* [Sysadmins] ipcad start problem
@ 2007-01-15 10:21 altlinux
2007-01-15 10:56 ` Evgenii Terechkov
0 siblings, 1 reply; 2+ messages in thread
From: altlinux @ 2007-01-15 10:21 UTC (permalink / raw)
To: ALT Linux sysadmin discuss
Добрый день, не поможете с такой проблемой.
Установил настроил ipcad.
Запускаю из консоли работает.
Запускаю как /etc/init.d/ipcad start пишет done
но /etc/init.d/ipcad status грит ipcad is dead, but stale PID file exists
В логах tail /var/log/messages
Jan 15 13:16:08 idea ipcad: Opening eth0... [LCap] Initialized as 1
Jan 15 13:16:08 idea ipcad: Configured NetFlow destination at
192.168.168.10:9996
Jan 15 13:16:08 idea ipcad: Aggregate network 192.168.0.0/255.255.0.0 ->
255.255.255.255
Jan 15 13:16:08 idea ipcad: Aggregate network 0.0.0.0/0.0.0.0 ->
255.255.255.0
Jan 15 13:16:08 idea ipcad: Aggregate ports 1024..65535 into 65535
Jan 15 13:16:08 idea ipcad: Aggregate ports 3128..3128 into 3128
Jan 15 13:16:08 idea ipcad: Aggregate ports 150..1023 into 1023
Jan 15 13:16:08 idea ipcad: ipcad startup succeeded
Т.е. не вижу чего вдруг он умер. Куда смотреть?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Sysadmins] ipcad start problem
2007-01-15 10:21 [Sysadmins] ipcad start problem altlinux
@ 2007-01-15 10:56 ` Evgenii Terechkov
0 siblings, 0 replies; 2+ messages in thread
From: Evgenii Terechkov @ 2007-01-15 10:56 UTC (permalink / raw)
To: ALT Linux sysadmin discuss
> Запускаю как /etc/init.d/ipcad start пишет done
> но /etc/init.d/ipcad status грит ipcad is dead, but stale PID file exists
> В логах tail /var/log/messages
> Jan 15 13:16:08 idea ipcad: Opening eth0... [LCap] Initialized as 1
> Jan 15 13:16:08 idea ipcad: Configured NetFlow destination at 192.168.168.10:9996
> Jan 15 13:16:08 idea ipcad: Aggregate network 192.168.0.0/255.255.0.0 -> 255.255.255.255
> Jan 15 13:16:08 idea ipcad: Aggregate network 0.0.0.0/0.0.0.0 -> 255.255.255.0
> Jan 15 13:16:08 idea ipcad: Aggregate ports 1024..65535 into 65535
> Jan 15 13:16:08 idea ipcad: Aggregate ports 3128..3128 into 3128
> Jan 15 13:16:08 idea ipcad: Aggregate ports 150..1023 into 1023
> Jan 15 13:16:08 idea ipcad: ipcad startup succeeded
> Т.е. не вижу чего вдруг он умер. Куда смотреть?
https://bugzilla.altlinux.org/show_bug.cgi?id=9436
--
Терешков Евгений, ALT Linux Team.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-01-15 10:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-15 10:21 [Sysadmins] ipcad start problem altlinux
2007-01-15 10:56 ` Evgenii Terechkov
ALT Linux sysadmins discussion
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sysadmins/0 sysadmins/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sysadmins sysadmins/ http://lore.altlinux.org/sysadmins \
sysadmins@lists.altlinux.org sysadmins@lists.altlinux.ru sysadmins@lists.altlinux.com
public-inbox-index sysadmins
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sysadmins
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git