* [#329266] TESTED linuxcnc.git=2.9.0-alt0.10.20230910
@ 2023-09-11 9:02 Girar awaiter (antohami)
2023-09-11 10:23 ` [#329266] TESTED (try 2) linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
2023-09-11 10:57 ` [#329266] DONE (try 3) linuxcnc.git=2.9.0-alt0.10.20230910 Girar pender (antohami)
0 siblings, 2 replies; 3+ messages in thread
From: Girar awaiter (antohami) @ 2023-09-11 9:02 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/329266/logs/events.1.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#100 linuxcnc 5:28 8:37 3:12 - 2:54
2023-Sep-11 08:44:52 :: test-only task #329266 for sisyphus started by antohami:
#100 build 2.9.0-alt0.10.20230910 from /people/antohami/packages/linuxcnc.git fetched at 2023-Sep-11 08:44:49
2023-Sep-11 08:44:55 :: [aarch64] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 08:44:55 :: [ppc64le] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 08:44:55 :: [x86_64] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 08:44:55 :: [i586] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 08:44:55 :: [armh] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 08:45:17 :: [ppc64le] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build SKIPPED
2023-Sep-11 08:47:49 :: [x86_64] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 08:48:07 :: [i586] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 08:50:23 :: [aarch64] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 08:53:32 :: [armh] #100 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 08:53:57 :: #100: linuxcnc.git 2.9.0-alt0.10.20230910: build check OK
2023-Sep-11 08:53:59 :: build check OK
2023-Sep-11 08:54:18 :: noarch check OK
2023-Sep-11 08:54:20 :: plan: src +1 -1 =18604, aarch64 +5 -5 =31858, armh +5 -5 =29681, i586 +5 -5 =31726, x86_64 +5 -5 =32770
#100 linuxcnc 2.9.0-alt0.9.20230413 -> 2.9.0-alt0.10.20230910
Mon Sep 11 2023 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.10.20230910
- new snapshot
- generate patch using git diff instead of individual patches
2023-Sep-11 08:55:00 :: patched apt indices
2023-Sep-11 08:55:13 :: created next repo
2023-Sep-11 08:55:22 :: duplicate provides check OK
2023-Sep-11 08:55:59 :: dependencies check OK
2023-Sep-11 08:56:37 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2023-Sep-11 08:56:50 :: [x86_64] #100 liblinuxcnc: install check OK
2023-Sep-11 08:56:50 :: [i586] #100 liblinuxcnc: install check OK
2023-Sep-11 08:56:58 :: [x86_64] #100 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 08:56:59 :: [i586] #100 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 08:56:59 :: [aarch64] #100 liblinuxcnc: install check OK
2023-Sep-11 08:57:11 :: [armh] #100 liblinuxcnc: install check OK
2023-Sep-11 08:57:16 :: [aarch64] #100 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 08:57:24 :: [x86_64] #100 liblinuxcnc-devel: install check OK
2023-Sep-11 08:57:28 :: [i586] #100 liblinuxcnc-devel: install check OK
2023-Sep-11 08:57:37 :: [armh] #100 liblinuxcnc-debuginfo: install check OK
x86_64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 08:57:49 :: [x86_64] #100 linuxcnc: install check OK
i586: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 08:57:56 :: [i586] #100 linuxcnc: install check OK
2023-Sep-11 08:57:59 :: [aarch64] #100 liblinuxcnc-devel: install check OK
2023-Sep-11 08:58:21 :: [x86_64] #100 linuxcnc-debuginfo: install check OK
2023-Sep-11 08:58:32 :: [i586] #100 linuxcnc-debuginfo: install check OK
aarch64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 08:58:41 :: [aarch64] #100 linuxcnc: install check OK
2023-Sep-11 08:58:45 :: [armh] #100 liblinuxcnc-devel: install check OK
2023-Sep-11 08:59:34 :: [aarch64] #100 linuxcnc-debuginfo: install check OK
armh: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 08:59:52 :: [armh] #100 linuxcnc: install check OK
2023-Sep-11 09:01:16 :: [armh] #100 linuxcnc-debuginfo: install check OK
2023-Sep-11 09:01:18 :: [x86_64-i586] plan: #3 +3 -3 =10850
2023-Sep-11 09:01:40 :: [x86_64-i586] arepo build OK
2023-Sep-11 09:01:57 :: [x86_64-i586] generated apt indices
2023-Sep-11 09:01:59 :: [x86_64-i586] created next repo
2023-Sep-11 09:02:10 :: [x86_64-i586] dependencies check OK
2023-Sep-11 09:02:11 :: gears inheritance check OK
2023-Sep-11 09:02:12 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #100: linuxcnc: allowed for antohami
2023-Sep-11 09:02:13 :: acl check OK
2023-Sep-11 09:02:26 :: created contents_index files
2023-Sep-11 09:02:43 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2023-Sep-11 09:02:46 :: task #329266 for sisyphus TESTED
^ permalink raw reply [flat|nested] 3+ messages in thread
* [#329266] TESTED (try 2) linuxcnc.git=2.9.0-alt0.10.20230910
2023-09-11 9:02 [#329266] TESTED linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
@ 2023-09-11 10:23 ` Girar awaiter (antohami)
2023-09-11 10:57 ` [#329266] DONE (try 3) linuxcnc.git=2.9.0-alt0.10.20230910 Girar pender (antohami)
1 sibling, 0 replies; 3+ messages in thread
From: Girar awaiter (antohami) @ 2023-09-11 10:23 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/329266/logs/events.2.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#200 linuxcnc 5:36 8:40 3:13 - 2:57
2023-Sep-11 10:05:01 :: test-only task #329266 for sisyphus resumed by antohami:
#100 removed
#200 build 2.9.0-alt0.10.20230910 from /people/antohami/packages/linuxcnc.git fetched at 2023-Sep-11 10:04:46
2023-Sep-11 10:05:03 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:05:03 :: [i586] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:05:03 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:05:03 :: [armh] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:05:03 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:05:27 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build SKIPPED
2023-Sep-11 10:08:00 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 10:08:16 :: [i586] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 10:10:39 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 10:13:43 :: [armh] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK
2023-Sep-11 10:14:11 :: #200: linuxcnc.git 2.9.0-alt0.10.20230910: build check OK
2023-Sep-11 10:14:13 :: build check OK
2023-Sep-11 10:14:33 :: noarch check OK
2023-Sep-11 10:14:36 :: plan: src +1 -1 =18605, aarch64 +5 -5 =31860, armh +5 -5 =29683, i586 +5 -5 =31728, x86_64 +5 -5 =32772
#200 linuxcnc 2.9.0-alt0.9.20230413 -> 2.9.0-alt0.10.20230910
Mon Sep 11 2023 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.10.20230910
- new snapshot
- generate patch using git diff instead of individual patches
2023-Sep-11 10:15:22 :: patched apt indices
2023-Sep-11 10:15:37 :: created next repo
2023-Sep-11 10:15:47 :: duplicate provides check OK
2023-Sep-11 10:16:25 :: dependencies check OK
2023-Sep-11 10:16:56 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2023-Sep-11 10:17:09 :: [i586] #200 liblinuxcnc: install check OK
2023-Sep-11 10:17:09 :: [x86_64] #200 liblinuxcnc: install check OK
2023-Sep-11 10:17:18 :: [x86_64] #200 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 10:17:19 :: [i586] #200 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 10:17:19 :: [aarch64] #200 liblinuxcnc: install check OK
2023-Sep-11 10:17:30 :: [armh] #200 liblinuxcnc: install check OK
2023-Sep-11 10:17:36 :: [aarch64] #200 liblinuxcnc-debuginfo: install check OK
2023-Sep-11 10:17:44 :: [x86_64] #200 liblinuxcnc-devel: install check OK
2023-Sep-11 10:17:47 :: [i586] #200 liblinuxcnc-devel: install check OK
2023-Sep-11 10:17:57 :: [armh] #200 liblinuxcnc-debuginfo: install check OK
x86_64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:18:10 :: [x86_64] #200 linuxcnc: install check OK
i586: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:18:15 :: [i586] #200 linuxcnc: install check OK
2023-Sep-11 10:18:19 :: [aarch64] #200 liblinuxcnc-devel: install check OK
2023-Sep-11 10:18:42 :: [x86_64] #200 linuxcnc-debuginfo: install check OK
2023-Sep-11 10:18:51 :: [i586] #200 linuxcnc-debuginfo: install check OK
aarch64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:19:01 :: [aarch64] #200 linuxcnc: install check OK
2023-Sep-11 10:19:05 :: [armh] #200 liblinuxcnc-devel: install check OK
2023-Sep-11 10:19:54 :: [aarch64] #200 linuxcnc-debuginfo: install check OK
armh: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:20:12 :: [armh] #200 linuxcnc: install check OK
2023-Sep-11 10:21:37 :: [armh] #200 linuxcnc-debuginfo: install check OK
2023-Sep-11 10:21:39 :: [x86_64-i586] plan: #3 +3 -3 =10850
2023-Sep-11 10:22:01 :: [x86_64-i586] arepo build OK
2023-Sep-11 10:22:18 :: [x86_64-i586] generated apt indices
2023-Sep-11 10:22:20 :: [x86_64-i586] created next repo
2023-Sep-11 10:22:31 :: [x86_64-i586] dependencies check OK
2023-Sep-11 10:22:32 :: gears inheritance check OK
2023-Sep-11 10:22:33 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #200: linuxcnc: allowed for antohami
2023-Sep-11 10:22:33 :: acl check OK
2023-Sep-11 10:22:46 :: created contents_index files
2023-Sep-11 10:22:56 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2023-Sep-11 10:22:59 :: task #329266 for sisyphus TESTED
^ permalink raw reply [flat|nested] 3+ messages in thread
* [#329266] DONE (try 3) linuxcnc.git=2.9.0-alt0.10.20230910
2023-09-11 9:02 [#329266] TESTED linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
2023-09-11 10:23 ` [#329266] TESTED (try 2) linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
@ 2023-09-11 10:57 ` Girar pender (antohami)
1 sibling, 0 replies; 3+ messages in thread
From: Girar pender (antohami) @ 2023-09-11 10:57 UTC (permalink / raw)
To: Anton Midyukov; +Cc: sisyphus-incominger, girar-builder-sisyphus
https://git.altlinux.org/tasks/archive/done/_321/329266/logs/events.3.2.log
2023-Sep-11 10:47:27 :: task #329266 for sisyphus resumed by antohami:
#100 removed
#200 build 2.9.0-alt0.10.20230910 from /people/antohami/packages/linuxcnc.git fetched at 2023-Sep-11 10:04:46
2023-Sep-11 10:47:27 :: waiting for a shared lock on sisyphus
2023-Sep-11 10:50:49 :: acquired a shared lock on sisyphus
2023-Sep-11 10:50:51 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:50:51 :: [armh] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:50:51 :: [i586] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:50:51 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:50:51 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build start
2023-Sep-11 10:51:01 :: [i586] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK (cached)
2023-Sep-11 10:51:01 :: [x86_64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK (cached)
2023-Sep-11 10:51:10 :: [aarch64] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK (cached)
2023-Sep-11 10:51:12 :: [ppc64le] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build SKIPPED
2023-Sep-11 10:51:18 :: [armh] #200 linuxcnc.git 2.9.0-alt0.10.20230910: build OK (cached)
2023-Sep-11 10:51:45 :: #200: linuxcnc.git 2.9.0-alt0.10.20230910: build check OK
2023-Sep-11 10:51:47 :: build check OK
2023-Sep-11 10:52:07 :: noarch check OK
2023-Sep-11 10:52:10 :: plan: src +1 -1 =18605, aarch64 +5 -5 =31860, armh +5 -5 =29683, i586 +5 -5 =31728, x86_64 +5 -5 =32772
#200 linuxcnc 2.9.0-alt0.9.20230413 -> 2.9.0-alt0.10.20230910
Mon Sep 11 2023 Anton Midyukov <antohami@altlinux> 2.9.0-alt0.10.20230910
- new snapshot
- generate patch using git diff instead of individual patches
2023-Sep-11 10:52:54 :: patched apt indices
2023-Sep-11 10:53:08 :: created next repo
2023-Sep-11 10:53:17 :: duplicate provides check OK
2023-Sep-11 10:53:56 :: dependencies check OK
2023-Sep-11 10:53:57 :: [i586 armh] no need to repeat ELF symbols check
2023-Sep-11 10:54:20 :: [x86_64 i586 aarch64 armh] ELF symbols check OK
2023-Sep-11 10:54:30 :: [i586] #200 liblinuxcnc: install check OK (cached)
2023-Sep-11 10:54:30 :: [x86_64] #200 liblinuxcnc: install check OK (cached)
2023-Sep-11 10:54:33 :: [i586] #200 liblinuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:54:33 :: [x86_64] #200 liblinuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:54:37 :: [aarch64] #200 liblinuxcnc: install check OK (cached)
2023-Sep-11 10:54:37 :: [i586] #200 liblinuxcnc-devel: install check OK (cached)
2023-Sep-11 10:54:38 :: [x86_64] #200 liblinuxcnc-devel: install check OK (cached)
i586: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:54:41 :: [i586] #200 linuxcnc: install check OK (cached)
x86_64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:54:42 :: [x86_64] #200 linuxcnc: install check OK (cached)
2023-Sep-11 10:54:45 :: [aarch64] #200 liblinuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:54:45 :: [armh] #200 liblinuxcnc: install check OK (cached)
2023-Sep-11 10:54:46 :: [i586] #200 linuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:54:47 :: [x86_64] #200 linuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:54:54 :: [aarch64] #200 liblinuxcnc-devel: install check OK (cached)
2023-Sep-11 10:54:57 :: [armh] #200 liblinuxcnc-debuginfo: install check OK (cached)
aarch64: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:55:02 :: [aarch64] #200 linuxcnc: install check OK (cached)
2023-Sep-11 10:55:11 :: [armh] #200 liblinuxcnc-devel: install check OK (cached)
2023-Sep-11 10:55:12 :: [aarch64] #200 linuxcnc-debuginfo: install check OK (cached)
armh: linuxcnc=2.9.0-alt0.10.20230910 post-install unowned files:
/etc/X11/app-defaults
/usr/share/gtksourceview-2.0
2023-Sep-11 10:55:24 :: [armh] #200 linuxcnc: install check OK (cached)
2023-Sep-11 10:55:39 :: [armh] #200 linuxcnc-debuginfo: install check OK (cached)
2023-Sep-11 10:55:41 :: [x86_64-i586] plan: #0 +3 -3 =10850
2023-Sep-11 10:55:59 :: [x86_64-i586] generated apt indices
2023-Sep-11 10:56:01 :: [x86_64-i586] created next repo
2023-Sep-11 10:56:14 :: [x86_64-i586] dependencies check OK
2023-Sep-11 10:56:15 :: gears inheritance check OK
2023-Sep-11 10:56:16 :: srpm inheritance check OK
girar-check-perms: access to linuxcnc ALLOWED for antohami: project leader
check-subtask-perms: #200: linuxcnc: allowed for antohami
2023-Sep-11 10:56:16 :: acl check OK
2023-Sep-11 10:56:31 :: created contents_index files
2023-Sep-11 10:56:41 :: created hash files: aarch64 armh i586 src x86_64-i586 x86_64
2023-Sep-11 10:56:44 :: task #329266 for sisyphus TESTED
2023-Sep-11 10:56:45 :: task is ready for commit
2023-Sep-11 10:56:50 :: repo clone OK
2023-Sep-11 10:56:51 :: packages update OK
2023-Sep-11 10:57:01 :: [x86_64 i586 aarch64 armh] update OK
2023-Sep-11 10:57:01 :: [x86_64-i586] update OK
2023-Sep-11 10:57:01 :: repo update OK
2023-Sep-11 10:57:15 :: repo save OK
2023-Sep-11 10:57:15 :: src index update OK
2023-Sep-11 10:57:17 :: updated /gears/l/linuxcnc.git branch `sisyphus'
2023-Sep-11 10:57:28 :: gears update OK
2023-Sep-11 10:57:28 :: task #329266 for sisyphus DONE
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-09-11 10:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-09-11 9:02 [#329266] TESTED linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
2023-09-11 10:23 ` [#329266] TESTED (try 2) linuxcnc.git=2.9.0-alt0.10.20230910 Girar awaiter (antohami)
2023-09-11 10:57 ` [#329266] DONE (try 3) linuxcnc.git=2.9.0-alt0.10.20230910 Girar pender (antohami)
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git