ALT Linux hardware support
 help / color / mirror / Atom feed
* [Hardware] настройка принтера HP3550
@ 2005-12-06 18:40 Подорожный Сергей
  0 siblings, 0 replies; only message in thread
From: Подорожный Сергей @ 2005-12-06 18:40 UTC (permalink / raw)
  To: hardware

Доброго времени суток! Имеется принтер HP 3550  в Windows-е работает без 
проблем, но так как больше нужен под ALM 2.4, пробовал настроить и через 
foomatic,  и  через CUPS, а также с помощью утилиты KDEprint. Без 
результатов, система вроде видит принтер, но говорит, что он не настроеный?
Вот что выдает команда #/usr/sbin/ptal-init setup:
Probe for USB-connected devices ([y]/n)?  y

Probing "/dev/usb/lp0"...
    *** Found "deskjet 3500" but failed to communicate with it!
    *** Elapsed time for this attempt was 0 second(s).
    *** Check syslog file for ptal-mlcd error messages.
    *** See hpoj documentation for troubleshooting information.

Probing "/dev/usb/lp1"...
    No device found.

Probing "/dev/usb/lp10"...
    No device found.

Probing "/dev/usb/lp11"...
    No device found.

Probing "/dev/usb/lp12"...
    No device found.

Probing "/dev/usb/lp13"...
    No device found.

Probing "/dev/usb/lp14"...
    No device found.

Probing "/dev/usb/lp15"...
    No device found.

Probing "/dev/usb/lp2"...
    No device found.

Probing "/dev/usb/lp3"...
    No device found.

Probing "/dev/usb/lp4"...
    No device found.

Probing "/dev/usb/lp5"...
    No device found.


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2005-12-06 18:40 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-12-06 18:40 [Hardware] настройка принтера HP3550 Подорожный Сергей

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git