* [Hardware] [branche-3.0] hotplug (cpu.rc) error
@ 2005-09-15 10:21 Evgeny Yugov
2005-09-15 10:37 ` [Hardware] " Anton Farygin
0 siblings, 1 reply; 3+ messages in thread
From: Evgeny Yugov @ 2005-09-15 10:21 UTC (permalink / raw)
To: sisyphus; +Cc: hardware
Здравствуйте, sisyphus.
Ноутбук ASUS M6BNe, при старте:
Hotplug (cpu.rc) start: Error inserting '/lib/modules/2.6.12-std26-up-alt3/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko' -1 No such device
как егоное победить?
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Hardware] Re: [branche-3.0] hotplug (cpu.rc) error
2005-09-15 10:21 [Hardware] [branche-3.0] hotplug (cpu.rc) error Evgeny Yugov
@ 2005-09-15 10:37 ` Anton Farygin
2005-09-16 1:46 ` [Hardware] " Evgeny Yugov
0 siblings, 1 reply; 3+ messages in thread
From: Anton Farygin @ 2005-09-15 10:37 UTC (permalink / raw)
To: hardware; +Cc: sisyphus
On Thu, 15 Sep 2005 17:21:06 +0700, Evgeny Yugov wrote:
> Здравствуйте, sisyphus.
>
> Ноутбук ASUS M6BNe, при старте: Hotplug (cpu.rc) start:
> Error inserting
> '/lib/modules/2.6.12-std26-up-alt3/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko'
> -1 No such device как егоное победить?
А хоть какой-то модуль грузится ? что в логах ядра ?
Rgds,
Rider
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Hardware] [branche-3.0] hotplug (cpu.rc) error
2005-09-15 10:37 ` [Hardware] " Anton Farygin
@ 2005-09-16 1:46 ` Evgeny Yugov
0 siblings, 0 replies; 3+ messages in thread
From: Evgeny Yugov @ 2005-09-16 1:46 UTC (permalink / raw)
To: hardware
Здравствуйте, Anton.
Вы писали 15 сентября 2005 г., 17:37:00:
> On Thu, 15 Sep 2005 17:21:06 +0700, Evgeny Yugov wrote:
>> Здравствуйте, sisyphus.
>>
>> Ноутбук ASUS M6BNe, при старте: Hotplug (cpu.rc) start:
>> Error inserting
>> '/lib/modules/2.6.12-std26-up-alt3/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko'
>> -1 No such device как егоное победить?
> А хоть какой-то модуль грузится ? что в логах ядра ?
В логах рядом:
...
Aug 19 20:42:29 zillah cpu.rc: Error inserting '/lib/modules/2.6.12-std26-up-alt3/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko': -1 No such device
Aug 19 20:42:29 zillah cpu.rc: insmod:
Aug 19 20:42:29 zillah cpu.rc: insmod /lib/modules/2.6.12-std26-up-alt3/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko failed
Aug 19 20:42:30 zillah cpu.rc: insmod:
Aug 19 20:42:30 zillah cpu.rc: insmod acpi failed
Aug 19 20:42:30 zillah hotplug: Hotplug (cpu.rc) start: failed
Aug 19 20:42:30 zillah hal.hotplug[2737]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:28 zillah lisa: lisa startup succeeded
Aug 19 20:42:31 zillah hotplug: Hotplug (sound.rc) start: succeeded
Aug 19 20:42:31 zillah sound.dev[3108]: Restore mixer values for /class/sound/controlC0 (0)
Aug 19 20:42:32 zillah hotplug: Hotplug (usb.rc) start: succeeded
Aug 19 20:42:35 zillah pnp.rc[3354]: missing kernel or user mode driver atkbd
Aug 19 20:42:36 zillah hotplug: Hotplug (pnp.rc) start: succeeded
Aug 19 20:42:36 zillah hal.hotplug[4151]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4230]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4295]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4327]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4359]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4391]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah hal.hotplug[4423]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:36 zillah insmod: insmod: insmod hw_random failed
Aug 19 20:42:36 zillah pci.agent[4424]: ... can't load module hw_random
Aug 19 20:42:36 zillah pci.agent[4424]: missing kernel or user mode driver hw_random
Aug 19 20:42:36 zillah hal.hotplug[4481]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4517]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4549]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4621]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4659]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4712]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4757]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:37 zillah hal.hotplug[4816]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:38 zillah hal.hotplug[4978]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:38 zillah hal.hotplug[5010]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:38 zillah hal.hotplug[5075]: DEVPATH is not set (subsystem pci)
Aug 19 20:42:38 zillah ieee1394.agent[5095]: ... no drivers for IEEE1394 product 0x/0x/0x
...
после старта системы:
[root@zillah cpufreq]# service hotplug status
Hotplug (cpu.rc) status: [ DONE ]
Hotplug (sound.rc) status: [ DONE ]
Hotplug (usb.rc) status: [ DONE ]
Hotplug (pnp.rc) status: [ DONE ]
Hotplug (pci.rc) status: [ DONE ]
Hotplug (misc.rc) status: [ DONE ]
Hotplug (block.rc) status: [ DONE ]
Hotplug (acpi.rc) status: [ DONE ]
[root@zillah cpufreq]#
[root@zillah cpufreq]# lsmod
Module Size Used by
thermal 13192 0
processor 22324 1 thermal
button 6800 0
battery 9604 0
ide_cd 39684 0
cdrom 37536 1 ide_cd
ipw2200 164616 0
firmware_class 9984 1 ipw2200
ieee80211 45636 1 ipw2200
ieee80211_crypt 6020 2 ipw2200,ieee80211
ohci1394 32948 0
ieee1394 97720 1 ohci1394
yenta_socket 22152 0
af_packet 21640 2
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 48260 2 yenta_socket,rsrc_nonstatic
tg3 91652 0
slamr 408136 2
i2c_i801 8844 0
i2c_core 21008 1 i2c_i801
shpchp 90212 0
pci_hotplug 26804 1 shpchp
intel_agp 22428 1
agpgart 34248 1 intel_agp
parport_pc 38468 0
parport 33864 1 parport_pc
pcspkr 3652 0
psmouse 35844 0
evdev 9344 0
usbhid 33760 0
uhci_hcd 30864 0
ehci_hcd 32904 0
usbcore 114012 4 usbhid,uhci_hcd,ehci_hcd
snd_intel8x0 32192 0
snd_ac97_codec 77436 1 snd_intel8x0
snd_pcm_oss 51744 0
snd_seq_dummy 3972 0
snd_seq_oss 33024 0
snd_seq_midi_event 7040 1 snd_seq_oss
snd_seq 49296 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8716 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss 18048 1 snd_pcm_oss
snd_pcm 85384 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 23812 2 snd_seq,snd_pcm
snd 53636 10 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 9860 2 snd_intel8x0,snd_pcm
subfs 7680 1
dm_mod 55868 1
rtc 12216 0
ext3 127880 6
jbd 52760 1 ext3
mbcache 9476 1 ext3
ide_disk 17024 8
ide_generic 1408 0 [permanent]
piix 10244 0 [permanent]
ide_core 120856 4 ide_cd,ide_disk,ide_generic,piix
--
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-09-16 1:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-09-15 10:21 [Hardware] [branche-3.0] hotplug (cpu.rc) error Evgeny Yugov
2005-09-15 10:37 ` [Hardware] " Anton Farygin
2005-09-16 1:46 ` [Hardware] " Evgeny Yugov
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git