* [Comm] Tekram IrMate 410W & kernel 2.4.26
@ 2005-08-10 21:33 Yuri N. Glibovetz
2005-08-10 21:51 ` [Comm] " Yuri N. Glibovetz
0 siblings, 1 reply; 2+ messages in thread
From: Yuri N. Glibovetz @ 2005-08-10 21:33 UTC (permalink / raw)
To: community
Здравствуйте!
Кто-нибудь настраивал Tekram IrMate 410W в Alt Linux 2.4 на ядре 2.4.26?
Скачал http://wetlogic.net/stewart/stir4200/stir4200.tgz, скомпилировал,
забросил в
/lib/modules/2.4.26-std-up-alt12/kernel/drivers/net/irda/stir2400.o
В /etc/sysconfig/irda прописал:
IRDA=yes
DEVICE=irda0
DISCOVERY=yes
В /etc/modules.conf добавил:
options stir4200 rx_sensitivity=3 tx_power=2
# chkconfig --list|grep irda
irda 0:off 1:off 2:on 3:on 4:on 5:on 6:off
При загрузке системы не стартует irattach. Но если после загрузки сделать
# service irda restart
то всё нормально работает. Что я пропустил? Где смотреть?
--
Чудес не бывает - бывают только глюки...
Linux Registered User #387540
http://counter.li.org/cgi-bin/runscript/display-person.cgi?user=387540
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Comm] Re: Tekram IrMate 410W & kernel 2.4.26
2005-08-10 21:33 [Comm] Tekram IrMate 410W & kernel 2.4.26 Yuri N. Glibovetz
@ 2005-08-10 21:51 ` Yuri N. Glibovetz
0 siblings, 0 replies; 2+ messages in thread
From: Yuri N. Glibovetz @ 2005-08-10 21:51 UTC (permalink / raw)
To: community
В догонку:
> /lib/modules/2.4.26-std-up-alt12/kernel/drivers/net/irda/stir2400.o
читать /lib/modules/2.4.26-std-up-alt12/kernel/drivers/net/irda/stir4200.o
--
Чудес не бывает - бывают только глюки...
Linux Registered User #387540
http://counter.li.org/cgi-bin/runscript/display-person.cgi?user=387540
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-08-10 21:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-08-10 21:33 [Comm] Tekram IrMate 410W & kernel 2.4.26 Yuri N. Glibovetz
2005-08-10 21:51 ` [Comm] " Yuri N. Glibovetz
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git