* [sisyphus] время
@ 2008-11-21 1:08 grey
2008-11-21 7:16 ` Михаил Якушин
0 siblings, 1 reply; 4+ messages in thread
From: grey @ 2008-11-21 1:08 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
После вчерашнего обновления увеличилась скорость времени. Оно начало
убегать примерно на 6 сек в минуту.
Вместе с этим увеличилась скорость проигрывания музыки в Амароке.
И чет я даж незнаю в какую сторону смотреть...
$ uname -r
2.6.27-std-def-alt2
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [sisyphus] время
2008-11-21 1:08 [sisyphus] время grey
@ 2008-11-21 7:16 ` Михаил Якушин
2008-11-21 7:36 ` grey
0 siblings, 1 reply; 4+ messages in thread
From: Михаил Якушин @ 2008-11-21 7:16 UTC (permalink / raw)
To: ALT Linux Sisyphus discussions
grey@ilim.esir.ru wrote:
> После вчерашнего обновления увеличилась скорость времени. Оно начало
> убегать примерно на 6 сек в минуту.
> Вместе с этим увеличилась скорость проигрывания музыки в Амароке.
> И чет я даж незнаю в какую сторону смотреть...
>
> $ uname -r
> 2.6.27-std-def-alt2
Процессор какой?
Ну и dmesg на всякий случай покажите
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [sisyphus] время
2008-11-21 7:16 ` Михаил Якушин
@ 2008-11-21 7:36 ` grey
2008-11-21 8:45 ` grey
0 siblings, 1 reply; 4+ messages in thread
From: grey @ 2008-11-21 7:36 UTC (permalink / raw)
To: ALT Linux Sisyphus discussions
[-- Attachment #1: Type: text/plain, Size: 567 bytes --]
Михаил Якушин пишет:
> grey@ilim.esir.ru wrote:
>> После вчерашнего обновления увеличилась скорость времени. Оно начало
>> убегать примерно на 6 сек в минуту.
>> Вместе с этим увеличилась скорость проигрывания музыки в Амароке.
>> И чет я даж незнаю в какую сторону смотреть...
>>
>> $ uname -r
>> 2.6.27-std-def-alt2
> Процессор какой?
> Ну и dmesg на всякий случай покажите
> _______________________________________________
> Sisyphus mailing list
> Sisyphus@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/sisyphus
Intel Pentium dual-core E2160
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 35784 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-std-def-alt2 (builder@apiary.armor.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt5) (GCC) ) #1 SMP Mon Nov 10 17:47:17 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ce69000 (usable)
BIOS-e820: 000000003ce69000 - 000000003cece000 (ACPI NVS)
BIOS-e820: 000000003cece000 - 000000003e1a3000 (usable)
BIOS-e820: 000000003e1a3000 - 000000003e1a5000 (reserved)
BIOS-e820: 000000003e1a5000 - 000000003e27a000 (usable)
BIOS-e820: 000000003e27a000 - 000000003e2e5000 (ACPI NVS)
BIOS-e820: 000000003e2e5000 - 000000003e2e7000 (usable)
BIOS-e820: 000000003e2e7000 - 000000003e2f2000 (ACPI data)
BIOS-e820: 000000003e2f2000 - 000000003e2f3000 (usable)
BIOS-e820: 000000003e2f3000 - 000000003e2ff000 (ACPI data)
BIOS-e820: 000000003e2ff000 - 000000003e300000 (usable)
BIOS-e820: 000000003e300000 - 000000003f000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
last_pfn = 0x3e300 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 7000-c000
RAMDISK: 00e72000 - 00eff959
DMI 2.4 present.
ACPI: RSDP 000FE020, 0014 (r0 RStyle)
ACPI: RSDT 3E2FD038, 006C (r1 RStyle Proxima 372 1000013)
ACPI: FACP 3E2FC000, 0074 (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: DSDT 3E2F8000, 3D3A (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: FACS 3E287000, 0040
ACPI: APIC 3E2F7000, 0078 (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: WDDT 3E2F6000, 0040 (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: MCFG 3E2F5000, 003C (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: ASF! 3E2F4000, 00A6 (r32 RStyle Proxima 372 MSFT 1000013)
ACPI: SLIC 3E2F3000, 0176 (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: ASPT 3E2F1000, 002C (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: WDTT 3E2F0000, 02CC (r1 RStyle Proxima 372 MSFT 1000013)
ACPI: SSDT 3E2EF000, 0204 (r1 RStyle CpuPm 372 MSFT 1000013)
ACPI: SSDT 3E2EE000, 01F9 (r1 RStyle Cpu0Ist 372 MSFT 1000013)
ACPI: SSDT 3E2ED000, 01F9 (r1 RStyle Cpu1Ist 372 MSFT 1000013)
ACPI: SSDT 3E2EC000, 01F9 (r1 RStyle Cpu2Ist 372 MSFT 1000013)
ACPI: SSDT 3E2EB000, 01F9 (r1 RStyle Cpu3Ist 372 MSFT 1000013)
ACPI: SSDT 3E2EA000, 00DD (r1 RStyle Cpu0Cst 372 MSFT 1000013)
ACPI: SSDT 3E2E9000, 00DD (r1 RStyle Cpu1Cst 372 MSFT 1000013)
ACPI: SSDT 3E2E8000, 00DD (r1 RStyle Cpu2Cst 372 MSFT 1000013)
ACPI: SSDT 3E2E7000, 00DD (r1 RStyle Cpu3Cst 372 MSFT 1000013)
ACPI: TCPA 3E27B000, 0032 (r2 INTEL TIANO 2 MSFT 1000013)
99MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000200000 - 00006bd300] TEXT DATA BSS ==> [0000200000 - 00006bd300]
#4 [0000e72000 - 0000eff959] RAMDISK ==> [0000e72000 - 0000eff959]
#5 [00006be000 - 00006c1000] INIT_PG_TABLE ==> [00006be000 - 00006c1000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00fe5d0] 000fe5d0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003e300
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003ce69
0: 0x0003cece -> 0x0003e1a3
0: 0x0003e1a5 -> 0x0003e27a
0: 0x0003e2e5 -> 0x0003e2e7
0: 0x0003e2f2 -> 0x0003e2f3
0: 0x0003e2ff -> 0x0003e300
On node 0 totalpages: 254390
free_area_init_node: node 0, pgdat c058a380, node_mem_map c1000000
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 223300 pages, LIFO batch:31
HighMem zone: 24888 pages, LIFO batch:7
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID:
MPTABLE: Product ID:
MPTABLE: APIC at: 0xFEE00000
Enabling APIC mode: Flat. Using 0 I/O APICs
BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
Processors: 2
SMP: Allowing 4 CPUs, 2 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3f000000:b1000000)
PERCPU: Allocating 38428 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252151
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=64dfeb36-1556-44da-a461-9d737a4132c5 noapic pci=nomsi panic=30 splash=silent resume=/dev/sda1
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration deviates from PMTIMER: 1567474 1795481.
TSC: Using PIT calibration value
Detected 1567.474 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1001828k/1018880k available (2494k kernel code, 15400k reserved, 1216k data, 404k init, 100444k highmem)
virtual kernel memory layout:
fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05a7000 - 0xc060c000 ( 404 kB)
.data : 0xc046fa50 - 0xc059fd40 (1216 kB)
.text : 0xc0200000 - 0xc046fa50 (2494 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 3134.94 BogoMIPS (lpj=6269896)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0e00)
CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
APIC calibration not consistent with PM Timer: 87ms instead of 100ms
APIC delta adjusted to PM-Timer: 1246865 (1088622)
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3590.99 BogoMIPS (lpj=7181983)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6725.93 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 840 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [50200000, 5027ffff]
PCI: 0000:00:02.0 reg 14 io port: [2460, 2467]
PCI: 0000:00:02.0 reg 18 32bit mmio: [40000000, 4fffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [50100000, 501fffff]
PCI: 0000:00:03.0 reg 10 64bit mmio: [502a5900, 502a590f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:19.0 reg 10 32bit mmio: [50280000, 5029ffff]
PCI: 0000:00:19.0 reg 14 32bit mmio: [502a4000, 502a4fff]
PCI: 0000:00:19.0 reg 18 io port: [20e0, 20ff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [20c0, 20df]
PCI: 0000:00:1a.1 reg 20 io port: [20a0, 20bf]
PCI: 0000:00:1a.2 reg 20 io port: [2080, 209f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [502a5400, 502a57ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [502a0000, 502a3fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [2060, 207f]
PCI: 0000:00:1d.1 reg 20 io port: [2040, 205f]
PCI: 0000:00:1d.2 reg 20 io port: [2020, 203f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [502a5000, 502a53ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [2458, 245f]
PCI: 0000:00:1f.2 reg 14 io port: [2474, 2477]
PCI: 0000:00:1f.2 reg 18 io port: [2450, 2457]
PCI: 0000:00:1f.2 reg 1c io port: [2470, 2473]
PCI: 0000:00:1f.2 reg 20 io port: [2430, 243f]
PCI: 0000:00:1f.2 reg 24 io port: [2420, 242f]
PCI: 0000:00:1f.3 reg 10 64bit mmio: [502a5800, 502a58ff]
PCI: 0000:00:1f.3 reg 20 io port: [2000, 201f]
PCI: 0000:00:1f.5 reg 10 io port: [2448, 244f]
PCI: 0000:00:1f.5 reg 14 io port: [246c, 246f]
PCI: 0000:00:1f.5 reg 18 io port: [2440, 2447]
PCI: 0000:00:1f.5 reg 1c io port: [2468, 246b]
PCI: 0000:00:1f.5 reg 20 io port: [2410, 241f]
PCI: 0000:00:1f.5 reg 24 io port: [2400, 240f]
PCI: 0000:03:00.0 reg 10 io port: [1018, 101f]
PCI: 0000:03:00.0 reg 14 io port: [1024, 1027]
PCI: 0000:03:00.0 reg 18 io port: [1010, 1017]
PCI: 0000:03:00.0 reg 1c io port: [1020, 1023]
PCI: 0000:03:00.0 reg 20 io port: [1000, 100f]
PCI: 0000:03:00.0 reg 24 32bit mmio: [50000000, 500001ff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.2. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [50000000, 500fffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
system 00:01: iomem range 0xc0000-0xdffff could not be reserved
system 00:01: iomem range 0xe0000-0xfffff could not be reserved
system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:06: ioport range 0x500-0x53f has been reserved
system 00:06: ioport range 0x400-0x47f has been reserved
system 00:06: ioport range 0x680-0x6ff has been reserved
PM-Timer running at invalid rate: 87% of normal - aborting.
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x1000-0x1fff
pci 0000:00:1c.2: MEM window: 0x50000000-0x500fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: disabled
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: disabled
pci 0000:00:1c.4: MEM window: disabled
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:1c.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
pci 0000:00:1c.1: PCI INT B -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:1c.1: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1c.2: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [1000, 1fff]
bus: 03 index 1 mmio: [50000000, 500fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [0, 0]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 io port: [0, ffff]
bus: 06 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 566k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1227281100.266:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1762
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 3750k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 41066 bytes
bootsplash: ...found (800x600, 12886 bytes, v3).
Console: switching to colour frame buffer device 97x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel text: 2496k
Write protecting the kernel read-only data: 1020k
Executing init=/init
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
pata_acpi 0000:00:1f.2: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT A disabled
pata_acpi 0000:00:1f.5: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
pata_acpi 0000:00:1f.5: setting latency timer to 64
pata_acpi 0000:00:1f.5: PCI INT A disabled
pata_acpi 0000:03:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
pata_marvell 0000:03:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 10
ata2: DUMMY
Clocksource tsc unstable (delta = 75645599 ns)
ata1.01: ATAPI: ATAPI DVD A DH20A4P, 9P54, max UDMA/66
ata1.01: configured for UDMA/66
scsi 0:0:1:0: CD-ROM ATAPI DVD A DH20A4P 9P54 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x2458 ctl 0x2474 bmdma 0x2430 irq 11
ata4: SATA max UDMA/133 cmd 0x2450 ctl 0x2470 bmdma 0x2438 irq 11
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x2448 ctl 0x246c bmdma 0x2410 irq 11
ata6: SATA max UDMA/133 cmd 0x2440 ctl 0x2468 bmdma 0x2418 irq 11
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
scsi 0:0:1:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input1
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
e1000e 0000:00:19.0: setting latency timer to 64
USB Universal Host Controller Interface driver v3.0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:2b:0c:36
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 10, io base 0x000020c0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Linux agpgart interface v0.103
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 11, io base 0x000020a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Power Button (FF) [PWRF]
Error: Driver 'pcspkr' is already registered, aborting...
Monitor-Mwait will be used to enter C-1 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
agpgart-intel 0000:00:00.0: Intel Q35 Chipset
agpgart-intel 0000:00:00.0: detected 7164K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
uhci_hcd 0000:00:1a.2: PCI INT C -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 9, io base 0x00002080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 9, io mem 0x502a5400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-std-def-alt2 ehci_hcd
usb usb4: SerialNumber: 0000:00:1a.7
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002040
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002020
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-std-def-alt2 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x502a5000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
usb 6-2: configuration #1 chosen from 1 choice
usb 6-2: can't set config #1, error -71
usb 6-2: New USB device found, idVendor=046d, idProduct=c018
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27-std-def-alt2 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
usb 6-2: USB disconnect, address 2
usb 8-1: new high speed USB device using ehci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 8-1: New USB device found, idVendor=05e3, idProduct=070e
usb 8-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 8-1: Product: USB Reader
usb 8-1: Manufacturer: Genesys Logic
usb 8-1: SerialNumber: 00206146
usbcore: registered new interface driver libusual
Adding 1469908k swap on /dev/sda1. Priority:-1 extents:1 across:1469908k
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 6-2: new low speed USB device using uhci_hcd and address 3
EXT3 FS on sda2, internal journal
usb 6-2: configuration #1 chosen from 1 choice
usb 6-2: New USB device found, idVendor=046d, idProduct=c018
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB Optical Mouse
usb 6-2: Manufacturer: Logitech
usb 7-2: new low speed USB device using uhci_hcd and address 2
usb 7-2: configuration #1 chosen from 1 choice
usb 7-2: New USB device found, idVendor=046e, idProduct=52c0
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Multimedia Keyboard
usb 7-2: Manufacturer: BTC
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input4
input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input5
input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.2-2
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input6
input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 6:0:0:0: Direct-Access Genesys CF USB Reader 9317 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Direct-Access Genesys SM USB Reader 9317 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg3 type 0
scsi 6:0:0:2: Direct-Access Genesys SD USB Reader 9317 PQ: 0 ANSI: 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg4 type 0
scsi 6:0:0:3: Direct-Access Genesys MS USB Reader 9317 PQ: 0 ANSI: 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard
KQEMU installed, max_locked_mem=501564kB.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [sisyphus] время
2008-11-21 7:36 ` grey
@ 2008-11-21 8:45 ` grey
0 siblings, 0 replies; 4+ messages in thread
From: grey @ 2008-11-21 8:45 UTC (permalink / raw)
To: ALT Linux Sisyphus discussions
grey@ilim.esir.ru пишет:
> Михаил Якушин пишет:
>> grey@ilim.esir.ru wrote:
>>> После вчерашнего обновления увеличилась скорость времени. Оно начало
>>> убегать примерно на 6 сек в минуту.
>>> Вместе с этим увеличилась скорость проигрывания музыки в Амароке.
>>> И чет я даж незнаю в какую сторону смотреть...
>>>
>>> $ uname -r
>>> 2.6.27-std-def-alt2
>> Процессор какой?
>> Ну и dmesg на всякий случай покажите
>> _______________________________________________
>> Sisyphus mailing list
>> Sisyphus@lists.altlinux.org
>> https://lists.altlinux.org/mailman/listinfo/sisyphus
>
> Intel Pentium dual-core E2160
>
Только что проверил под ядром 2.6.25-std-def-alt10. Всё работает
нормально. Видать что-то в ядре...
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-11-21 8:45 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-11-21 1:08 [sisyphus] время grey
2008-11-21 7:16 ` Михаил Якушин
2008-11-21 7:36 ` grey
2008-11-21 8:45 ` grey
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git