* [sisyphus] SciLab 2.6
@ 2001-11-11 12:35 Serge Skorokhodov
2001-11-12 8:33 ` Stanislav Ievlev
0 siblings, 1 reply; 3+ messages in thread
From: Serge Skorokhodov @ 2001-11-11 12:35 UTC (permalink / raw)
To: sisyphus; +Cc: lbyf
Здравствуйте!
Только что обновил все, связанное с rpm из updates для spring, но
результат сборки src.rpm тот-же:( (scilab скачивал до перехода на
rpm4).
+ perl -pi -e s+/bin/sh5+/bin/sh+ ./bin/dold
+ cd /var/tmp/scilab-buildroot/usr/lib/scilab-2.6
++ find util/ bin/
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/
Can't do inplace edit: util/ is not a regular file.
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Mak2VCMak
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Make.unx
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidem-gcwin32
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/GLoad.sce
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/README
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Blatdoc
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scicomp
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Slatdocs
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scibatch
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidem
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidoc
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scilib
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Slatdoc
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/MakeC.mak
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/MakeF.mak
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/sci2for.f
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Mak2ABSMak
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Blatdocs
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/
Can't do inplace edit: bin/ is not a regular file.
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blpr
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slpr
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/dold
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/geci
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci-n
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/BEpsf
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/SEpsf
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/xless
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatdoc
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/wgscilab.mnu
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilink
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/wscilab.mnu
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexpr
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/minfopr
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/f77-linux
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexpr2
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexprs
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilab
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilex
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/xmetanet
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexpr2
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexprs
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatdocs
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexpr
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/.scicos_pal
+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci
+ cd /var/tmp/scilab-buildroot/usr/bin
+ ln -s /usr/lib/scilab-2.6/bin/scilab scilab
+ ln -s /usr/lib/scilab-2.6/bin/xless xless
+ cd /var/tmp/scilab-buildroot/usr/lib/X11/app-defaults
+ ln -s /usr/share/scilab-2.6/X11_defaults/Xscilab Xscilab
+ find /var/tmp/scilab-buildroot/usr/lib/scilab-2.6 -type f -name 'Make*' -exec chmod -x '{}' ';'+ /usr/lib/rpm/brp-alt
Compressing files in /var/tmp/scilab-buildroot (auto)
Stripping binaries in /var/tmp/scilab-buildroot (executable,shared)
objdump: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
strip: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
Bad exit status from /var/tmp/rpm-tmp.24546 (%install)
Места вагон:
Filesystem Size Used Avail Use% Mounted on
/dev/hde7 6.4G 3.7G 2.7G 58% /
/dev/hda5 15M 2.3M 12M 16% /boot
/dev/hdg6 3.4G 408M 2.9G 12% /home
/dev/hda1 3.6G 2.0G 1.6G 54% /mnt/C
/dev/hde5 1.5G 43M 1.4G 3% /tmp
/dev/hdg5 988M 219M 719M 24% /usr/local
/dev/hde6 1.5G 673M 833M 45% /var
Куды бечь, за что хвататься?
--
Serge Skorokhodov aka suralis.
mailto: suralis-s@mtu-net.ru
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [sisyphus] SciLab 2.6
2001-11-11 12:35 [sisyphus] SciLab 2.6 Serge Skorokhodov
@ 2001-11-12 8:33 ` Stanislav Ievlev
2001-11-12 12:06 ` Re[2]: " Serge Skorokhodov
0 siblings, 1 reply; 3+ messages in thread
From: Stanislav Ievlev @ 2001-11-12 8:33 UTC (permalink / raw)
To: sisyphus
Serge Skorokhodov wrote:
>Здравствуйте!
>
>Только что обновил все, связанное с rpm из updates для spring, но
>результат сборки src.rpm тот-же:( (scilab скачивал до перехода на
>rpm4).
>
Проверил - собирается под любыми RPM.
>
>
>+ perl -pi -e s+/bin/sh5+/bin/sh+ ./bin/dold
>+ cd /var/tmp/scilab-buildroot/usr/lib/scilab-2.6
>++ find util/ bin/
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/
>Can't do inplace edit: util/ is not a regular file.
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Mak2VCMak
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Make.unx
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidem-gcwin32
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/GLoad.sce
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/README
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Blatdoc
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scicomp
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Slatdocs
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scibatch
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidem
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scidoc
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/scilib
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Slatdoc
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/MakeC.mak
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/MakeF.mak
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/sci2for.f
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Mak2ABSMak
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Blatdocs
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/
>Can't do inplace edit: bin/ is not a regular file.
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blpr
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slpr
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/dold
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/geci
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci-n
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/BEpsf
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/SEpsf
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/xless
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatdoc
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/wgscilab.mnu
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilink
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/wscilab.mnu
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexpr
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/minfopr
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/f77-linux
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexpr2
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slatexprs
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilab
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/scilex
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/xmetanet
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexpr2
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexprs
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatdocs
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blatexpr
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/.scicos_pal
>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci
>+ cd /var/tmp/scilab-buildroot/usr/bin
>+ ln -s /usr/lib/scilab-2.6/bin/scilab scilab
>+ ln -s /usr/lib/scilab-2.6/bin/xless xless
>+ cd /var/tmp/scilab-buildroot/usr/lib/X11/app-defaults
>+ ln -s /usr/share/scilab-2.6/X11_defaults/Xscilab Xscilab
>+ find /var/tmp/scilab-buildroot/usr/lib/scilab-2.6 -type f -name 'Make*' -exec chmod -x '{}' ';'+ /usr/lib/rpm/brp-alt
>Compressing files in /var/tmp/scilab-buildroot (auto)
>Stripping binaries in /var/tmp/scilab-buildroot (executable,shared)
>objdump: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
>strip: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
>Bad exit status from /var/tmp/rpm-tmp.24546 (%install)
>
>Места вагон:
>
>Filesystem Size Used Avail Use% Mounted on
>/dev/hde7 6.4G 3.7G 2.7G 58% /
>/dev/hda5 15M 2.3M 12M 16% /boot
>/dev/hdg6 3.4G 408M 2.9G 12% /home
>/dev/hda1 3.6G 2.0G 1.6G 54% /mnt/C
>/dev/hde5 1.5G 43M 1.4G 3% /tmp
>/dev/hdg5 988M 219M 719M 24% /usr/local
>/dev/hde6 1.5G 673M 833M 45% /var
>
>Куды бечь, за что хвататься?
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re[2]: [sisyphus] SciLab 2.6
2001-11-12 8:33 ` Stanislav Ievlev
@ 2001-11-12 12:06 ` Serge Skorokhodov
0 siblings, 0 replies; 3+ messages in thread
From: Serge Skorokhodov @ 2001-11-12 12:06 UTC (permalink / raw)
To: Stanislav Ievlev
Здравствуйте!
Stanislav Ievlev пишет, что:
SI> Serge Skorokhodov wrote:
>> Только что обновил все, связанное с rpm из updates для spring,
>> но результат сборки src.rpm тот-же:( (scilab скачивал до
>> перехода на rpm4).
SI> Проверил - собирается под любыми RPM.
Что особенно обидно -- сам SciLab прекрасно собирается и ложится
в /var/tmp/scilab-buildroot, я им даже немного попользовался
оттуда -- демки работают:) Такое впечатление, что не создается
собственно rpm. Я отметил несколько подозрительных моментов в
выводе, которые затрудняюсь интерпретировать. Это так и должно
быть?
>>+ perl -pi -e s+/bin/sh5+/bin/sh+ ./bin/dold
>>+ cd /var/tmp/scilab-buildroot/usr/lib/scilab-2.6
>>++ find util/ bin/
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/
>>Can't do inplace edit: util/ is not a regular file.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<skip>
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/sci2for.f
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Mak2ABSMak
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ util/Blatdocs
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/
>>Can't do inplace edit: bin/ is not a regular file.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Blpr
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/Slpr
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/dold
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/geci
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci-n
<skip>
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/.scicos_pal
>>+ perl -pi -e s+/usr/src/RPM/BUILD+/usr/lib+ bin/intersci
>>+ cd /var/tmp/scilab-buildroot/usr/bin
>>+ ln -s /usr/lib/scilab-2.6/bin/scilab scilab
>>+ ln -s /usr/lib/scilab-2.6/bin/xless xless
>>+ cd /var/tmp/scilab-buildroot/usr/lib/X11/app-defaults
>>+ ln -s /usr/share/scilab-2.6/X11_defaults/Xscilab Xscilab
>>+ find /var/tmp/scilab-buildroot/usr/lib/scilab-2.6 -type f -name 'Make*' -exec chmod -x '{}' ';'+ /usr/lib/rpm/brp-alt
>>Compressing files in /var/tmp/scilab-buildroot (auto)
>>Stripping binaries in /var/tmp/scilab-buildroot (executable,shared)
>>objdump: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
>>strip: /var/tmp/scilab-buildroot/usr/lib/scilab-2.6/bin/Slpr: File truncated
>>Bad exit status from /var/tmp/rpm-tmp.24546 (%install)
И закономерный финал:( Что-то с самим rpm или его "обвязкой".
Прям хоть в /usr/local ставь.
--
Serge Skorokhodov aka suralis
12.11.2001 suralis-s@mtu-net.ru
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-11-12 12:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-11 12:35 [sisyphus] SciLab 2.6 Serge Skorokhodov
2001-11-12 8:33 ` Stanislav Ievlev
2001-11-12 12:06 ` Re[2]: " Serge Skorokhodov
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git