From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: "Jordan Patterson" To: community-en@altlinux.org X-Mailer: NeoMail 1.25 X-IPAddress: 209.89.194.199 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Message-Id: Date: Mon, 08 Sep 2003 23:04:27 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - fastbox01.hbxnet.net X-AntiAbuse: Original Domain - altlinux.org X-AntiAbuse: Originator/Caller UID/GID - [561 562] / [47 12] X-AntiAbuse: Sender Address Domain - fastbox01.hbxnet.net Subject: [Comm-en] Xfree86 Hardware Acceleration X-BeenThere: community-en@altlinux.org X-Mailman-Version: 2.1.2 Precedence: list Reply-To: community-en@altlinux.org List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Sep 2003 03:04:32 -0000 Archived-At: List-Archive: List-Post: Hi. I recently installed Alt Linux Junior and did a dist-upgrade to the Sisyphus repository. The sound failed to work afterwords, but I got that fixed by reading through the mailing list and finding the fix. When XFree86 updated however, 3d acceration stopped working my 3d games(Gltron and tuxracer). I tried to boot up with knoppix and add any useful changes to XFree86Config-4, but I have so far been unable to fix anything. Does anybody know what could be wrong? My XFree86Config-4 file is pasted below. Thanks to anyone that helps out. Jordan # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/mouse" Option "Emulate3Buttons" Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection Section "InputDevice" Identifier "Mouse2" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "Module" # This loads the DBE extension module. Load "dbe" Load "glx" Load "dri" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" #Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" EndSection Section "DRI" Mode 0666 EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic|Flat Panel 1400x1050" VendorName "Generic" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-90 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 59-75 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823 Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -Hsync -Vsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -Hsync -Vsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +Hsync +Vsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -Hsync -Vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "ATI Radeon" Driver "radeon" VendorName "All" BoardName "All" # VideoRam 32768 # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! Option "sw_cursor" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "ATI Radeon" Monitor "Generic|Flat Panel 1400x1050" DefaultColorDepth 16 Subsection "Display" Depth 8 Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection