[Comm] Adptec AHA-1540CF/1542CF Problem

[Comm] Adptec AHA-1540CF/1542CF Problem

[Remezow Igor]

[-- Attachment #1: Type: text/plain, Size: 537 bytes --]

Здравствуйте All!

При установке ALT Linux Junior 2.1 Home PC Magazine Edition не
понимает SCSI Adptec AHA-1540CF/1542CF. Хотя среди поддерживаемых
устройств AHA-1540 присутсвовал.
Пробовал поставить 152х, 165х - безрезультатно. Что делать-то?
В linux'e новичок, где копать толком не знаю. Помогите решить
проблему.
До кучи прилагаю вывод dmesq после установки Linux.

PS: Мылю пока из-под виндов :(, поэтому если что-то не так - дайте
знать. Спасибо.


-- 
С уважением,
  Remezow Igor           4 февраля 2003 г.

mailto:RemIgor@mail.ru

[-- Attachment #2: dmesq.txt --]
[-- Type: text/plain, Size: 7428 bytes --]

Linux version 2.4.18-alt8hpc-up (goldhead@archy.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-ipl15mdk)) #1 Tue Oct 1 17:40:36 MSD 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
 BIOS-e820: 000000000bff0000 - 000000000bff3000 (ACPI NVS)
 BIOS-e820: 000000000bff3000 - 000000000c000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 49152
zone(0): 4096 pages.
zone(1): 45056 pages.
zone(2): 0 pages.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux-up ro root=303 mem=192M fbprogress=/dev/tty10
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 350.800 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 190716k/196608k available (915k kernel code, 5504k reserved, 266k data, 752k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.5.1 initialized
vesafb: framebuffer at 0xe6000000, mapped to 0x8c800000, size 8192k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:7860
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
block: 256 slots per queue, batch=64
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 11
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPC3064AT, ATA DISK drive
hdb: IBM-DTLA-307015, ATA DISK drive
hdd: TEAC CD-552E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue 803294e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 12672450 sectors (6488 MB), CHS=788/255/63, UDMA(33)
blk: queue 8032962c, I/O limit 4095Mb (mask 0xffffffff)
hdb: 30003120 sectors (15362 MB) w/1916KiB Cache, CHS=1867/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
NET4: Frame Diverter 0.46
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
RAMDISK: Compressed image found at block 0
Uncompressing.....done.
Freeing initrd memory: 128k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 752k freed
Warning: unable to open an initial console.
Executing init=/sbin/init
Real Time Clock Driver v1.10e
Adding Swap: 385552k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 150M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:05:07 Oct  1 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:02.2
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
isapnp: Scanning for PnP cards...
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c-ml (2001-11-27) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Legacy device
inserting floppy driver for 2.4.18-alt8hpc-up
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
divert: allocating divert_blk for eth0
eth0: 3c5x9 at 0x220, BNC port, address  00 a0 24 3c 7a b9, IRQ 10.
3c509.c:1.18a 17Nov2001becker@scyld.com
http://www.scyld.com/network/3c509.html
eth0: Setting Rx mode to 1 addresses.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
es1371: version v0.30 time 18:02:35 Oct  1 2002
PCI: Found IRQ 9 for device 00:0e.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
es1371: found es1371 rev 6 at io 0xe400 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x4352:0x5903 (Cirrus Logic CS4297)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Legacy device
lp0: using parport0 (polling).
lp0: compatibility mode
lp0: compatibility mode
lp0: compatibility mode
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
cdrom: open failed.
cdrom: open failed.
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0