* [cyber] I: Sisyphus-20230304 i586 beehive_status: +15 -17 (76)
@ 2023-03-04 7:22 ALT beekeeper
0 siblings, 0 replies; only message in thread
From: ALT beekeeper @ 2023-03-04 7:22 UTC (permalink / raw)
To: sisyphus-cybertalk
15 NEW error logs
automake_1.11-1.11.6-alt9
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
--
+ exit 77
1 of 878 tests failed
(73 tests were not run)
canl-java-2.7.0-alt1_5jpp11
Result (full) : FAILED The following validation errors were found:
error at position 1 in chain, problematic certificate subject: CN=proxy,CN=trusted
client,OU=Relaxation,O=Utopia,L=Tropic,C=UG (category: X509_BASIC): Certificate has
expired on: 12/15/10, 5:37 PM
Test Case: trusted-certs/trusted_client.proxy_exp.proxy_exp.grid_proxy
Result (short): FAILED: Certificate has expired on: 12/15/10, 5:37 PM
Result (full) : FAILED The following validation errors were found:
error at position 1 in chain, problematic certificate subject: CN=proxy,CN=trusted
client,OU=Relaxation,O=Utopia,L=Tropic,C=UG (category: X509_BASIC): Certificate has
expired on: 12/15/10, 5:37 PM
--
Test Case: trusted-certs/trusted_client.proxy.proxy_exp.grid_proxy
Result (short): FAILED: Certificate has expired on: 12/15/10, 5:37 PM
Result (full) : FAILED The following validation errors were found:
error at position 0 in chain, problematic certificate subject: CN=proxy,CN=proxy,CN=trusted
client,OU=Relaxation,O=Utopia,L=Tropic,C=UG (category: X509_BASIC): Certificate has
expired on: 12/15/10, 5:37 PM
--
Test Case: subsubca-certs/subsubca_clientbaddn.proxy.grid_proxy
Result (short): FAILED: The certificate subject CN=subsubca client with
bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG is not accepted by any rule of
the the relevant namespace policies. Policies which matches the issuer are:
src/test/resources/glite-utiljava/grid-security/certificates-withoutCrl//84d6f82e.namespaces:1
Result (full) : FAILED The following validation errors were found:
error at position 1 in chain, problematic certificate subject: CN=subsubca client with
bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG (category: NAMESPACE): The certificate subject
CN=subsubca client with bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG is not accepted by
any rule of the the relevant namespace policies. Policies which matches the issuer are:
src/test/resources/glite-utiljava/grid-security/certificates-withoutCrl//84d6f82e.namespaces:1
Test Case: subsubca-certs/subsubca_clientbaddn.proxy.proxy.grid_proxy
Result (short): FAILED: The certificate subject CN=subsubca client with
bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG is not accepted by any rule of
the the relevant namespace policies. Policies which matches the issuer are:
src/test/resources/glite-utiljava/grid-security/certificates-withoutCrl//84d6f82e.namespaces:1
Result (full) : FAILED The following validation errors were found:
error at position 2 in chain, problematic certificate subject: CN=subsubca client with
bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG (category: NAMESPACE): The certificate subject
CN=subsubca client with bad DN,OU=Chilling,O=Utopia,L=Tropic,C=UG is not accepted by
any rule of the the relevant namespace policies. Policies which matches the issuer are:
src/test/resources/glite-utiljava/grid-security/certificates-withoutCrl//84d6f82e.namespaces:1
--
Test Case: trusted-certs/trusted_client
Result (short): FAILED: No valid CRL was found for the CA which issued the chain Cause:
No CRLs found for issuer "cn=the trusted CA,ou=Relaxation,o=Utopia,l=Tropic,c=UG"
Result (full) : FAILED The following validation errors were found:
cura-1:4.13.0-alt2
import importlib_metadata as metadata # type: ignore
E ModuleNotFoundError: No module named 'importlib_metadata'
ensmallen-2.17.0-alt1_1
+ '[' a134 == a ']'
+ for i in `seq 1 5`
+ code=
+ ./ensmallen_tests --rng-seed=time '~SmallLovaszThetaSdp' '~BBSBBLogisticRegressionTest'
^[[1;2;31mflexiblas Failed to load the BLAS fallback library. Abort!
^[[0m/usr/src/tmp/rpm-tmp.59137: line 135: 796370 Aborted ./ensmallen_tests
--rng-seed=time ~SmallLovaszThetaSdp ~BBSBBLogisticRegressionTest
+ code=134
+ '[' a134 == a ']'
+ '[' 0 -eq 0 ']'
+ false
ffmpeg-plugin-browser-106-alt1
gcc -I. -I./ -D_ISOC99_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-D_POSIX_C_SOURCE=200112 -D_XOPEN_SOURCE=600 -DPIC -DZLIB_CONST -DHAVE_AV_CONFIG_H
-DBUILDING_avutil -pipe -frecord-gcc-switches -Wall -g -march=i586 -mtune=generic
-DRUNTIME_CPUDETECT -std=c11 -fomit-frame-pointer -fPIC -pthread
-I/usr/include/lilv-0 -I/usr/include/sratom-0 -I/usr/include/sord-0
-I/usr/include/serd-0 -I/usr/include/fribidi -I/usr/include/freetype2
-I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/freetype2
-I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/bs2b -I/usr/include/libdrm
-I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2
-I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/fribidi -I/usr/include/openjpeg-2.5
-I/usr/include/opus -I/usr/include/opus -D_REENTRANT -pthread -I/usr/include/librsvg-2.0
-I/usr/include/gdk-pixbuf-2.0 -I/usr/include/cairo -I/usr/include/freetype2
-I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
-I/usr/include/libpng16 -I/usr/include/webp -I/usr/include/webp
-DX264_API_IMPORTS -I/usr/include/libxml2 -I/usr/include/cdio/paranoia
-I/usr/include/libdrm -g -Wdeclaration-after-statement -Wall -Wdisabled-optimization
-Wpointer-arith -Wredundant-decls -Wwrite-strings -Wtype-limits -Wundef
-Wmissing-prototypes -Wstrict-prototypes -Wempty-body -Wno-parentheses -Wno-switch
-Wno-format-zero-length -Wno-pointer-sign -Wno-unused-const-variable -Wno-bool-operation
-Wno-char-subscripts -O3 -fno-math-errno -fno-signed-zeros -fno-tree-vectorize
-Werror=format-security -Werror=implicit-function-declaration -Werror=missing-prototypes
-Werror=return-type -Werror=vla -Wformat -fdiagnostics-color=auto -Wno-maybe-uninitialized
-D_REENTRANT -I/usr/include/SDL2 -MMD -MF libavutil/hwcontext_vulkan.d
-MT libavutil/hwcontext_vulkan.o -c -o libavutil/hwcontext_vulkan.o
libavutil/hwcontext_vulkan.c
libavutil/hwcontext_vulkan.c:363:7: error: 'VK_EXT_VIDEO_DECODE_H264_EXTENSION_NAME'
undeclared here (not in a function); did you mean
'VK_EXT_VIDEO_ENCODE_H264_EXTENSION_NAME'?
363 | { VK_EXT_VIDEO_DECODE_H264_EXTENSION_NAME, FF_VK_EXT_NO_FLAG
},
| VK_EXT_VIDEO_ENCODE_H264_EXTENSION_NAME
libavutil/hwcontext_vulkan.c:364:7: error: 'VK_EXT_VIDEO_DECODE_H265_EXTENSION_NAME'
undeclared here (not in a function); did you mean
'VK_EXT_VIDEO_ENCODE_H265_EXTENSION_NAME'?
364 | { VK_EXT_VIDEO_DECODE_H265_EXTENSION_NAME, FF_VK_EXT_NO_FLAG
},
glibc-6:2.35.0.6.491f2e-alt2
UNSUPPORTED: misc/tst-clock_adjtime-time64
FAIL: misc/tst-epoll
UNSUPPORTED: misc/tst-ntp_adjtime
--
+ xargs -i head -v -n -0 'build-i586-linux/{}.test-result' 'build-i586-linux/{}.out'
+ grep '^FAIL:' build-i586-linux/tests.sum
==> build-i586-linux/misc/tst-epoll.test-result <==
FAIL: misc/tst-epoll
original exit status 1
nagstamon-3.5.0-alt3.rc1
import importlib_metadata as metadata # type: ignore
ModuleNotFoundError: No module named 'importlib_metadata'
perl-MooseX-AuthorizedMethods-0.006-alt1.1
Can't locate Sub/Name.pm in @INC (you may need to install the Sub::Name module)
(@INC contains: /usr/src/RPM/BUILD/MooseX-AuthorizedMethods-0.006/inc
/usr/src/RPM/BUILD/MooseX-AuthorizedMethods-0.006/blib/lib
/usr/src/RPM/BUILD/MooseX-AuthorizedMethods-0.006/blib/arch
/usr/local/lib/perl/5.34 /usr/local/share/perl/5.34 /usr/lib/perl5 /usr/share/perl5
/usr/lib/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/MooseX-AuthorizedMethods-0.006/blib/lib/MooseX/AuthorizedMethods.pm
line 5.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/MooseX-AuthorizedMethods-0.006/blib/lib/MooseX/AuthorizedMethods.pm
line 5.
Compilation failed in require at t/syntax-sugar.t line 17.
BEGIN failed--compilation aborted at t/syntax-sugar.t line 17.
t/syntax-sugar.t .......
--
Result: FAIL
Failed 1/4 test programs. 0/13 subtests failed.
make: *** [Makefile:785: test_dynamic] Error 2
perl-MooseX-TransactionalMethods-0.009-alt1.1
Can't locate Sub/Name.pm in @INC (you may need to install the Sub::Name module)
(@INC contains: /usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/inc
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/arch
/usr/local/lib/perl/5.34 /usr/local/share/perl/5.34 /usr/lib/perl5 /usr/share/perl5
/usr/lib/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib/MooseX/TransactionalMethods.pm
line 5.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib/MooseX/TransactionalMethods.pm
line 5.
Compilation failed in require at t/subclass.t line 18.
BEGIN failed--compilation aborted at t/subclass.t line 18.
t/subclass.t ...........
--
Can't locate Sub/Name.pm in @INC (you may need to install the Sub::Name module)
(@INC contains: /usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/inc
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/arch
/usr/local/lib/perl/5.34 /usr/local/share/perl/5.34 /usr/lib/perl5 /usr/share/perl5
/usr/lib/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib/MooseX/TransactionalMethods.pm
line 5.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/MooseX-TransactionalMethods-0.009/blib/lib/MooseX/TransactionalMethods.pm
line 5.
Compilation failed in require at t/syntax-sugar.t line 16.
BEGIN failed--compilation aborted at t/syntax-sugar.t line 16.
t/syntax-sugar.t .......
--
Result: FAIL
Failed 2/5 test programs. 0/12 subtests failed.
make: *** [Makefile:784: test_dynamic] Error 2
perl-MooseX-Types-0.50-alt1.1
# BEGIN failed--compilation aborted at (eval 167) line 4.
# expected: ''
# Failed test 'declared class_types don't throw error'
# at t/17_syntax_errors.t line 76.
--
# Compilation failed in require at (eval 169) line 4.
# BEGIN failed--compilation aborted at (eval 169) line 4.
# expected: ''
# Failed test 'declared role_types don't throw error'
# at t/17_syntax_errors.t line 93.
--
# Compilation failed in require at (eval 171) line 4.
# BEGIN failed--compilation aborted at (eval 171) line 4.
# expected: ''
--
Failed 5/5 subtests
# Failed test 'use Combined;'
# at t/18_combined_libs.t line 10.
# Tried to use 'Combined'.
# Error: Can't locate Sub/Name.pm in @INC (you may need to install the Sub::Name
module) (@INC contains: t/lib /usr/src/RPM/BUILD/MooseX-Types-0.50/blib/arch
/usr/src/RPM/BUILD/MooseX-Types-0.50/blib/lib
/usr/local/lib/perl/5.34 /usr/local/share/perl/5.34 /usr/lib/perl5
/usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/MooseX-Types-0.50/blib/lib/MooseX/Types.pm line 15.
# BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/MooseX-Types-0.50/blib/lib/MooseX/Types.pm line 15.
# Compilation failed in require at
/usr/src/RPM/BUILD/MooseX-Types-0.50/blib/lib/MooseX/Types/Moose.pm line 8.
# BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/MooseX-Types-0.50/blib/lib/MooseX/Types/Moose.pm line 8.
# Compilation failed in require at t/lib/TestLibrary.pm line 5.
# BEGIN failed--compilation aborted at t/lib/TestLibrary.pm line 5.
# Compilation failed in require at /usr/share/perl5/Module/Runtime.pm line 314.
portlet-2.0-api-1.0-alt3_22jpp11
[INFO] -------------------------------------------------------------
[ERROR] COMPILATION ERROR :
[INFO] -------------------------------------------------------------
python3-module-easyprocess-1.1-alt1
tests/test_fast/test_proc.py::test_start3 PASSED [ 21%]
tests/test_fast/test_proc.py::test_alive FAILED [ 23%]
tests/test_fast/test_proc.py::test_std PASSED [ 26%]
--
tests/test_fast/test_proc.py::test_wrap PASSED [ 31%]
tests/test_fast/test_proc.py::test_with FAILED [ 34%]
tests/test_fast/test_proc.py::test_parse PASSED [ 36%]
--
=========================== short test summary info ============================
FAILED tests/test_fast/test_proc.py::test_alive - assert False
FAILED tests/test_fast/test_proc.py::test_with - assert False
=================== 2 failed, 36 passed in 77.91s (0:01:17) ====================
python3-module-hupper-1.0-alt2
=========================== short test summary info ============================
FAILED tests/test_it.py::test_myapp_reloads_when_touching_ini - RuntimeError:...
FAILED tests/test_it.py::test_myapp_reloads_when_touching_pyfile - RuntimeErr...
=================== 2 failed, 3 passed, 1 warning in 15.36s ====================
resteasy-3.0.26-alt1_15jpp11
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <args> -rf :resteasy-jaxrs
verilator-5.002-alt1
221 | struct yy_buffer_state
V3PreLex_pregen.yy.cpp:489: note: a different type is defined in another translation unit
489 | struct yy_buffer_state
V3Lexer_pregen.yy.cpp:227: note: the first difference of corresponding definitions is
field 'yy_input_file'
227 | std::streambuf* yy_input_file;
V3PreLex_pregen.yy.cpp:492: note: a field of same name but different type is defined
in another translation unit
492 | FILE *yy_input_file;
V3Lexer_pregen.yy.cpp:221: note: type name 'std::basic_streambuf<char,
std::char_traits<char> >' should match type name '_IO_FILE'
221 | struct yy_buffer_state
make[2]: Leaving directory '/usr/src/RPM/BUILD/verilator-5.002/src/obj_opt'
17 error logs REMOVED from the list
TeXamator-3.0-alt0.1
armadillo-10.2.0-alt1_2
cilk-5.4.6-alt13
colord-1.4.6-alt1
dm-secdel-1.0.9-alt2
libisds-0.11.2-alt1_2
lightdm-1.30.0-alt24
perl-Devel-PerlySense-0.0221-alt2
perl-WWW-Curl-4.17-alt6
python3-module-astor-0.8.1-alt1
python3-module-logutils-0.3.5-alt1
python3-module-mininet-2.3.0d6-alt1
python3-module-mkdocs-1.4.1-alt2
python3-module-natsort-8.2.0-alt1
python3-module-stestr-4.0.1-alt1
qemu-7.2.0-alt3
swi-prolog-8.2.1-alt1.1
Total 76 error logs.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-03-04 7:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-04 7:22 [cyber] I: Sisyphus-20230304 i586 beehive_status: +15 -17 (76) ALT beekeeper
ALT Linux Sisyphus cybertalk
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
public-inbox-index sisyphus-cybertalk
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git