* [#331664] TESTED linuxcnc.git=2.9.1-alt2.20231009
@ 2023-10-13 10:32 Girar awaiter (grenka)
2023-10-15 7:34 ` [#331664] DONE (try 2) linuxcnc.git=2.9.1-alt2.20231009 Girar pender (grenka)
0 siblings, 1 reply; 2+ messages in thread
From: Girar awaiter (grenka) @ 2023-10-13 10:32 UTC (permalink / raw)
To: Grigory Ustinov
Cc: sisyphus-incominger, girar-builder-sisyphus, Anton Midyukov
https://git.altlinux.org/tasks/331664/logs/events.1.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#100 linuxcnc 5:24 8:39 3:09 - 2:52
2023-Oct-13 10:15:02 :: test-only task #331664 for sisyphus started by grenka:
#100 build 2.9.1-alt2.20231009 from /people/grenka/packages/linuxcnc.git fetched at 2023-Oct-13 10:15:00
2023-Oct-13 10:15:03 :: [x86_64] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-13 10:15:03 :: [armh] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-13 10:15:03 :: [ppc64le] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-13 10:15:03 :: [i586] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-13 10:15:03 :: [aarch64] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-13 10:15:24 :: [ppc64le] #100 linuxcnc.git 2.9.1-alt2.20231009: build SKIPPED
2023-Oct-13 10:17:55 :: [x86_64] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK
2023-Oct-13 10:18:12 :: [i586] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK
2023-Oct-13 10:20:27 :: [aarch64] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK
2023-Oct-13 10:23:42 :: [armh] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK
2023-Oct-13 10:24:09 :: #100: linuxcnc.git 2.9.1-alt2.20231009: build check OK
2023-Oct-13 10:24:09 :: build check OK
2023-Oct-13 10:24:28 :: noarch check OK
2023-Oct-13 10:24:30 :: plan: src +1 -1 =18650, aarch64 +5 -5 =31751, armh +5 -5 =29574, i586 +5 -5 =31602, x86_64 +5 -5 =32644
#100 linuxcnc 2.9.1-alt1.20231009 -> 2.9.1-alt2.20231009
Fri Oct 13 2023 Grigory Ustinov <grenka@altlinux> 2.9.1-alt2.20231009
- NMU: dropped dependency on distutils.
2023-Oct-13 10:25:16 :: patched apt indices
2023-Oct-13 10:25:33 :: created next repo
2023-Oct-13 10:25:42 :: duplicate provides check OK
2023-Oct-13 10:26:22 :: dependencies check OK
2023-Oct-13 10:26:53 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2023-Oct-13 10:27:05 :: [i586] #100 liblinuxcnc: install check OK
2023-Oct-13 10:27:05 :: [x86_64] #100 liblinuxcnc: install check OK
2023-Oct-13 10:27:14 :: [i586] #100 liblinuxcnc-debuginfo: install check OK
2023-Oct-13 10:27:14 :: [x86_64] #100 liblinuxcnc-debuginfo: install check OK
2023-Oct-13 10:27:15 :: [aarch64] #100 liblinuxcnc: install check OK
2023-Oct-13 10:27:25 :: [armh] #100 liblinuxcnc: install check OK
2023-Oct-13 10:27:31 :: [aarch64] #100 liblinuxcnc-debuginfo: install check OK
2023-Oct-13 10:27:40 :: [x86_64] #100 liblinuxcnc-devel: install check OK
2023-Oct-13 10:27:42 :: [i586] #100 liblinuxcnc-devel: install check OK
2023-Oct-13 10:27:51 :: [armh] #100 liblinuxcnc-debuginfo: install check OK
x86_64: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-13 10:28:06 :: [x86_64] #100 linuxcnc: install check OK
i586: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-13 10:28:10 :: [i586] #100 linuxcnc: install check OK
2023-Oct-13 10:28:14 :: [aarch64] #100 liblinuxcnc-devel: install check OK
2023-Oct-13 10:28:39 :: [x86_64] #100 linuxcnc-debuginfo: install check OK
2023-Oct-13 10:28:47 :: [i586] #100 linuxcnc-debuginfo: install check OK
aarch64: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-13 10:28:57 :: [aarch64] #100 linuxcnc: install check OK
2023-Oct-13 10:29:00 :: [armh] #100 liblinuxcnc-devel: install check OK
2023-Oct-13 10:29:50 :: [aarch64] #100 linuxcnc-debuginfo: install check OK
armh: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-13 10:30:08 :: [armh] #100 linuxcnc: install check OK
2023-Oct-13 10:31:33 :: [armh] #100 linuxcnc-debuginfo: install check OK
2023-Oct-13 10:31:34 :: [x86_64-i586] plan: #3 +3 -3 =10753
2023-Oct-13 10:31:55 :: [x86_64-i586] arepo build OK
2023-Oct-13 10:32:10 :: [x86_64-i586] generated apt indices
2023-Oct-13 10:32:12 :: [x86_64-i586] created next repo
2023-Oct-13 10:32:22 :: [x86_64-i586] dependencies check OK
2023-Oct-13 10:32:23 :: gears inheritance check OK
2023-Oct-13 10:32:23 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for grenka: project leader welcomes random builders
check-subtask-perms: #100: linuxcnc: allowed for grenka
2023-Oct-13 10:32:23 :: acl check OK
2023-Oct-13 10:32:34 :: created contents_index files
2023-Oct-13 10:32:43 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2023-Oct-13 10:32:46 :: task #331664 for sisyphus TESTED
^ permalink raw reply [flat|nested] 2+ messages in thread
* [#331664] DONE (try 2) linuxcnc.git=2.9.1-alt2.20231009
2023-10-13 10:32 [#331664] TESTED linuxcnc.git=2.9.1-alt2.20231009 Girar awaiter (grenka)
@ 2023-10-15 7:34 ` Girar pender (grenka)
0 siblings, 0 replies; 2+ messages in thread
From: Girar pender (grenka) @ 2023-10-15 7:34 UTC (permalink / raw)
To: Grigory Ustinov
Cc: sisyphus-incominger, girar-builder-sisyphus, Anton Midyukov
https://git.altlinux.org/tasks/archive/done/_323/331664/logs/events.2.2.log
2023-Oct-15 07:28:48 :: task #331664 for sisyphus resumed by grenka:
#100 build 2.9.1-alt2.20231009 from /people/grenka/packages/linuxcnc.git fetched at 2023-Oct-13 10:15:00
2023-Oct-15 07:28:50 :: [ppc64le] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-15 07:28:50 :: [armh] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-15 07:28:50 :: [aarch64] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-15 07:28:50 :: [x86_64] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-15 07:28:50 :: [i586] #100 linuxcnc.git 2.9.1-alt2.20231009: build start
2023-Oct-15 07:29:01 :: [i586] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK (cached)
2023-Oct-15 07:29:01 :: [x86_64] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK (cached)
2023-Oct-15 07:29:09 :: [aarch64] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK (cached)
2023-Oct-15 07:29:13 :: [ppc64le] #100 linuxcnc.git 2.9.1-alt2.20231009: build SKIPPED
2023-Oct-15 07:29:18 :: [armh] #100 linuxcnc.git 2.9.1-alt2.20231009: build OK (cached)
2023-Oct-15 07:29:44 :: #100: linuxcnc.git 2.9.1-alt2.20231009: build check OK
2023-Oct-15 07:29:45 :: build check OK
2023-Oct-15 07:30:03 :: noarch check OK
2023-Oct-15 07:30:06 :: plan: src +1 -1 =18654, aarch64 +5 -5 =31663, armh +5 -5 =29486, i586 +5 -5 =31515, x86_64 +5 -5 =32554
#100 linuxcnc 2.9.1-alt1.20231009 -> 2.9.1-alt2.20231009
Fri Oct 13 2023 Grigory Ustinov <grenka@altlinux> 2.9.1-alt2.20231009
- NMU: dropped dependency on distutils.
2023-Oct-15 07:30:46 :: patched apt indices
2023-Oct-15 07:30:58 :: created next repo
2023-Oct-15 07:31:07 :: duplicate provides check OK
2023-Oct-15 07:31:42 :: dependencies check OK
2023-Oct-15 07:32:05 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2023-Oct-15 07:32:16 :: [x86_64] #100 liblinuxcnc: install check OK (cached)
2023-Oct-15 07:32:17 :: [i586] #100 liblinuxcnc: install check OK (cached)
2023-Oct-15 07:32:20 :: [x86_64] #100 liblinuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:32:21 :: [i586] #100 liblinuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:32:22 :: [aarch64] #100 liblinuxcnc: install check OK (cached)
2023-Oct-15 07:32:25 :: [x86_64] #100 liblinuxcnc-devel: install check OK (cached)
2023-Oct-15 07:32:26 :: [i586] #100 liblinuxcnc-devel: install check OK (cached)
2023-Oct-15 07:32:29 :: [aarch64] #100 liblinuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:32:30 :: [armh] #100 liblinuxcnc: install check OK (cached)
x86_64: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-15 07:32:30 :: [x86_64] #100 linuxcnc: install check OK (cached)
i586: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-15 07:32:31 :: [i586] #100 linuxcnc: install check OK (cached)
2023-Oct-15 07:32:36 :: [x86_64] #100 linuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:32:36 :: [i586] #100 linuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:32:39 :: [aarch64] #100 liblinuxcnc-devel: install check OK (cached)
2023-Oct-15 07:32:42 :: [armh] #100 liblinuxcnc-debuginfo: install check OK (cached)
aarch64: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-15 07:32:47 :: [aarch64] #100 linuxcnc: install check OK (cached)
2023-Oct-15 07:32:56 :: [armh] #100 liblinuxcnc-devel: install check OK (cached)
2023-Oct-15 07:32:57 :: [aarch64] #100 linuxcnc-debuginfo: install check OK (cached)
armh: linuxcnc=2.9.1-alt2.20231009 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Oct-15 07:33:10 :: [armh] #100 linuxcnc: install check OK (cached)
2023-Oct-15 07:33:24 :: [armh] #100 linuxcnc-debuginfo: install check OK (cached)
2023-Oct-15 07:33:26 :: [x86_64-i586] plan: #0 +3 -3 =10710
2023-Oct-15 07:33:40 :: [x86_64-i586] generated apt indices
2023-Oct-15 07:33:42 :: [x86_64-i586] created next repo
2023-Oct-15 07:33:51 :: [x86_64-i586] dependencies check OK
2023-Oct-15 07:33:52 :: gears inheritance check OK
2023-Oct-15 07:33:53 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for grenka: project leader welcomes random builders
check-subtask-perms: #100: linuxcnc: allowed for grenka
2023-Oct-15 07:33:53 :: acl check OK
2023-Oct-15 07:34:05 :: created contents_index files
2023-Oct-15 07:34:14 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2023-Oct-15 07:34:17 :: task #331664 for sisyphus TESTED
2023-Oct-15 07:34:17 :: task is ready for commit
2023-Oct-15 07:34:23 :: repo clone OK
2023-Oct-15 07:34:23 :: packages update OK
2023-Oct-15 07:34:31 :: [x86_64 i586 aarch64 armh] update OK
2023-Oct-15 07:34:31 :: [x86_64-i586] update OK
2023-Oct-15 07:34:31 :: repo update OK
2023-Oct-15 07:34:44 :: repo save OK
2023-Oct-15 07:34:44 :: src index update OK
2023-Oct-15 07:34:44 :: updated /gears/l/linuxcnc.git branch `sisyphus'
2023-Oct-15 07:34:54 :: gears update OK
2023-Oct-15 07:34:54 :: task #331664 for sisyphus DONE
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-10-15 7:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-13 10:32 [#331664] TESTED linuxcnc.git=2.9.1-alt2.20231009 Girar awaiter (grenka)
2023-10-15 7:34 ` [#331664] DONE (try 2) linuxcnc.git=2.9.1-alt2.20231009 Girar pender (grenka)
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git