[Comm] cdrecord failed

[Comm] cdrecord failed

[Dmitry Kovalsky]

Привет 

cdrecord работает на приводе Aopen-4852
 и использую диски СДР самсунг (наверно не оригинальные) но ена них написано 
48х

при записи на 36х вываливаються записи (да и на  24 скоростях тоже)

вопрос как то можно пределить это изза привода или изза дисков?

вот вывод cdrecrod


[root@violet tmp]# cdrecord dev=0,0 -dummy -v speed=36 
cdboImage_4_30_19_35_48.iso
Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'AOPEN   '
Identifikation : 'CD-RW CRW4852   '
Revision       : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   676 MB
Total size:      777 MB (77:00.40) = 346530 sectors
Lout start:      777 MB (77:02/30) = 346530 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 13317
Forcespeed is OFF.
Starting to write CD/DVD at speed 36 in dummy TAO mode for single session.
Last chance to quit, starting dummy write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 0
Track 01:  611 of  676 MB written (fifo 100%) [buf  98%]  32.3x.cdrecord: 
Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 04 C7 E5 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 05 00 04 C7 E5 0C 00 00 00 00 10 02 00 00
Sense Key: 0x5 Illegal Request, deferred error, Segment 0
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 
0x0
Sense flags: Blk 313317 (valid)
cmd finished after 0.031s timeout 40s

write track data: error after 641673216 bytes
Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
Writing  time:  187.630s
Average write speed  24.6x.
Min drive buffer fill was 39%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.004s
cdrecord: fifo had 10171 puts and 10108 gets.
cdrecord: fifo was 0 times empty and 5917 times full, min fill was 87%.
[root@violet tmp]#

Дима


E-mail: dikov@imbg.org.ua
Fax:  +380 (44) 266-0759
Tel.: +380 (44) 266-5589

[Comm] Re: cdrecord failed

[Michael Shigorin]

On Wed, Apr 30, 2003 at 08:17:22PM +0300, Dmitry Kovalsky wrote:
> [root@violet tmp]# cdrecord dev=0,0 -dummy -v speed=36 

-speed=NN

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/