From: "Girar awaiter (cas)" <girar-builder@altlinux.org>
To: Andrey Cherepanov <cas@altlinux.org>
Cc: sisyphus-incominger@lists.altlinux.org,
girar-builder-sisyphus@altlinux.org
Subject: [#294771] FAILED (try 2) opencascade.git=7.6.1-alt1 freecad.git=0.19.3-alt1 gmsh.git=4.6.0-alt3.1 ...
Date: Sat, 5 Feb 2022 07:20:05 +0000
Message-ID: <girar.task.294771.2.1@gyle.mskdc.altlinux.org> (raw)
In-Reply-To: <girar.task.294771.1.1@gyle.mskdc.altlinux.org>
https://git.altlinux.org/tasks/294771/logs/events.2.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#200 freecad failed failed failed failed failed
2022-Feb-05 06:59:15 :: task #294771 for sisyphus resumed by cas:
2022-Feb-05 06:59:15 :: message: opencascade-7.6.1
#100 build 7.6.1-alt1 from /people/cas/packages/opencascade.git fetched at 2022-Feb-05 06:23:04
#200 build 0.19.3-alt1 from /gears/f/freecad.git fetched at 2022-Feb-05 06:58:21 from sisyphus
#300 build 4.6.0-alt3.1 from /gears/g/gmsh.git fetched at 2022-Feb-05 06:58:23 from sisyphus
#400 build 1.1.1-alt2 from /gears/h/horizon.git fetched at 2022-Feb-05 06:58:24 from sisyphus
#500 build 6.0.0-alt2.1 from /gears/k/kicad.git fetched at 2022-Feb-05 06:58:27 from sisyphus
#600 build 6.2.2104-alt2 from /gears/n/netgen.git fetched at 2022-Feb-05 06:58:28 from sisyphus
#700 build 9.7.0.1-alt1 from /gears/s/smesh.git fetched at 2022-Feb-05 06:58:31 from sisyphus
2022-Feb-05 06:59:15 :: created build repo
2022-Feb-05 06:59:16 :: [ppc64le] #100 opencascade.git 7.6.1-alt1: build start
2022-Feb-05 06:59:16 :: [armh] #100 opencascade.git 7.6.1-alt1: build start
2022-Feb-05 06:59:16 :: [aarch64] #100 opencascade.git 7.6.1-alt1: build start
2022-Feb-05 06:59:16 :: [x86_64] #100 opencascade.git 7.6.1-alt1: build start
2022-Feb-05 06:59:16 :: [i586] #100 opencascade.git 7.6.1-alt1: build start
2022-Feb-05 06:59:31 :: [i586] #100 opencascade.git 7.6.1-alt1: build OK (cached)
2022-Feb-05 06:59:31 :: [i586] #200 freecad.git 0.19.3-alt1: build start
2022-Feb-05 06:59:31 :: [x86_64] #100 opencascade.git 7.6.1-alt1: build OK (cached)
2022-Feb-05 06:59:31 :: [x86_64] #200 freecad.git 0.19.3-alt1: build start
2022-Feb-05 06:59:44 :: [aarch64] #100 opencascade.git 7.6.1-alt1: build OK (cached)
2022-Feb-05 06:59:44 :: [aarch64] #200 freecad.git 0.19.3-alt1: build start
2022-Feb-05 06:59:51 :: [ppc64le] #100 opencascade.git 7.6.1-alt1: build OK (cached)
2022-Feb-05 06:59:51 :: [ppc64le] #200 freecad.git 0.19.3-alt1: build start
2022-Feb-05 06:59:56 :: [armh] #100 opencascade.git 7.6.1-alt1: build OK (cached)
2022-Feb-05 06:59:56 :: [armh] #200 freecad.git 0.19.3-alt1: build start
[x86_64] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Selection.cpp.o
[x86_64] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] [ 55%] Linking CXX shared library ../../lib/libFreeCADGui.so
[x86_64] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] make[1]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] [ 56%] Built target FreeCADGui
[x86_64] make[1]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[x86_64] make: *** [Makefile:136: all] Error 2
2022-Feb-05 07:06:20 :: [x86_64] freecad.git 0.19.3-alt1: remote: build failed
2022-Feb-05 07:06:20 :: [x86_64] #200 freecad.git 0.19.3-alt1: build FAILED
2022-Feb-05 07:06:20 :: [x86_64] requesting cancellation of task processing
[i586] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionFilter.cpp.o
[i586] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] [ 55%] Linking CXX shared library ../../lib/libFreeCADGui.so
[i586] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] make[1]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] [ 56%] Built target FreeCADGui
[i586] make[1]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[i586] make: *** [Makefile:136: all] Error 2
2022-Feb-05 07:07:06 :: [i586] freecad.git 0.19.3-alt1: remote: build failed
2022-Feb-05 07:07:06 :: [i586] #200 freecad.git 0.19.3-alt1: build FAILED
[ppc64le] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/SelectionFilter.cpp.o
[ppc64le] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] [ 55%] Linking CXX shared library ../../lib/libFreeCADGui.so
[ppc64le] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] make[1]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] [ 56%] Built target FreeCADGui
[ppc64le] make[1]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[ppc64le] make: *** [Makefile:136: all] Error 2
2022-Feb-05 07:12:48 :: [ppc64le] freecad.git 0.19.3-alt1: remote: build failed
2022-Feb-05 07:12:48 :: [ppc64le] #200 freecad.git 0.19.3-alt1: build FAILED
[aarch64] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] [ 55%] Building CXX object src/Gui/CMakeFiles/FreeCADGui.dir/Selection.cpp.o
[aarch64] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] make[2]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] [ 55%] Linking CXX shared library ../../lib/libFreeCADGui.so
[aarch64] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] make[1]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] [ 56%] Built target FreeCADGui
[aarch64] make[1]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[aarch64] make: *** [Makefile:136: all] Error 2
2022-Feb-05 07:13:16 :: [aarch64] freecad.git 0.19.3-alt1: remote: build failed
2022-Feb-05 07:13:16 :: [aarch64] #200 freecad.git 0.19.3-alt1: build FAILED
[armh] /usr/src/RPM/BUILD/freecad-0.19.3/src/Gui/View3DInventorViewer.cpp: In member function 'projectOnFarPlane':
[armh] /usr/src/RPM/BUILD/freecad-0.19.3/src/Gui/View3DInventorViewer.cpp:2739: warning: '<anonymous>' may be used uninitialized [-Wmaybe-uninitialized]
[armh] 2739 | if (!cam) return SbVec3f(); // return invalid point
[armh] /usr/src/RPM/BUILD/freecad-0.19.3/src/Gui/View3DInventorViewer.cpp:2739: note: '<anonymous>' declared here
[armh] 2739 | if (!cam) return SbVec3f(); // return invalid point
[armh] make[2]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[armh] make[1]: Entering directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[armh] [ 56%] Built target FreeCADGui
[armh] make[1]: Leaving directory '/usr/src/RPM/BUILD/freecad-0.19.3'
[armh] make: *** [Makefile:136: all] Error 2
2022-Feb-05 07:20:05 :: [armh] freecad.git 0.19.3-alt1: remote: build failed
2022-Feb-05 07:20:05 :: [armh] #200 freecad.git 0.19.3-alt1: build FAILED
2022-Feb-05 07:06:20 :: [x86_64] build FAILED
2022-Feb-05 07:07:06 :: [i586] build FAILED
2022-Feb-05 07:12:48 :: [ppc64le] build FAILED
2022-Feb-05 07:13:16 :: [aarch64] build FAILED
2022-Feb-05 07:20:05 :: [armh] build FAILED
2022-Feb-05 07:20:05 :: task #294771 for sisyphus FAILED
next prev parent reply other threads:[~2022-02-05 7:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-05 6:49 [#294771] [test-only] FAILED opencascade.git=7.6.1-alt1 Girar awaiter (cas)
2022-02-05 7:20 ` Girar awaiter (cas) [this message]
2022-02-05 16:55 ` [#294771] FAILED (try 3) opencascade.git=7.6.1-alt1 gmsh.git=4.6.0-alt3.1 horizon.git=1.1.1-alt2 Girar awaiter (cas)
2022-03-21 15:19 ` [#294771] FAILED (try 4) opencascade.git=7.6.1-alt1 gmsh.git=4.9.5-alt1 horizon.git=1.1.1-alt2 Girar awaiter (cas)
2022-04-15 13:54 ` [#294771] FAILED (try 5) opencascade.git=7.6.1-alt1 horizon.git=1.1.1-alt2 kicad.git=6.0.2-alt1 Girar awaiter (cas)
2022-04-15 14:59 ` [#294771] FAILED (try 6) opencascade.git=7.6.1-alt1 horizon.git=2.2.0-alt1 kicad.git=6.0.2-alt1 Girar awaiter (cas)
2022-04-19 9:43 ` [#294771] FAILED (try 7) " Girar awaiter (cas)
2022-04-19 13:15 ` [#294771] FAILED (try 8) " Girar awaiter (cas)
2022-04-20 16:01 ` [#294771] FAILED (try 9) " Girar awaiter (cas)
2022-04-25 10:04 ` [#294771] FAILED (try 10) " Girar awaiter (cas)
2022-04-25 10:45 ` [#294771] FAILED (try 11) " Girar awaiter (cas)
2022-04-25 11:18 ` [#294771] FAILED (try 12) " Girar awaiter (cas)
2022-04-30 5:25 ` [#294771] FAILED (try 13) " Girar awaiter (cas)
2022-05-01 17:36 ` [#294771] FAILED (try 14) opencascade.git=7.6.2-alt1 " Girar awaiter (cas)
2022-07-10 18:17 ` [#294771] [test-only] FAILED (try 15) opencascade.git=7.6.2-alt1 horizon.git=2.2.0-alt1 kicad.git=6.0.6-alt1 Girar awaiter (cas)
2022-07-12 10:45 ` [#294771] [test-only] FAILED (try 16) " Girar awaiter (cas)
2022-07-12 11:42 ` [#294771] [test-only] FAILED (try 17) " Girar awaiter (cas)
2022-07-16 12:48 ` [#294771] [test-only] FAILED (try 18) " Girar awaiter (cas)
2022-07-18 7:37 ` [#294771] [test-only] FAILED (try 19) " Girar awaiter (cas)
2022-07-19 16:36 ` [#294771] [test-only] FAILED (try 20) " Girar awaiter (cas)
2022-07-20 4:58 ` [#294771] [test-only] FAILED (try 21) " Girar awaiter (cas)
2022-07-23 2:43 ` [#294771] FAILED (try 22) " Girar awaiter (cas)
2022-07-23 5:25 ` [#294771] FAILED (try 23) " Girar awaiter (cas)
2022-07-23 6:56 ` [#294771] FAILED (try 24) opencascade.git=7.6.2-alt1 horizon.git=2.2.0-alt1 Girar awaiter (cas)
2022-07-23 9:25 ` [#294771] [test-only] FAILED (try 25) " Girar awaiter (cas)
2022-07-23 10:33 ` [#294771] [test-only] FAILED (try 26) " Girar awaiter (cas)
2022-07-23 12:14 ` [#294771] [test-only] FAILED (try 27) " Girar awaiter (cas)
2022-07-23 13:46 ` [#294771] [test-only] FAILED (try 28) " Girar awaiter (cas)
2022-07-24 6:51 ` [#294771] TESTED (try 29) " Girar awaiter (cas)
2022-07-24 12:37 ` [#294771] DONE (try 30) " Girar pender (cas)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=girar.task.294771.2.1@gyle.mskdc.altlinux.org \
--to=girar-builder@altlinux.org \
--cc=cas@altlinux.org \
--cc=devel@lists.altlinux.org \
--cc=girar-builder-sisyphus@altlinux.org \
--cc=sisyphus-incominger@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Girar Builder robot reports
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-incominger/0 sisyphus-incominger/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-incominger sisyphus-incominger/ http://lore.altlinux.org/sisyphus-incominger \
sisyphus-incominger@lists.altlinux.org sisyphus-incominger@lists.altlinux.ru sisyphus-incominger@lists.altlinux.com
public-inbox-index sisyphus-incominger
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-incominger
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git