* [Comm] zip drive
@ 2006-08-08 6:42 Igo
2006-08-08 14:07 ` Igo
0 siblings, 1 reply; 3+ messages in thread
From: Igo @ 2006-08-08 6:42 UTC (permalink / raw)
To: ALT Linux Community
Есть FUJITSU MCF3064AP, ATAPI OPTICAL drive но немогу застаить работать
Что можно сделать?
[root@cerber etc]# mount /dev/hdd /mnt/disk/
mount: /dev/hdd is not a valid block device
[root@cerber etc]# fdisk -l /dev/hdd
[root@cerber etc]#
[root@cerber etc]# fdisk /dev/hdd
Unable to open /dev/hdd
[root@cerber etc]# dmesg | grep hdd
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hdd: FUJITSU MCF3064AP, ATAPI OPTICAL drive
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] zip drive
2006-08-08 6:42 [Comm] zip drive Igo
@ 2006-08-08 14:07 ` Igo
2006-08-08 19:48 ` Michael Shigorin
0 siblings, 1 reply; 3+ messages in thread
From: Igo @ 2006-08-08 14:07 UTC (permalink / raw)
To: altlinux, ALT Linux Community
отвечу сам может кому пригодиться
нужно подгрузить модуль ide-scsi и потом mount /dev/sda /mnt/disk
> Есть FUJITSU MCF3064AP, ATAPI OPTICAL drive но немогу застаить работать
> Что можно сделать?
>
> [root@cerber etc]# mount /dev/hdd /mnt/disk/
> mount: /dev/hdd is not a valid block device
>
> [root@cerber etc]# fdisk -l /dev/hdd
> [root@cerber etc]#
>
> [root@cerber etc]# fdisk /dev/hdd
> Unable to open /dev/hdd
>
>
> [root@cerber etc]# dmesg | grep hdd
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
> hdd: FUJITSU MCF3064AP, ATAPI OPTICAL drive
>
>
>
> _______________________________________________
> Community mailing list
> Community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] zip drive
2006-08-08 14:07 ` Igo
@ 2006-08-08 19:48 ` Michael Shigorin
0 siblings, 0 replies; 3+ messages in thread
From: Michael Shigorin @ 2006-08-08 19:48 UTC (permalink / raw)
To: ALT Linux Community
On Tue, Aug 08, 2006 at 06:07:46PM +0400, Igo wrote:
> отвечу сам может кому пригодиться
> нужно подгрузить модуль ide-scsi и потом mount /dev/sda /mnt/disk
Да, так и работало. Если будете форматировать, то там ещё размер
блока нестандартный был -- 2048 байт, что ли.
> > Есть FUJITSU MCF3064AP, ATAPI OPTICAL drive но немогу
> > застаить работать Что можно сделать?
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-08-08 19:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-08 6:42 [Comm] zip drive Igo
2006-08-08 14:07 ` Igo
2006-08-08 19:48 ` Michael Shigorin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git