ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] tv tuner Pinnacle PCTV Pro(+FM)
@ 2003-05-18 12:10 Ткаченко Максим
  2003-05-18 17:53 ` Valery V. Inozemtsev
  0 siblings, 1 reply; 2+ messages in thread
From: Ткаченко Максим @ 2003-05-18 12:10 UTC (permalink / raw)
  To: community

Здравствуйте, никак не получается настроить..
загружаю modprobe bttv radio=1 card=52
ничем не ловитятся каналы....
жалко так
АЛМ2.2 стандартный 2.4.20
логи:
May 18 19:06:09 localhost kernel: Linux video capture interface: v1.00
May 18 19:06:09 localhost kernel: i2c-core.o: i2c core module version 2.7.0 
(20021208)
May 18 19:06:09 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module 
version 2.7.0 (20021208)
May 18 19:06:09 localhost kernel: bttv: driver version 0.7.96 loaded
May 18 19:06:09 localhost kernel: bttv: using 4 buffers with 2080k (8320k 
total) for capture
May 18 19:06:09 localhost kernel: bttv: Host bridge is VIA Technologies, Inc. 
VT8377 [KT400 AGP] Host Bridge
May 18 19:06:09 localhost kernel: bttv: Bt8xx card found (0).
May 18 19:06:09 localhost kernel: PCI: Found IRQ 10 for device 00:0c.0
May 18 19:06:09 localhost kernel: PCI: Sharing IRQ 10 with 00:0c.1
May 18 19:06:09 localhost kernel: PCI: Sharing IRQ 10 with 00:10.2
May 18 19:06:09 localhost kernel: PCI: Sharing IRQ 10 with 00:11.5
May 18 19:06:09 localhost kernel: bttv0: Bt878 (rev 17) at 00:0c.0, irq: 10, 
latency: 32, mmio: 0xea000000
May 18 19:06:09 localhost kernel: bttv0: detected: Pinnacle PCTV [card=39], 
PCI subsystem ID is 11bd:0012
May 18 19:06:09 localhost kernel: bttv0: using: BT878(Pinnacle PCTV Studio Pr) 
[card=52,insmod option]
May 18 19:06:09 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... 
found
May 18 19:06:09 localhost kernel: bttv0: miro: id=30 tuner=4 radio=matchbox 
stereo=yes
May 18 19:06:09 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... 
found
May 18 19:06:09 localhost kernel: msp34xx: init: chip=MSP3410G-B11, has NICAM 
support
May 18 19:06:09 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... 
not found
May 18 19:06:09 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... 
not found
May 18 19:06:10 localhost kernel: tvaudio: TV audio decoder + audio/video mux 
driver
May 18 19:06:10 localhost kernel: tvaudio: known chips: 
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 
(PV951)
May 18 19:06:10 localhost kernel: bttv0: registered device video0
May 18 19:06:10 localhost kernel: bttv0: registered device vbi0
May 18 19:06:10 localhost kernel: bttv0: registered device radio0

-- 
С уважением,   maxman@yourline.ru



^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Comm] tv tuner Pinnacle PCTV Pro(+FM)
  2003-05-18 12:10 [Comm] tv tuner Pinnacle PCTV Pro(+FM) Ткаченко Максим
@ 2003-05-18 17:53 ` Valery V. Inozemtsev
  0 siblings, 0 replies; 2+ messages in thread
From: Valery V. Inozemtsev @ 2003-05-18 17:53 UTC (permalink / raw)
  To: community

Ткаченко Максим пишет:

>Здравствуйте, никак не получается настроить..
>загружаю modprobe bttv radio=1 card=52
>ничем не ловитятся каналы....
>жалко так
>
>May 18 19:06:09 localhost kernel: bttv0: detected: Pinnacle PCTV [card=39], 
>PCI subsystem ID is 11bd:0012
>  
>
Автоматом определяется card=39

>May 18 19:06:09 localhost kernel: bttv0: using: BT878(Pinnacle PCTV Studio Pr) 
>[card=52,insmod option]
>
>  
>
Накой фиг ты ее 52 делаешь?

modules.conf

alias char-major-81 bttv
alias char-major-81-0 bttv
alias char-major-81-64 bttv

если хочешь явно указать карту то
options bttv card=39 radio=1




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-05-18 17:53 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-05-18 12:10 [Comm] tv tuner Pinnacle PCTV Pro(+FM) Ткаченко Максим
2003-05-18 17:53 ` Valery V. Inozemtsev

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git