ALT Linux users (in English only)
 help / color / mirror / Atom feed
* [Comm-en] Xfree86 Hardware Acceleration
@ 2003-09-09  3:04 Jordan Patterson
  2003-09-09  7:04 ` Michael Shigorin
  0 siblings, 1 reply; 2+ messages in thread
From: Jordan Patterson @ 2003-09-09  3:04 UTC (permalink / raw)
  To: community-en

Hi.  I recently installed Alt Linux Junior and did a dist-upgrade to the Sisyphus 
repository.  The sound failed to work afterwords, but I got that fixed by reading 
through the mailing list and finding the fix.  When XFree86 updated however, 3d 
acceration stopped working my 3d games(Gltron and tuxracer).  I tried to boot up with 
knoppix and add any useful changes to XFree86Config-4, but I have so far been 
unable to fix anything.  Does anybody know what could be wrong?  My 
XFree86Config-4 file is pasted below.  Thanks to anyone that helps out. 
 
Jordan 
 
 
 
# File generated by XFdrake. 
 
# ********************************************************************** 
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file. 
# ********************************************************************** 
 
Section "Files" 
 
    RgbPath	"/usr/X11R6/lib/X11/rgb" 
 
# Multiple FontPath entries are allowed (they are concatenated together) 
# By default, Mandrake 6.0 and later now use a font server independent of 
# the X server to render fonts. 
 
    FontPath   "unix/:-1" 
 
EndSection 
 
# ********************************************************************** 
# Server flags section. 
# ********************************************************************** 
 
Section "ServerFlags" 
 
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may 
    # provide a better stack trace in the core dump to aid in debugging 
    #NoTrapSignals 
 
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence 
    # This allows clients to receive this key event. 
    #DontZap 
 
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching 
    # sequences.  This allows clients to receive these key events. 
    #DontZoom 
 
    # This  allows  the  server  to start up even if the 
    # mouse device can't be opened/initialised. 
    AllowMouseOpenFail 
 
EndSection 
 
# ********************************************************************** 
# Input devices 
# ********************************************************************** 
 
# ********************************************************************** 
# Keyboard section 
# ********************************************************************** 
 
Section "InputDevice" 
 
    Identifier "Keyboard1" 
    Driver      "Keyboard" 
    Option "AutoRepeat"  "250 30" 
 
    Option "XkbRules" "xfree86" 
    Option "XkbModel" "pc105" 
    Option "XkbLayout" "us" 
 
EndSection 
 
# ********************************************************************** 
# Pointer section 
# ********************************************************************** 
 
Section "InputDevice" 
 
    Identifier  "Mouse1" 
    Driver      "mouse" 
    Option "Protocol"    "PS/2" 
    Option "Device"      "/dev/mouse" 
    Option "Emulate3Buttons" 
    Option "Emulate3Timeout" "50" 
 
# ChordMiddle is an option for some 3-button Logitech mice 
 
#    Option "ChordMiddle" 
 
EndSection 
 
Section "InputDevice" 
  Identifier  "Mouse2" 
  Driver      "mouse" 
  Option      "Device"    "/dev/input/mice" 
  Option      "SendCoreEvents"   "true" 
  Option      "Protocol"      "IMPS/2" 
  Option      "ZAxisMapping"   "4 5" 
  Option      "Buttons"       "5" 
EndSection 
 
 
 
Section "Module" 
 
# This loads the DBE extension module. 
 
    Load	"dbe" 
 
    Load	"glx" 
    Load	"dri" 
 
 
# This loads the miscellaneous extensions module, and disables 
# initialisation of the XFree86-DGA extension within that module. 
 
    SubSection	"extmod" 
	#Option	"omit xfree86-dga" 
 
    EndSubSection 
 
# This loads the Type1 and FreeType font modules 
 
    Load	"type1" 
    Load	"freetype" 
EndSection 
 
 
Section "DRI" 
    Mode	0666 
EndSection 
 
 
# ********************************************************************** 
# Monitor section 
# ********************************************************************** 
 
# Any number of monitor sections may be present 
 
Section "Monitor" 
    Identifier "Generic|Flat Panel 1400x1050" 
    VendorName "Generic" 
    ModelName  "Unknown" 
 
 
# HorizSync is in kHz unless units are specified. 
# HorizSync may be a comma separated list of discrete values, or a 
# comma separated list of ranges of values. 
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR 
MONITOR'S 
# USER MANUAL FOR THE CORRECT NUMBERS. 
    HorizSync  31.5-90 
 
 
# VertRefresh is in Hz unless units are specified. 
# VertRefresh may be a comma separated list of discrete values, or a 
# comma separated list of ranges of values. 
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR 
MONITOR'S 
# USER MANUAL FOR THE CORRECT NUMBERS. 
    VertRefresh 59-75 
 
 
# This is a set of extended mode timings typically used for laptop, 
# TV fullscreen mode or DVD fullscreen output. 
# These are available along with standard mode timings. 
 
# Sony Vaio C1(X,XS,VE,VN)? 
# 1024x480 @ 85.6 Hz, 48 kHz hsync 
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync 
-vsync 
 
# 768x576 @ 79 Hz, 50 kHz hsync 
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630 
# 768x576 @ 100 Hz, 61.6 kHz hsync 
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616 
Modeline "640x480"   25.175 640 664 760 800 480 491 493 525 #60Hz 
Modeline "800x600"   40.12  800 848 968 1056 600 601 605 628 #60Hz 
Modeline "1024x768"  85 1024 1056 1152 1360 768 784 787 823 
Modeline "1152x864"  92 1152 1208 1368 1474 864 865 875 895 
Modeline "1152x864"  110 1152 1240 1324 1552 864 864 876 908 
Modeline "1152x864"  135 1152 1464 1592 1776 864 864 876 908 
Modeline "1152x864"  137.65 1152 1184 1312 1536 864 866 885 902 -Hsync 
-Vsync 
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace 
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -Hsync 
-Vsync 
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +Hsync 
+Vsync 
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -Hsync 
-Vsync 
 
 
EndSection 
 
 
 
# ********************************************************************** 
# Graphics device section 
# ********************************************************************** 
 
 
Section "Device" 
    Identifier  "ATI Radeon" 
    Driver      "radeon" 
    VendorName  "All" 
    BoardName   "All" 
#    VideoRam    32768 
    # Clock lines 
 
 
    # Uncomment following option if you see a big white block 
    # instead of the cursor! 
    Option      "sw_cursor" 
 
EndSection 
 
 
 
# ********************************************************************** 
# Screen sections 
# ********************************************************************** 
 
 
Section "Screen" 
    Identifier "screen1" 
    Device      "ATI Radeon" 
    Monitor     "Generic|Flat Panel 1400x1050" 
    DefaultColorDepth 16 
    Subsection "Display" 
        Depth       8 
        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" 
"640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       15 
        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" 
"640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       16 
        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" 
"640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       24 
        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" 
"640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       32 
        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" 
"640x480" 
        ViewPort    0 0 
    EndSubsection 
EndSection 
 
 
Section "ServerLayout" 
    Identifier "layout1" 
    Screen     "screen1" 
 
    InputDevice "Mouse1" "CorePointer" 
    InputDevice "Mouse2" "CorePointer" 
    InputDevice "Keyboard1" "CoreKeyboard" 
EndSection 
 


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Comm-en] Xfree86 Hardware Acceleration
  2003-09-09  3:04 [Comm-en] Xfree86 Hardware Acceleration Jordan Patterson
@ 2003-09-09  7:04 ` Michael Shigorin
  0 siblings, 0 replies; 2+ messages in thread
From: Michael Shigorin @ 2003-09-09  7:04 UTC (permalink / raw)
  To: community-en

On Mon, Sep 08, 2003 at 11:04:27PM -0400, Jordan Patterson wrote:
> Hi.  I recently installed Alt Linux Junior and did a
> dist-upgrade to the Sisyphus repository.

Ugh.  Was this needed or "for curiousity"?  Generally major
breakage can occur if you don't expect it while following
unstable branches.

> The sound failed to work afterwords, but I got that fixed by
> reading through the mailing list and finding the fix.  When
> XFree86 updated however, 3d acceration stopped working my 3d
> games(Gltron and tuxracer).  I tried to boot up with knoppix
> and add any useful changes to XFree86Config-4, but I have so
> far been unable to fix anything.  Does anybody know what could
> be wrong?  My XFree86Config-4 file is pasted below.  Thanks to
> anyone that helps out. 

Which kernel do you run? (show the output of "uname -r" command)

If 2.4.21*std-up, then you'd install kernel-modules-dri-std-up
package which has proper DRI driver for Radeons.

>     Driver      "radeon" 

Also you could try to babelfish through http://atmsk.ru
(http://babelfish.altavista.com) -- there's a decent quantity of
relevant information there.

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-09-09  7:04 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-09  3:04 [Comm-en] Xfree86 Hardware Acceleration Jordan Patterson
2003-09-09  7:04 ` Michael Shigorin

ALT Linux users (in English only)

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community-en/0 community-en/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community-en community-en/ http://lore.altlinux.org/community-en \
		community-en@lists.altlinux.org community-en@lists.altlinux.ru community-en@lists.altlinux.com
	public-inbox-index community-en

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community-en


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git