* [Sysadmins] lilo, raid1, X86_64
@ 2007-02-06 9:51 Соломонов С Н
2007-02-06 11:47 ` Konstantin A. Lepikhov
0 siblings, 1 reply; 3+ messages in thread
From: Соломонов С Н @ 2007-02-06 9:51 UTC (permalink / raw)
To: ALT Linux sysadmin discuss
Уважаемые коллеги!
Пытаюсь поднять root raid на сервере .
Система - сизиф x86_64
Оптимизм был из фразы
"Вах, но по крайней мере оно опять умеет RAID! :-)
http://lists.altlinux.org/pipermail/devel/2007-January/040129.html
Система сидит на соседнем диске /dev/sdd, обновлена до текущего
состояния.
md0 = sda1 sdb1 sbc1 (-spare)
Что делаю, приведено ниже.
Кто знает, что не так?
(комментарии disk в lilo.conf - переносил с сервера с m24 на
котором аналогичная конфигурация работает, новое lilo -не даёт
несколько 0x80- это другие будут грабли при загрузке)
=======================================================
#/lib/udev/vol_id --export /dev/sda1
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.0
ID_FS_UUID=03a4998e-47f8-fa8f-0c51-d181ec6f0ac6
ID_FS_LABEL=
ID_FS_LABEL_SAFE=
# mount -t proc none /mnt/root/proc
# mount --bind /dev /mnt/root/dev
# mount --bind /sys /mnt/root/sys
# cat /mnt/root/etc/lilo.conf
boot=/dev/md0
lba32
message=/boot/splash/message
#vga=0x317
vga=normal
prompt
timeout=50
map=/boot/map
raid-extra-boot=mbr-only
#disk=/dev/sda bios=0x80
#disk=/dev/sdb bios=0x80
#disk=/dev/sdc bios=0x80
image=/boot/vmlinuz-2.6.18-std-smp-alt3
label="linux-raid"
root=/dev/md0
read-only
initrd=/boot/initrd-2.6.18-std-smp-alt3-raid.img
append=" splash=silent"
# chroot /mnt/root
# lilo -t -v4
LILO version 22.7.3 (test mode), Copyright (C) 1992-1998 Werner
Almesberger
Development beyond version 21 Copyright (C) 1999-2006 John Coffman
Released 11-Aug-2006, and compiled at 15:29:54 on Jan 17 2007
pf: dev=0800 id=3FE995C6 name=/dev/sda
pf: dev=0810 id=7025DF2A name=/dev/sdb
pf: dev=0820 id=0B70366A name=/dev/sdc
pf: dev=0830 id=753DA5F7 name=/dev/sdd
pf_hard_disk_scan: ndevs=4
0800 3FE995C6 /dev/sda
0810 7025DF2A /dev/sdb
0820 0B70366A /dev/sdc
0830 753DA5F7 /dev/sdd
Resolve invalid VolumeIDs
Resolve duplicate VolumeIDs
0800 3FE995C6 /dev/sda
0810 7025DF2A /dev/sdb
0820 0B70366A /dev/sdc
0830 753DA5F7 /dev/sdd
device codes (user assigned pf) = 0
device codes (user assigned) = 0
device codes (BIOS assigned) = F
device codes (canonical) = F
RAID info: nr=3, raid=2, active=2, working=3, failed=0, spare=1
md: RAIDset device 0 = 0xFD00
device-mapper: device: 0xfd0e: name: [sdc7]
device-mapper: device: 0xfd04: name: [sdb2]
device-mapper: device: 0xfd0b: name: [sdc6]
device-mapper: device: 0xfd01: name: [sdb1]
device-mapper: device: 0xfd08: name: [sdc5]
device-mapper: device: 0xfd0c: name: [sda7]
device-mapper: device: 0xfd09: name: [sda6]
device-mapper: device: 0xfd06: name: [sda5]
device-mapper: device: 0xfd05: name: [sdc2]
device-mapper: device: 0xfd11: name: [sdd6]
device-mapper: device: 0xfd02: name: [sdc1]
device-mapper: device: 0xfd10: name: [sdd5]
device-mapper: device: 0xfd0d: name: [sdb7]
device-mapper: device: 0xfd03: name: [sda2]
device-mapper: device: 0xfd0a: name: [sdb6]
device-mapper: device: 0xfd00: name: [sda1]
Device 0x0800: BIOS drive 0x83, 255 heads, 30515 cylinders,
63 sectors. Partition offset: 0 sectors.
registering bios=0x83 device=0x0800
Using Volume ID 3FE995C6 on bios 83
RAID scan: geo_get: returns geo->device = 0x83 for device FD00
Fatal: is_primary: Not a valid device 0xFD00
[root@cluster1 /]#
==============================================
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Sysadmins] lilo, raid1, X86_64
2007-02-06 9:51 [Sysadmins] lilo, raid1, X86_64 Соломонов С Н
@ 2007-02-06 11:47 ` Konstantin A. Lepikhov
2007-02-06 12:46 ` Соломонов С Н
0 siblings, 1 reply; 3+ messages in thread
From: Konstantin A. Lepikhov @ 2007-02-06 11:47 UTC (permalink / raw)
To: sysadmins
<цитата от="Соломонов С Н">
> Уважаемые коллеги!
> Пытаюсь поднять root raid на сервере .
> Система - сизиф x86_64
> Оптимизм был из фразы
> "Вах, но по крайней мере оно опять умеет RAID! :-)
> http://lists.altlinux.org/pipermail/devel/2007-January/040129.html
> Система сидит на соседнем диске /dev/sdd, обновлена до текущего
> состояния.
> md0 = sda1 sdb1 sbc1 (-spare)
> Что делаю, приведено ниже.
> Кто знает, что не так?
> (комментарии disk в lilo.conf - переносил с сервера с m24 на
> котором аналогичная конфигурация работает, новое lilo -не даёт
> несколько 0x80- это другие будут грабли при загрузке)
> =======================================================
> #/lib/udev/vol_id --export /dev/sda1
> ID_FS_USAGE=raid
> ID_FS_TYPE=linux_raid_member
> ID_FS_VERSION=0.90.0
> ID_FS_UUID=03a4998e-47f8-fa8f-0c51-d181ec6f0ac6
> ID_FS_LABEL=
> ID_FS_LABEL_SAFE=
> # mount -t proc none /mnt/root/proc
> # mount --bind /dev /mnt/root/dev
> # mount --bind /sys /mnt/root/sys
> # cat /mnt/root/etc/lilo.conf
> boot=/dev/md0
> lba32
> message=/boot/splash/message
> #vga=0x317
> vga=normal
> prompt
> timeout=50
> map=/boot/map
> raid-extra-boot=mbr-only
> #disk=/dev/sda bios=0x80
> #disk=/dev/sdb bios=0x80
> #disk=/dev/sdc bios=0x80
>
> image=/boot/vmlinuz-2.6.18-std-smp-alt3
> label="linux-raid"
> root=/dev/md0
> read-only
> initrd=/boot/initrd-2.6.18-std-smp-alt3-raid.img
> append=" splash=silent"
> # chroot /mnt/root
> # lilo -t -v4
> LILO version 22.7.3 (test mode), Copyright (C) 1992-1998 Werner
> Almesberger
> Development beyond version 21 Copyright (C) 1999-2006 John Coffman
> Released 11-Aug-2006, and compiled at 15:29:54 on Jan 17 2007
>
> pf: dev=0800 id=3FE995C6 name=/dev/sda
> pf: dev=0810 id=7025DF2A name=/dev/sdb
> pf: dev=0820 id=0B70366A name=/dev/sdc
> pf: dev=0830 id=753DA5F7 name=/dev/sdd
> pf_hard_disk_scan: ndevs=4
> 0800 3FE995C6 /dev/sda
> 0810 7025DF2A /dev/sdb
> 0820 0B70366A /dev/sdc
> 0830 753DA5F7 /dev/sdd
> Resolve invalid VolumeIDs
> Resolve duplicate VolumeIDs
> 0800 3FE995C6 /dev/sda
> 0810 7025DF2A /dev/sdb
> 0820 0B70366A /dev/sdc
> 0830 753DA5F7 /dev/sdd
> device codes (user assigned pf) = 0
> device codes (user assigned) = 0
> device codes (BIOS assigned) = F
> device codes (canonical) = F
> RAID info: nr=3, raid=2, active=2, working=3, failed=0, spare=1
> md: RAIDset device 0 = 0xFD00
> device-mapper: device: 0xfd0e: name: [sdc7]
> device-mapper: device: 0xfd04: name: [sdb2]
> device-mapper: device: 0xfd0b: name: [sdc6]
> device-mapper: device: 0xfd01: name: [sdb1]
> device-mapper: device: 0xfd08: name: [sdc5]
> device-mapper: device: 0xfd0c: name: [sda7]
> device-mapper: device: 0xfd09: name: [sda6]
> device-mapper: device: 0xfd06: name: [sda5]
> device-mapper: device: 0xfd05: name: [sdc2]
> device-mapper: device: 0xfd11: name: [sdd6]
> device-mapper: device: 0xfd02: name: [sdc1]
> device-mapper: device: 0xfd10: name: [sdd5]
> device-mapper: device: 0xfd0d: name: [sdb7]
> device-mapper: device: 0xfd03: name: [sda2]
> device-mapper: device: 0xfd0a: name: [sdb6]
> device-mapper: device: 0xfd00: name: [sda1]
> Device 0x0800: BIOS drive 0x83, 255 heads, 30515 cylinders,
> 63 sectors. Partition offset: 0 sectors.
> registering bios=0x83 device=0x0800
> Using Volume ID 3FE995C6 on bios 83
> RAID scan: geo_get: returns geo->device = 0x83 for device FD00
> Fatal: is_primary: Not a valid device 0xFD00
> [root@cluster1 /]#
> ==============================================
а версия lilo какая?
--
WBR et al.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Sysadmins] lilo, raid1, X86_64
2007-02-06 11:47 ` Konstantin A. Lepikhov
@ 2007-02-06 12:46 ` Соломонов С Н
0 siblings, 0 replies; 3+ messages in thread
From: Соломонов С Н @ 2007-02-06 12:46 UTC (permalink / raw)
To: ALT Linux sysadmin discuss
Konstantin A. Lepikhov пишет:
> <цитата от="Соломонов С Н">
>> Уважаемые коллеги!
>> Пытаюсь поднять root raid на сервере .
>> Система - сизиф x86_64
>> Оптимизм был из фразы
>> "Вах, но по крайней мере оно опять умеет RAID! :-)
>> http://lists.altlinux.org/pipermail/devel/2007-January/040129.html
>> Система сидит на соседнем диске /dev/sdd, обновлена до текущего
>> состояния.
>> md0 = sda1 sdb1 sbc1 (-spare)
>> Что делаю, приведено ниже.
>> Кто знает, что не так?
>> (комментарии disk в lilo.conf - переносил с сервера с m24 на
>> котором аналогичная конфигурация работает, новое lilo -не даёт
>> несколько 0x80- это другие будут грабли при загрузке)
>> =======================================================
>> #/lib/udev/vol_id --export /dev/sda1
>> ID_FS_USAGE=raid
>> ID_FS_TYPE=linux_raid_member
>> ID_FS_VERSION=0.90.0
>> ID_FS_UUID=03a4998e-47f8-fa8f-0c51-d181ec6f0ac6
>> ID_FS_LABEL=
>> ID_FS_LABEL_SAFE=
>> # mount -t proc none /mnt/root/proc
>> # mount --bind /dev /mnt/root/dev
>> # mount --bind /sys /mnt/root/sys
>> # cat /mnt/root/etc/lilo.conf
>> boot=/dev/md0
>> lba32
>> message=/boot/splash/message
>> #vga=0x317
>> vga=normal
>> prompt
>> timeout=50
>> map=/boot/map
>> raid-extra-boot=mbr-only
>> #disk=/dev/sda bios=0x80
>> #disk=/dev/sdb bios=0x80
>> #disk=/dev/sdc bios=0x80
>>
>> image=/boot/vmlinuz-2.6.18-std-smp-alt3
>> label="linux-raid"
>> root=/dev/md0
>> read-only
>> initrd=/boot/initrd-2.6.18-std-smp-alt3-raid.img
>> append=" splash=silent"
>> # chroot /mnt/root
>> # lilo -t -v4
>> LILO version 22.7.3 (test mode), Copyright (C) 1992-1998 Werner
>> Almesberger
>> Development beyond version 21 Copyright (C) 1999-2006 John Coffman
>> Released 11-Aug-2006, and compiled at 15:29:54 on Jan 17 2007
>>
>> pf: dev=0800 id=3FE995C6 name=/dev/sda
>> pf: dev=0810 id=7025DF2A name=/dev/sdb
>> pf: dev=0820 id=0B70366A name=/dev/sdc
>> pf: dev=0830 id=753DA5F7 name=/dev/sdd
>> pf_hard_disk_scan: ndevs=4
>> 0800 3FE995C6 /dev/sda
>> 0810 7025DF2A /dev/sdb
>> 0820 0B70366A /dev/sdc
>> 0830 753DA5F7 /dev/sdd
>> Resolve invalid VolumeIDs
>> Resolve duplicate VolumeIDs
>> 0800 3FE995C6 /dev/sda
>> 0810 7025DF2A /dev/sdb
>> 0820 0B70366A /dev/sdc
>> 0830 753DA5F7 /dev/sdd
>> device codes (user assigned pf) = 0
>> device codes (user assigned) = 0
>> device codes (BIOS assigned) = F
>> device codes (canonical) = F
>> RAID info: nr=3, raid=2, active=2, working=3, failed=0, spare=1
>> md: RAIDset device 0 = 0xFD00
>> device-mapper: device: 0xfd0e: name: [sdc7]
>> device-mapper: device: 0xfd04: name: [sdb2]
>> device-mapper: device: 0xfd0b: name: [sdc6]
>> device-mapper: device: 0xfd01: name: [sdb1]
>> device-mapper: device: 0xfd08: name: [sdc5]
>> device-mapper: device: 0xfd0c: name: [sda7]
>> device-mapper: device: 0xfd09: name: [sda6]
>> device-mapper: device: 0xfd06: name: [sda5]
>> device-mapper: device: 0xfd05: name: [sdc2]
>> device-mapper: device: 0xfd11: name: [sdd6]
>> device-mapper: device: 0xfd02: name: [sdc1]
>> device-mapper: device: 0xfd10: name: [sdd5]
>> device-mapper: device: 0xfd0d: name: [sdb7]
>> device-mapper: device: 0xfd03: name: [sda2]
>> device-mapper: device: 0xfd0a: name: [sdb6]
>> device-mapper: device: 0xfd00: name: [sda1]
>> Device 0x0800: BIOS drive 0x83, 255 heads, 30515 cylinders,
>> 63 sectors. Partition offset: 0 sectors.
>> registering bios=0x83 device=0x0800
>> Using Volume ID 3FE995C6 on bios 83
>> RAID scan: geo_get: returns geo->device = 0x83 for device FD00
>> Fatal: is_primary: Not a valid device 0xFD00
>> [root@cluster1 /]#
>> ==============================================
> а версия lilo какая?
>
~]$ rpm -q lilo
lilo-22.7.3-alt4
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-02-06 12:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-06 9:51 [Sysadmins] lilo, raid1, X86_64 Соломонов С Н
2007-02-06 11:47 ` Konstantin A. Lepikhov
2007-02-06 12:46 ` Соломонов С Н
ALT Linux sysadmins discussion
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sysadmins/0 sysadmins/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sysadmins sysadmins/ http://lore.altlinux.org/sysadmins \
sysadmins@lists.altlinux.org sysadmins@lists.altlinux.ru sysadmins@lists.altlinux.com
public-inbox-index sysadmins
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sysadmins
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git