ALT Linux Sisyphus cybertalk
 help / color / mirror / Atom feed
* [cyber] I: p9-20201115 x86_64 beehive_status: +11 -8 (120)
@ 2020-11-15  6:40 ALT beekeeper
  0 siblings, 0 replies; only message in thread
From: ALT beekeeper @ 2020-11-15  6:40 UTC (permalink / raw)
  To: sisyphus-cybertalk

	11 NEW error logs

apache-commons-ognl-3.0.2-alt2_15.20120313svn1102435jpp8
	[ERROR]
	[ERROR] Please refer to
	/usr/src/RPM/BUILD/apache-commons-ognl-3.0.2/target/surefire-reports for the individual
	test results.
	[ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream
	and [date]-jvmRun[N].dumpstream.
	[ERROR] -> [Help 1]
	[ERROR]
	[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
	[ERROR] Re-run Maven using the -X switch to enable full debug logging.
	[ERROR]
	[ERROR] For more information about the errors and possible solutions, please read the
	following articles:
	[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException

automake_1.11-1.11.6-alt9
	checking for upc... no
	configure: error: no Unified Parallel C compiler was found
	+ exit_status=77
	--
	+ exit 77
	1 of 893 tests failed
	(58 tests were not run)

cilk-5.4.6-alt11
	perl -I. ./bfnnconv.pl ./cilk-faq.bfnn
	no ./cilk-faq.xrefdb (No such file or directory) at ./bfnnconv.pl line 43.
	S0	    \rS1		 \rQ1.1		\rQ1.2	       \rQ1.3	      \rQ1.4	     \rQ1.5
	\rQ1.6	       \rQ1.7	      \rQ1.8	     \rS2	  \rQ2.1		 \rQ2.2
	\rQ2.3	       \rQ2.4	      \rS3	   \rQ3.1	  \rQ3.2		 \rQ3.3
	\rQ3.4	       \runknown question `compile' at ./bfnnconv.pl line 221, <> line 263.
	--
	libtool: install: /bin/install -p .libs/libcilk.g.so.0.0.0
	/usr/src/tmp/cilk-buildroot/usr/lib64/libcilk.g.so.0.0.0
	/bin/install: cannot stat '.libs/libcilk.g.so.0.0.0': No such file or directory
	make[2]: *** [Makefile:565: install-libLTLIBRARIES] Error 1

csync2-2.0-alt1
	printf("R\t%s\t%s\t%s\n", myname, peername, r_file); ret=0;
	make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0'
	make[1]: Entering directory '/usr/src/RPM/BUILD/csync2-2.0'
	x86_64-alt-linux-gcc -DHAVE_CONFIG_H -I.  -D'DBDIR="/var/lib/csync2"'
	-D'ETCDIR="/etc/csync2"'   -Wall  -pipe -frecord-gcc-switches -Wall -g -O2 -c -o
	cfgfile_scanner.o cfgfile_scanner.c
	make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0'
	make[1]: Entering directory '/usr/src/RPM/BUILD/csync2-2.0'
	x86_64-alt-linux-gcc  -Wall  -pipe -frecord-gcc-switches -Wall -g -O2 -lgnutls	 -o
	csync2 action.o cfgfile_parser.o cfgfile_scanner.o check.o checktxt.o csync2.o daemon.o
	db.o error.o getrealfn.o groups.o rsync.o update.o urlencode.o conn.o prefixsubst.o
	db_api.o db_sqlite.o db_sqlite2.o db_mysql.o db_postgres.o  -lrsync  -ldl -lgnutls
	make[1]: Leaving directory '/usr/src/RPM/BUILD/csync2-2.0'
	+ pdftotext /usr/src/RPM/SOURCES/paper.pdf paper.txt
	/usr/src/tmp/rpm-tmp.78066: line 131: pdftotext: command not found

dopewars-1.5.12-alt1_20.1033svn
	/bin/sh ../../libtool --mode=link x86_64-alt-linux-gcc	-pipe -frecord-gcc-switches
	-Wall -g -O2 -Wall  -o libsound_sdl.la -rpath /usr/lib64 -lSDL -lpthread -lSDL_mixer
	sound_sdl.lo  -lglib-2.0
	libtool: link: rm -fr  .libs/libsound_sdl.a
	libtool: link: x86_64-alt-linux-gcc -shared  -fPIC -DPIC  .libs/sound_sdl.o   -lSDL
	-lpthread -lSDL_mixer -lglib-2.0  -g -O2   -Wl,-soname -Wl,libsound_sdl.so.0 -o
	.libs/libsound_sdl.so.0.0.0
	libtool: link: (cd ".libs" && rm -f "libsound_sdl.so.0" && ln -s "libsound_sdl.so.0.0.0"
	"libsound_sdl.so.0")
	libtool: link: (cd ".libs" && rm -f "libsound_sdl.so" && ln -s "libsound_sdl.so.0.0.0"
	"libsound_sdl.so")
	libtool: link: ( cd ".libs" && rm -f "libsound_sdl.la" && ln -s "../libsound_sdl.la"
	"libsound_sdl.la" )
	make[3]: Leaving directory '/usr/src/RPM/BUILD/dopewars/src/plugins'
	make[2]: *** [Makefile:574: all-recursive] Error 1
	make[1]: *** [Makefile:474: all-recursive] Error 1
	make: *** [Makefile:402: all] Error 2

libnih-1.0.3-alt2
	../test-driver: line 107: 622732 Aborted		 "$@" > $log_file 2>&1
	FAIL: test_parse
	PASS: test_output
	--
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	See nih-dbus-tool/test-suite.log

libopenh264-2.0.0-alt1
	--- stderr ---
	[OpenH264] this = 0x0x1132c20, Error:Don't support width(9) or height(13) which is less
	than 16!
	[OpenH264] this = 0x0x1132c20, Error:CWelsH264SVCEncoder::EncodeFrame(), kiEncoderReturn 5
	Full log written to
	/usr/src/RPM/BUILD/openh264-2.0.0/x86_64-alt-linux/meson-logs/testlog.txt
	FAILED: meson-test
	/usr/bin/meson test --no-rebuild --print-errorlogs

libpng16-1.6.36-alt1
	make[3]: Entering directory '/usr/src/RPM/BUILD/libpng16-1.6.36'
	FAIL: tests/pngtest
	make[3]: Leaving directory '/usr/src/RPM/BUILD/libpng16-1.6.36'
	--
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	.. contents:: :depth: 2
	FAIL: tests/pngtest
	Testing libpng version 1.6.36
	--
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	See ./test-suite.log

python-module-jupyter_console-5.2.0-alt1.1
	jupyter console --help-all works ... ok
	Ensure display protocol plain/text key is supported ... ERROR
	jupyter console --generate-config works ... ok
	--
	test_handle_image_tempfile
	(jupyter_console.tests.test_image_handler.ZMQTerminalInteractiveShellTestCase) ... ok
	ERROR: Ensure display protocol plain/text key is supported
	Traceback (most recent call last):
	--
	Ran 9 tests in 67.838s
	FAILED (errors=1)

python-module-radar-0.3-alt1.git20131211.1.1.1
	test_06_random_date_with_string_ranges_given (__main__.RadarTest) ... FAIL
	FAIL: test_06_random_date_with_string_ranges_given (__main__.RadarTest)
	Traceback (most recent call last):
	--
	self.assertTrue(res > dt_start)
	AssertionError: False is not true
	Ran 6 tests in 0.037s
	FAILED (failures=1)
	test_01_random_datetime

sgc-0.2.1-alt3
	+ xvfb-run sh makedocs
	_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created.
	The XKEYBOARD keymap compiler (xkbcomp) reports:
	--
	pygame.display.init()
	error: Couldn't open X11 display
	The full traceback has been saved in /usr/src/tmp/sphinx-err-zGepeg.log, if you want
	to report the issue to the developers.

	8 error logs REMOVED from the list
R-base-3.5.3-alt1
chromium-gost-83.0.4103.61-alt2.M90P.1
compiz-0.9.14.1-alt1
java-9-openjdk-0:9.0.4.11-alt2_6jpp8.M90P.1
jmock-0:2.8.2-alt2_6jpp8
librabbitmq-c-0.9.0-alt1
postfix-1:2.11.11-alt2
vi-traditional-050325-alt1

Total 120 error logs.


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-11-15  6:40 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-15  6:40 [cyber] I: p9-20201115 x86_64 beehive_status: +11 -8 (120) ALT beekeeper

ALT Linux Sisyphus cybertalk

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
		sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
	public-inbox-index sisyphus-cybertalk

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git