* [sisyphus] Re: openssh: scp1?
2002-11-20 17:47 ` Sergey Vlasov
@ 2002-11-20 18:14 ` Alexey Tourbin
0 siblings, 0 replies; 3+ messages in thread
From: Alexey Tourbin @ 2002-11-20 18:14 UTC (permalink / raw)
To: sisyphus
On Wed, Nov 20, 2002 at 08:47:25PM +0300, Sergey Vlasov wrote:
> Просто ssh на эти машины работает?
Работает.
> С дополнительным опциями?
Не знаю, что такое дополнительные опции.
> Что выдает с опцией -v (и ssh, и scp)?
$ scp -v main:mbox .
Executing: program /usr/bin/ssh host main, user (unspecified), command scp -v -f mbox
OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090607f
debug1: Reading configuration data /home/at/.ssh/config
debug1: Applying options for *
debug1: Applying options for main
debug1: Reading configuration data /etc/openssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to ... [555.555.555.555] port 22.
debug1: Connection established.
debug1: identity file /home/at/.ssh/identity type 0
debug1: identity file /home/at/.ssh/id_rsa type -1
debug1: identity file /home/at/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version 2.3.0 SSH
Secure Shell (non-commercial)
debug1: match: 2.3.0 SSH Secure Shell (non-commercial) pat 2.2.0*,2.3.0*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client blowfish-cbc hmac-md5 zlib
debug1: kex: client->server blowfish-cbc hmac-md5 zlib
debug1: dh_gen_key: priv key bits set: 142/256
debug1: bits set: 517/1024
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Host '...' is known and matches the DSA host key.
debug1: Found key in /home/at/.ssh/known_hosts:8
debug1: bits set: 504/1024
debug1: ssh_dss_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: Enabling compression at level 6.
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password,hostbased
debug1: next auth method to try is publickey
debug1: try privkey: /home/at/.ssh/id_rsa
debug1: try privkey: /home/at/.ssh/id_dsa
debug1: next auth method to try is password
...'s password:
debug1: ssh-userauth2 successful: method password
debug1: fd 4 setting O_NONBLOCK
debug1: fd 5 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: Sending command: scp -v -f mbox
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 10000 rmax 32768
scp: warning: Executing scp1 compatibility.
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd close
debug1: channel 0: output open -> drain
debug1: channel 0: close_read
debug1: channel 0: input open -> closed
scp: FATAL: Executing ssh1 in compatibility mode failed (Check that scp1
is in your PATH).
debug1: channel 0: obuf empty
debug1: channel 0: close_write
debug1: channel 0: output drain -> closed
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 2.2 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 255
debug1: compress outgoing: raw data 172, compressed 134, factor 0.78
debug1: compress incoming: raw data 260, compressed 213, factor 0.82
$ scp -v -oProtocol=1 main:mbox .
Executing: program /usr/bin/ssh host main, user (unspecified), command
scp -v -f mbox
OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090607f
debug1: Reading configuration data /home/at/.ssh/config
debug1: Applying options for *
debug1: Applying options for main
debug1: Reading configuration data /etc/openssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be
trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to ... [555.555.555.555] port 22.
debug1: Connection established.
debug1: identity file /home/at/.ssh/identity type 0
debug1: Remote protocol version 1.99, remote software version 2.3.0 SSH
Secure Shell (non-commercial)
debug1: match: 2.3.0 SSH Secure Shell (non-commercial) pat 2.2.0*,2.3.0*
debug1: Local version string SSH-1.5-OpenSSH_3.4p1
debug1: Waiting for server public key.
Connection closed by 555.555.555.555
debug1: Calling cleanup 0x8064740(0x0)
$ ssh -v main
OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090607f
debug1: Reading configuration data /home/at/.ssh/config
debug1: Applying options for *
debug1: Applying options for main
debug1: Reading configuration data /etc/openssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be
trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to ... [555.555.555.555] port 22.
debug1: Connection established.
debug1: identity file /home/at/.ssh/identity type 0
debug1: identity file /home/at/.ssh/id_rsa type -1
debug1: identity file /home/at/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version 2.3.0 SSH
Secure Shell (non-commercial)
debug1: match: 2.3.0 SSH Secure Shell (non-commercial) pat 2.2.0*,2.3.0*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client blowfish-cbc hmac-md5 zlib
debug1: kex: client->server blowfish-cbc hmac-md5 zlib
debug1: dh_gen_key: priv key bits set: 117/256
debug1: bits set: 523/1024
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Host '...' is known and matches the DSA host key.
debug1: Found key in /home/at/.ssh/known_hosts:8
...'s password:
debug1: ssh-userauth2 successful: method password
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: channel request 0: pty-req
debug1: channel request 0: shell
debug1: fd 3 setting TCP_NODELAY
debug1: channel 0: open confirm rwindow 10000 rmax 16384
Last login: ...
No mail.
[DBA@main ~] >
> man -a scp читать пробовали? (Русский перевод, как обычно, отстает от
> оригинала.)
Пробовал. :)
--
WBR, Alexey Tourbin "He is a sane man who can have tragedy
BIOZAK Ltd., Russia in his heart and comedy in his head."
--G.K.Chesterton
^ permalink raw reply [flat|nested] 3+ messages in thread