* [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
@ 2006-08-04 18:39 Dmitriy
2006-08-07 8:34 ` Sergey Vlasov
2006-08-08 12:54 ` dmitriy
0 siblings, 2 replies; 6+ messages in thread
From: Dmitriy @ 2006-08-04 18:39 UTC (permalink / raw)
To: ALT Linux Community
Приветствую сообщество !
Есть ноутбук ASUS A6R + установлен ALC 3.0 DVD9 edition , на борту имеем :
---------------------------------------------------------------------------------------------------------------------
]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Celeron(R) M processor 1.60GHz
stepping : 8
cpu MHz : 200.011
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx
bogomips : 3153.92
---------------------------------------------------------------------------------------------------------------------
]# lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
Controller
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97
Audio Controller (rev 02)
0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller
(rev 02)
0000:01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
Xpress 200M]
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
(rev 17)
0000:02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 08)
0000:02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
-------------------------------------------------------------------------------------------------------------------------------------------------
Из этого не работает:
1. POWERSAVED = cooler постоянно крутит при любой схеме управления питанием
->log->
]# powersave -F
Fan no 0: off
]# powersave -T
Thermal Device no. 0:
Temperature: 52
Critical: 105
Passive: 100
Active 0: 60
А также не подерживался SPEEDSTEPING пока я незагрузил модуль P4-CLOCKMOD ,
хотя на сколько это правельно незнаю ?
2. WI-FI = 0000:02:03.0 Network controller: Broadcom Corporation BCM4318
[AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
в дистре драйверов нет, но есть платные на LINUXANT и это проблема ! через
NDISWRAPPER непробывал и ещё незнаю как .
3. MODEM = 0000:00:14.6 ATI Technologies Inc ATI SB400 - AC'97 Modem
Controller (rev 02)
тоже самое есть на LINUXANT, но есть модуль SND_ATIIXP_MODEM который загружен
по дефаулту.
4. SOUND = 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP
SB400 AC'97 Audio Controller (rev 02)
вот здесь все логи:
]# /sbin/lsmod
Module Size Used by
cpufreq_powersave 1920 0
cpufreq_conservative 7076 0
cpufreq_ondemand 6172 1
cpufreq_userspace 4572 0
lp 12616 0
fglrx 256160 7
ac 4996 0
thermal 13192 0
processor 22324 1 thermal
fan 4740 0
button 6800 0
battery 9604 0
ide_cd 39684 0
cdrom 37536 1 ide_cd
af_packet 21640 2
yenta_socket 22152 0
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 48260 2 yenta_socket,rsrc_nonstatic
8139too 25088 0
mii 5760 1 8139too
snd_atiixp_modem 15752 1
evdev 9344 1
ati_agp 8716 0
agpgart 34248 2 fglrx,ati_agp
psmouse 35844 0
parport_pc 38468 1
parport 33864 2 lp,parport_pc
irtty_sir 6656 0
sir_dev 16684 1 irtty_sir
irda 118712 1 sir_dev
crc_ccitt 2176 1 irda
pcspkr 3652 0
ohci_hcd 20484 0
ehci_hcd 32904 0
usbcore 114012 3 ohci_hcd,ehci_hcd
snd_atiixp 19084 1
snd_ac97_codec 88352 2 snd_atiixp_modem,snd_atiixp
snd_pcm_oss 51872 0
snd_seq_dummy 3972 0
snd_seq_oss 33024 0
snd_seq_midi_event 7040 1 snd_seq_oss
snd_seq 49296 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8716 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss 18176 1 snd_pcm_oss
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm 85128 4
snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer 23684 2 snd_seq,snd_pcm
snd 54628 16
snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10632 3 snd_atiixp_modem,snd_atiixp,snd_pcm
subfs 7680 1
dm_mod 55868 0
p4_clockmod 5000 0
speedstep_lib 4484 1 p4_clockmod
freq_table 4612 1 p4_clockmod
rtc 12344 0
reiserfs 248176 1
ide_disk 17024 3
ide_generic 1408 0 [permanent]
atiixp 5904 0 [permanent]
ide_core 120856 4 ide_cd,ide_disk,ide_generic,atiixp
]# lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
Controller
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97
Audio Controller (rev 02)
0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller
(rev 02)
0000:01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
Xpress 200M]
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
(rev 17)
0000:02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 08)
0000:02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1002:5a31 (ATI Technologies Inc) (rev 1).
Master Capable. Latency=64.
Non-prefetchable 64 bit memory at 0x0 [0x1fffffff].
Bus 0, device 1, function 0:
PCI bridge: PCI device 1002:5a3f (ATI Technologies Inc) (rev 0).
Master Capable. Latency=64. Min Gnt=10.
Bus 0, device 19, function 0:
USB Controller: PCI device 1002:4374 (ATI Technologies Inc) (rev 0).
IRQ 19.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebff000 [0xfebfffff].
Bus 0, device 19, function 1:
USB Controller: PCI device 1002:4375 (ATI Technologies Inc) (rev 0).
IRQ 19.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfefff].
Bus 0, device 19, function 2:
USB Controller: PCI device 1002:4373 (ATI Technologies Inc) (rev 0).
IRQ 19.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfebfd000 [0xfebfdfff].
Bus 0, device 20, function 0:
SMBus: ATI Technologies Inc ATI SMBus (rev 17).
I/O at 0xb00 [0xb0f].
Non-prefetchable 32 bit memory at 0x18000000 [0x180003ff].
Bus 0, device 20, function 1:
IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI (rev 0).
IRQ 16.
I/O at 0xff00 [0xff0f].
Bus 0, device 20, function 3:
ISA bridge: PCI device 1002:4377 (ATI Technologies Inc) (rev 0).
Bus 0, device 20, function 4:
PCI bridge: PCI device 1002:4371 (ATI Technologies Inc) (rev 0).
Master Capable. Latency=64. Min Gnt=3.
Bus 0, device 20, function 5:
Multimedia audio controller: PCI device 1002:4370 (ATI Technologies Inc)
(rev 2).
IRQ 17.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfcc00 [0xfebfccff].
Bus 0, device 20, function 6:
Modem: PCI device 1002:4378 (ATI Technologies Inc) (rev 2).
IRQ 17.
Master Capable. Latency=64. Min Gnt=2.
Non-prefetchable 32 bit memory at 0xfebfc800 [0xfebfc8ff].
Bus 1, device 5, function 0:
VGA compatible controller: PCI device 1002:5a62 (ATI Technologies Inc)
(rev 0).
IRQ 17.
Master Capable. Latency=255. Min Gnt=8.
Prefetchable 32 bit memory at 0xc0000000 [0xcfffffff].
I/O at 0x9800 [0x98ff].
Non-prefetchable 32 bit memory at 0xfe1f0000 [0xfe1fffff].
Bus 2, device 0, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
(rev 16).
IRQ 20.
Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
I/O at 0xb800 [0xb8ff].
Non-prefetchable 32 bit memory at 0xfeaffc00 [0xfeaffcff].
Bus 2, device 1, function 0:
CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 179).
IRQ 16.
Master Capable. Latency=168. Min Gnt=128.Max Lat=5.
Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
Bus 2, device 1, function 1:
Class 0805: PCI device 1180:0822 (Ricoh Co Ltd) (rev 23).
IRQ 5.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfeaff800 [0xfeaff8ff].
Bus 2, device 1, function 2:
System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev
8).
IRQ 5.
Non-prefetchable 32 bit memory at 0xfeaff400 [0xfeaff4ff].
Bus 2, device 3, function 0:
Network controller: PCI device 14e4:4318 (Broadcom Corporation) (rev 2).
IRQ 5.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafdfff].
]# dmesg
Linux version 2.6.12-std26-up-alt10 (builder@salto.malta.altlinux.ru) (gcc
version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Feb 28 17:29:17
MSK 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)
BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data)
BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
On node 0 totalpages: 98256
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94160 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f85d0
ACPI: RSDT (v001 A M I OEMRSDT 0x10000519 MSFT 0x00000097) @ 0x17fd0000
ACPI: FADT (v002 A M I OEMFACP 0x10000519 MSFT 0x00000097) @ 0x17fd0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000519 MSFT 0x00000097) @ 0x17fd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x10000519 MSFT 0x00000097) @ 0x17fd03f0
ACPI: BOOT (v001 A M I OEMBOOT 0x10000519 MSFT 0x00000097) @ 0x17fd0430
ACPI: OEMB (v001 A M I AMI_OEM 0x10000519 MSFT 0x00000097) @ 0x17fde040
ACPI: SSDT (v001 AMI CPU_CST 0x00000001 INTL 0x02002026) @ 0x17fd6d20
ACPI: DSDT (v001 AMJG_ AMJG_B32 0x00000b32 INTL 0x02002026) @ 0x00000000
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 18000000 (gap: 18000000:e6e00000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-up ro root=301
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1600.095 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 385928k/393024k available (1497k kernel code, 6536k reserved, 741k
data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 358k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 24)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
Simple Boot Flag at 0xff set to 0x1
audit: initializing netlink socket (disabled)
audit(1154701249.092:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 6144k, total
131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:5214
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737
bytes,<6>...found (1024x768, 15803 bytes, v3).
Console: switching to colour frame buffer device 128x45
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
ACPI wakeup devices:
PCE2 PS2K P0P9 LAN0 CBS0 CRD0 CRD1 AC97 MC97 USB1 USB2 EUSB SLPB
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: HTS541080G9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 184k freed
Executing init=/sbin/init
Real Time Clock Driver v1.12
Adding 329324k swap on /dev/hda2. Priority:-1 extents:1
p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers
voltage scaling in addition of frequency scaling. You should use that instead
of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
subfs 0.9
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfd000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfebff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
input.c: calling hotplug without a hotplug agent defined
input: PC Speaker
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Linux agpgart interface v0.101 (c) Dave Jones
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input.c: calling hotplug without a hotplug agent defined
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.10/pci/ac97/ac97_codec.c:2033:
MC'97 1 converters and GPIO not ready (0xff00)
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xd913ec00, 00:15:f2:b5:c3:e1, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:02:01.0 [1043:1187]
Yenta: ISA IRQ mask 0x0638, PCI irq 16
Socket status: 30000006
NET: Registered protocol family 17
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FN00] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (56 C)
ACPI: AC Adapter [AC0] (on-line)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg,
GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 315 MBytes.
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 119828480
[fglrx] max LFB = 119828480
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
lp0: using parport0 (interrupt-driven).
lp0: console ready
kernel: Linux version 2.6.12-std26-up-alt10 (builder@salto.malta.altlinux.ru)
(gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Feb 28
17:29:17 MSK 2006
Aug 4 14:47:19 machine1600 kernel: BIOS-provided physical RAM map:
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000000100000 -
0000000017fd0000 (usable)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000017fd0000 -
0000000017fde000 (ACPI data)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000017fde000 -
0000000018000000 (ACPI NVS)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000ffb80000 -
0000000100000000 (reserved)
Aug 4 14:47:19 machine1600 kernel: 0MB HIGHMEM available.
Aug 4 14:47:19 machine1600 kernel: 383MB LOWMEM available.
Aug 4 14:47:19 machine1600 kernel: DMI 2.3 present.
Aug 4 14:47:19 machine1600 kernel: ATI board detected. Disabling timer
routing over 8254.
Aug 4 14:47:19 machine1600 kernel: ACPI: PM-Timer IO Port: 0x808
Aug 4 14:47:19 machine1600 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
Aug 4 14:47:19 machine1600 kernel: Processor #0 6:13 APIC version 20
Aug 4 14:47:19 machine1600 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000]
gsi_base[0])
Aug 4 14:47:19 machine1600 kernel: IOAPIC[0]: apic_id 1, version 33, address
0xfec00000, GSI 0-23
Aug 4 14:47:19 machine1600 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Aug 4 14:47:19 machine1600 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 21 low level)
Aug 4 14:47:19 machine1600 kernel: Enabling APIC mode: Flat. Using 1 I/O
APICs
Aug 4 14:47:19 machine1600 kernel: Using ACPI (MADT) for SMP configuration
information
Aug 4 14:47:19 machine1600 kernel: Allocating PCI resources starting at
18000000 (gap: 18000000:e6e00000)
Aug 4 14:47:19 machine1600 kernel: Built 1 zonelists
Aug 4 14:47:19 machine1600 kernel: Kernel command line: auto
BOOT_IMAGE=linux-up ro root=301
Aug 4 14:47:19 machine1600 kernel: Initializing CPU#0
Aug 4 14:47:19 machine1600 kernel: PID hash table entries: 2048 (order: 11,
32768 bytes)
Aug 4 14:47:19 machine1600 kernel: Detected 1601.292 MHz processor.
Aug 4 14:47:19 machine1600 kernel: Using pmtmr for high-res timesource
Aug 4 14:47:19 machine1600 kernel: Console: colour dummy device 80x25
Aug 4 14:47:19 machine1600 kernel: Dentry cache hash table entries: 65536
(order: 6, 262144 bytes)
Aug 4 14:47:19 machine1600 kernel: Inode-cache hash table entries: 32768
(order: 5, 131072 bytes)
Aug 4 14:47:19 machine1600 kernel: Memory: 385928k/393024k available (1497k
kernel code, 6536k reserved, 741k data, 184k init, 0k highmem)
Aug 4 14:47:19 machine1600 kernel: Checking if this processor honours the WP
bit even in supervisor mode... Ok.
Aug 4 14:47:19 machine1600 kernel: Security Framework v1.0.0 initialized
Aug 4 14:47:19 machine1600 kernel: Capability LSM initialized
Aug 4 14:47:19 machine1600 kernel: Mount-cache hash table entries: 512
Aug 4 14:47:19 machine1600 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 4 14:47:19 machine1600 kernel: CPU: L2 cache: 1024K
Aug 4 14:47:19 machine1600 kernel: Intel machine check architecture
supported.
Aug 4 14:47:19 machine1600 kernel: Intel machine check reporting enabled on
CPU#0.
Aug 4 14:47:19 machine1600 kernel: CPU: Intel(R) Celeron(R) M processor
1.60GHz stepping 08
Aug 4 14:47:19 machine1600 kernel: Enabling fast FPU save and restore...
done.
Aug 4 14:47:19 machine1600 kernel: Enabling unmasked SIMD FPU exception
support... done.
Aug 4 14:47:19 machine1600 kernel: Checking 'hlt' instruction... OK.
Aug 4 14:47:19 machine1600 kernel: ACPI: Looking for DSDT in initrd... not
found!
Aug 4 14:47:19 machine1600 kernel: ENABLING IO-APIC IRQs
Aug 4 14:47:19 machine1600 kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Aug 4 14:47:19 machine1600 kernel: ..MP-BIOS bug: 8254 timer not connected to
IO-APIC
Aug 4 14:47:19 machine1600 kernel: ...trying to set up timer (IRQ0) through
the 8259A ... failed.
Aug 4 14:47:19 machine1600 kernel: ...trying to set up timer as Virtual Wire
IRQ... works.
Aug 4 14:47:19 machine1600 kernel: checking if image is initramfs...it isn't
(no cpio magic); looks like an initrd
Aug 4 14:47:19 machine1600 kernel: Freeing initrd memory: 358k freed
Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 16
Aug 4 14:47:19 machine1600 kernel: PCI: PCI BIOS revision 3.00 entry at
0xf0031, last bus=3
Aug 4 14:47:19 machine1600 kernel: PCI: Using MMCONFIG
Aug 4 14:47:19 machine1600 kernel: mtrr: v2.0 (20020519)
Aug 4 14:47:19 machine1600 kernel: ACPI: Subsystem revision 20050309
Aug 4 14:47:19 machine1600 kernel: ACPI: Interpreter enabled
Aug 4 14:47:19 machine1600 kernel: ACPI: Using IOAPIC for interrupt routing
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 4 14:47:19 machine1600 kernel: PCI: Probing PCI hardware (bus 00)
Aug 4 14:47:19 machine1600 kernel: PCI: Ignoring BAR0-3 of IDE controller
0000:00:14.1
Aug 4 14:47:19 machine1600 kernel: PCI: Transparent bridge - 0000:00:14.4
Aug 4 14:47:19 machine1600 kernel: ACPI: Embedded Controller [EC0] (gpe 24)
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 9)
*0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4
5 7 10 11 12 14 15) *0, disabled.
Aug 4 14:47:19 machine1600 kernel: ACPI: Power Resource [GFAN] (off)
Aug 4 14:47:19 machine1600 kernel: Linux Plug and Play Support v0.97 (c) Adam
Belay
Aug 4 14:47:19 machine1600 kernel: pnp: PnP ACPI init
Aug 4 14:47:19 machine1600 kernel: pnp: PnP ACPI: found 14 devices
Aug 4 14:47:19 machine1600 kernel: PnPBIOS: Disabled by ACPI PNP
Aug 4 14:47:19 machine1600 kernel: PCI: Using ACPI for IRQ routing
Aug 4 14:47:19 machine1600 kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Aug 4 14:47:19 machine1600 kernel: PCI: Cannot allocate resource region 3 of
device 0000:00:00.0
Aug 4 14:47:19 machine1600 kernel: pnp: 00:07: ioport range 0xa00-0xa0f has
been reserved
Aug 4 14:47:19 machine1600 kernel: Simple Boot Flag at 0xff set to 0x1
Aug 4 14:47:19 machine1600 kernel: audit: initializing netlink socket
(disabled)
Aug 4 14:47:19 machine1600 kernel: audit(1154688418.983:0): initialized
Aug 4 14:47:19 machine1600 kernel: Total HugeTLB memory allocated, 0
Aug 4 14:47:19 machine1600 kernel: VFS: Disk quotas dquot_6.5.1
Aug 4 14:47:19 machine1600 kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Aug 4 14:47:19 machine1600 kernel: Initializing Cryptographic API
Aug 4 14:47:19 machine1600 kernel: vesafb: framebuffer at 0xc0000000, mapped
to 0xd8880000, using 6144k, total 131072k
Aug 4 14:47:19 machine1600 kernel: vesafb: mode is 1024x768x16,
linelength=2048, pages=84
Aug 4 14:47:19 machine1600 kernel: vesafb: protected mode interface info at
c000:5214
Aug 4 14:47:19 machine1600 kernel: vesafb: scrolling: redraw
Aug 4 14:47:19 machine1600 kernel: vesafb: Truecolor: size=0:5:6:5,
shift=0:11:5:0
Aug 4 14:47:19 machine1600 kernel: bootsplash 3.1.6-2004/03/31: looking for
picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803
bytes, v3).
Aug 4 14:47:19 machine1600 kernel: Console: switching to colour frame buffer
device 128x45
Aug 4 14:47:19 machine1600 kernel: fb0: VESA VGA frame buffer device
Aug 4 14:47:19 machine1600 kernel: isapnp: Scanning for PnP cards...
Aug 4 14:47:19 machine1600 kernel: isapnp: No Plug & Play device found
Aug 4 14:47:19 machine1600 kernel: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Aug 4 14:47:19 machine1600 kernel: i8042.c: Detected active multiplexing
controller, rev 1.1.
Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 4 14:47:19 machine1600 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 4 14:47:19 machine1600 kernel: io scheduler noop registered
Aug 4 14:47:19 machine1600 kernel: io scheduler anticipatory registered
Aug 4 14:47:19 machine1600 kernel: io scheduler deadline registered
Aug 4 14:47:19 machine1600 kernel: io scheduler cfq registered
Aug 4 14:47:19 machine1600 kernel: RAMDISK driver initialized: 16 RAM disks
of 12288K size 1024 blocksize
Aug 4 14:47:19 machine1600 kernel: mice: PS/2 mouse device common for all
mice
Aug 4 14:47:19 machine1600 kernel: md: md driver 0.90.1 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 2
Aug 4 14:47:19 machine1600 kernel: IP: routing cache hash table of 4096
buckets, 32Kbytes
Aug 4 14:47:19 machine1600 kernel: TCP established hash table entries: 16384
(order: 5, 131072 bytes)
Aug 4 14:47:19 machine1600 kernel: TCP bind hash table entries: 16384 (order:
4, 65536 bytes)
Aug 4 14:47:19 machine1600 kernel: TCP: Hash tables configured (established
16384 bind 16384)
Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 1
Aug 4 14:47:19 machine1600 kernel: ACPI wakeup devices:
Aug 4 14:47:19 machine1600 kernel: PCE2 PS2K P0P9 LAN0 CBS0 CRD0 CRD1 AC97
MC97 USB1 USB2 EUSB SLPB
Aug 4 14:47:19 machine1600 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Aug 4 14:47:19 machine1600 kernel: md: Autodetecting RAID arrays.
Aug 4 14:47:19 machine1600 kernel: md: autorun ...
Aug 4 14:47:19 machine1600 kernel: md: ... autorun DONE.
Aug 4 14:47:19 machine1600 kernel: RAMDISK: Compressed image found at block 0
Aug 4 14:47:19 machine1600 kernel: VFS: Mounted root (romfs filesystem)
readonly.
Aug 4 14:47:19 machine1600 kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Aug 4 14:47:19 machine1600 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Aug 4 14:47:19 machine1600 kernel: ATIIXP: IDE controller at PCI slot
0000:00:14.1
Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI
16 (level, low) -> IRQ 16
Aug 4 14:47:19 machine1600 kernel: ATIIXP: chipset revision 0
Aug 4 14:47:19 machine1600 kernel: ATIIXP: not 100%% native mode: will probe
irqs later
Aug 4 14:47:19 machine1600 kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS
settings: hda:DMA, hdb:pio
Aug 4 14:47:19 machine1600 kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS
settings: hdc:DMA, hdd:pio
Aug 4 14:47:19 machine1600 kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Aug 4 14:47:19 machine1600 kernel: hda: HTS541080G9AT00, ATA DISK drive
Aug 4 14:47:19 machine1600 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 4 14:47:19 machine1600 kernel: hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI
CD/DVD-ROM drive
Aug 4 14:47:19 machine1600 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 4 14:47:19 machine1600 kernel: hda: max request size: 1024KiB
Aug 4 14:47:19 machine1600 kernel: hda: 156301488 sectors (80026 MB)
w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
Aug 4 14:47:19 machine1600 kernel: hda: cache flushes supported
Aug 4 14:47:19 machine1600 kernel: hda: hda1 hda2
Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: found reiserfs format
"3.6" with standard journal
Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: using ordered data mode
Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: journal params: device
hda1, size 8192, journal first block 18, max trans len 1024, max batch 900,
max commit age 30, max trans age 30
Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: checking transaction log
(hda1)
Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: Using r5 hash to sort
names
Aug 4 14:47:19 machine1600 kernel: VFS: Mounted root (reiserfs filesystem)
readonly.
Aug 4 14:47:19 machine1600 kernel: Trying to move old root to /initrd ...
failed
Aug 4 14:47:19 machine1600 kernel: Unmounting old root
Aug 4 14:47:19 machine1600 kernel: Trying to free ramdisk memory ... okay
Aug 4 14:47:19 machine1600 kernel: Freeing unused kernel memory: 184k freed
Aug 4 14:47:19 machine1600 kernel: Executing init=/sbin/init
Aug 4 14:47:19 machine1600 kernel: Real Time Clock Driver v1.12
Aug 4 14:47:19 machine1600 kernel: Adding 329324k swap on /dev/hda2.
Priority:-1 extents:1
Aug 4 14:47:19 machine1600 kernel: p4-clockmod: Warning: Pentium M detected.
The speedstep_centrino module offers voltage scaling in addition of frequency
scaling. You should use that instead of p4-clockmod, if possible.
Aug 4 14:47:19 machine1600 kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand
Clock Modulation available
Aug 4 14:47:19 machine1600 kernel: device-mapper: 4.4.0-ioctl (2005-01-12)
initialised: dm-devel@redhat.com
Aug 4 14:47:19 machine1600 kernel: subfs 0.9
Aug 4 14:47:20 machine1600 hotplug: Hotplug (cpu.rc) start: succeeded
Aug 4 14:47:20 machine1600 hal.hotplug[2634]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:18 machine1600 udevd: udevd startup succeeded
Aug 4 14:47:18 machine1600 rc: Starting pcmcia: succeeded
Aug 4 14:47:18 machine1600 network: Computing interface groups:
Aug 4 14:47:18 machine1600 network: .
Aug 4 14:47:18 machine1600 network: .
Aug 4 14:47:18 machine1600 network: 2 interfaces found
Aug 4 14:47:18 machine1600 network: Starting group 0/virtual (1 interfaces)
Aug 4 14:47:18 machine1600 network: ^IStarting lo:
Aug 4 14:47:18 machine1600 network: .
Aug 4 14:47:18 machine1600 last message repeated 3 times
Aug 4 14:47:18 machine1600 network: OK
Aug 4 14:47:18 machine1600 network: Starting group 1/realphys (1 interfaces)
Aug 4 14:47:18 machine1600 network: ^IStarting eth0:
Aug 4 14:47:18 machine1600 network: skipping hotplug iface 'eth0'
Aug 4 14:47:18 machine1600 network: SKIPPED
Aug 4 14:47:18 machine1600 network: Processing /etc/net/vlantab:
Aug 4 14:47:18 machine1600 network: 0 lines processed.
Aug 4 14:47:18 machine1600 rc: Starting network: succeeded
Aug 4 14:47:18 machine1600 portmap: portmap startup succeeded
Aug 4 14:47:18 machine1600 dd: 1+0 records in
Aug 4 14:47:18 machine1600 dd: 1+0 records out
Aug 4 14:47:18 machine1600 dd: 512 bytes (512 B) copied, 0.000399 seconds,
1.3 MB/s
Aug 4 14:47:18 machine1600 random: Initializing random number generator:
succeeded
Aug 4 14:47:21 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI
17 (level, low) -> IRQ 17
Aug 4 14:47:22 machine1600 hotplug: Hotplug (sound.rc) start: succeeded
Aug 4 14:47:22 machine1600 sound.dev[2965]: Restore mixer values
for /class/sound/controlC0 (0)
Aug 4 14:47:22 machine1600 kernel: usbcore: registered new driver usbfs
Aug 4 14:47:22 machine1600 kernel: usbcore: registered new driver hub
Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI
19 (level, low) -> IRQ 19
Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: PCI device
1002:4373 (ATI Technologies Inc)
Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: new USB bus
registered, assigned bus number 1
Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: irq 19, io mem
0xfebfd000
Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: USB 2.0
initialized, EHCI 1.00, driver 10 Dec 2004
Aug 4 14:47:22 machine1600 kernel: hub 1-0:1.0: USB hub found
Aug 4 14:47:22 machine1600 kernel: hub 1-0:1.0: 8 ports detected
Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI
19 (level, low) -> IRQ 19
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: PCI device
1002:4374 (ATI Technologies Inc)
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: new USB bus
registered, assigned bus number 2
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: irq 19, io mem
0xfebff000
Aug 4 14:47:22 machine1600 kernel: hub 2-0:1.0: USB hub found
Aug 4 14:47:22 machine1600 kernel: hub 2-0:1.0: 4 ports detected
Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI
19 (level, low) -> IRQ 19
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: PCI device
1002:4375 (ATI Technologies Inc)
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: new USB bus
registered, assigned bus number 3
Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: irq 19, io mem
0xfebfe000
Aug 4 14:47:22 machine1600 kernel: hub 3-0:1.0: USB hub found
Aug 4 14:47:22 machine1600 kernel: hub 3-0:1.0: 4 ports detected
Aug 4 14:47:22 machine1600 hotplug: Hotplug (usb.rc) start: succeeded
Aug 4 14:47:24 machine1600 kernel: input.c: calling hotplug without a hotplug
agent defined
Aug 4 14:47:24 machine1600 kernel: input: PC Speaker
Aug 4 14:47:25 machine1600 kernel: NET: Registered protocol family 23
Aug 4 14:47:25 machine1600 kernel: parport: PnPBIOS parport detected.
Aug 4 14:47:25 machine1600 kernel: parport0: PC-style at 0x378, irq 7
[PCSPP,EPP]
Aug 4 14:47:25 machine1600 pnp.rc[3155]: missing kernel or user mode driver
atkbd
Aug 4 14:47:25 machine1600 hotplug: Hotplug (pnp.rc) start: succeeded
Aug 4 14:47:26 machine1600 hal.hotplug[3803]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 kernel: Linux agpgart interface v0.101 (c) Dave
Jones
Aug 4 14:47:26 machine1600 hal.hotplug[3852]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 hal.hotplug[3901]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 hal.hotplug[3933]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 kernel: Synaptics Touchpad, model: 1, fw: 6.1, id:
0xa3a0b3, caps: 0xa04713/0x10008
Aug 4 14:47:26 machine1600 kernel: input.c: calling hotplug without a hotplug
agent defined
Aug 4 14:47:26 machine1600 kernel: input: SynPS/2 Synaptics TouchPad on
isa0060/serio4
Aug 4 14:47:26 machine1600 hal.hotplug[3972]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 hal.hotplug[4014]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 hal.hotplug[4079]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:26 machine1600 hal.hotplug[4166]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 hal.hotplug[4193]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 hal.hotplug[4220]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 hal.hotplug[4252]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI
17 (level, low) -> IRQ 17
Aug 4 14:47:27 machine1600 kernel:
ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.10/pci/ac97/ac97_codec.c:2033:
MC'97 1 converters and GPIO not ready (0xff00)
Aug 4 14:47:27 machine1600 hal.hotplug[4312]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 sound.dev[4378]: Restore mixer values
for /class/sound/controlC1 (1)
Aug 4 14:47:27 machine1600 hal.hotplug[4411]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:27 machine1600 kernel: 8139too Fast Ethernet driver 0.9.27
Aug 4 14:47:27 machine1600 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI
20 (level, low) -> IRQ 20
Aug 4 14:47:27 machine1600 kernel: eth0: RealTek RTL8139 at 0xd913ec00,
00:15:f2:b5:c3:e1, IRQ 20
Aug 4 14:47:27 machine1600 hal.hotplug[4475]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: ifplugd 0.28 initializing.
Aug 4 14:47:28 machine1600 kernel: eth0: link down
Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Using interface
eth0/00:15:F2:B5:C3:E1 with driver <8139too> (version: 0.9.27)
Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Using detection mode:
SIOCETHTOOL
Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Initialization complete, link
beat not detected.
Aug 4 14:47:28 machine1600 kernel: Linux Kernel Card Services
Aug 4 14:47:28 machine1600 kernel: options: [pci] [cardbus] [pm]
Aug 4 14:47:28 machine1600 kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI
16 (level, low) -> IRQ 16
Aug 4 14:47:28 machine1600 kernel: Yenta: CardBus bridge found at
0000:02:01.0 [1043:1187]
Aug 4 14:47:28 machine1600 kernel: Yenta: ISA IRQ mask 0x0638, PCI irq 16
Aug 4 14:47:28 machine1600 kernel: Socket status: 30000006
Aug 4 14:47:28 machine1600 hal.hotplug[4585]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:28 machine1600 hal.hotplug[4620]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:28 machine1600 hal.hotplug[4647]: DEVPATH is not set (subsystem
pci)
Aug 4 14:47:28 machine1600 hotplug: Hotplug (pci.rc) start: succeeded
Aug 4 14:47:28 machine1600 hotplug: Hotplug (misc.rc) start: succeeded
Aug 4 14:47:28 machine1600 kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW
drive, 2048kB Cache, UDMA(33)
Aug 4 14:47:28 machine1600 kernel: Uniform CD-ROM driver Revision: 3.20
Aug 4 14:47:28 machine1600 hotplug: Hotplug (block.rc) start: succeeded
Aug 4 14:47:29 machine1600 kernel: ACPI: Battery Slot [BAT0] (battery
present)
Aug 4 14:47:29 machine1600 kernel: ACPI: Power Button (FF) [PWRF]
Aug 4 14:47:29 machine1600 kernel: ACPI: Lid Switch [LID]
Aug 4 14:47:29 machine1600 kernel: ACPI: Sleep Button (CM) [SLPB]
Aug 4 14:47:29 machine1600 kernel: ACPI: Fan [FN00] (off)
Aug 4 14:47:29 machine1600 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3
[C3])
Aug 4 14:47:29 machine1600 kernel: ACPI: Processor [CPU1] (supports 8
throttling states)
Aug 4 14:47:29 machine1600 kernel: ACPI: Thermal Zone [THRM] (45 C)
Aug 4 14:47:29 machine1600 kernel: ACPI: AC Adapter [AC0] (off-line)
Aug 4 14:47:29 machine1600 hotplug: Hotplug (acpi.rc) start: succeeded
Aug 4 14:47:29 machine1600 rc: Starting fbsetfont: succeeded
Aug 4 14:47:29 machine1600 acpid: acpid startup succeeded
Aug 4 14:47:29 machine1600 keytable: Loading keymap: ruwin_ct_sh-UTF-8
Aug 4 14:47:29 machine1600 loadkeys:
Loading /usr/lib/kbd/keymaps/i386/qwerty/ruwin_ct_sh-UTF-8.kmap.gz
Aug 4 14:47:29 machine1600 setsyskeytable: Loading keymap: ruwin_ct_sh-UTF-8
succeeded
Aug 4 14:47:29 machine1600 keytable: ^[[73G
Aug 4 14:47:29 machine1600 keytable: [
Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m
Aug 4 14:47:29 machine1600 keytable: DONE
Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m
Aug 4 14:47:29 machine1600 keytable: Loading compose keys: compose.latin.inc
Aug 4 14:47:29 machine1600 loadkeys:
Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz
Aug 4 14:47:29 machine1600 setsyskeytable: Loading compose keys:
compose.latin.inc succeeded
Aug 4 14:47:29 machine1600 keytable: ^[[73G
Aug 4 14:47:29 machine1600 keytable: [
Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m
Aug 4 14:47:29 machine1600 keytable: DONE
Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m
Aug 4 14:47:29 machine1600 keytable: Binding extra Win keys, loading:
windowkeys-compose.inc
Aug 4 14:47:29 machine1600 loadkeys:
Loading /usr/lib/kbd/keymaps/i386/include/windowkeys-compose.inc.gz
Aug 4 14:47:29 machine1600 setsyskeytable: Binding extra Win keys, loading:
windowkeys-compose.inc succeeded
Aug 4 14:47:29 machine1600 keytable: ^[[73G
Aug 4 14:47:29 machine1600 keytable: [
Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m
Aug 4 14:47:29 machine1600 keytable: DONE
Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m
Aug 4 14:47:29 machine1600 keytable: The BackSpace key sends: ^? loading
delete.inc
Aug 4 14:47:29 machine1600 loadkeys:
Loading /usr/lib/kbd/keymaps/i386/include/delete.inc.gz
Aug 4 14:47:29 machine1600 setsyskeytable: The BackSpace key sends: ^?
loading delete.inc succeeded
Aug 4 14:47:29 machine1600 keytable: ^[[73G
Aug 4 14:47:29 machine1600 keytable: [
Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m
Aug 4 14:47:29 machine1600 keytable: DONE
Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m
Aug 4 14:47:29 machine1600 rc: Starting keytable: succeeded
Aug 4 14:47:29 machine1600 update_wms: Updating Window Manager Sessions:
succeeded
Aug 4 14:47:29 machine1600 gpm[5118]: Started gpm successfully. Entered
daemon mode.
Aug 4 14:47:29 machine1600 gpm: gpm startup succeeded
Aug 4 14:47:30 machine1600 crond[5148]: (CRON) STARTUP (V5.0)
Aug 4 14:47:30 machine1600 crond: crond startup succeeded
Aug 4 14:47:30 machine1600 anacron[5175]: Anacron 2.3 started on `2006-08-04
14:47:30'
Aug 4 14:47:30 machine1600 anacron: anacron startup succeeded
Aug 4 14:47:30 machine1600 anacron[5175]: Normal exit (0 jobs run)
Aug 4 14:47:30 machine1600 xfs: xfs startup succeeded
Aug 4 14:47:30 machine1600 dm: rundm startup succeeded
Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path
element /usr/X11R6/lib/X11/fonts/75dpi:unscaled (unreadable)
Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path
element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable)
Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path
element /usr/X11R6/lib/X11/fonts/Speedo (unreadable)
Aug 4 14:47:32 machine1600 messagebus: dbus-daemon startup succeeded
Aug 4 14:47:32 machine1600 kdm_config[5613]: Unrecognized key 'UseLilo' in
section [Shutdown] at /etc/X11/kdm/kdmrc:19
Aug 4 14:47:34 machine1600 fstab-sync[5642]: removed all generated mount
points
Aug 4 14:47:35 machine1600 hal: hald startup succeeded
Aug 4 14:47:35 machine1600 xinetd: xinetd startup succeeded
Aug 4 14:47:36 machine1600 rc: Starting rawdevices: succeeded
Aug 4 14:47:36 machine1600 kernel: fglrx: module license 'Proprietary. (C)
2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Aug 4 14:47:36 machine1600 kernel: [fglrx] Maximum main memory to use for
locked dma buffers: 315 MBytes.
Aug 4 14:47:36 machine1600 kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI
17 (level, low) -> IRQ 17
Aug 4 14:47:36 machine1600 kernel: [fglrx] module loaded - fglrx 8.18.6 [Oct
11 2005] on minor 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] free PCIe = 54804480
Aug 4 14:47:36 machine1600 kernel: [fglrx] max PCIe = 54804480
Aug 4 14:47:36 machine1600 kernel: [fglrx] free LFB = 119828480
Aug 4 14:47:36 machine1600 kernel: [fglrx] max LFB = 119828480
Aug 4 14:47:36 machine1600 kernel: [fglrx] free Inv = 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] max Inv = 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] total Inv = 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] total TIM = 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] total FB = 0
Aug 4 14:47:36 machine1600 kernel: [fglrx] total PCIe = 16384
Aug 4 14:47:38 machine1600 kernel: lp0: using parport0 (interrupt-driven).
Aug 4 14:47:38 machine1600 kernel: lp0: console ready
Aug 4 14:47:38 machine1600 cups: cupsd startup succeeded
Aug 4 14:47:38 machine1600 powersaved: powersaved startup succeeded
Aug 4 14:47:38 machine1600 postfix: Adjusting environment for postfix:
succeeded
Aug 4 14:47:39 machine1600 postfix: Checking postfix configuration: succeeded
Aug 4 14:47:39 machine1600 postfix: Starting postfix: succeeded
Aug 4 14:47:39 machine1600 slmodemd: Starting slmodem daemon: succeeded
Aug 4 14:47:40 machine1600 nmbd[6178]: [2006/08/04 14:47:40, 0]
nmbd/nmbd_subnetdb.c:create_subnets(217)
Aug 4 14:47:40 machine1600 nmbd[6178]: create_subnets: No local
interfaces !
Aug 4 14:47:40 machine1600 nmbd[6178]: [2006/08/04 14:47:40, 0]
nmbd/nmbd_subnetdb.c:create_subnets(218)
Aug 4 14:47:40 machine1600 nmbd[6178]: create_subnets: Waiting for an
interface to appear ...
Aug 4 14:47:41 machine1600 xinetd[5701]: 5701 {init_services} no services.
Exiting...
Aug 4 14:47:43 machine1600 smb: CIFS startup succeeded
Aug 4 14:47:44 machine1600 winbindd[6201]: [2006/08/04 14:47:44, 0]
nsswitch/winbindd_util.c:winbindd_param_init(555)
Aug 4 14:47:44 machine1600 winbindd[6201]: winbindd: idmap uid range
missing or invalid
Aug 4 14:47:44 machine1600 winbindd[6201]: [2006/08/04 14:47:44, 0]
nsswitch/winbindd_util.c:winbindd_param_init(556)
Aug 4 14:47:44 machine1600 winbindd[6201]: winbindd: cannot continue,
exiting.
Aug 4 14:47:44 machine1600 winbind: Winbind startup succeeded
Aug 4 14:48:00 machine1600 pam_tcb[5620]: kde: Authentication passed for
dmitriy from (uid=0)
Aug 4 14:48:00 machine1600 pam_tcb[5620]: kde: Session opened for dmitriy by
(uid=0)
Aug 4 14:48:38 machine1600 pam_tcb[6468]: su: Authentication passed for root
from (uid=500)
Aug 4 14:48:38 machine1600 pam_tcb[6468]: su: Session opened for root by
(uid=500)
Aug 4 14:57:23 machine1600 pam_tcb[6479]: kscreensaver: Authentication passed
for dmitriy from (uid=500)
Aug 4 15:00:07 machine1600 kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
Aug 4 15:00:07 machine1600 ifplugd(eth0)[4530]: Link beat detected.
Aug 4 15:00:08 machine1600 ifplugd(eth0)[4530]: Executing
'/etc/net/scripts/ifplugd.action eth0 up'.
Aug 4 15:00:08 machine1600 kernel: NET: Registered protocol family 17
Aug 4 15:00:08 machine1600 dhcpcd.exe: interface eth0 has been configured
with old IP=192.168.0.143
Aug 4 15:00:09 machine1600 ifplugd(eth0)[4530]: Program executed
successfully.
Aug 4 15:01:01 machine1600 pam_tcb[6633]: crond: Session opened for root by
(uid=0)
Aug 4 15:01:01 machine1600 crond[6635]: (root) CMD
(run-parts /etc/cron.hourly)
Aug 4 15:01:01 machine1600 pam_tcb[6633]: crond: Session closed for root
Aug 4 15:06:00 machine1600 nmbd[6178]: [2006/08/04 15:06:00, 0]
nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
Aug 4 15:06:00 machine1600 nmbd[6178]: *****
---------------------------------------------------------------------------------------------------------------------------
С уважением.
Антипов Дмитрий
itadmin@mail.ru
ICQ 326393631
--------------------------------------------------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
2006-08-04 18:39 [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0 Dmitriy
@ 2006-08-07 8:34 ` Sergey Vlasov
2006-08-07 19:11 ` Dmitriy
2006-08-08 12:54 ` dmitriy
1 sibling, 1 reply; 6+ messages in thread
From: Sergey Vlasov @ 2006-08-07 8:34 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 2076 bytes --]
On Fri, Aug 04, 2006 at 10:39:24PM +0400, Dmitriy wrote:
> Есть ноутбук ASUS A6R + установлен ALC 3.0 DVD9 edition , на борту имеем :
[...]
> vendor_id : GenuineIntel
> cpu family : 6
> model : 13
> model name : Intel(R) Celeron(R) M processor 1.60GHz
> stepping : 8
[...]
> Из этого не работает:
> 1. POWERSAVED = cooler постоянно крутит при любой схеме управления питанием
> ->log->
> ]# powersave -F
> Fan no 0: off
>
> ]# powersave -T
> Thermal Device no. 0:
> Temperature: 52
> Critical: 105
> Passive: 100
> Active 0: 60
С этим часто бывают проблемы, не всегда решаемые (всё зависит от того,
что натворили разработчики BIOS).
> А также не подерживался SPEEDSTEPING пока я незагрузил модуль P4-CLOCKMOD ,
> хотя на сколько это правельно незнаю ?
От p4-clockmod толку мало; попробуйте либо speedstep-centrino, либо
acpi-cpufreq (хотя вроде бы у Celeron M speedstep как раз обрезан).
> 2. WI-FI = 0000:02:03.0 Network controller: Broadcom Corporation BCM4318
> [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
> в дистре драйверов нет, но есть платные на LINUXANT и это проблема ! через
> NDISWRAPPER непробывал и ещё незнаю как .
Linuxant предлагает driverloader, который на самом деле делает
примерно то же, что и ndiswrapper.
Вообще драйвер для подобных контроллеров появился в ядре 2.6.17;
насколько хорошо он работает - не знаю.
> 3. MODEM = 0000:00:14.6 ATI Technologies Inc ATI SB400 - AC'97 Modem
> Controller (rev 02)
> тоже самое есть на LINUXANT, но есть модуль SND_ATIIXP_MODEM который загружен
> по дефаулту.
Покажите, что в файлах /proc/asound/card*/codec97*/ac97* (*+regs пока
не надо). Если для модема показывает кодек Conexant - это плохо, с
ними работает только драйвер с linuxant.com. С другими кодеками может
заработать и slmodem.
> 4. SOUND = 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP
> SB400 AC'97 Audio Controller (rev 02)
А с ним что - просто тишина? Покажите ещё вывод amixer contents.
[...]
[-- Attachment #2: Type: application/pgp-signature, Size: 191 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
2006-08-07 19:11 ` Dmitriy
@ 2006-08-07 15:56 ` Sergey Vlasov
0 siblings, 0 replies; 6+ messages in thread
From: Sergey Vlasov @ 2006-08-07 15:56 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 858 bytes --]
On Mon, Aug 07, 2006 at 11:11:24PM +0400, Dmitriy wrote:
> В сообщении от 7 Август 2006 12:34 Sergey Vlasov написал(a):
> > On Fri, Aug 04, 2006 at 10:39:24PM +0400, Dmitriy wrote:
> > > Есть ноутбук ASUS A6R + установлен ALC 3.0 DVD9 edition , на борту
>
> > Покажите, что в файлах /proc/asound/card*/codec97*/ac97* (*+regs пока
> > не надо). Если для модема показывает кодек Conexant - это плохо, с
> > ними работает только драйвер с linuxant.com. С другими кодеками может
> > заработать и slmodem.
> ]# cat /proc/asound/card0/codec97#0/ac97#0-0
> 0-0/0: Analog Devices AD1986
Это звуковая часть; а в /proc/asound/card1 нет аналогичных файлов?
Хотя, возможно, всё-таки придётся переходить на kernel-modules-alsa
1.0.11.
По поводу звука - попробуйте поднять регулятор Headphone, если он там
есть, и попереключать External Amplifier.
[-- Attachment #2: Type: application/pgp-signature, Size: 191 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
2006-08-07 8:34 ` Sergey Vlasov
@ 2006-08-07 19:11 ` Dmitriy
2006-08-07 15:56 ` Sergey Vlasov
0 siblings, 1 reply; 6+ messages in thread
From: Dmitriy @ 2006-08-07 19:11 UTC (permalink / raw)
To: ALT Linux Community
В сообщении от 7 Август 2006 12:34 Sergey Vlasov написал(a):
> On Fri, Aug 04, 2006 at 10:39:24PM +0400, Dmitriy wrote:
> > Есть ноутбук ASUS A6R + установлен ALC 3.0 DVD9 edition , на борту
> Покажите, что в файлах /proc/asound/card*/codec97*/ac97* (*+regs пока
> не надо). Если для модема показывает кодек Conexant - это плохо, с
> ними работает только драйвер с linuxant.com. С другими кодеками может
> заработать и slmodem.
]# cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Analog Devices AD1986
PCI Subsys Vendor: 0x1043
PCI Subsys Device: 0x1183
Revision : 0x02
Compat. Class : 0x00
Subsys. Vendor ID: 0x0000
Subsys. ID : 0x0000
Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Double rate slots: 10/11
Extended ID : codec=0 rev=2 AMAP LDAC SDAC CDAC DSA=0 DRA VRA
Extended status : LDAC SDAC CDAC VRA
PCM front DAC : 44100Hz
PCM Surr DAC : 44100Hz
PCM LFE DAC : 44100Hz
PCM ADC : 48000Hz
Gain Inverted Buffer delay Location
Master Out : 0.0 dBV - 16/fs Rear I/O Panel
AUX Out : 0.0 dBV - 16/fs Rear I/O Panel
Center/LFE Out : 0.0 dBV - 16/fs Rear I/O Panel
Mic 1 : 0.0 dBV - 16/fs Rear I/O Panel
Mic 2 : 0.0 dBV - 16/fs Rear I/O Panel
Line In : 0.0 dBV - 16/fs Rear I/O Panel
AD18XX configuration
Unchained : 0x1000,0x0000,0x0000
Chained : 0x0000,0x0000,0x0000
--------------------------------------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
2006-08-04 18:39 [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0 Dmitriy
2006-08-07 8:34 ` Sergey Vlasov
@ 2006-08-08 12:54 ` dmitriy
2006-08-08 19:50 ` Michael Shigorin
1 sibling, 1 reply; 6+ messages in thread
From: dmitriy @ 2006-08-08 12:54 UTC (permalink / raw)
To: ALT Linux Community
Sergey Vlasov спасибо за помощь.
Я решил все свои проблемы с нерабочими девайсами на новых нотишах установив
OS под которую изначально производители hardware затачивали на все 100% свои
детища,полгода потраченное на эту неравную борьбу даром не прошли, но надо
делать бизнес а не париться с настройками новых устройств.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0
2006-08-08 12:54 ` dmitriy
@ 2006-08-08 19:50 ` Michael Shigorin
0 siblings, 0 replies; 6+ messages in thread
From: Michael Shigorin @ 2006-08-08 19:50 UTC (permalink / raw)
To: ALT Linux Community
On Tue, Aug 08, 2006 at 04:54:11PM +0400, dmitriy wrote:
> Я решил все свои проблемы с нерабочими девайсами на новых
> нотишах установив OS под которую изначально производители
> hardware затачивали на все 100% свои детища,полгода потраченное
> на эту неравную борьбу даром не прошли, но надо делать бизнес а
> не париться с настройками новых устройств.
Бывает, просто с железками, особенно сильно свежими или
мобильными, приходится быть аккуратным и перед покупкой
хотя бы кноппикс туда засунуть...
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-08-08 19:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-04 18:39 [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0 Dmitriy
2006-08-07 8:34 ` Sergey Vlasov
2006-08-07 19:11 ` Dmitriy
2006-08-07 15:56 ` Sergey Vlasov
2006-08-08 12:54 ` dmitriy
2006-08-08 19:50 ` Michael Shigorin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git