[Hardware] usb-flash & пропавшие разделы.

[Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

Всем привет!
Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С потерянной инфой 
чёрт с ней, есть архив. Дело в другом - на флэшке нет ни одного раздела и я 
ни как не могу их создать заново. В системе появляется устройство /dev/sdb, 
но к примеру gparted не видит данное устройство. Как исправить такое дело?
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

On Tuesday 27 January 2009 10:22:28 Alexandr Petukhov wrote:
> Алексей Шенцев пишет:
> > Всем привет!
> > Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С потерянной
> > инфой чёрт с ней, есть архив. Дело в другом - на флэшке нет ни одного
> > раздела и я ни как не могу их создать заново. В системе появляется
> > устройство /dev/sdb, но к примеру gparted не видит данное устройство. Как
> > исправить такое дело?
> И fdisk не видит?
Ни одна подобная программа не видит данное устройство.
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Hardware] usb-flash & пропавшие разделы.

[Alexandr Petukhov]

Алексей Шенцев пишет:
> Всем привет!
> Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С потерянной инфой 
> чёрт с ней, есть архив. Дело в другом - на флэшке нет ни одного раздела и я 
> ни как не могу их создать заново. В системе появляется устройство /dev/sdb, 
> но к примеру gparted не видит данное устройство. Как исправить такое дело?
>   
И fdisk не видит?

Re: [Hardware] usb-flash & пропавшие разделы.

[Шишков Евгений]

27.01.2009 10:18, Алексей Шенцев пишет:
>>> Всем привет!
>>> Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С потерянной
>>> инфой чёрт с ней, есть архив. Дело в другом - на флэшке нет ни одного
>>> раздела и я ни как не могу их создать заново. В системе появляется
>>> устройство /dev/sdb, но к примеру gparted не видит данное устройство. Как
>>> исправить такое дело?
>> И fdisk не видит?
> Ни одна подобная программа не видит данное устройство.

Флешкекапец. Если свет дернулся и сдохла флешка, то в помойку блок питания из компа.
Если флешка не гарантийная, то попробуй аккуратно вскрыть её. Возможно стабилизатор 
накрылся (который 3.3V на память делает).

Re: [Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

[-- Attachment #1: Type: text/plain, Size: 6166 bytes --]

On Tuesday 27 January 2009 10:30:03 Шишков Евгений wrote:
> Флешкекапец. 
Женя, не шути так :). Флэха гарантийная, 16Gb ...

> Если свет дернулся и сдохла флешка, то в помойку блок питания 
> из компа. 
Блок выжил (повезло). У нас промышленное предприятие. Тут как включится 
портальный кран, так такие броски напряжения, что ИБП выгорают вместе с 
компами ...

> Если флешка не гарантийная, то попробуй аккуратно вскрыть её. 
> Возможно стабилизатор накрылся (который 3.3V на память делает).
На флэшке горит индикатор. Когда её подключаю, то появляется устройство:
ls -l /dev/sdb*
brw-rw---- 1 root floppy 8, 16 Янв 27 10:23 /dev/sdb

dmesg выдаёт такое:

cat /tmp/sdb.log | grep sdb
sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Attached SCSI removable disk

и такое

cat /tmp/sdb.log | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb2: configuration #1 chosen from 1 choice
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb3: configuration #1 chosen from 1 choice
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb4: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb5: configuration #1 chosen from 1 choice
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=03f0, idProduct=0317
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: HP LaserJet 1200
usb 3-1: Manufacturer: HewLett Packard
usb 3-1: SerialNumber: 00CNBF295062
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb6: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb7: configuration #1 chosen from 1 choice
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=055f, idProduct=0006
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 
0x0317
usbcore: registered new interface driver usblp
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=058f, idProduct=6387
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: JetFlash
usb 1-3: SerialNumber: MZ3UAS9H
usbcore: registered new interface driver libusual
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
usb-storage: device scan complete
usb 1-3: USB disconnect, address 4
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-3: New USB device found, idVendor=058f, idProduct=1234
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Alcor Micro
usb-storage: device scan complete
usb 1-3: USB disconnect, address 5
usb 1-3: new high speed USB device using ehci_hcd and address 6
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=058f, idProduct=1234
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Alcor Micro
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete

Полный вывод dmesg см. вложение dmesg.log

udev отрабатывает, см. вложение udev.log


-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

[-- Attachment #2: udev.log --]
[-- Type: text/x-log, Size: 7439 bytes --]

UEVENT[1233040968.503230] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint)
UEVENT[1233040968.503263] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint)
UEVENT[1233040968.503281] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/bsg/5:0:0:0 (bsg)
UEVENT[1233040968.503296] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_generic/sg1 (scsi_generic)
UEVENT[1233040968.503313] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_device/5:0:0:0 (scsi_device)
UEVENT[1233040968.503327] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_disk/5:0:0:0 (scsi_disk)
UEVENT[1233040968.503341] remove   /devices/virtual/bdi/8:16 (bdi)
UEVENT[1233040968.503356] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/block/sdb (block)
UEVENT[1233040968.503375] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0 (scsi)
UEVENT[1233040968.503388] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0 (scsi)
UEVENT[1233040968.503399] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/scsi_host/host5 (scsi_host)
UEVENT[1233040968.503412] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5 (scsi)
UEVENT[1233040968.504182] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0 (usb)
UEVENT[1233040968.504197] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_endpoint/usbdev1.5_ep00 (usb_endpoint)
UEVENT[1233040968.504498] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_device/usbdev1.5 (usb_device)
UEVENT[1233040968.504549] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3 (usb)
UDEV  [1233040968.505122] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint)
UDEV  [1233040968.505258] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint)
UDEV  [1233040968.506138] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/bsg/5:0:0:0 (bsg)
UDEV  [1233040968.506634] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_generic/sg1 (scsi_generic)
UDEV  [1233040968.507056] remove   /devices/virtual/bdi/8:16 (bdi)
UDEV  [1233040968.507466] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_device/5:0:0:0 (scsi_device)
UDEV  [1233040968.507693] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/scsi_disk/5:0:0:0 (scsi_disk)
UDEV  [1233040968.508830] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0/block/sdb (block)
UDEV  [1233040968.510033] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0 (scsi)
UDEV  [1233040968.510920] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/target5:0:0 (scsi)
UDEV  [1233040968.512024] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5/scsi_host/host5 (scsi_host)
UDEV  [1233040968.513594] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_endpoint/usbdev1.5_ep00 (usb_endpoint)
UDEV  [1233040968.513646] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_device/usbdev1.5 (usb_device)
UDEV  [1233040968.514138] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host5 (scsi)
UDEV  [1233040968.515161] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0 (usb)
UDEV  [1233040968.516594] remove   /devices/pci0000:00/0000:00:12.2/usb1/1-3 (usb)
UEVENT[1233040995.294076] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3 (usb)
UEVENT[1233040995.294296] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0 (usb)
UEVENT[1233040995.294710] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6 (scsi)
UEVENT[1233040995.294777] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/scsi_host/host6 (scsi_host)
UEVENT[1233040995.295454] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint)
UEVENT[1233040995.295490] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint)
UEVENT[1233040995.295522] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_device/usbdev1.6 (usb_device)
UEVENT[1233040995.295547] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_endpoint/usbdev1.6_ep00 (usb_endpoint)
UDEV  [1233040995.323563] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3 (usb)
UDEV  [1233040995.337897] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0 (usb)
UDEV  [1233040995.339063] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6 (scsi)
UDEV  [1233040995.345513] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_endpoint/usbdev1.6_ep00 (usb_endpoint)
UDEV  [1233040995.345568] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/scsi_host/host6 (scsi_host)
UDEV  [1233040995.370345] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint)
UDEV  [1233040995.372739] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/usb_device/usbdev1.6 (usb_device)
UDEV  [1233040995.377901] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint)
UEVENT[1233041005.295252] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0 (scsi)
UEVENT[1233041005.295306] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UEVENT[1233041005.295333] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
UEVENT[1233041005.296663] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/block/sdb (block)
UDEV  [1233041005.296705] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0 (scsi)
UEVENT[1233041005.296730] add      /devices/virtual/bdi/8:16 (bdi)
UEVENT[1233041005.296752] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
UEVENT[1233041005.296778] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg1 (scsi_generic)
UEVENT[1233041005.296808] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
UDEV  [1233041005.297918] add      /devices/virtual/bdi/8:16 (bdi)
UDEV  [1233041005.301597] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UDEV  [1233041005.303252] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
UDEV  [1233041005.308085] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
UDEV  [1233041005.327918] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
UDEV  [1233041005.344825] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg1 (scsi_generic)
UDEV  [1233041005.350601] add      /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/block/sdb (block)

[-- Attachment #3: dmesg.log --]
[-- Type: text/x-log, Size: 34600 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-std-def-alt7 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt7) (GCC) ) #1 SMP Wed Dec 17 09:44:47 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
 BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
 BIOS-e820: 000000007ffae000 - 000000007ffd0000 (ACPI NVS)
 BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 10000-15000
RAMDISK: 00e61000 - 00eff1de
ACPI: RSDP 000FB500, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFA0100, 0054 (r1 070208 XSDT1653 20080702 MSFT       97)
ACPI: FACP 7FFA0290, 00F4 (r3 070208 FACP1653 20080702 MSFT       97)
ACPI: DSDT 7FFA05C0, 6EEB (r1  A0980 A0980001        1 INTL 20051117)
ACPI: FACS 7FFAE000, 0040
ACPI: APIC 7FFA0390, 006C (r1 070208 APIC1653 20080702 MSFT       97)
ACPI: MCFG 7FFA0400, 003C (r1 070208 OEMMCFG  20080702 MSFT       97)
ACPI: OEMB 7FFAE040, 0071 (r1 070208 OEMB1653 20080702 MSFT       97)
ACPI: HPET 7FFA74B0, 0038 (r1 070208 OEMHPET  20080702 MSFT       97)
ACPI: SSDT 7FFA74F0, 0544 (r1 A_M_I_ POWERNOW        1 AMD         1)
1151MB HIGHMEM available.
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00011000 - 00018000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000200000 - 00006b32c0]    TEXT DATA BSS ==> [0000200000 - 00006b32c0]
  #4 [0000e61000 - 0000eff1de]          RAMDISK ==> [0000e61000 - 0000eff1de]
  #5 [00006b4000 - 00006b7000]    INIT_PG_TABLE ==> [00006b4000 - 00006b7000]
  #6 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x0007ffa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x0007ffa0
On node 0 totalpages: 524078
free_area_init_node: node 0, pgdat c0580100, node_mem_map c1000240
  DMA zone: 3946 pages, LIFO batch:0
  Normal zone: 223300 pages, LIFO batch:31
  HighMem zone: 292224 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7f700000)
PERCPU: Allocating 38428 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519470
Kernel command line: auto BOOT_IMAGE=2627-std-def-7 ro root=802 panic=30 splash=silent resume=/dev/sda1
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 2200.875 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2070592k/2096768k available (2478k kernel code, 24912k reserved, 1192k data, 404k init, 1179264k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc059d000 - 0xc0602000   ( 404 kB)
      .data : 0xc046bac0 - 0xc0595d40   (1192 kB)
      .text : 0xc0200000 - 0xc046bac0   (2478 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.75 BogoMIPS (lpj=8803500)
Security Framework initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4401.98 BogoMIPS (lpj=8803975)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/2 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4401.85 BogoMIPS (lpj=8803715)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4401.89 BogoMIPS (lpj=8803781)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (17607.48 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 0 1 2 3
CPU1 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 1 2 3 0
CPU2 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 2 3 0 1
CPU3 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 3 0 1 2
net_namespace: 840 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
PCI: 0000:00:11.0 reg 10 io port: [c000, c007]
PCI: 0000:00:11.0 reg 14 io port: [b000, b003]
PCI: 0000:00:11.0 reg 18 io port: [a000, a007]
PCI: 0000:00:11.0 reg 1c io port: [9000, 9003]
PCI: 0000:00:11.0 reg 20 io port: [8000, 800f]
PCI: 0000:00:11.0 reg 24 32bit mmio: [f7fff800, f7fffbff]
pci 0000:00:11.0: set SATA to AHCI mode
PCI: 0000:00:12.0 reg 10 32bit mmio: [f7ffe000, f7ffefff]
PCI: 0000:00:12.1 reg 10 32bit mmio: [f7ffd000, f7ffdfff]
PCI: 0000:00:12.2 reg 10 32bit mmio: [f7fff000, f7fff0ff]
pci 0000:00:12.2: supports D1
pci 0000:00:12.2: supports D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
PCI: 0000:00:13.0 reg 10 32bit mmio: [f7ffc000, f7ffcfff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [f7ffb000, f7ffbfff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [f7ffa800, f7ffa8ff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.1 reg 10 io port: [0, 7]
PCI: 0000:00:14.1 reg 14 io port: [0, 3]
PCI: 0000:00:14.1 reg 18 io port: [0, 7]
PCI: 0000:00:14.1 reg 1c io port: [0, 3]
PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
PCI: 0000:00:14.2 reg 10 64bit mmio: [f7ff4000, f7ff7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:00:14.5 reg 10 32bit mmio: [f7ff9000, f7ff9fff]
PCI: 0000:01:00.0 reg 10 32bit mmio: [fa000000, faffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [f8000000, f9ffffff]
PCI: 0000:01:00.0 reg 24 io port: [dc00, dc7f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [fbee0000, fbefffff]
PCI: bridge 0000:00:02.0 io port: [d000, dfff]
PCI: bridge 0000:00:02.0 32bit mmio: [f8000000, fbefffff]
PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 io port: [e800, e8ff]
PCI: 0000:02:00.0 reg 18 64bit mmio: [fbfff000, fbffffff]
PCI: 0000:02:00.0 reg 20 64bit mmio: [f6ff0000, f6ffffff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [fbfc0000, fbfdffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:06.0 io port: [e000, efff]
PCI: bridge 0000:00:06.0 32bit mmio: [fbf00000, fbffffff]
PCI: bridge 0000:00:06.0 64bit mmio pref: [f6f00000, f6ffffff]
pci 0000:00:14.4: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 8A, should be 7D [20080609]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
ACPI: RTC can wake from S4
system 00:0c: ioport range 0x230-0x23f has been reserved
system 00:0c: ioport range 0x290-0x29f has been reserved
system 00:0c: ioport range 0xa20-0xa2f has been reserved
system 00:0c: ioport range 0xa30-0xa3f has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
system 00:0e: ioport range 0x40b-0x40b has been reserved
system 00:0e: ioport range 0x4d6-0x4d6 has been reserved
system 00:0e: ioport range 0xc00-0xc01 has been reserved
system 00:0e: ioport range 0xc14-0xc14 has been reserved
system 00:0e: ioport range 0xc50-0xc51 has been reserved
system 00:0e: ioport range 0xc52-0xc52 has been reserved
system 00:0e: ioport range 0xc6c-0xc6c has been reserved
system 00:0e: ioport range 0xc6f-0xc6f has been reserved
system 00:0e: ioport range 0xcd0-0xcd1 has been reserved
system 00:0e: ioport range 0xcd2-0xcd3 has been reserved
system 00:0e: ioport range 0xcd4-0xcd5 has been reserved
system 00:0e: ioport range 0xcd6-0xcd7 has been reserved
system 00:0e: ioport range 0xcd8-0xcdf has been reserved
system 00:0e: ioport range 0xb00-0xb3f has been reserved
system 00:0e: ioport range 0x800-0x89f has been reserved
system 00:0e: ioport range 0xb20-0xb2f has been reserved
system 00:0e: ioport range 0x900-0x90f has been reserved
system 00:0e: ioport range 0x910-0x91f has been reserved
system 00:0e: ioport range 0xfe00-0xfefe has been reserved
system 00:0e: iomem range 0xffb80000-0xffbfffff could not be reserved
system 00:0e: iomem range 0xfec10000-0xfec1001f has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff could not be reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
system 00:10: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0xd000-0xdfff
pci 0000:00:02.0:   MEM window: 0xf8000000-0xfbefffff
pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
pci 0000:00:06.0:   IO window: 0xe000-0xefff
pci 0000:00:06.0:   MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:06.0:   PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
pci 0000:00:14.4:   IO window: disabled
pci 0000:00:14.4:   MEM window: disabled
pci 0000:00:14.4:   PREFETCH window: disabled
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [d000, dfff]
bus: 01 index 1 mmio: [f8000000, fbefffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [e000, efff]
bus: 02 index 1 mmio: [fbf00000, fbffffff]
bus: 02 index 2 mmio: [f6f00000, f6ffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 io port: [0, ffff]
bus: 03 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...<7>Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 0
 it is
Freeing initrd memory: 632k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1232959177.536:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1743
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pci_express 0000:00:06.0:pcie00: allocate port service
vesafb: framebuffer at 0xf9000000, mapped to 0xf8880000, using 3750k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:b480
vesafb: pmi: set display start = c00cb4e3, set palette = c00cb53e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel text: 2480k
Write protecting the kernel read-only data: 996k
Executing init=/init
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07
    ide1: BM-DMA at 0xff08-0xff0f
Probing IDE interface ide0...
hdb: HL-DT-ST DVDRAM GSA-H44N, ATAPI CD/DVD-ROM drive
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fff900 irq 221
ata2: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fff980 irq 221
ata3: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fffa00 irq 221
ata4: SATA max UDMA/133 abar m1024@0xf7fff800 port 0xf7fffa80 irq 221
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: HPA detected: current 312579695, native 312581808
ata3.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312579695 512-byte hardware sectors (160041 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312579695 512-byte hardware sectors (160041 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
input: PC Speaker as /devices/platform/pcspkr/input/input2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
eth0: RTL8168c/8111c at 0xf8c9c000, 00:22:15:00:77:9f, XID 3c2000c0 IRQ 220
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
processor ACPI0007:01: registered as cooling_device1
processor ACPI0007:02: registered as cooling_device2
processor ACPI0007:03: registered as cooling_device3
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7ffa800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffd000
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
IT8712 SuperIO detected.
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
Error: Driver 'pcspkr' is already registered, aborting...
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffc000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=03f0, idProduct=0317
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: HP LaserJet 1200
usb 3-1: Manufacturer: HewLett Packard
usb 3-1: SerialNumber: 00CNBF295062
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffb000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ff9000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=055f, idProduct=0006
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
usbcore: registered new interface driver usblp
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
ppdev: user-space parallel port driver
Adding 4192924k swap on /dev/sda1.  Priority:-1 extents:1 across:4192924k
EXT3 FS on sda2, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2200 MHz)
powernow-k8:    1 : pstate 1 (1100 MHz)
r8169: eth0: link up
r8169: eth0: link up
it87: Found IT8712F chip at 0x290, revision 8
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
hwmon-vid: Unknown VRM version of your x86 CPU
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
cpufreqd[6242]: segfault at 1c ip b76641e6 sp bf8301d8 error 4 in libsysfs.so.2.0.1[b765f000+a000]
hda-intel: Invalid position buffer, using LPIB read method instead.
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=058f, idProduct=6387
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: JetFlash
usb 1-3: SerialNumber: MZ3UAS9H
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access     JetFlash Transcend 16GB   8.07 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
subfs 0.9
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
dvbrowse[2260]: segfault at 0 ip 00000000 sp bfbfecbc error 4 in dvbrowse[8048000+25000]
dvbrowse[2263]: segfault at b6bebe30 ip b6bebe30 sp bfa94a4c error 4 in KOI8-R.so[b6feb000+2000]
dvbrowse[2276]: segfault at b6c18e30 ip b6c18e30 sp bf8bf07c error 4 in KOI8-R.so[b7019000+2000]
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
usb 1-3: USB disconnect, address 4
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-3: New USB device found, idVendor=058f, idProduct=1234
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Alcor Micro
scsi 5:0:0:0: Direct-Access     Generic  USB Flash Disk   7.76 PQ: 0 ANSI: 2
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
debugfs[12846]: segfault at 10 ip 0804e236 sp bf975c80 error 4 in debugfs[8048000+11000]
debugfs[13040]: segfault at 10 ip 0804e236 sp bf85c360 error 4 in debugfs[8048000+11000]
usb 1-3: USB disconnect, address 5
usb 1-3: new high speed USB device using ehci_hcd and address 6
usb 1-3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb 1-3: New USB device found, idVendor=058f, idProduct=1234
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Alcor Micro
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access     Generic  USB Flash Disk   7.76 PQ: 0 ANSI: 2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete

Re: [Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

On Tuesday 27 January 2009 10:54:41 Andrey Rahmatullin wrote:
> On Tue, Jan 27, 2009 at 10:18:30AM +0300, Алексей Шенцев wrote:
> > > И fdisk не видит?
> > Ни одна подобная программа не видит данное устройство.
> В чём это выражается?
хотя бы в том, что для gparted'а нет устройства /dev/sdb
или вот такое:
[root@oasu3 /]# ls /dev/sd*
/dev/sda  /dev/sda1  /dev/sda2  /dev/sda3  /dev/sdb
[root@oasu3 /]# fdisk -l

Диск /dev/sda: 160.0 ГБ, 160040803840 байт
255 heads, 63 sectors/track, 19457 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000c7991

Устр-во Загр     Начало       Конец       Блоки   Id  Система
/dev/sda1   *           1         522     4192933+  82  Linux своп / Solaris
/dev/sda2             523        9989    76043677+  83  Linux
/dev/sda3            9990       19457    76051710   83  Linux
[root@oasu3 /]# testdisk /dev/sdb
TestDisk 6.9, Data Recovery Utility, February 2008
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Unable to open file or device /dev/sdb

Usage: testdisk [/log] [/debug] [file or device]
       testdisk /list  [/log]   [file or device]

/log          : create a testdisk.log file
/debug        : add debug information
/list         : display current partitions

TestDisk checks and recovers lost partitions
It works with :
- BeFS (BeOS)                           - BSD disklabel (Free/Open/Net BSD)
- CramFS, Compressed File System        - DOS/Windows FAT12, FAT16 and FAT32
- HFS, HFS+, Hierarchical File System   - JFS, IBM's Journaled File System
- Linux Ext2 and Ext3                   - Linux Raid
- Linux Swap                            - LVM, LVM2, Logical Volume Manager
- Netware NSS                           - NTFS (Windows NT/2K/XP/2003)
- ReiserFS 3.5, 3.6 and 4               - Sun Solaris i386 disklabel
- UFS and UFS2 (Sun/BSD/...)            - XFS, SGI's Journaled File System

If you have problems with TestDisk or bug reports, please contact me.
[root@oasu3 /]#
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Hardware] usb-flash & пропавшие разделы.

[Andrey Rahmatullin]

On Tue, Jan 27, 2009 at 10:18:30AM +0300, Алексей Шенцев wrote:
> > И fdisk не видит?
> Ни одна подобная программа не видит данное устройство.
В чём это выражается?

Re: [Hardware] usb-flash & пропавшие разделы.

[Andrey Rahmatullin]

On Tue, Jan 27, 2009 at 10:53:30AM +0300, Алексей Шенцев wrote:
> хотя бы в том, что для gparted'а нет устройства /dev/sdb
> или вот такое:
dd if=/dev/sdb bs=512 count=1|xxd

Re: [Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

On Tuesday 27 January 2009 11:09:08 Andrey Rahmatullin wrote:
> On Tue, Jan 27, 2009 at 10:53:30AM +0300, Алексей Шенцев wrote:
> > хотя бы в том, что для gparted'а нет устройства /dev/sdb
> > или вот такое:
> dd if=/dev/sdb bs=512 count=1|xxd
[root@oasu3 sdb]# dd if=/dev/sdb bs=512 count=1|xxd
dd: открытие `/dev/sdb': Носитель не найден
[root@oasu3 sdb]#
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Hardware] usb-flash & пропавшие разделы.

[Yuriy Kashirin]

On 27 января 2009, Алексей Шенцев wrote:
> On Tuesday 27 January 2009 10:22:28 Alexandr Petukhov wrote:
> > Алексей Шенцев пишет:
> > > Всем привет!
> > > Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С
> > > потерянной инфой чёрт с ней, есть архив. Дело в другом - на
> > > флэшке нет ни одного раздела и я ни как не могу их создать
> > > заново. В системе появляется устройство /dev/sdb, но к примеру
> > > gparted не видит данное устройство. Как исправить такое дело?
> >
> > И fdisk не видит?
>
> Ни одна подобная программа не видит данное устройство.

Буквально пару дней назад было такое у знакомого. Он восстановил 
флешку утилиткой от производителя.

-- 
 Best regards
 Yuriy Kashirin

Re: [Hardware] usb-flash & пропавшие разделы.

[Шишков Евгений]

27.01.2009 10:41, Алексей Шенцев пишет:
> On Tuesday 27 January 2009 10:30:03 Шишков Евгений wrote:
>> Флешкекапец.
> Женя, не шути так :). Флэха гарантийная, 16Gb ...

Попробуй тогда вот этим 
(http://rl-team.net/freeware/1146221650-jetflash-recovery-tool-1.0.19-vosstanovi-svoju.html). 
Правда винда понадобится.
Были случаи, когда восстанавливали этой прогой.

А нет - сам же писал, что данные не нужны - неси по гарантии.

Re: [Hardware] usb-flash & пропавшие разделы.

[Алексей Шенцев]

On Tuesday 27 January 2009 12:46:37 Шишков Евгений wrote:
> 27.01.2009 10:41, Алексей Шенцев пишет:
> > On Tuesday 27 January 2009 10:30:03 Шишков Евгений wrote:
> >> Флешкекапец.
> >
> > Женя, не шути так :). Флэха гарантийная, 16Gb ...
>
> Попробуй тогда вот этим
> (http://rl-team.net/freeware/1146221650-jetflash-recovery-tool-1.0.19-vosst
>anovi-svoju.html). Правда винда понадобится.
Пробывал ... устройство опознаётся. Но винда выдаёт: нет носителя.

> Были случаи, когда восстанавливали этой прогой.
> А нет - сам же писал, что данные не нужны - неси по гарантии.
Угу ... 
А другие средства оживления флэхи есть?
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Hardware] usb-flash & пропавшие разделы.

[Yuriy Kashirin]

On 27 января 2009, Алексей Шенцев wrote:
> On Tuesday 27 January 2009 12:46:37 Шишков Евгений wrote:
> > 27.01.2009 10:41, Алексей Шенцев пишет:
> > > On Tuesday 27 January 2009 10:30:03 Шишков Евгений wrote:
> > >> Флешкекапец.
> > >
> > > Женя, не шути так :). Флэха гарантийная, 16Gb ...
> >
> > Попробуй тогда вот этим
> > (http://rl-team.net/freeware/1146221650-jetflash-recovery-tool-1.
> >0.19-vosst anovi-svoju.html). Правда винда понадобится.
>
> Пробывал ... устройство опознаётся. Но винда выдаёт: нет носителя.
>
> > Были случаи, когда восстанавливали этой прогой.
> > А нет - сам же писал, что данные не нужны - неси по гарантии.
>
> Угу ...
> А другие средства оживления флэхи есть?

Недавно помогло отсюда:
http://flashboot.ru/index.php?name=News&op=article&sid=22

-- 
 Best regards
 Yuriy Kashirin

Re: [Hardware] usb-flash & пропавшие разделы.

[Vladimir A. Svyatoshenko]

On Tue, 27 Jan 2009 10:18:30 +0300
Алексей Шенцев wrote:

> On Tuesday 27 January 2009 10:22:28 Alexandr Petukhov wrote:
> > Алексей Шенцев пишет:
> > > Всем привет!
> > > Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С
> > > потерянной инфой чёрт с ней, есть архив. Дело в другом - на
> > > флэшке нет ни одного раздела и я ни как не могу их создать
> > > заново. В системе появляется устройство /dev/sdb, но к примеру
> > > gparted не видит данное устройство. Как исправить такое дело?
> > И fdisk не видит?
> Ни одна подобная программа не видит данное устройство.
"gparted /dev/sdb" из консоли 

Re: [Hardware] usb-flash & пропавшие разделы.

[Andrey Rahmatullin]

[-- Attachment #1: Type: text/plain, Size: 460 bytes --]

On Sat, Jan 31, 2009 at 02:33:04AM +0200, Vladimir A. Svyatoshenko wrote:
> > > > gparted не видит данное устройство
> "gparted /dev/sdb" из консоли 

-- 
WBR, wRAR (ALT Linux Team)
Powered by the ALT Linux fortune(8):

> Это по окончании работы нашего робота.  В некоторых случаях мог
> бы справиться более интеллектуальный робот,
Этот самый более интеллектуальный робот попробует этой ночью
исправить следующие пакеты:
[...]
		-- ldv in devel@

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [Hardware] usb-flash & пропавшие разделы.

[nemo61]

On Tuesday 27 January 2009 09:43:39 Алексей Шенцев wrote:
> Всем привет!
> Вчера у меня свет "дёрнулся" т на флэшке пропали разделы. С потерянной
> инфой чёрт с ней, есть архив. Дело в другом - на флэшке нет ни одного
> раздела и я ни как не могу их создать заново. В системе появляется
> устройство /dev/sdb, но к примеру gparted не видит данное устройство. Как
> исправить такое дело?

Посмотрите здесь.
http://usb-disk.ru/prog.php