ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Установка Altlinux 10 K RC2 на RAID1
@ 2022-03-06 13:19 Evgenii
  2022-03-07  8:08 ` Sergey
  2022-03-09  8:17 ` Sergey V Turchin
  0 siblings, 2 replies; 3+ messages in thread
From: Evgenii @ 2022-03-06 13:19 UTC (permalink / raw)
  To: community

Добрый день!


Устанавливаю Altlinux 10 Workstation K RC2 как вторую систему на RAID1 
из двух винчестеров.

Текущей системой установлен Altlinux 8.3 Workstation K при таком разбиении:

/dev/md0   /

/dev/md1    swap

/dev/md2    /home

+Неразмеченная область


При установке в ручном режиме создаю в неразмеченной области обоих 
винчестеров по одному разделу с типом "Linux RAID" и объединяю в md3 
(raid1). Задаю точки монтирования:

/dev/md1    swap

/dev/md2    /home

/dev/md3    /


Инсталлятор предлагает установить загрузчик в Раздел md3 (или не 
устанавливать). Соглашаюсь на md3. Далее все как обычно, нормально 
загрузился, но потерял предыдущую систему.

При этом сейчас вижу, что нумерация разделов изменена:

[root@host-193 ~]# cat /proc/mdstat
Personalities : [raid1]
md124 : active raid1 sda1[0] sdb1[1]
       66558912 blocks [2/2] [UU]

md125 : active raid1 sda2[0] sdb2[1]
       8707008 blocks [2/2] [UU]

md126 : active raid1 sdb3[1] sda3[0]
       525310912 blocks [2/2] [UU]

md127 : active raid1 sda5[0] sdb5[1]
       102397947 blocks super 1.2 [2/2] [UU]


Вопросов в итоге два:

- возможно ли было через инсталлятор установить вторую Alt-систему на 
raid-1, не потеряв первую (вовремя перейти из графики в консоль?:);

- как добавить в меню GRUB`а загрузку предыдущей операционки? 
Предполагаю, смотреть надо в сторону /etc/grub.d/40_custom, но что туда 
писать?


--

С уважением,

Евгений



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2022-03-09  8:17 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-06 13:19 [Comm] Установка Altlinux 10 K RC2 на RAID1 Evgenii
2022-03-07  8:08 ` Sergey
2022-03-09  8:17 ` Sergey V Turchin

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git