Re: [Comm] Radeon 9000

["Ружников Вадим" <vadim_r@bee-s.com>]

[-- Attachment #1: Type: text/plain, Size: 669 bytes --]

В сообщении от 29 Март 2003 03:21 metalking написал:

> Поделитесь опытом как правильно это прикрутить. У родного
> драйвер (сборки ATI) ИМХО драйвер отдельно и модуль нужно
> собирать самому. В Master видно помогли народу и модуль
> собрали. Но не нашел как это конфигурируется (в ATIшном
> драйвере был конфигуратор).

Я прикручивал эти драйверы к ASP 7.3. Дам уже был собран какой-то 
модуль к Radeon, они автоматически его определяли, дальше 
компилил и все работало. Пришлось правда править Х-конфиг 
вручную(см. в приложении).

А, что за модуль нужно собирать. Вот к примеру, в джуниоре 2.1, 
мне не удалось эти драйверы поставить.

Р.S. У меня Radeon 9000Pro




[-- Attachment #2: XF86Config-4 --]
[-- Type: text/plain, Size: 8291 bytes --]

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"
	FontPath	"unix/:7100"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 


# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
    AllowMouseOpenFail
# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

Section "Keyboard"
	Protocol	"Standard"
	XkbModel	"pc105"
	XkbRules	"xfree86"
	XkbLayout	"ru(winkeys)"
	XkbOptions	"grp:caps_toggle,grp_led:scroll"
EndSection

Section "Pointer"
	Protocol	"Microsoft"
	Device	"/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate  9600
#    SampleRate  150

#	ZAxisMapping 4 5

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#	Emulate3Buttons
#	Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle
EndSection




# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
	Identifier	 "Monitor"
	VendorName	 "MEI"
	ModelName	 "Panasonic P50"
	HorizSync	 30-71
	VertRefresh	 50-181
#Modeline	"1024x768"	98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync	
#Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync
#800x600 @ 100.0 Hz, 64.0 kHz hsync
	Modeline	"800x600"	69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
#640x480 @ 100.0 Hz, 53.0 kHz hsync
#	Modeline	"640x480"	45.8   640  672  768  864   480  488  494  530 -HSync -VSync
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

    Driver      "vga"

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === Fire GL DDX driver module specific settings ===
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "Display2"                   "0"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "GammaCorrectionI"           "0x05d1745d"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
    BusID "PCI:1:0:0"    # vendor=1002, device=496e
    Videoram 131072
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "800x600"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1024 768
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
#	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
### EOF ###