ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Поднять USB
@ 2006-07-18 15:07 odergimiy
  2006-07-18 17:42 ` quakeR
  0 siblings, 1 reply; 10+ messages in thread
From: odergimiy @ 2006-07-18 15:07 UTC (permalink / raw)
  To: ALT Linux Community

Здравствуйте уважаемые участники рассылки.

Система Alt Master 2.4 из коробки.
После смены матери отвалилось USB.
Как поднять ?

lspci говорит
00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4347 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4348 (rev 01)
00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4345 (rev 01)

Как поднять ?
Желательно без установки ядра 2.6.х


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 15:07 [Comm] Поднять USB odergimiy
@ 2006-07-18 17:42 ` quakeR
  2006-07-18 18:05   ` odergimiy
  0 siblings, 1 reply; 10+ messages in thread
From: quakeR @ 2006-07-18 17:42 UTC (permalink / raw)
  To: ALT Linux Community

Какая мать, чипсет?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 17:42 ` quakeR
@ 2006-07-18 18:05   ` odergimiy
  2006-07-18 18:49     ` Хихин Руслан
  0 siblings, 1 reply; 10+ messages in thread
From: odergimiy @ 2006-07-18 18:05 UTC (permalink / raw)
  To: ALT Linux Community

quakeR пишет:

>Какая мать, чипсет?
>
>  
>

мать Asus P4R800VM
чипсет Ati


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 18:05   ` odergimiy
@ 2006-07-18 18:49     ` Хихин Руслан
  2006-07-18 20:09       ` odergimiy
  0 siblings, 1 reply; 10+ messages in thread
From: Хихин Руслан @ 2006-07-18 18:49 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 475 bytes --]

Здравствуйте odergimiy
  В сообщении от 18 июля 2006 22:05 odergimiy написал(a):
 > quakeR пишет:
 > >Какая мать, чипсет?
 >
 > мать Asus P4R800VM
 >
 > чипсет Ati
modprobe ehci-hcd
dmesg
modprobe usb-uhci
dmesg
modprobe usb-ohci
dmesg
?

-- 
  А ещё говорят так  (fortune):
 
Любовь, а не немецкая философия служит объяснением этого мира.
		-- Оскар Уайльд
________________________________________________________________________
С уважением Хихин Руслан (hihin@rambler.ru)

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 18:49     ` Хихин Руслан
@ 2006-07-18 20:09       ` odergimiy
  2006-07-18 22:43         ` Хихин Руслан
  0 siblings, 1 reply; 10+ messages in thread
From: odergimiy @ 2006-07-18 20:09 UTC (permalink / raw)
  To: hihin, ALT Linux Community

Хихин Руслан пишет:

>Здравствуйте odergimiy
>  В сообщении от 18 июля 2006 22:05 odergimiy написал(a):
> > quakeR пишет:
> > >Какая мать, чипсет?
> >
> > мать Asus P4R800VM
> >
> > чипсет Ati
>  
>
Заранее извеняюсь, скидываю полный dmesg  дабы не упустить чего то важного.

[root@localhost scorp]# modprobe ehci-hcd
[root@localhost scorp]# dmesg
 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-22, 1-23 not 
connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2394.4979 MHz.
..... host bus clock speed is 99.7705 MHz.
cpu: 0, clocks: 997705, slice: 498852
CPU0<T0:997696,T1:498832,D:12,S:498852,C:997705>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
    ACPI-1132: *** Error: Method execution failed [\GPRW] (Node 
c154da60), AE_NOT_EXIST
    ACPI-1132: *** Error: Method execution failed 
[\_SB_.PCI0.SBRG.UAR1._PRW] (Node c1550dc0), AE_NOT_EXIST
    ACPI-0153: *** Error: Method execution failed 
[\_SB_.PCI0.SBRG.UAR1._PRW] (Node c1550dc0), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:14.1
Transparent bridge - PCI device 1002:4342 (ATI Technologies Inc)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
PCI: Probing PCI hardware
00:00:14[A] -> 1-16 -> IRQ 16 level low
00:00:14[B] -> 1-17 -> IRQ 17 level low
00:00:13[A] -> 1-19 -> IRQ 19 level low
00:02:08[A] -> 1-18 -> IRQ 18 level low
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
.......    : physical APIC id: 01
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 01000000
.......     : arbitration: 01
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    B9
 12 001 01  1    1    0   1   0    1    1    C9
 13 001 01  1    1    0   1   0    1    1    C1
 14 000 00  1    0    0   0   0    0    0    00
 15 001 01  0    1    0   1   0    1    1    A9
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:534b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 68332 bytes, v2).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 00:14.1
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120022A, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, 
UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 > hda3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 166k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
NTFS driver 2.1.6b [Flags: R/O MODULE].
NTFS-fs warning (device 03:01): parse_options(): Option iocharset is 
deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option 
codepage.
subfs: subfs-2.4 version 0.9.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcbb0000
usb.c: new USB bus registered, assigned bus number 3
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: USB disconnect on device 00:13.0-0 address 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:13.1-0 address 1
usb.c: USB bus 2 deregistered
ehci_hcd 00:13.2: remove state 3
usb.c: USB disconnect on device 00:13.2-0 address 1
usb.c: USB bus 3 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
inserting floppy driver for 2.4.26-std-up-alt6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcc83000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
/dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1949]: Module vmmon: initialized
slmdm: version 2.7.10 Feb  4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Smart Link AMRMO modem.
/dev/vmnet: open called by PID 1976 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 2004 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
divert: allocating divert_blk for vmnet1
/dev/vmnet: open called by PID 2005 (vmnet-netifup)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
divert: allocating divert_blk for vmnet8
/dev/vmnet: open called by PID 2003 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2031 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 11 changed to on
SCSI subsystem driver Revision: 1.00
/dev/vmnet: open called by PID 2291 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[2301]: host clock rate change request 0 -> 19
/dev/vmmon[2301]: host clock rate change request 19 -> 83
Loading Lucent Modem Controller driver version 8.26
Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0
Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ 
enabled
ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[2291]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000
vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000
/dev/vmnet: open called by PID 3019 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[3034]: host clock rate change request 0 -> 19
/dev/vmmon[3034]: host clock rate change request 19 -> 83
/dev/vmmon[3019]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000
vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
hdc: attached ide-cdrom driver.
hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
/dev/vmnet: open called by PID 4324 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[4334]: host clock rate change request 0 -> 19
/dev/vmmon[4334]: host clock rate change request 19 -> 83
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[4324]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000
vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0

[root@localhost scorp]# modprobe usb-uhci
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: 
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: 
insmod 
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o failed
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: 
insmod usb-uhci failed
[root@localhost scorp]# dmesg
I0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:14.1
Transparent bridge - PCI device 1002:4342 (ATI Technologies Inc)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
PCI: Probing PCI hardware
00:00:14[A] -> 1-16 -> IRQ 16 level low
00:00:14[B] -> 1-17 -> IRQ 17 level low
00:00:13[A] -> 1-19 -> IRQ 19 level low
00:02:08[A] -> 1-18 -> IRQ 18 level low
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
.......    : physical APIC id: 01
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 01000000
.......     : arbitration: 01
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    B9
 12 001 01  1    1    0   1   0    1    1    C9
 13 001 01  1    1    0   1   0    1    1    C1
 14 000 00  1    0    0   0   0    0    0    00
 15 001 01  0    1    0   1   0    1    1    A9
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:534b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 68332 bytes, v2).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 00:14.1
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120022A, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, 
UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 > hda3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 166k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
NTFS driver 2.1.6b [Flags: R/O MODULE].
NTFS-fs warning (device 03:01): parse_options(): Option iocharset is 
deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option 
codepage.
subfs: subfs-2.4 version 0.9.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcbb0000
usb.c: new USB bus registered, assigned bus number 3
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: USB disconnect on device 00:13.0-0 address 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:13.1-0 address 1
usb.c: USB bus 2 deregistered
ehci_hcd 00:13.2: remove state 3
usb.c: USB disconnect on device 00:13.2-0 address 1
usb.c: USB bus 3 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
inserting floppy driver for 2.4.26-std-up-alt6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcc83000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
/dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1949]: Module vmmon: initialized
slmdm: version 2.7.10 Feb  4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Smart Link AMRMO modem.
/dev/vmnet: open called by PID 1976 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 2004 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
divert: allocating divert_blk for vmnet1
/dev/vmnet: open called by PID 2005 (vmnet-netifup)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
divert: allocating divert_blk for vmnet8
/dev/vmnet: open called by PID 2003 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2031 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 11 changed to on
SCSI subsystem driver Revision: 1.00
/dev/vmnet: open called by PID 2291 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[2301]: host clock rate change request 0 -> 19
/dev/vmmon[2301]: host clock rate change request 19 -> 83
Loading Lucent Modem Controller driver version 8.26
Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0
Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ 
enabled
ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[2291]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000
vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000
/dev/vmnet: open called by PID 3019 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[3034]: host clock rate change request 0 -> 19
/dev/vmmon[3034]: host clock rate change request 19 -> 83
/dev/vmmon[3019]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000
vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
hdc: attached ide-cdrom driver.
hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
/dev/vmnet: open called by PID 4324 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[4334]: host clock rate change request 0 -> 19
/dev/vmmon[4334]: host clock rate change request 19 -> 83
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[4324]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000
vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
hub.c: new USB device 00:13.2-4, assigned address 2
usb.c: USB device not accepting new address=2 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 3
usb.c: USB device not accepting new address=3 (error=-71)
/dev/vmnet: open called by PID 4808 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[4818]: host clock rate change request 0 -> 19
/dev/vmmon[4818]: host clock rate change request 19 -> 83
hub.c: new USB device 00:13.2-4, assigned address 4
usb.c: USB device not accepting new address=4 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 5
usb.c: USB device not accepting new address=5 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 6
usb.c: USB device not accepting new address=6 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 7
usb.c: USB device not accepting new address=7 (error=-71)
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:13.2-1, assigned address 8
usb.c: USB device not accepting new address=8 (error=-71)
hub.c: new USB device 00:13.2-1, assigned address 9
usb.c: USB device not accepting new address=9 (error=-71)
hub.c: new USB device 00:13.2-2, assigned address 10
usb.c: USB device not accepting new address=10 (error=-71)
hub.c: new USB device 00:13.2-2, assigned address 11
usb.c: USB device not accepting new address=11 (error=-71)
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug  3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:13.2-1, assigned address 12
usb.c: USB device not accepting new address=12 (error=-71)
hub.c: new USB device 00:13.2-1, assigned address 13
usb.c: USB device not accepting new address=13 (error=-71)
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug  3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver


[root@localhost scorp]# modprobe usb-ohci
[root@localhost scorp]# dmesg
 Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
PCI: Probing PCI hardware
00:00:14[A] -> 1-16 -> IRQ 16 level low
00:00:14[B] -> 1-17 -> IRQ 17 level low
00:00:13[A] -> 1-19 -> IRQ 19 level low
00:02:08[A] -> 1-18 -> IRQ 18 level low
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
.......    : physical APIC id: 01
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 01000000
.......     : arbitration: 01
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    B9
 12 001 01  1    1    0   1   0    1    1    C9
 13 001 01  1    1    0   1   0    1    1    C1
 14 000 00  1    0    0   0   0    0    0    00
 15 001 01  0    1    0   1   0    1    1    A9
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:534b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 68332 bytes, v2).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 00:14.1
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120022A, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, 
UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 > hda3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 166k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
NTFS driver 2.1.6b [Flags: R/O MODULE].
NTFS-fs warning (device 03:01): parse_options(): Option iocharset is 
deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option 
codepage.
subfs: subfs-2.4 version 0.9.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcbb0000
usb.c: new USB bus registered, assigned bus number 3
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: USB disconnect on device 00:13.0-0 address 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:13.1-0 address 1
usb.c: USB bus 2 deregistered
ehci_hcd 00:13.2: remove state 3
usb.c: USB disconnect on device 00:13.2-0 address 1
usb.c: USB bus 3 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
inserting floppy driver for 2.4.26-std-up-alt6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
ehci_hcd 00:13.2: irq 19, pci mem dcc83000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19
usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19
usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
/dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1949]: Module vmmon: initialized
slmdm: version 2.7.10 Feb  4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Smart Link AMRMO modem.
/dev/vmnet: open called by PID 1976 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 2004 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
divert: allocating divert_blk for vmnet1
/dev/vmnet: open called by PID 2005 (vmnet-netifup)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
divert: allocating divert_blk for vmnet8
/dev/vmnet: open called by PID 2003 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2031 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 11 changed to on
SCSI subsystem driver Revision: 1.00
/dev/vmnet: open called by PID 2291 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[2301]: host clock rate change request 0 -> 19
/dev/vmmon[2301]: host clock rate change request 19 -> 83
Loading Lucent Modem Controller driver version 8.26
Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0
Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ 
enabled
ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[2291]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000
vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000
/dev/vmnet: open called by PID 3019 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[3034]: host clock rate change request 0 -> 19
/dev/vmmon[3034]: host clock rate change request 19 -> 83
/dev/vmmon[3019]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000
vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
hdc: attached ide-cdrom driver.
hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
/dev/vmnet: open called by PID 4324 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[4334]: host clock rate change request 0 -> 19
/dev/vmmon[4334]: host clock rate change request 19 -> 83
divert: not allocating divert_blk for non-ethernet device ppp0
/dev/vmmon[4324]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000
vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
hub.c: new USB device 00:13.2-4, assigned address 2
usb.c: USB device not accepting new address=2 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 3
usb.c: USB device not accepting new address=3 (error=-71)
/dev/vmnet: open called by PID 4808 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[4818]: host clock rate change request 0 -> 19
/dev/vmmon[4818]: host clock rate change request 19 -> 83
hub.c: new USB device 00:13.2-4, assigned address 4
usb.c: USB device not accepting new address=4 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 5
usb.c: USB device not accepting new address=5 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 6
usb.c: USB device not accepting new address=6 (error=-71)
hub.c: new USB device 00:13.2-4, assigned address 7
usb.c: USB device not accepting new address=7 (error=-71)
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:13.2-1, assigned address 8
usb.c: USB device not accepting new address=8 (error=-71)
hub.c: new USB device 00:13.2-1, assigned address 9
usb.c: USB device not accepting new address=9 (error=-71)
hub.c: new USB device 00:13.2-2, assigned address 10
usb.c: USB device not accepting new address=10 (error=-71)
hub.c: new USB device 00:13.2-2, assigned address 11
usb.c: USB device not accepting new address=11 (error=-71)
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug  3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:13.2-1, assigned address 12
usb.c: USB device not accepting new address=12 (error=-71)
hub.c: new USB device 00:13.2-1, assigned address 13
usb.c: USB device not accepting new address=13 (error=-71)
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug  3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
/dev/vmmon[4808]: host clock rate change request 83 -> 0
vmmon: Had to deallocate locked 12300 pages from vm driver c5645000
vmmon: Had to deallocate AWE 2821 pages from vm driver c5645000

Вот.


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 20:09       ` odergimiy
@ 2006-07-18 22:43         ` Хихин Руслан
  2006-07-19 13:56           ` odergimiy
  2006-07-19 15:58           ` odergimiy
  0 siblings, 2 replies; 10+ messages in thread
From: Хихин Руслан @ 2006-07-18 22:43 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 1584 bytes --]

Здравствуйте odergimiy
  В сообщении от 19 июля 2006 00:09 odergimiy написал(a):
 > usb.c: registered new driver usbdevfs
 >
 > usb.c: registered new driver hub
 >
 > ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc)
 >
 > ehci_hcd 00:13.2: irq 19, pci mem dcc83000
 >
 > usb.c: new USB bus registered, assigned bus number 1
 >
 > ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
 >
 > hub.c: USB hub found
 >
 > hub.c: 6 ports detected
 >
 > usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19
 >
 > usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
 >
 > usb.c: new USB bus registered, assigned bus number 2
 >
 > hub.c: USB hub found
 >
 > hub.c: 3 ports detected
 >
 > usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19
 >
 > usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc)
 >
 > usb.c: new USB bus registered, assigned bus number 3
 >
 > hub.c: USB hub found
 >
 > hub.c: 3 ports detected
 >
 > usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc)
 >
 > usb.c: new USB bus registered, assigned bus number 2

Как Вы видете сами у вас  "USB OHCI" для поддержки usb-2 надо еще 
загружать ehci-cd
Итого прописать в modules
usb-ohci
и
ehci-hcd
 
-- 
  А ещё говорят так  (fortune):
 
Русские программисты программируют на всех уровнях, начиная с команд 
процессора,
табличка которых всегда находится где-то под рукой. Они обычно помнят 
наизусть
список функций прерывания Int21H.
________________________________________________________________________
С уважением Хихин Руслан (hihin@rambler.ru)

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 22:43         ` Хихин Руслан
@ 2006-07-19 13:56           ` odergimiy
  2006-07-20  4:43             ` Хихин Руслан
  2006-07-19 15:58           ` odergimiy
  1 sibling, 1 reply; 10+ messages in thread
From: odergimiy @ 2006-07-19 13:56 UTC (permalink / raw)
  To: hihin, ALT Linux Community

Хихин Руслан пишет:

>Как Вы видете сами у вас  "USB OHCI" для поддержки usb-2 надо еще 
>загружать ehci-cd
>Итого прописать в modules
>usb-ohci
>и
>ehci-hcd
> 
>  
>
>------------------------------------------------------------------------
>
Прописал, но всеравно неработает.
:(
В чем может быть еще загвоздка ?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-18 22:43         ` Хихин Руслан
  2006-07-19 13:56           ` odergimiy
@ 2006-07-19 15:58           ` odergimiy
  1 sibling, 0 replies; 10+ messages in thread
From: odergimiy @ 2006-07-19 15:58 UTC (permalink / raw)
  To: hihin, ALT Linux Community

Кстати заглянул в центр KDE там пишет такое:

PCI device 1002:4345 (ATI Technologies Inc) (3)

Производитель: Linux 2.4.26-std-up-alt6 ehci_hcd
Серийный номер: 00:13.2

Класс              9      (Хаб)
Подкласс       0      (Unused)

Так и должно быть ?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-19 13:56           ` odergimiy
@ 2006-07-20  4:43             ` Хихин Руслан
  2006-07-20 14:45               ` odergimiy
  0 siblings, 1 reply; 10+ messages in thread
From: Хихин Руслан @ 2006-07-20  4:43 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 430 bytes --]

Здравствуйте odergimiy
  В сообщении от 19 июля 2006 17:56 odergimiy написал(a):

 > Прописал, но всеравно неработает.
 >
 > :(
 >
 > В чем может быть еще загвоздка ?

А опишите подробней КАК не работает ?

-- 
  А ещё говорят так  (fortune):
 
Поздно, сегодня все равно будет новая версия.
		-- ldv in sisyphus@
________________________________________________________________________
С уважением Хихин Руслан (hihin@rambler.ru)

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [Comm] Поднять USB
  2006-07-20  4:43             ` Хихин Руслан
@ 2006-07-20 14:45               ` odergimiy
  0 siblings, 0 replies; 10+ messages in thread
From: odergimiy @ 2006-07-20 14:45 UTC (permalink / raw)
  To: hihin, ALT Linux Community

Хихин Руслан пишет:

>Здравствуйте odergimiy
>  В сообщении от 19 июля 2006 17:56 odergimiy написал(a):
>
> > Прописал, но всеравно неработает.
> >
> > :(
> >
> > В чем может быть еще загвоздка ?
>
>А опишите подробней КАК не работает ?
>
>  
>
Ну например втыкаю флешку - монтирую не монтируется, модуль usb-storage 
загружен.
Есть принтер USB кудзу его раньше определял сейчас неопределяется.
РАньше если у меня была запушена VMWARE , втыкаю любое USB  устройство, 
она сразу в виртуальной машине определялось.

Может заквоздка в этом:
0:13.0 USB Controller: ATI Technologies Inc: Unknown device 4347 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4348 (rev 01)
00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4345 (rev 01)


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2006-07-20 14:45 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-07-18 15:07 [Comm] Поднять USB odergimiy
2006-07-18 17:42 ` quakeR
2006-07-18 18:05   ` odergimiy
2006-07-18 18:49     ` Хихин Руслан
2006-07-18 20:09       ` odergimiy
2006-07-18 22:43         ` Хихин Руслан
2006-07-19 13:56           ` odergimiy
2006-07-20  4:43             ` Хихин Руслан
2006-07-20 14:45               ` odergimiy
2006-07-19 15:58           ` odergimiy

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git