* [Comm] Radeon 9000
@ 2003-03-28 23:21 metalking
2003-03-29 4:27 ` Compress
2003-03-30 8:16 ` Ружников Вадим
0 siblings, 2 replies; 5+ messages in thread
From: metalking @ 2003-03-28 23:21 UTC (permalink / raw)
To: community
Доброго времени суток.
Недавно поставил себе сей девайс. Всё устраивает. О 3D даже и не
думал. Но случайно на диске обнаружил драйверы ATI если не ошибаюсь
называются fglx.
Система Master 2.2 beta доведена до Master 2.2.
Поделитесь опытом как правильно это прикрутить. У родного драйвер
(сборки ATI) ИМХО драйвер отдельно и модуль нужно собирать самому. В
Master видно помогли народу и модуль собрали. Но не нашел как это
конфигурируется (в ATIшном драйвере был конфигуратор).
Спасибо всем кто откликнулся.
--
С уважением,
metalking mailto:metalking@inbox.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Radeon 9000
2003-03-28 23:21 [Comm] Radeon 9000 metalking
@ 2003-03-29 4:27 ` Compress
2003-03-29 20:00 ` Re[2]: " metalking
2003-03-30 8:16 ` Ружников Вадим
1 sibling, 1 reply; 5+ messages in thread
From: Compress @ 2003-03-29 4:27 UTC (permalink / raw)
To: metalking
Hello metalking,
Saturday, March 29, 2003, 2:21:37 AM, you wrote:
m> Доброго времени суток.
m> Недавно поставил себе сей девайс. Всё устраивает. О 3D даже и не
m> думал. Но случайно на диске обнаружил драйверы ATI если не ошибаюсь
m> называются fglx.
m> Система Master 2.2 beta доведена до Master 2.2.
m> Поделитесь опытом как правильно это прикрутить. У родного драйвер
m> (сборки ATI) ИМХО драйвер отдельно и модуль нужно собирать самому. В
m> Master видно помогли народу и модуль собрали. Но не нашел как это
m> конфигурируется (в ATIшном драйвере был конфигуратор).
m> Спасибо всем кто откликнулся.
Наконец-то собрат по несчастью.У меня на ноуте чип тот же-R250(RADEON
9000),а видюха другая-ATI MOBILITY RADEON M9.Так вот я долго возился с
дровами,и мой тебе совет-поставь Xfree 4.3.0.Будет меньше гимора.И там
твоя карта(и моя)работает сразу в 3Д с ускорением и т.д.
--
Best regards,
Compress mailto:compress2002@mail.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re[2]: [Comm] Radeon 9000
2003-03-29 4:27 ` Compress
@ 2003-03-29 20:00 ` metalking
2003-03-31 16:48 ` Re[3]: " Compress
0 siblings, 1 reply; 5+ messages in thread
From: metalking @ 2003-03-29 20:00 UTC (permalink / raw)
To: Compress
Здравствуйте, Compress.
Вы писали 29 марта 2003 г., 7:27:14:
C> Hello metalking,
C> Saturday, March 29, 2003, 2:21:37 AM, you wrote:
m>> Доброго времени суток.
m>> Недавно поставил себе сей девайс. Всё устраивает. О 3D даже и не
m>> думал. Но случайно на диске обнаружил драйверы ATI если не ошибаюсь
m>> называются fglx.
m>> Система Master 2.2 beta доведена до Master 2.2.
m>> Поделитесь опытом как правильно это прикрутить. У родного драйвер
m>> (сборки ATI) ИМХО драйвер отдельно и модуль нужно собирать самому. В
m>> Master видно помогли народу и модуль собрали. Но не нашел как это
m>> конфигурируется (в ATIшном драйвере был конфигуратор).
m>> Спасибо всем кто откликнулся.
C> Наконец-то собрат по несчастью.У меня на ноуте чип тот же-R250(RADEON
C> 9000),а видюха другая-ATI MOBILITY RADEON M9.Так вот я долго возился с
C> дровами,и мой тебе совет-поставь Xfree 4.3.0.Будет меньше гимора.И там
C> твоя карта(и моя)работает сразу в 3Д с ускорением и т.д.
Удалось запустить с дровами, что шли с мастером. Для этого
надо в конфигах вместо radeon прописать fglrx
Но только у меня проявляется другой глюк: Если запустить например
tuxracer с настройками по умолчанию то на вывод на экран неккоректен
(вместо изображения разноцветные прямоугольники).
Если сменить на настройки как у рабочего стола (у меня 1280*1024)то всё ОК.
Также если включен fb при старте системы, то при выходе из Х-ов
наблюдается также непонятно что (разноцветные цветные полосы ).
Зато 3D идет неплохо (по скорости).
Так что есть выбор либо без 3D, зато всё остальное в ажуре; либо с ним
но будут проблемы; также рекомендуют XF 4.3.0. (не пробовал).
--
С уважением,
metalking mailto:metalking@inbox.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Radeon 9000
2003-03-28 23:21 [Comm] Radeon 9000 metalking
2003-03-29 4:27 ` Compress
@ 2003-03-30 8:16 ` Ружников Вадим
1 sibling, 0 replies; 5+ messages in thread
From: Ружников Вадим @ 2003-03-30 8:16 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 669 bytes --]
В сообщении от 29 Март 2003 03:21 metalking написал:
> Поделитесь опытом как правильно это прикрутить. У родного
> драйвер (сборки ATI) ИМХО драйвер отдельно и модуль нужно
> собирать самому. В Master видно помогли народу и модуль
> собрали. Но не нашел как это конфигурируется (в ATIшном
> драйвере был конфигуратор).
Я прикручивал эти драйверы к ASP 7.3. Дам уже был собран какой-то
модуль к Radeon, они автоматически его определяли, дальше
компилил и все работало. Пришлось правда править Х-конфиг
вручную(см. в приложении).
А, что за модуль нужно собирать. Вот к примеру, в джуниоре 2.1,
мне не удалось эти драйверы поставить.
Р.S. У меня Radeon 9000Pro
[-- Attachment #2: XF86Config-4 --]
[-- Type: text/plain, Size: 8291 bytes --]
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
AllowMouseOpenFail
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
XkbModel "pc105"
XkbRules "xfree86"
XkbLayout "ru(winkeys)"
XkbOptions "grp:caps_toggle,grp_led:scroll"
EndSection
Section "Pointer"
Protocol "Microsoft"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# ZAxisMapping 4 5
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor"
VendorName "MEI"
ModelName "Panasonic P50"
HorizSync 30-71
VertRefresh 50-181
#Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
#Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
#800x600 @ 100.0 Hz, 64.0 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
#640x480 @ 100.0 Hz, 53.0 kHz hsync
# Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === Fire GL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "Display2" "0"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "GammaCorrectionI" "0x05d1745d"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0" # vendor=1002, device=496e
Videoram 131072
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1024 768
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
### EOF ###
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re[3]: [Comm] Radeon 9000
2003-03-29 20:00 ` Re[2]: " metalking
@ 2003-03-31 16:48 ` Compress
0 siblings, 0 replies; 5+ messages in thread
From: Compress @ 2003-03-31 16:48 UTC (permalink / raw)
To: metalking
Hello metalking,
Sunday, March 30, 2003, 12:00:14 AM, you wrote:
m> Здравствуйте, Compress.
m> Вы писали 29 марта 2003 г., 7:27:14:
C>> Hello metalking,
C>> Saturday, March 29, 2003, 2:21:37 AM, you wrote:
m>>> Доброго времени суток.
m>>> Недавно поставил себе сей девайс. Всё устраивает. О 3D даже и не
m>>> думал. Но случайно на диске обнаружил драйверы ATI если не ошибаюсь
m>>> называются fglx.
m>>> Система Master 2.2 beta доведена до Master 2.2.
m>>> Поделитесь опытом как правильно это прикрутить. У родного драйвер
m>>> (сборки ATI) ИМХО драйвер отдельно и модуль нужно собирать самому. В
m>>> Master видно помогли народу и модуль собрали. Но не нашел как это
m>>> конфигурируется (в ATIшном драйвере был конфигуратор).
m>>> Спасибо всем кто откликнулся.
C>> Наконец-то собрат по несчастью.У меня на ноуте чип тот же-R250(RADEON
C>> 9000),а видюха другая-ATI MOBILITY RADEON M9.Так вот я долго возился с
C>> дровами,и мой тебе совет-поставь Xfree 4.3.0.Будет меньше гимора.И там
C>> твоя карта(и моя)работает сразу в 3Д с ускорением и т.д.
m> Удалось запустить с дровами, что шли с мастером. Для этого
m> надо в конфигах вместо radeon прописать fglrx
m> Но только у меня проявляется другой глюк: Если запустить например
m> tuxracer с настройками по умолчанию то на вывод на экран неккоректен
m> (вместо изображения разноцветные прямоугольники).
m> Если сменить на настройки как у рабочего стола (у меня 1280*1024)то всё ОК.
m> Также если включен fb при старте системы, то при выходе из Х-ов
m> наблюдается также непонятно что (разноцветные цветные полосы ).
m> Зато 3D идет неплохо (по скорости).
m> Так что есть выбор либо без 3D, зато всё остальное в ажуре; либо с ним
m> но будут проблемы; также рекомендуют XF 4.3.0. (не пробовал).
А я настойчиво рекомендую.Сейчас поставил новую слаку с новыми иксами
и проблем вообще нет.А с драйвером пробовал-выдаёт типа given
weight(000)don't match with colour debth 32
--
Best regards,
Compress mailto:compress2002@mail.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-03-31 16:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-28 23:21 [Comm] Radeon 9000 metalking
2003-03-29 4:27 ` Compress
2003-03-29 20:00 ` Re[2]: " metalking
2003-03-31 16:48 ` Re[3]: " Compress
2003-03-30 8:16 ` Ружников Вадим
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git