 siblings, 2 replies; 23+ messages in thread
From: Alexander Kubatkin @ 2005-10-18 18:25 UTC (permalink / raw)
To: Denis Yatsutko, ALT Linux Community
On Tuesday 18 October 2005 22:13, Denis Yatsutko wrote:
> > Странно.. Уже больше года пользуюсь - проблем не было ни разу..
> > нынешняя версия xMule из Мастера 2.4 - 1.8.4
> > Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
>
> Та же фигня.
> Пробовал ещё KMLdonkey, но xMule показался значительно удобнее.
разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему? куда
лучше иметь в системе демона, к которому можно подключиться хоть
telnet'ом, хоть через web, найти/добавить/удалить закачку и отключиться от
него, а он уже потом пришлет письмо, что мол скачал то-то и положил
туда-то... причем kmldonkey удобнее telnet'а только в плане поиска, не
более, все остальное можно и телнетом делать :) при этом kmldonkey - это
ведь всего-лишь интерфейс, т.е. ему не надо все время висеть в системе,
чтобы mldonkey работал.
--
Alexander Kubatkin
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 18:25 ` Alexander Kubatkin
@ 2005-10-18 18:38 ` Владимир Гусев
2005-10-19 7:22 ` Dmitry Kovalev
1 sibling, 0 replies; 23+ messages in thread
From: Владимир Гусев @ 2005-10-18 18:38 UTC (permalink / raw)
To: _kaa_, ALT Linux Community
>>> Странно.. Уже больше года пользуюсь - проблем не было ни разу..
>>> нынешняя версия xMule из Мастера 2.4 - 1.8.4
>>> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
>> Пробовал ещё KMLdonkey, но xMule показался значительно удобнее.
> разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему?
Может.. xMule.. :) А вообще - это сугубо индивидуально..
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin
2005-10-18 18:04 ` Владимир Гусев
@ 2005-10-19 6:12 ` Alex Gorbachenko
2005-10-19 6:46 ` Olvin
2005-10-19 6:58 ` Olvin
2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin
3 siblings, 1 reply; 23+ messages in thread
From: Alex Gorbachenko @ 2005-10-19 6:12 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 245 bytes --]
On Tue, 18 Oct 2005 20:38:13 +0300
Olvin wrote:
O>С aMule из тарбола - похожая ситуация. Там даже спек был, но он для
O>SuSe и у меня не пошёл. Пришлось руками. Но не вышло.
в сизифе лежит amule. давно уж.
--
np: Crematory - Away
[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 6:12 ` Alex Gorbachenko
@ 2005-10-19 6:46 ` Olvin
0 siblings, 0 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 6:46 UTC (permalink / raw)
To: ALT Linux Community
Alex Gorbachenko wrote:
> O>С aMule из тарбола - похожая ситуация. Там даже спек был, но он для
> O>SuSe и у меня не пошёл. Пришлось руками. Но не вышло.
> в сизифе лежит amule. давно уж.
Который не поставить без основательного обсизифливания системы. Уже
смотрел. От требует то, чего я ему могу, но не хочу давать :)
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin
2005-10-18 18:04 ` Владимир Гусев
2005-10-19 6:12 ` Alex Gorbachenko
@ 2005-10-19 6:58 ` Olvin
2005-10-19 7:30 ` Alex Gorbachenko
2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov
2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin
3 siblings, 2 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 6:58 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 1627 bytes --]
Olvin wrote:
> С aMule из тарбола - похожая ситуация. Там даже спек был, но он для SuSe
> и у меня не пошёл. Пришлось руками. Но не вышло.
> Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов
> есть версии? ;)
Итак, разбор полётов.
[olvin@enigma amule]$ pwd
/home/olvin/work/amule
[olvin@enigma amule]$ ls
aMule-2.0.3.tar.bz2
[olvin@enigma amule]$ tar -xjf aMule-2.0.3.tar.bz2
[olvin@enigma amule]$ $ cd aMule-2.0.3
[olvin@enigma aMule-2.0.3]$ ./configure --enable-static \
--enable-amule-daemon --enable-amulecmd \
--enable-amulecmdgui --enable-webserver \
--enable-webservergui --enable-amule-gui \
--enable-alc --enable-alcc --enable-utf8-systray \
--with-x --with-included-gettext |tee ~/amule.configure-out.txt
...
Вывод во вложении.
...
[olvin@enigma aMule-2.0.3]$ make |tee ~/amule.make-out.txt
...
Вывод во вложении.
...
i586-alt-linux-g++: /usr/lib/libwx_gtk-2.4.a: No such file or directory
make[5]: *** [alc] Ошибка 1
make[5]: Leaving directory
`/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src'
make[4]: *** [all-recursive] Ошибка 1
make[3]: *** [all-recursive] Ошибка 1
make[2]: *** [all-recursive] Ошибка 1
make[1]: *** [all-recursive] Ошибка 1
make: *** [all] Ошибка 2
make[4]: Leaving directory
`/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator'
make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils'
make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src'
make[1]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3'
[olvin@enigma aMule-2.0.3]$
Так вот. Что делать? Чего ему не хватает? В каком пакете этот *.a брать?
[-- Attachment #2: amule.configure-out.txt --]
[-- Type: text/plain, Size: 15684 bytes --]
checking build system type... i686-pc-linux
checking host system type... i686-pc-linux
checking target system type... i686-pc-linux
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether make sets $(MAKE)... (cached) yes
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for ranlib... ranlib
checking for bison... bison -y
checking whether ln -s works... yes
checking for ranlib... (cached) ranlib
checking for strip... strip
checking for ar... ar
checking for ld... ld
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for zlib >= 1.1.4... yes (version 1.2.3)
checking for libpng-config... /usr/bin/libpng-config
checking for libpng version >= 1.2.0... yes (version 1.2.8)
checking gd.h usability... no
checking gd.h presence... no
checking for gd.h... no
configure:
WARNING: libpng-devel >= 1.2.0 is needed for amuleweb
checking whether we need the GUI... yes
checking for wx-config... /usr/bin/wx-config
checking for wxWidgets version >= 2.4.2... yes (version 2.4.2)
checking for wxbase-2.4-config... no
checking for GUI toolkit to use... GTK
checking if wxWidgets was linked with GTK2... no
checking for gtk-config... /usr/bin/gtk-config
checking for GTK - version >= 1.2.0... yes
checking whether to use embedded Crypto... yes
checking for bfd headers... no
configure: WARNING: bfd.h not found, please install binutils development package if you are a developer or want to help testing aMule
checking for autopoint... yes (4.1)
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for working alloca.h... yes
checking for alloca... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking argz.h usability... yes
checking argz.h presence... yes
checking for argz.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for inttypes.h... (cached) yes
checking langinfo.h usability... yes
checking langinfo.h presence... yes
checking for langinfo.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking stdio_ext.h usability... yes
checking stdio_ext.h presence... yes
checking for stdio_ext.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/mount.h usability... yes
checking sys/mount.h presence... yes
checking for sys/mount.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for mode_t... yes
checking for off_t... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for uid_t in sys/types.h... yes
checking for working volatile... yes
checking for ptrdiff_t... yes
checking whether closedir returns void... no
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for library containing strerror... none required
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking whether integer division by zero raises SIGFPE... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unsigned long long... yes
checking for inttypes.h... yes
checking whether the inttypes.h PRIxNN macros are broken... no
checking for ld used by GCC... ld
checking if the linker (ld) is GNU ld... yes
checking for shared library run path origin... done
checking for argz.h... (cached) yes
checking for limits.h... (cached) yes
checking for locale.h... (cached) yes
checking nl_types.h usability... yes
checking nl_types.h presence... yes
checking for nl_types.h... yes
checking for malloc.h... (cached) yes
checking for stddef.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for feof_unlocked... yes
checking for fgets_unlocked... yes
checking for getc_unlocked... yes
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... yes
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for stpcpy... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for __argz_count... yes
checking for __argz_stringify... yes
checking for __argz_next... yes
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking for bison... bison
checking version of bison... 1.875, ok
checking whether NLS is requested... yes
checking whether included gettext is requested... yes
checking for getmntent in -lsun... no
checking for getmntent in -lseq... no
checking for getmntent in -lgen... no
checking for getmntent... yes
checking whether gcc needs -traditional... no
checking for pid_t... yes
checking for unistd.h... (cached) yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking whether lstat dereferences a symlink specified with a trailing slash... yes
checking whether lstat accepts an empty string... no
checking whether lstat dereferences a symlink specified with a trailing slash... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking for function prototypes... yes
checking whether setvbuf arguments are reversed... no
checking return type of signal handlers... void
checking whether stat accepts an empty string... no
checking for strftime... yes
checking for working strtod... yes
checking for __argz_count... (cached) yes
checking for __argz_next... (cached) yes
checking for __argz_stringify... (cached) yes
checking for endpwent... yes
checking for floor... no
checking for ftruncate... yes
checking for getcwd... (cached) yes
checking for gethostbyaddr... yes
checking for gethostbyname... yes
checking for gethostname... yes
checking for getmntent... (cached) yes
checking for getmntinfo... no
checking for getpass... yes
checking for gettimeofday... yes
checking for inet_ntoa... yes
checking for memmove... yes
checking for mempcpy... (cached) yes
checking for memset... yes
checking for munmap... (cached) yes
checking for nl_langinfo... yes
checking for select... yes
checking for setlocale... (cached) yes
checking for socket... yes
checking for sqrt... no
checking for stpcpy... (cached) yes
checking for strcasecmp... (cached) yes
checking for strchr... yes
checking for strcspn... yes
checking for strdup... (cached) yes
checking for strerror... yes
checking for strncasecmp... yes
checking for strstr... yes
checking for strtoul... (cached) yes
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking sys/timeb.h usability... yes
checking sys/timeb.h presence... yes
checking for sys/timeb.h... yes
checking for mkdir... yes
checking for getrlimit... yes
checking for setrlimit... yes
configure: WARNING: aMuled cannot be used with wxWidgets-2.4: disabling it
checking whether taskbar icon support should be compiled... yes
checking whether taskbar icon should use UTF-8 strings... yes
checking if the applications should be statically linked... yes
checking if this is a FreeBSD 4 or earlier system... no
checking for a readline compatible library... no
checking whether ccache support should be added... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/man/Makefile
config.status: creating intl/Makefile
config.status: creating m4/Makefile
config.status: creating src/Makefile
config.status: creating src/kademlia/Makefile
config.status: creating src/kademlia/utils/Makefile
config.status: creating src/kademlia/io/Makefile
config.status: creating src/kademlia/kademlia/Makefile
config.status: creating src/kademlia/routing/Makefile
config.status: creating src/kademlia/net/Makefile
config.status: creating src/pixmaps/Makefile
config.status: creating src/utils/Makefile
config.status: creating src/utils/aLinkCreator/Makefile
config.status: creating src/utils/aLinkCreator/docs/Makefile
config.status: creating src/utils/aLinkCreator/src/Makefile
config.status: creating src/utils/cas/Makefile
config.status: creating src/utils/cas/docs/Makefile
config.status: creating src/utils/wxCas/Makefile
config.status: creating src/utils/wxCas/docs/Makefile
config.status: creating src/utils/wxCas/src/Makefile
config.status: creating src/utils/xas/Makefile
config.status: creating src/utils/xas/docs/Makefile
config.status: creating src/webserver/Makefile
config.status: creating src/webserver/default/Makefile
config.status: creating src/webserver/chicane/Makefile
config.status: creating po/Makefile.in
config.status: creating Compilation.flags
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configure script has finished system check.
Configured aMule 2.0.3 for 'i686-pc-linux'.
aMule enabled options:
**** aMule Core ****
Prefix where aMule should be installed? /usr/local
Should aMule be compiled with i18n support? yes
Should aMule be compiled in debug mode? yes
Should aMule be compiled with profiling? no
Should aMule be compiled with optimizations? no
Should aMule be compiled with taskbar icon support? yes
Should aMule be compiled with old GTK taskbar icon? yes
Should aMule be compiled with UTF-8 taskbar icon support? yes
Should aMule be linked against patched gsocket? yes
Should aMule monolithic application be built? yes
Should aMule daemon version be built? no
Should aMule remote gui be built? (EXPERIMENTAL) yes
Crypto++ library/headers style? embedded
**** aMule TextClient ****
Should aMule Command Line Client be built? no
Should aMule GUI Client be built? yes
**** aMule WebServer ****
Should aMule WebServer be built? no
Should aMule WebServer GUI be built? yes
**** aMule ED2K Links Handler ****
Should aMule ED2K Links Handler be built? yes
**** aMuleLinkCreator ****
Should aMuleLinkCreator GUI version (alc) be built? yes
Should aMuleLinkCreator for console (alcc) be built? no
**** aMule Statistics ****
Should C aMule Statistics (CAS) be built? no
Should aMule GUI Statistics (wxCas) be built? no
**** General Libraries and Tools ****
Should ccache support be enabled? no
Libraries aMule will use to build:
wxWidgets 2.4.2
GTK 1.2.10
crypto++ embedded
libpng 1.2.8
zlib 1.2.3
NOTICE: You need wxWidgets 2.5 or later to compile:
amuled
NOTICE: With wxWidgets versions prior to 2.5, you need wxBase library to compile:
amuleweb amulecmd alcc
WARNING! gd-lib >= 2.0.0, or a functional gd.h (from gd-devel) not found.
amuleweb will be compiled but file download progress bar images will NOT be generated.
See the above error on gd check for solutions.
[-- Attachment #3: amule.make-out.txt --]
[-- Type: text/plain, Size: 4890 bytes --]
make all-recursive
make[1]: Entering directory `/home/olvin/work/amule/aMule-2.0.3'
Making all in m4
make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/m4'
make[2]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/m4'
Making all in docs
make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs'
Making all in man
make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs/man'
make[3]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs/man'
make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/docs'
make[3]: ãÅÌØ `all-am' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs'
make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/docs'
Making all in src
make[2]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src'
Making all in utils
make[3]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils'
Making all in xas
make[4]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas'
Making all in docs
make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas/docs'
make[5]: ãÅÌØ `all' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas/docs'
make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas'
make[5]: ãÅÌØ `all-am' ÎÅ ÔÒÅÂÕÅÔ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄ.
make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas'
make[4]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/xas'
Making all in aLinkCreator
make[4]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator'
Making all in src
make[5]: Entering directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alc.o -MD -MP -MF ".deps/alc-alc.Tpo" -c -o alc-alc.o `test -f 'alc.cpp' || echo './'`alc.cpp; \
then mv -f ".deps/alc-alc.Tpo" ".deps/alc-alc.Po"; else rm -f ".deps/alc-alc.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alcframe.o -MD -MP -MF ".deps/alc-alcframe.Tpo" -c -o alc-alcframe.o `test -f 'alcframe.cpp' || echo './'`alcframe.cpp; \
then mv -f ".deps/alc-alcframe.Tpo" ".deps/alc-alcframe.Po"; else rm -f ".deps/alc-alcframe.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-ed2khash.o -MD -MP -MF ".deps/alc-ed2khash.Tpo" -c -o alc-ed2khash.o `test -f 'ed2khash.cpp' || echo './'`ed2khash.cpp; \
then mv -f ".deps/alc-ed2khash.Tpo" ".deps/alc-ed2khash.Po"; else rm -f ".deps/alc-ed2khash.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-alcpix.o -MD -MP -MF ".deps/alc-alcpix.Tpo" -c -o alc-alcpix.o `test -f 'alcpix.cpp' || echo './'`alcpix.cpp; \
then mv -f ".deps/alc-alcpix.Tpo" ".deps/alc-alcpix.Po"; else rm -f ".deps/alc-alcpix.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. -I/usr/lib/wx/include/gtk-2.4 -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -MT alc-md4.o -MD -MP -MF ".deps/alc-md4.Tpo" -c -o alc-md4.o `test -f 'md4.cpp' || echo './'`md4.cpp; \
then mv -f ".deps/alc-md4.Tpo" ".deps/alc-md4.Po"; else rm -f ".deps/alc-md4.Tpo"; exit 1; fi
g++ -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -static -lpthread -o alc alc-alc.o alc-alcframe.o alc-ed2khash.o alc-alcpix.o alc-md4.o -pthread /usr/lib/libwx_gtk-2.4.a -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lgthread -lglib -lpthread -ldl -lXi -lXext -lX11 -lm -lpng -ljpeg -ltiff -lz -ldl -lm
make[5]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator/src'
make[4]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils/aLinkCreator'
make[3]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src/utils'
make[2]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3/src'
make[1]: Leaving directory `/home/olvin/work/amule/aMule-2.0.3'
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 18:04 ` Владимир Гусев
2005-10-18 18:13 ` Re[2]: " Denis Yatsutko
@ 2005-10-19 7:09 ` Olvin
2005-10-19 8:03 ` Владимир Гусев
2005-10-19 8:09 ` [Comm] " Alexey Morsov
2005-10-19 9:07 ` Olvin
2 siblings, 2 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 7:09 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 1248 bytes --]
Владимир Гусев wrote:
>> xMule больше не могу пользоваться. Сегодня вообще не смог
>> законнектиться. Почти на всех серверах говорит, что, мол, версия
>> моего клиента слишком старая. А сегодня вообще начало выдавать
>> (иногда) какую-то фатальную ошибку. Посмотреть не могу - только
>> завтра на работе.
> Странно.. Уже больше года пользуюсь - проблем не было ни разу..
> нынешняя версия xMule из Мастера 2.4 - 1.8.4
> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
У меня до поры-до времени тоже был порядок. Сначала я попробовал
mldonkey. Не пошло с теми же сообщениями об устаревшей версии (т.е. оно
не валилось, но с сетью не контачило). Выкачал и скомпилировал с оф.
сайта. Заработало. Потом решил попробовать xmule. Всё ОК (только многие
отлуп давали по той же причине). А вчера вообще не получилось
подключиться. На работе LowID. Дома HiID и вроде бы работает сносно,
хотя ругань продолжается.
короче, запускаю xmule. Жму Update (обновить список серверов). Далее,
жму Connect.
Лог во вложении.
Кстати, про какую ещё опцию он постоянно говорит?
2005-10-19 10:03:18: Warning: Do not change these setting unless you
know what you are doing. Otherwise you can easily make things worse for
yourself.
[-- Attachment #2: xmule-log.txt --]
[-- Type: text/plain, Size: 14809 bytes --]
2005-10-19 09:58:56: Loaded ipfilter with 0 IP addresses.
2005-10-19 09:58:56: 16 servers in server.met found
2005-10-19 09:58:56: No part files found
2005-10-19 09:58:56: Found 35 part files
2005-10-19 09:58:56: xMule 1.8.4
2005-10-19 09:59:00: Found 1591 known shared files
2005-10-19 09:59:09: 0 servers added, 11 not added (already listed/invalid)
2005-10-19 10:03:04: Connecting
2005-10-19 10:03:04: Disconnected
2005-10-19 10:03:04: Connecting to Razorback 2.0 (195.245.244.243:4661)...
2005-10-19 10:03:04: Connected to Razorback 2.0 (195.245.244.243:4661), sending login request
2005-10-19 10:03:04: Connecting to DonkeyServer No1 (62.241.53.2:4242)...
2005-10-19 10:03:05: Connected to DonkeyServer No1 (62.241.53.2:4242), sending login request
2005-10-19 10:03:18: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. Razorback 2.0 (195.245.244.243:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:03:18: Lost connection to Razorback 2.0 (195.245.244.243:4661)
2005-10-19 10:03:20: ïÛÉÂËÁ DonkeyServer No1 (62.241.53.2:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:03:20: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. DonkeyServer No1 (62.241.53.2:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:03:20: Lost connection to DonkeyServer No1 (62.241.53.2:4242)
2005-10-19 10:03:29: Connection attempt to Razorback 2.0 (195.245.244.243:4661 ) timed out
2005-10-19 10:03:29: Connecting to BiG BanG 9 (80.239.200.108:3000)...
2005-10-19 10:03:29: Connection attempt to DonkeyServer No1 (62.241.53.2:4242 ) timed out
2005-10-19 10:03:29: Connecting to DonkeyServer No2 (62.241.53.16:4242)...
2005-10-19 10:03:30: Connected to BiG BanG 9 (80.239.200.108:3000), sending login request
2005-10-19 10:03:30: Connected to DonkeyServer No2 (62.241.53.16:4242), sending login request
2005-10-19 10:03:45: ïÛÉÂËÁ DonkeyServer No2 (62.241.53.16:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:03:45: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. DonkeyServer No2 (62.241.53.16:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:03:45: Lost connection to DonkeyServer No2 (62.241.53.16:4242)
2005-10-19 10:03:45: ïÛÉÂËÁ BiG BanG 9 (80.239.200.108:3000) - : Your edonkey client is too old, please update it
2005-10-19 10:03:45: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. BiG BanG 9 (80.239.200.108:3000) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:03:45: Lost connection to BiG BanG 9 (80.239.200.108:3000)
2005-10-19 10:03:55: Connection attempt to BiG BanG 9 (80.239.200.108:3000 ) timed out
2005-10-19 10:03:55: Connecting to DonkeyServer No5 (62.241.53.4:4242)...
2005-10-19 10:03:55: Connection attempt to DonkeyServer No2 (62.241.53.16:4242 ) timed out
2005-10-19 10:03:55: Connecting to ChezToff (Serveur Fr) (213.186.60.106:4661)...
2005-10-19 10:03:56: Connected to ChezToff (Serveur Fr) (213.186.60.106:4661), sending login request
2005-10-19 10:03:56: Connected to DonkeyServer No5 (62.241.53.4:4242), sending login request
2005-10-19 10:04:10: ïÛÉÂËÁ ChezToff (Serveur Fr) (213.186.60.106:4661) - : Your edonkey client is too old, please update it
2005-10-19 10:04:10: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. ChezToff (Serveur Fr) (213.186.60.106:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:04:10: Lost connection to ChezToff (Serveur Fr) (213.186.60.106:4661)
2005-10-19 10:04:11: ïÛÉÂËÁ DonkeyServer No5 (62.241.53.4:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:04:11: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. DonkeyServer No5 (62.241.53.4:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:04:11: Lost connection to DonkeyServer No5 (62.241.53.4:4242)
2005-10-19 10:04:21: Connection attempt to DonkeyServer No5 (62.241.53.4:4242 ) timed out
2005-10-19 10:04:21: Connecting to !-= www.FreeOxxx.com =-! (83.149.117.56:4321)...
2005-10-19 10:04:21: Connection attempt to ChezToff (Serveur Fr) (213.186.60.106:4661 ) timed out
2005-10-19 10:04:21: Connecting to BiG BanG 11 (80.239.200.110:3000)...
2005-10-19 10:04:21: Connected to BiG BanG 11 (80.239.200.110:3000), sending login request
2005-10-19 10:04:21: Connected to !-= www.FreeOxxx.com =-! (83.149.117.56:4321), sending login request
2005-10-19 10:04:34: ïÛÉÂËÁ BiG BanG 11 (80.239.200.110:3000) - : Your edonkey client is too old, please update it
2005-10-19 10:04:35: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. BiG BanG 11 (80.239.200.110:3000) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:04:35: Lost connection to BiG BanG 11 (80.239.200.110:3000)
2005-10-19 10:04:35: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. !-= www.FreeOxxx.com =-! (83.149.117.56:4321) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:04:35: Lost connection to !-= www.FreeOxxx.com =-! (83.149.117.56:4321)
2005-10-19 10:04:46: Connection attempt to !-= www.FreeOxxx.com =-! (83.149.117.56:4321 ) timed out
2005-10-19 10:04:46: Connecting to <<< Saugcenter >>> (80.190.233.144:6565)...
2005-10-19 10:04:46: Connection attempt to BiG BanG 11 (80.239.200.110:3000 ) timed out
2005-10-19 10:04:46: Connecting to DonkeyServer No3 (62.241.53.17:4242)...
2005-10-19 10:04:46: Connected to DonkeyServer No3 (62.241.53.17:4242), sending login request
2005-10-19 10:04:46: Connected to <<< Saugcenter >>> (80.190.233.144:6565), sending login request
2005-10-19 10:05:02: ïÛÉÂËÁ <<< Saugcenter >>> (80.190.233.144:6565) - : Your edonkey client is too old, please update it
2005-10-19 10:05:02: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. <<< Saugcenter >>> (80.190.233.144:6565) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:02: Lost connection to <<< Saugcenter >>> (80.190.233.144:6565)
2005-10-19 10:05:02: ïÛÉÂËÁ DonkeyServer No3 (62.241.53.17:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:05:02: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. DonkeyServer No3 (62.241.53.17:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:02: Lost connection to DonkeyServer No3 (62.241.53.17:4242)
2005-10-19 10:05:12: Connection attempt to <<< Saugcenter >>> (80.190.233.144:6565 ) timed out
2005-10-19 10:05:12: Connecting to Razorback 2.1 (195.245.244.244:3000)...
2005-10-19 10:05:12: Connection attempt to DonkeyServer No3 (62.241.53.17:4242 ) timed out
2005-10-19 10:05:12: Connecting to BiG BanG 6 (80.239.200.105:3000)...
2005-10-19 10:05:12: Connected to BiG BanG 6 (80.239.200.105:3000), sending login request
2005-10-19 10:05:13: Connected to Razorback 2.1 (195.245.244.244:3000), sending login request
2005-10-19 10:05:27: ïÛÉÂËÁ BiG BanG 6 (80.239.200.105:3000) - : Your edonkey client is too old, please update it
2005-10-19 10:05:27: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. BiG BanG 6 (80.239.200.105:3000) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:27: Lost connection to BiG BanG 6 (80.239.200.105:3000)
2005-10-19 10:05:29: ïÛÉÂËÁ Razorback 2.1 (195.245.244.244:3000) - : Your edonkey client is too old, please update it
2005-10-19 10:05:29: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. Razorback 2.1 (195.245.244.244:3000) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:29: Lost connection to Razorback 2.1 (195.245.244.244:3000)
2005-10-19 10:05:37: Connection attempt to Razorback 2.1 (195.245.244.244:3000 ) timed out
2005-10-19 10:05:37: Connecting to Breizh Digitalus (213.186.47.84:4661)...
2005-10-19 10:05:37: Connection attempt to BiG BanG 6 (80.239.200.105:3000 ) timed out
2005-10-19 10:05:37: Connecting to »FPRO« (213.251.161.103:4661)...
2005-10-19 10:05:37: Connected to »FPRO« (213.251.161.103:4661), sending login request
2005-10-19 10:05:37: Connected to Breizh Digitalus (213.186.47.84:4661), sending login request
2005-10-19 10:05:53: ïÛÉÂËÁ »FPRO« (213.251.161.103:4661) - : Your edonkey client is too old, please update it
2005-10-19 10:05:53: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. »FPRO« (213.251.161.103:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:53: Lost connection to »FPRO« (213.251.161.103:4661)
2005-10-19 10:05:53: ïÛÉÂËÁ Breizh Digitalus (213.186.47.84:4661) - : Your edonkey client is too old, please update it
2005-10-19 10:05:53: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. Breizh Digitalus (213.186.47.84:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:05:53: Lost connection to Breizh Digitalus (213.186.47.84:4661)
2005-10-19 10:06:02: Connection attempt to »FPRO« (213.251.161.103:4661 ) timed out
2005-10-19 10:06:02: Connecting to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242)...
2005-10-19 10:06:02: Connection attempt to Breizh Digitalus (213.186.47.84:4661 ) timed out
2005-10-19 10:06:02: Connecting to www.UseNeXT.to (212.112.243.146:4661)...
2005-10-19 10:06:03: Connected to www.UseNeXT.to (212.112.243.146:4661), sending login request
2005-10-19 10:06:04: Connected to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242), sending login request
2005-10-19 10:06:14: ïÛÉÂËÁ www.UseNeXT.to (212.112.243.146:4661) - : Your edonkey client is too old, please update it
2005-10-19 10:06:14: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. www.UseNeXT.to (212.112.243.146:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:06:14: Lost connection to www.UseNeXT.to (212.112.243.146:4661)
2005-10-19 10:06:17: ïÛÉÂËÁ *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:06:17: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:06:17: Lost connection to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242)
2005-10-19 10:06:28: Connection attempt to *-_-_- xxxxxxxx-Girls _-_... (193.138.221.214:4242 ) timed out
2005-10-19 10:06:28: Connection attempt to www.UseNeXT.to (212.112.243.146:4661 ) timed out
2005-10-19 10:06:28: Failed to connect to all servers listed. Making another pass.
2005-10-19 10:06:28: Disconnected
2005-10-19 10:06:28: Connecting to Razorback 2.0 (195.245.244.243:4661)...
2005-10-19 10:06:28: Connected to Razorback 2.0 (195.245.244.243:4661), sending login request
2005-10-19 10:06:29: Connecting to DonkeyServer No1 (62.241.53.2:4242)...
2005-10-19 10:06:29: Connected to DonkeyServer No1 (62.241.53.2:4242), sending login request
2005-10-19 10:06:42: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. Razorback 2.0 (195.245.244.243:4661) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:06:42: Lost connection to Razorback 2.0 (195.245.244.243:4661)
2005-10-19 10:06:44: ïÛÉÂËÁ DonkeyServer No1 (62.241.53.2:4242) - : Your edonkey client is too old, please update it
2005-10-19 10:06:44: Warning: Do not change these setting unless you know what you are doing. Otherwise you can easily make things worse for yourself.
xMule will run fine without adjusting any of these settings. DonkeyServer No1 (62.241.53.2:4242) - : You have a lowid. Please review your network config and/or your settings.
2005-10-19 10:06:44: Lost connection to DonkeyServer No1 (62.241.53.2:4242)
2005-10-19 10:06:53: Connection attempt to Razorback 2.0 (195.245.244.243:4661 ) timed out
2005-10-19 10:06:53: Connecting to BiG BanG 9 (80.239.200.108:3000)...
2005-10-19 10:06:53: Connected to BiG BanG 9 (80.239.200.108:3000), sending login request
2005-10-19 10:06:54: Connection attempt to DonkeyServer No1 (62.241.53.2:4242 ) timed out
2005-10-19 10:06:54: Connecting to DonkeyServer No2 (62.241.53.16:4242)...
2005-10-19 10:06:54: Fatal Error while trying to connect. Internet connection might be down
2005-10-19 10:06:54: Disconnected
2005-10-19 10:06:54: Disconnected
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 18:25 ` Alexander Kubatkin
2005-10-18 18:38 ` Владимир Гусев
@ 2005-10-19 7:22 ` Dmitry Kovalev
1 sibling, 0 replies; 23+ messages in thread
From: Dmitry Kovalev @ 2005-10-19 7:22 UTC (permalink / raw)
To: community
On Tue, 18 Oct 2005 22:25:37 +0400
Alexander Kubatkin wrote:
> On Tuesday 18 October 2005 22:13, Denis Yatsutko wrote:
> разве может быть что-то удобнее mldonkey и kmldonkey интерфейса к нему?
Да. mldonkey и веб-интерфейс ;) http://localhost:4080/ и забыл что есть
есть внешние клиенты... В остальном -- согласен полностью.
Сейчас подключен (mldonkey-2.6.4), работает. Хотя любимые сервера типа
Razorback 2 и Donkey Server No 1 не согласились меня сегодня принять, но
новая "звезда" Sonny Boy 1 (64.34.162.87:5221) -- коннект нормальный. :)
--
С уважением, Дмитрий Ковалёв.
ICQ UIN: 40912331 Jabber: mercy@jabber.ru
Gentoo Base System version 1.6.13
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 6:58 ` Olvin
@ 2005-10-19 7:30 ` Alex Gorbachenko
2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov
1 sibling, 0 replies; 23+ messages in thread
From: Alex Gorbachenko @ 2005-10-19 7:30 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 194 bytes --]
On Wed, 19 Oct 2005 09:58:24 +0300
Olvin wrote:
O>Так вот. Что делать? Чего ему не хватает? В каком пакете этот *.a
O>брать?
ни в каком. он не нужен.
--
np: Nightwish - The Siren
[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] огромные письма - нафиг
2005-10-19 6:58 ` Olvin
2005-10-19 7:30 ` Alex Gorbachenko
@ 2005-10-19 7:34 ` Mike Lykov
2005-10-19 14:32 ` Andrey Rahmatullin
1 sibling, 1 reply; 23+ messages in thread
From: Mike Lykov @ 2005-10-19 7:34 UTC (permalink / raw)
To: ALT Linux Community
В сообщении от Среда 19 Октябрь 2005 11:58 Olvin написал:
> Итак, разбор полётов.
25 килобайт? уважайте подписчиков конференции и сервер!
для вас придумали pastebin.com и другие подобные.
--
Mike Lykov
Samara, "Vesna" parfum company, System administrator
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 7:09 ` Olvin
@ 2005-10-19 8:03 ` Владимир Гусев
2005-10-19 8:10 ` [Comm] [JT] " Olvin
2005-10-19 8:09 ` [Comm] " Alexey Morsov
1 sibling, 1 reply; 23+ messages in thread
From: Владимир Гусев @ 2005-10-19 8:03 UTC (permalink / raw)
To: ALT Linux Community
>>> xMule больше не могу пользоваться. Сегодня вообще не смог
>>> законнектиться. Почти на всех серверах говорит, что, мол, версия
>>> моего клиента слишком старая. А сегодня вообще начало выдавать
>>> (иногда) какую-то фатальную ошибку.
>> Странно.. Уже больше года пользуюсь - проблем не было ни разу..
>> нынешняя версия xMule из Мастера 2.4 - 1.8.4
>> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
> У меня до поры-до времени тоже был порядок.короче, запускаю xmule. Жму
> Update (обновить список серверов). Далее,
> жму Connect.
> Лог во вложении.
Никакого "лога во вложении" нет, а есть очень длинные письма.. Лучше
сохраняйте выводы консоли в текст и gzip его.. Письмо будет в разы меньше..
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin
` (2 preceding siblings ...)
2005-10-19 6:58 ` Olvin
@ 2005-10-19 8:03 ` Olvin
2005-10-19 8:42 ` Olvin
3 siblings, 1 reply; 23+ messages in thread
From: Olvin @ 2005-10-19 8:03 UTC (permalink / raw)
To: ALT Linux Community
Olvin wrote:
> Выкачал aMule и lmule. Попробовал собрать lmule из тамошних src.rpm -
> ошибка. Нет gdkconfig.h. Кроме того, в /usr/include пришлось симлинки
> делать на некоторые каталоги (и подкаталоги с файлами!). Но этот
> gdkconfig.h я уже не знаю, где искать. Может, подскажете, в каком пакете?
> Завтра смогу прислать подробный отчёт. Но может, у здешних телепатов
> есть версии? ;)
Итак, теперь про lmule.
$ gcc --version
2.96
$
Качаю
http://heanet.dl.sourceforge.net/sourceforge/lmule/lmule-1.2.1-1.src.rpm
Далее, rpm -i lmule-1.2.1-1.src.rpm
cd ~/RPM
rpm -bb SPECS/lmule.spec 2>&1|tee ~/rpm-bb-lmule.out.txt
По просьбам трудящихся, лог выложил здесь :)
http://olvin.h1.ru/rpm-bb-lmule.out.txt.bz2
159КБ. В распакованном виде - ~3.5МБ :)
Его вообще можно под ALM2.4 собрать? Или не судьба? Что ещё надо
поставить для его сборки?
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 8:09 ` [Comm] " Alexey Morsov
@ 2005-10-19 8:07 ` Olvin
2005-10-19 8:23 ` Alexey Morsov
0 siblings, 1 reply; 23+ messages in thread
From: Olvin @ 2005-10-19 8:07 UTC (permalink / raw)
To: ALT Linux Community
Alexey Morsov wrote:
>>подключиться. На работе LowID. Дома HiID и вроде бы работает сносно,
> lowid хы - многие серваки не дают конект lowid :) Порты открыть надо
> однако :)
Во-первых, работало. Во-вторых, с другим клиентом более-менее ОК, при
прочих равных сетевых условиях. В третьих, firewall не мой :)
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 7:09 ` Olvin
2005-10-19 8:03 ` Владимир Гусев
@ 2005-10-19 8:09 ` Alexey Morsov
2005-10-19 8:07 ` Olvin
1 sibling, 1 reply; 23+ messages in thread
From: Alexey Morsov @ 2005-10-19 8:09 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 522 bytes --]
On Wed, 19 Oct 2005 10:09:51 +0300
Olvin <olvin@rambler.ru> wrote:
> подключиться. На работе LowID. Дома HiID и вроде бы работает сносно,
lowid хы - многие серваки не дают конект lowid :) Порты открыть надо
однако :)
--
С уважением,
Алексей Морсов
системный администратор ЗАО "ИК "Риком-Траст"
ICQ: 196-766-290
Jabber: samurai@www.fondmarket.ru
www.ricom.ru
www.fondmarket.ru
<aen> Voins: btw, эти видеоролики под creative common license. можно
запаковать :-) <Nikon> aen: только не в сизиф! :)
[-- Attachment #2: Type: application/pgp-signature, Size: 482 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] [JT] p2p клиент наподобие xMule
2005-10-19 8:03 ` Владимир Гусев
@ 2005-10-19 8:10 ` Olvin
0 siblings, 0 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 8:10 UTC (permalink / raw)
To: ALT Linux Community
Владимир Гусев wrote:
>> У меня до поры-до времени тоже был порядок.короче, запускаю xmule.
>> Жму Update (обновить список серверов). Далее,
>> жму Connect.
>> Лог во вложении.
> Никакого "лога во вложении" нет, а есть очень длинные письма.. Лучше
> сохраняйте выводы консоли в текст и gzip его.. Письмо будет в разы меньше..
Извиняюсь. Просто в спешке забыл это сделать. Исправлюсь.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 8:07 ` Olvin
@ 2005-10-19 8:23 ` Alexey Morsov
0 siblings, 0 replies; 23+ messages in thread
From: Alexey Morsov @ 2005-10-19 8:23 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 649 bytes --]
On Wed, 19 Oct 2005 11:07:54 +0300
Olvin <olvin@rambler.ru> wrote:
> Во-первых, работало. Во-вторых, с другим клиентом более-менее ОК, при
не канает - то как оно с lowid работает - уж лучше бы вообще не
работало :)
> прочих равных сетевых условиях. В третьих, firewall не мой :)
^^^^^^^^^^
Вот это аргумент железный :(
--
С уважением,
Алексей Морсов
системный администратор ЗАО "ИК "Риком-Траст"
ICQ: 196-766-290
Jabber: samurai@www.fondmarket.ru
www.ricom.ru
www.fondmarket.ru
<aen> DOC_: сейчас весь talk-room -- сплошная фортунка :-) Для пакета
fortunes-morons.
[-- Attachment #2: Type: application/pgp-signature, Size: 482 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin
@ 2005-10-19 8:42 ` Olvin
0 siblings, 0 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 8:42 UTC (permalink / raw)
To: ALT Linux Community
Olvin wrote:
> По просьбам трудящихся, лог выложил здесь :)
> http://olvin.h1.ru/rpm-bb-lmule.out.txt.bz2
> 159КБ. В распакованном виде - ~3.5МБ :)
Забыл сказать: качать браузером. Сначала попадёте на страницу ошибки
agava, там будет ссылка для скачивания ("Сохранить объект как...")
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-18 18:04 ` Владимир Гусев
2005-10-18 18:13 ` Re[2]: " Denis Yatsutko
2005-10-19 7:09 ` Olvin
@ 2005-10-19 9:07 ` Olvin
2005-10-19 9:10 ` Re[2]: " Denis Yatsutko
2 siblings, 1 reply; 23+ messages in thread
From: Olvin @ 2005-10-19 9:07 UTC (permalink / raw)
To: ALT Linux Community
Владимир Гусев wrote:
>> xMule больше не могу пользоваться. Сегодня вообще не смог
>> законнектиться. Почти на всех серверах говорит, что, мол, версия
>> моего клиента слишком старая. А сегодня вообще начало выдавать
>> (иногда) какую-то фатальную ошибку. Посмотреть не могу - только
>> завтра на работе.
> Странно.. Уже больше года пользуюсь - проблем не было ни разу..
> нынешняя версия xMule из Мастера 2.4 - 1.8.4
> Вот и сейчас он запущен, и сейчас же сию минуту происходит закачка..
Не поверите. Выкачал
http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm
По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем
1.8 в ALM2.4. :)
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re[2]: [Comm] p2p клиент наподобие xMule
2005-10-19 9:07 ` Olvin
@ 2005-10-19 9:10 ` Denis Yatsutko
2005-10-19 9:22 ` Olvin
0 siblings, 1 reply; 23+ messages in thread
From: Denis Yatsutko @ 2005-10-19 9:10 UTC (permalink / raw)
To: ALT Linux Community
> http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm
> По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем
> 1.8 в ALM2.4. :)
Если не секрет, чем?
---
http://denisbooks.lenin.ru
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] p2p клиент наподобие xMule
2005-10-19 9:10 ` Re[2]: " Denis Yatsutko
@ 2005-10-19 9:22 ` Olvin
0 siblings, 0 replies; 23+ messages in thread
From: Olvin @ 2005-10-19 9:22 UTC (permalink / raw)
To: Denis Yatsutko, ALT Linux Community
Denis Yatsutko wrote:
>>http://www.imoqland.com/rpms/xmule-1.4.0-1.i386.rpm
>>По ссылке с lmule.sf.net. Работает. И мне намного больше нравится, чем
>>1.8 в ALM2.4. :)
> Если не секрет, чем?
Интерфейсом. Например, поиск. Организовано почти как в KmlDonkey -
вкладками.
Кстати, как я посмотрел, он же lmule 1.2.x :)
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [Comm] огромные письма - нафиг
2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov
@ 2005-10-19 14:32 ` Andrey Rahmatullin
0 siblings, 0 replies; 23+ messages in thread
From: Andrey Rahmatullin @ 2005-10-19 14:32 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 388 bytes --]
On Wed, Oct 19, 2005 at 12:34:23PM +0500, Mike Lykov wrote:
> 25 килобайт? уважайте подписчиков конференции и сервер!
> для вас придумали pastebin.com и другие подобные.
Да хотя бы bzip2.
--
WBR, wRAR (ALT Linux Team)
Powered by the ALT Linux fortune(8):
Пока мне не объяснят, как сделать так, чтобы воспроизвести это, я буду
считать, что всё нормально.
-- ldv in devel@
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2005-10-19 14:32 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-10-18 17:38 [Comm] p2p клиент наподобие xMule Olvin
2005-10-18 18:04 ` Владимир Гусев
2005-10-18 18:13 ` Re[2]: " Denis Yatsutko
2005-10-18 18:25 ` Alexander Kubatkin
2005-10-18 18:38 ` Владимир Гусев
2005-10-19 7:22 ` Dmitry Kovalev
2005-10-19 7:09 ` Olvin
2005-10-19 8:03 ` Владимир Гусев
2005-10-19 8:10 ` [Comm] [JT] " Olvin
2005-10-19 8:09 ` [Comm] " Alexey Morsov
2005-10-19 8:07 ` Olvin
2005-10-19 8:23 ` Alexey Morsov
2005-10-19 9:07 ` Olvin
2005-10-19 9:10 ` Re[2]: " Denis Yatsutko
2005-10-19 9:22 ` Olvin
2005-10-19 6:12 ` Alex Gorbachenko
2005-10-19 6:46 ` Olvin
2005-10-19 6:58 ` Olvin
2005-10-19 7:30 ` Alex Gorbachenko
2005-10-19 7:34 ` [Comm] огромные письма - нафиг Mike Lykov
2005-10-19 14:32 ` Andrey Rahmatullin
2005-10-19 8:03 ` [Comm] p2p клиент наподобие xMule Olvin
2005-10-19 8:42 ` Olvin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git