ALT Linux hardware support
 help / color / mirror / Atom feed
* [Hardware] USB printer problem
@ 2006-04-27  6:10 Alexander Volkov
  2006-04-27  9:33 ` Michael Shigorin
  0 siblings, 1 reply; 2+ messages in thread
From: Alexander Volkov @ 2006-04-27  6:10 UTC (permalink / raw)
  To: hardware

Приветствую всех!
Попытался подключить на С3.0 HP LaserJet1022, так эта сволочь работать не
желает:
usb 1-2: new high speed USB device using ehci_hcd and address 13
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
и в /proc/usb/devices его нет :(

Чипсет viaK8M800


--
 Regards, Alexander



^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Hardware] USB printer problem
  2006-04-27  6:10 [Hardware] USB printer problem Alexander Volkov
@ 2006-04-27  9:33 ` Michael Shigorin
  0 siblings, 0 replies; 2+ messages in thread
From: Michael Shigorin @ 2006-04-27  9:33 UTC (permalink / raw)
  To: hardware

On Thu, Apr 27, 2006 at 10:10:22AM +0400, Alexander Volkov wrote:
> Попытался подключить на С3.0 HP LaserJet1022, так эта сволочь
> работать не желает:
> usb 1-2: new high speed USB device using ehci_hcd and address 13
> usb 1-2: device descriptor read/64, error -71
> usb 1-2: device descriptor read/64, error -71
> и в /proc/usb/devices его нет :(
> Чипсет viaK8M800

Будто похоже на кривой кабель/контроллер/дривер USB2, попробуйте
выгрузить кого-то из uhci/ohci/ehci_hcd.

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2006-04-27  9:33 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-04-27  6:10 [Hardware] USB printer problem Alexander Volkov
2006-04-27  9:33 ` Michael Shigorin

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git