* [sisyphus] Radeon 9500
@ 2003-09-02 3:39 darkelf
2003-09-02 6:15 ` [sisyphus] " Vitaly Ostanin
2003-09-02 8:53 ` [sisyphus] " TaZZ
0 siblings, 2 replies; 10+ messages in thread
From: darkelf @ 2003-09-02 3:39 UTC (permalink / raw)
To: sisyphus
Народ, кто смог заставить быстро работать эту карточку?
Поделитесь, плиз, советами/рецептами/конфигами.
Система - сизиф недельной свежести :)
fglrx работать почему-то отказываются :( Хотя может я чего
неправильно делаю?
^ permalink raw reply [flat|nested] 10+ messages in thread
* [sisyphus] Re: Radeon 9500
2003-09-02 3:39 [sisyphus] Radeon 9500 darkelf
@ 2003-09-02 6:15 ` Vitaly Ostanin
2003-09-02 8:53 ` [sisyphus] " TaZZ
1 sibling, 0 replies; 10+ messages in thread
From: Vitaly Ostanin @ 2003-09-02 6:15 UTC (permalink / raw)
To: darkelf, sisyphus
[-- Attachment #1: Type: text/plain, Size: 550 bytes --]
On Mon, 1 Sep 2003 23:39:49 -0400
darkelf <dark_elf@tut.by> wrote:
> Народ, кто смог заставить быстро работать эту карточку?
> Поделитесь, плиз, советами/рецептами/конфигами.
Текущий вариант с fglrx из Sisyphus работает. У меня, правда,
периодически виснет в 3D, но это похоже на аппаратные проблемы
видяхи.
> Система - сизиф недельной свежести :)
> fglrx работать почему-то отказываются :( Хотя может я чего
> неправильно делаю?
Да, что-то неправильно делаете.
--
Regards, Vyt
mailto: vyt@vzljot.ru
JID: vyt@vzljot.ru
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-02 3:39 [sisyphus] Radeon 9500 darkelf
2003-09-02 6:15 ` [sisyphus] " Vitaly Ostanin
@ 2003-09-02 8:53 ` TaZZ
2003-09-04 20:24 ` darkelf
1 sibling, 1 reply; 10+ messages in thread
From: TaZZ @ 2003-09-02 8:53 UTC (permalink / raw)
To: darkelf, sisyphus
On Mon, Sep 01, 2003 at 11:39:49PM -0400, darkelf wrote:
> Народ, кто смог заставить быстро работать эту карточку?
> Поделитесь, плиз, советами/рецептами/конфигами.
> Система - сизиф недельной свежести :)
> fglrx работать почему-то отказываются :( Хотя может я чего
> неправильно делаю?
Что хоть пишут логи?
Как именно fglrx не работает?
> _______________________________________________
> Sisyphus mailing list
> Sisyphus@altlinux.ru
> http://altlinux.ru/mailman/listinfo/sisyphus
Best regards,
---------TaZZ---------
E-Mail: taw88@mail.ru
ICQ: 201045832
----------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-04 20:24 ` darkelf
@ 2003-09-04 16:29 ` Ivan Adzhubey
2003-09-05 4:18 ` Alexey I. Froloff
0 siblings, 1 reply; 10+ messages in thread
From: Ivan Adzhubey @ 2003-09-04 16:29 UTC (permalink / raw)
To: darkelf, sisyphus
On Thu, 4 Sep 2003 16:24:20 -0400
darkelf <dark_elf@tut.by> wrote:
> (II) fglrx(0): Kernel Module version matches driver.
> (II) fglrx(0): Kernel Module Build Time Information:
> (II) fglrx(0): Build-Kernel UTS_RELEASE:
> 2.4.21rel-std-up-alt13(II) fglrx(0): Build-Kernel MODVERSIONS:
> yes
> (II) fglrx(0): Build-Kernel __SMP__: no
> (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
> (II) fglrx(0): [drm] register handle = 0xfeaf0000
> (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
> (EE) fglrx(0): cannot init AGP
>
> *** If unresolved symbols were reported above, they might not
> *** be the reason for the server aborting.
>
> Fatal server error:
> Caught signal 11. Server aborting
Чипсет на материнке какой? Ядро не распознает интерфейс AGP и встроенный
в fglrx модуль AGPGART не знает как его проинициализировать. У меня то
же самое происходит на ASUS P4C800 (i875). Не знают ядра ветки 2.4.x
этого чипсета. Жди ядра 2.6.x, там он supported. Можно попытаться
поиграться с agp_try_unsupported, но мне не помогло. Если хочешь
все-таки хоть как-то завести иксы именно с fglrx, то добавь в
XF86Config-4, в секцию Device:
Section "Device"
Option "no_dri" "yes"
EndSection
Но тогда никакого 3D ускорения не будет естественно.
--
Иван
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-02 8:53 ` [sisyphus] " TaZZ
@ 2003-09-04 20:24 ` darkelf
2003-09-04 16:29 ` Ivan Adzhubey
0 siblings, 1 reply; 10+ messages in thread
From: darkelf @ 2003-09-04 20:24 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 826 bytes --]
В сообщении от Вторник 02 Сентябрь 2003 04:53 TaZZ написал(a):
> On Mon, Sep 01, 2003 at 11:39:49PM -0400, darkelf wrote:
> > Народ, кто смог заставить быстро работать эту карточку?
> > Поделитесь, плиз, советами/рецептами/конфигами.
> > Система - сизиф недельной свежести :)
> > fglrx работать почему-то отказываются :( Хотя может я чего
> > неправильно делаю?
>
> Что хоть пишут логи?
> Как именно fglrx не работает?
>
> > _______________________________________________
> > Sisyphus mailing list
> > Sisyphus@altlinux.ru
> > http://altlinux.ru/mailman/listinfo/sisyphus
>
> Best regards,
> ---------TaZZ---------
> E-Mail: taw88@mail.ru
> ICQ: 201045832
> ----------------------
> _______________________________________________
> Sisyphus mailing list
> Sisyphus@altlinux.ru
> http://altlinux.ru/mailman/listinfo/sisyphus
[-- Attachment #2: XF86Config-4 --]
[-- Type: text/plain, Size: 6276 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:rctrl_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-80
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 55-85
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Radeon R300"
VendorName "Unknown"
BoardName "Unknown"
Driver "fglrx"
# VideoRam 131072
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Radeon R300"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
[-- Attachment #3: XFree86.0.log --]
[-- Type: text/x-log, Size: 26768 bytes --]
XFree86 Version 4.3.0 (ALT Linux build: 4.3.0-alt1)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21rel-std-smp-alt7 i686 [ELF]
Build Date: 13 August 2003
Build Host: skif.office.altlinux.ru
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.21rel-std-up-alt13 (nidd@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 Fri Aug 15 19:07:12 MSD 2003 P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 3 09:52:41 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "ATI Radeon R300"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us,ru"
(**) XKB: layout: "us,ru"
(**) Option "XkbVariant" ",winkeys"
(**) XKB: variant: ",winkeys"
(**) Option "XkbOptions" "grp:rctrl_toggle"
(**) XKB: options: "grp:rctrl_toggle"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80f2 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,24d1 card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4144 card 174b,7c07 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4164 card 174b,7c06 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0a:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 02:0a:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xcff00000 - 0xefefffff (0x20000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 AD [Radeon 9500 Pro] rev 0, Mem @ 0xe0000000/27, 0xfeaf0000/16, I/O @ 0xc000/8, BIOS @ 0xfeac0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4164) rev 0, Mem @ 0xd8000000/27, 0xfeae0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[1] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[2] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[3] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[4] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[5] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[8] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[12] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[13] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[14] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[1] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[2] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[3] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[4] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[5] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[8] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[12] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[13] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[14] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[6] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[15] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[16] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 2.9.12
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500),
ATI R300 AE (R9500), ATI R300 AF (R9500),
ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO),
ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX),
ATI R300 NG (Fire GL X1), ATI R350 AK (Fire GL unknown),
ATI R350 NH (R9800), ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI R300 AD (R9500) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[6] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[15] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[16] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x08201b50
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[6] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[7] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[18] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[19] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[20] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI R300 AD (R9500)" (Chipset = 0x4144)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c07)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfeaf0000
(--) fglrx(0): ROM-BIOS at 0xfeac0000
(--) fglrx(0): ChipRevID = 0x02
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(EE) fglrx(0): board is third party board
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 3
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- TMDS
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Primary head ----------------
(II) fglrx(0): Manufacturer: NEC Model: 65e9 Serial#: 7645
(II) fglrx(0): Year: 2003 Week: 16
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 29
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.633 redY: 0.340 greenX: 0.295 greenY: 0.600
(II) fglrx(0): blueX: 0.141 blueY: 0.096 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 359 x 287 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 55 V max: 85 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: NEC LCD1860NX
(II) fglrx(0): Serial No: 34107645YB
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(==) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=27000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(II) fglrx(0): Panel size found from DDC: 1280x1024
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(--) fglrx(0): Display dimensions: (360, 290) mm
(--) fglrx(0): DPI set to (90, 89)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 2.9.12
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x000009d8
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfebff800 - 0xfebffbff (0x400) MX[B]
[8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[9] -1 0 0xfeae0000 - 0xfeaeffff (0x10000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[11] -1 0 0xfeac0000 - 0xfeadffff (0x20000) MX[B](B)
[12] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B)
[13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
[21] -1 0 0x0000df80 - 0x0000df9f (0x20) IX[B]
[22] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[23] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[B]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]
[28] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(II) fglrx(0): UMM area: 0xe0700000 (size=0x07900000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe158a000
(II) fglrx(0): [drm] mapped SAREA 0xe158a000 to 0x122000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 2.9.12
(II) fglrx(0): Date: May 9 2003
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.21rel-std-up-alt13
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xfeaf0000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@packages.altlinux.org.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-04 16:29 ` Ivan Adzhubey
@ 2003-09-05 4:18 ` Alexey I. Froloff
2003-09-05 15:27 ` Ivan Adzhubey
0 siblings, 1 reply; 10+ messages in thread
From: Alexey I. Froloff @ 2003-09-05 4:18 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 930 bytes --]
* Ivan Adzhubey <iadzhubey@rics.bwh.harvard.edu> [030904 20:31]:
> Чипсет на материнке какой? Ядро не распознает интерфейс AGP и встроенный
> в fglrx модуль AGPGART не знает как его проинициализировать. У меня то
> же самое происходит на ASUS P4C800 (i875). Не знают ядра ветки 2.4.x
> этого чипсета.
Можно грузить agpgart с опцией agp_try_unsupported=1 (или что-то
в этом роде - в dmesg точно написано), тогда модуль загружается.
Но есть ещё одна хитрость - на P4C800 AGP Pro/8x/4x, поэтому в
XF86Config-4 надо выставить Option AGPчто-то 4, тогда начинает
работать dri. С дефолтными настройками (без указания этой опции)
выставляется AGP 1x и драйвер не может проинитить agpgart.
Проверить можно через glxinfo - режим AGP пишется в Version
String.
P.S. Пишу по памяти - все настройки дома.
--
Regards, Sir Raorn.
-------------------
Грамотное и безопасное программирование как-то плохо сочетается
с C/C++.
-- vsl in devel@
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-05 4:18 ` Alexey I. Froloff
@ 2003-09-05 15:27 ` Ivan Adzhubey
2003-09-08 4:42 ` Alexey I. Froloff
2003-09-10 10:18 ` Anton Farygin
0 siblings, 2 replies; 10+ messages in thread
From: Ivan Adzhubey @ 2003-09-05 15:27 UTC (permalink / raw)
To: sisyphus
On Fri, 5 Sep 2003 08:18:54 +0400
"Alexey I. Froloff" <raorn@immo.ru> wrote:
> * Ivan Adzhubey <iadzhubey@rics.bwh.harvard.edu> [030904 20:31]:
> > Чипсет на материнке какой? Ядро не распознает интерфейс AGP и
> > встроенный в fglrx модуль AGPGART не знает как его
> > проинициализировать. У меня то же самое происходит на ASUS P4C800
> > (i875). Не знают ядра ветки 2.4.x этого чипсета.
> Можно грузить agpgart с опцией agp_try_unsupported=1 (или что-то
> в этом роде - в dmesg точно написано), тогда модуль загружается.
Внешний agpgart или встроенный в fglrx? Встроеный по-моему вообще эту
опцию не парсит, а внешний мне задействовать в связке с fglrx не
удалось, хотя опцию для отключкния встроенного я нашел.
> Но есть ещё одна хитрость - на P4C800 AGP Pro/8x/4x, поэтому в
> XF86Config-4 надо выставить Option AGPчто-то 4, тогда начинает
> работать dri. С дефолтными настройками (без указания этой опции)
> выставляется AGP 1x и драйвер не может проинитить agpgart.
Пробовал все режимы AGP -- плевало оно на них. Все одно не работает.
> Проверить можно через glxinfo - режим AGP пишется в Version
> String.
>
> P.S. Пишу по памяти - все настройки дома.
То есть вы хотите сказать что у вас работает AGP на ASUS P4C800 с ядром
2.4.x??? Но это же сенсация :). Конфиги в студию пожалуйста.
--
Иван
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-05 15:27 ` Ivan Adzhubey
@ 2003-09-08 4:42 ` Alexey I. Froloff
2003-09-10 10:18 ` Anton Farygin
1 sibling, 0 replies; 10+ messages in thread
From: Alexey I. Froloff @ 2003-09-08 4:42 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 1241 bytes --]
* Ivan Adzhubey <iadzhubey@rics.bwh.harvard.edu> [030905 19:28]:
> > > Чипсет на материнке какой? Ядро не распознает интерфейс AGP и
> > > встроенный в fglrx модуль AGPGART не знает как его
> > > проинициализировать. У меня то же самое происходит на ASUS P4C800
> > > (i875). Не знают ядра ветки 2.4.x этого чипсета.
> > Можно грузить agpgart с опцией agp_try_unsupported=1 (или что-то
> > в этом роде - в dmesg точно написано), тогда модуль загружается.
> Внешний agpgart или встроенный в fglrx? Встроеный по-моему вообще эту
> опцию не парсит, а внешний мне задействовать в связке с fglrx не
> удалось, хотя опцию для отключкния встроенного я нашел.
agpgart ядрёный из 2.4.21...
> > P.S. Пишу по памяти - все настройки дома.
> То есть вы хотите сказать что у вас работает AGP на ASUS P4C800 с ядром
> 2.4.x??? Но это же сенсация :). Конфиги в студию пожалуйста.
Боюсь, что я невнимательно прочитал Subject ;-) У меня Radeon
7500 с родными XFree'шными дровами. Из конфигов только
agp_try_unsupported=1 и Option AGPMode 4.
--
Regards, Sir Raorn.
-------------------
Возможно, вы уже успели заметить, что после обновления пакета app-defaults
до версии 0.2.6-alt1 в системе что-то стало работать не так, как положено.
-- ldv in sisyphus@
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sisyphus] Radeon 9500
2003-09-05 15:27 ` Ivan Adzhubey
2003-09-08 4:42 ` Alexey I. Froloff
@ 2003-09-10 10:18 ` Anton Farygin
2003-09-10 10:47 ` [sisyphus] " Vitaly Ostanin
1 sibling, 1 reply; 10+ messages in thread
From: Anton Farygin @ 2003-09-10 10:18 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 1516 bytes --]
Ivan Adzhubey пишет:
> On Fri, 5 Sep 2003 08:18:54 +0400
> "Alexey I. Froloff" <raorn@immo.ru> wrote:
>
>
>>* Ivan Adzhubey <iadzhubey@rics.bwh.harvard.edu> [030904 20:31]:
>>
>>>Чипсет на материнке какой? Ядро не распознает интерфейс AGP и
>>>встроенный в fglrx модуль AGPGART не знает как его
>>>проинициализировать. У меня то же самое происходит на ASUS P4C800
>>>(i875). Не знают ядра ветки 2.4.x этого чипсета.
>>
>>Можно грузить agpgart с опцией agp_try_unsupported=1 (или что-то
>>в этом роде - в dmesg точно написано), тогда модуль загружается.
>
>
> Внешний agpgart или встроенный в fglrx? Встроеный по-моему вообще эту
> опцию не парсит, а внешний мне задействовать в связке с fglrx не
> удалось, хотя опцию для отключкния встроенного я нашел.
>
>
>>Но есть ещё одна хитрость - на P4C800 AGP Pro/8x/4x, поэтому в
>>XF86Config-4 надо выставить Option AGPчто-то 4, тогда начинает
>>работать dri. С дефолтными настройками (без указания этой опции)
>>выставляется AGP 1x и драйвер не может проинитить agpgart.
>
>
> Пробовал все режимы AGP -- плевало оно на них. Все одно не работает.
>
>
>>Проверить можно через glxinfo - режим AGP пишется в Version
>>String.
>>
>>P.S. Пишу по памяти - все настройки дома.
>
>
> То есть вы хотите сказать что у вас работает AGP на ASUS P4C800 с ядром
> 2.4.x??? Но это же сенсация :). Конфиги в студию пожалуйста.
>
Кстати, проверьте на 2.4.22 и fglrx-3.2.5 (вчера ушел в Sisyphus).
На нем вроде как заработать должен agp3 (8x), но не факт... ;-)
Rgds,
Rider
[-- Attachment #2: Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [sisyphus] Re: Radeon 9500
2003-09-10 10:18 ` Anton Farygin
@ 2003-09-10 10:47 ` Vitaly Ostanin
0 siblings, 0 replies; 10+ messages in thread
From: Vitaly Ostanin @ 2003-09-10 10:47 UTC (permalink / raw)
To: sisyphus
[-- Attachment #1: Type: text/plain, Size: 532 bytes --]
On Wed, 10 Sep 2003 14:18:44 +0400
Anton Farygin <rider@altlinux.com> wrote:
<skipped/>
> > То есть вы хотите сказать что у вас работает AGP на ASUS
> > P4C800 с ядром 2.4.x??? Но это же сенсация :). Конфиги в
> > студию пожалуйста.
> >
>
> Кстати, проверьте на 2.4.22 и fglrx-3.2.5 (вчера ушел в
> Sisyphus).
>
> На нем вроде как заработать должен agp3 (8x), но не факт... ;-)
О! Хочу :) Как проверить? У меня Radeon 9000 pro
<skipped/>
--
Regards, Vyt
mailto: vyt@vzljot.ru
JID: vyt@vzljot.ru
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2003-09-10 10:47 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-02 3:39 [sisyphus] Radeon 9500 darkelf
2003-09-02 6:15 ` [sisyphus] " Vitaly Ostanin
2003-09-02 8:53 ` [sisyphus] " TaZZ
2003-09-04 20:24 ` darkelf
2003-09-04 16:29 ` Ivan Adzhubey
2003-09-05 4:18 ` Alexey I. Froloff
2003-09-05 15:27 ` Ivan Adzhubey
2003-09-08 4:42 ` Alexey I. Froloff
2003-09-10 10:18 ` Anton Farygin
2003-09-10 10:47 ` [sisyphus] " Vitaly Ostanin
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git