ALT Linux Sisyphus cybertalk
 help / color / mirror / Atom feed
* [cyber] I: Sisyphus-20180313 i586 beehive_status: +22 -23 (517)
@ 2018-03-13 11:54 ALT beekeeper
  0 siblings, 0 replies; only message in thread
From: ALT beekeeper @ 2018-03-13 11:54 UTC (permalink / raw)
  To: sisyphus-cybertalk

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 10058 bytes --]

	22 NEW error logs

OpenAD-20140315-alt3
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

asl-1.42-alt2_0.33.bld115
	(/usr/share/texmf-dist/tex/latex/base/size12.clo))
	! LaTeX Error: File `german.sty' not found.
	Type X to quit or <RETURN> to proceed,

atlas-3.9.35-alt1.qa1
	/usr/src/RPM/BUILD/ATLAS/BUILD/..//include/atlas_genparse.h:316:95: w
	hasher-priv: master: idle time limit (3600 seconds) exceeded

borg-1.1.4-alt1
	return codecs.ascii_decode(input, self.errors)[0]
	UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 13333: ordinal
	not in range(128)

doublecmd-0.8.2-alt1
	Фатально: (1018) Компиляция прервана
	Error: /usr/bin/ppc386 returned an error exitcode
	Error: (lazarus) Compile Project, Mode: Beta, Target:
	/usr/src/RPM/BUILD/doublecmd-0.8.2/doublecmd: stopped with exit code 256
	Error: (lazbuild) failed compiling of project
	/usr/src/RPM/BUILD/doublecmd-0.8.2/src/doublecmd.lpi

emacs-mode-auctex-11.87-alt2
	Transcript written on mfput.log.
	grep: manfnt.log: No such file or directory
	mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input manfnt'
	failed to make manfnt.tfm.

fiaif-1.22.1-alt2
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

filibpp-3.0.2-alt1
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

gforth-0.7.3-alt2
	vmgen.texi:686: warning: @pxref node name should not contain `.'
	vmgen.texi:1613: warning: @pxref node name should not contain `.'
	cp -p kernl32l.fi kernl32l.fi~
	cp -p kernl32l.fi- kernl32l.fi
	cd doc; makeinfo --html gforth.texi
	cd doc; makeinfo --html vmgen.texi
	cd doc; texi2dvi gforth.texi
	/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
	log file
	make: *** [Makefile:939: doc/gforth.dvi] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/gforth-0.7.3'

gnuplot-1:5.0.3-alt1.2
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `pdftex.def' not found.
	Type X to quit or <RETURN> to proceed,

gpsbabel-1.3.6-alt2.qa1
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

libtomcrypt-1.18.0-alt1
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/color.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

libtommath-1.0.1.0.97.gitg0bc7551-alt1
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/color.cfg)
	! LaTeX Error: File `dvips.def' not found.
	Type X to quit or <RETURN> to proceed,

linuxdoc-tools-0.9.69-alt2
	Installed tree: /usr/src/tmp/linuxdoc-tools-buildroot/usr
	Using temporary directory: /usr/src/tmp/ldt.InRjnRSdx5
	- Building txt docs
	Processing file ./guide
	<standard input>:2254: warning [p 1, 226.3i]: can't break line
	- Building latex docs
	Processing file ./guide
	fmt_latex2e::postASP: LaTeX first run problem. Aborting ...
	make: *** [Makefile:116: install] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/linuxdoc-tools-0.9.69'

londonlaw-0.3.0-alt2_0.6.pre2
	</usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
	kpathsea: Running mktexpk --mfmode ljfour --bdpi 8000 --mag 1+760/(2*4000) --dpi
	8760 ptmr8r
	gsftopk: fatal: map file `psfonts.map' not found.
	mktexpk: don't know how to create bitmap font for ptmr8r.
	mktexpk: perhaps ptmr8r is missing from the map file.
	dvips: Font ptmr8r not found; using cmr10
	</usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
	dvips: ! invalid char 150 from font ptmr8r
	make: *** [Makefile:5: manual.ps] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/londonlaw-0.3.0_pre2/doc'

lordsawar-0.3.1-alt2
	bigmap.cpp: In destructor 'virtual BigMap::~BigMap()':
	bigmap.cpp:70:16: error: no match for 'operator==' (operand types are
	'Cairo::RefPtr<Cairo::Surface>' and 'bool')
	if (buffer == true)
	--
	rectangle.h:50:13: note:   no known conversion for argument 1 from
	'Cairo::RefPtr<Cairo::Surface>' to 'const Rectangle&'
	bigmap.cpp:73:26: error: no match for 'operator==' (operand types are
	'Cairo::RefPtr<Cairo::Surface>' and 'bool')
	if (magnified_buffer == true)
	--
	bigmap.cpp: In member function 'void BigMap::set_view(Rectangle)':
	bigmap.cpp:115:16: error: no match for 'operator==' (operand types are
	'Cairo::RefPtr<Cairo::Surface>' and 'bool')
	if (buffer == true)
	--
	rectangle.h:50:13: note:   no known conversion for argument 1 from
	'Cairo::RefPtr<Cairo::Surface>' to 'const Rectangle&'
	bigmap.cpp:125:18: error: no match for 'operator==' (operand types are
	'Cairo::RefPtr<Cairo::Surface>' and 'bool')
	if (outgoing == true)
	--
	bigmap.cpp: In member function 'void BigMap::draw(Player*, bool)':
	bigmap.cpp:177:23: error: no match for 'operator==' (operand types are
	'Cairo::RefPtr<Cairo::Surface>' and 'bool')
	if (magnified_buffer == true)

make-2:4.2.1-alt2
	Caught signal 14!
	FAILED (14/15 passed)
	features/override ....................................... ok	 (4 passed)

mydns-1.2.8.32-alt1
	~/RPM/BUILD/mydns-1.2.8.32/doc ~/RPM/BUILD/mydns-1.2.8.32
	+ make pdf
	make: Entering directory '/usr/src/RPM/BUILD/mydns-1.2.8.32/doc'
	TEXINPUTS=".:$TEXINPUTS" \
	MAKEINFO='makeinfo   -I .' \
	texi2dvi --pdf --batch	--build-dir=mydns.t2p -o mydns.pdf  \
	`test -f 'mydns.texi' || echo './'`mydns.texi
	/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
	log file
	make: *** [Makefile:474: mydns.pdf] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/mydns-1.2.8.32/doc'

ngsolve-6.1-alt1.dev.git20150323.qa1.2
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_31.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_32.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_33.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_34.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_35.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_36.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_37.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_38.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_39.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,
	try deleting the output directory and rerun doxygen.
	error: problems opening map file
	/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_40.map for inclusion in the docs!
	If you installed Graphviz/dot after a previous failing run,

python-module-fiat-1.6.0-alt1.dev.git20150429
	(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
	! LaTeX Error: File `pdftex.def' not found.
	Type X to quit or <RETURN> to proceed,

python-module-nbconvert-5.3.1-alt1
	E
	E	    ! LaTeX Error: File `load-unicode-data.tex' not found.
	E
	--
	>	    raise OSError(bytes_to_str(stderr))
	E	    OSError:
	/usr/src/RPM/BUILD/python-module-nbconvert-5.3.1/nbconvert/utils/pandoc.py:51:
	RuntimeWarning: You are using an old version of pandoc (1.11.1)
	E	    Recommended version is 1.12.1.

tinc-1.0.33-alt1
	~/RPM/BUILD/tinc-1.0.33/doc ~/RPM/BUILD/tinc-1.0.33
	+ make pdf
	make: Entering directory '/usr/src/RPM/BUILD/tinc-1.0.33/doc'
	TEXI2PDF tinc.pdf
	/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
	log file
	make: *** [Makefile:362: tinc.pdf] Error 1
	make: Leaving directory '/usr/src/RPM/BUILD/tinc-1.0.33/doc'
	error: Bad exit status from /usr/src/tmp/rpm-tmp.88450 (%build)
	RPM build errors:
	File /usr/src/RPM/SOURCES/tinc-1.0.33-alt1.patch is smaller than 8 bytes

	23 error logs REMOVED from the list
PokerTH-1.1.2-alt1
exim-4.84-alt1.1.1.1.1
ftpproxy-1.2.3-alt4
golang-github-xiang90-probing-0-alt1_0.6.git07dd2e8
kf5-kwin-5.11.5-alt1.S1
libmatemixer-1.20.0-alt1_1
libmateweather-1.20.0-alt1_1
mate-file-manager-actions-1.8.3-alt1_3
mate-panel-1:1.20.0-alt1_2
mate-window-manager-1.20.0-alt1_1
python-module-cinderclient-1:1.11.0-alt1
python-module-novaclient-7.1.2-alt1
python-module-pygame_sdl2-6.99.10.1227-alt2
python-module-scikits.eartho-0.2.1-alt2.git20141231.2
python-module-scikits.optimization-1:0.3-alt3.git20130417
python-module-scipy-1.0.0-alt1
python-module-xlib-0.18-alt1
python-module-yieldfrom.urllib3-0.1.4-alt1
qtcurve-1:1.8.18-alt1.git3d313d5
websec-1.9.0-alt1.1
xcftools-1.0.7-alt1.1
xen-4.10.0-alt4.S1
xymon-4.3.28-alt2

Total 517 error logs.


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2018-03-13 11:54 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-13 11:54 [cyber] I: Sisyphus-20180313 i586 beehive_status: +22 -23 (517) ALT beekeeper

ALT Linux Sisyphus cybertalk

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus-cybertalk/0 sisyphus-cybertalk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus-cybertalk sisyphus-cybertalk/ http://lore.altlinux.org/sisyphus-cybertalk \
		sisyphus-cybertalk@lists.altlinux.org sisyphus-cybertalk@lists.altlinux.ru sisyphus-cybertalk@lists.altlinux.com
	public-inbox-index sisyphus-cybertalk

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus-cybertalk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git