[Comm] Заблудился в трёх соснах (mustek 1200 ub & branch41)

[Comm] Заблудился в трёх соснах (mustek 1200 ub & branch41)

[Алексей Шенцев]

Всем привет!
Вот такое дело:
[root@oasu3 /]# uname -r
2.6.24-wks-smp-alt1
[root@oasu3 ~]# cat /etc/sane.d/dll.conf
# enable the next line if you want to allow access through the network:
#epkowa
snapscan
mustek_usb.conf
gt68xx.conf
[root@oasu3 ~]# cat /etc/sane.d/mustek_usb.conf | grep "1200 UB"
# Autodetect 1200 UB and Trust Compact Scan USB 19200
usb 0x055f 0x0006       # Mustek 1200 UB:
[root@oasu3 ~]# cat /etc/sane.d/snapscan.conf | grep "1200 UB"
# Mustek 1200 UB
firmware /usr/share/sane/gt68xx/sbfw.usb        # Mustek 1200 UB:
# Mustek 1200 UB
usb                                             # Mustek 1200 UB:
usb 0x055f 0x0006                               # Mustek 1200 UB:
[root@oasu3 ~]# cat /etc/sane.d/gt68xx.conf | grep "1200 UB"
# Autodetect Mustek BearPaw 1200 CU, 2400 CU, Mustek ScanExpress 1200 UB Plus,
# Mustek ScanExpress 1200 UB Plus:
# Mustek 1200 UB:
usb 0x055f 0x0006                       # Mustek 1200 UB:
override "mustek-scanexpress-1200-ub"   # Mustek 1200 UB:
firmware "sbfw.usb"                     # Mustek 1200 UB:
[root@oasu3 /]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 055f:0006 Mustek Systems, Inc. ScanExpress 1200 UB
Bus 002 Device 004: ID 03f0:0317 Hewlett-Packard LaserJet 1200
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[root@oasu3 /]# sane-find-scanner | grep found
  # No SCSI scanners found. If you expected something different, make sure 
that
found USB scanner (vendor=0x055f, product=0x0006, chip=MA-1017) at 
libusb:002:005
[root@oasu3 /]# ls -ld /dev/*scanner*
lrwxrwxrwx 1 root root 15 Июн 27  2008 /dev/scanner-2-2 -> bus/usb/002/005
lrwxrwxrwx 1 root root 15 Июн 27  2008 /dev/scanner-usbdev2.5 -> 
bus/usb/002/005
[root@oasu3 /]# scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[root@oasu3 /]#

Что я делаю не так?
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845

Re: [Comm] Заблудился в трёх соснах (mustek 1200 ub & branch41)

[Алексей Шенцев]

Тема закрыта. Снёс весь sane, поставил заного, перегрузился на всякий случай, 
всё заработало "из коробки".
-- 
С уважением Шенцев Алексей Владимирович.
E-mail: ashen@nsrz.ru
XMPP: ashen@altlinux.org, AlexShen@jabber.ru
ICQ: 271053845