ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Q: Junior kernel 2.4.18-alt7 configuration
@ 2002-10-22 19:17 Andrey Liakhovets
  2002-10-22 19:40 ` Maksim Otstavnov
  0 siblings, 1 reply; 2+ messages in thread
From: Andrey Liakhovets @ 2002-10-22 19:17 UTC (permalink / raw)
  To: community

Здравствуйте.

Извините за forwarding, но не мог бы кто-нибудь ответить
на вопрос Марвина (см. ниже полностью):

|Could some advanced Mandrake User get kernel configuration info on
|"mandrake ALT Linux Junior2.4.18-alt7junior-up"
|...
|> > But there should be a file /boot/config-SomeVersion ,
|...
|> > Do :
|> > # cp /boot/config-SomeVersion /root/
|> > # gzip config-SomeVersion
|> > Then send me config-SomeVersion.gz

Наверное, ответ можно послать мне лично, с уведомлением
в рассылку (чтобы я не получил очень много ответов),
или -- прямо в рассылку linmodems.

Андрей Ляховец


----- Original Message -----
From: "Marvin Stodolsky" <stodolsk@rcn.com>
To: "Чирский Ження" <coolwriter@tut.by>; "LinModems" <discuss@linmodems.org>
Sent: Sunday, October 20, 2002 9:12 PM
Subject: Advanced Mandrake users Re: Lucent modem, mandrake ALT Linux Junior2.4.18-alt7junior-up


Could some advanced Mandrake User get kernel configuration info on
"mandrake ALT Linux Junior2.4.18-alt7junior-up"  so that a drivers can
be assembled for Чирский Ження

MarvS
======================

>"Чирский Ження" wrote:
>
> Idon't hafe file /boot/config-SomeVersion;
> The query:
 ls /lib/modules
returned
  2.4.18-alt7junior-up
>
> On Sat, 19 Oct 2002 16:46:48 -0400
>  Marvin Stodolsky <stodolsk@rcn.com> wrote:
> > coolwriter,
> >
> > There are two problem areas.
> > The worst one is:
> > -----------------
> > The 11c1:0442 modems have an electro-optical coupling
> > which in some hardware is not  adequately supported by
> > these drivers.
> > -----------------
> > that we of no case for which the modem drivers have
> > supported this
> > modem.
> >
> > The secondary problem is that your  "mandrake ALT Linux
> > Junior" is so
> > different from regular Mandrake installations, that many
> > useful
> > diagnostics were not returned by ./build_module.
> >
> > But there should be a file /boot/config-SomeVersion ,
> > which starts
> > something like:
> > ===========
> > #
> > # Automatically generated make config: don't edit
> > #
> > CONFIG_X86=y
> > CONFIG_ISA=y
> > # CONFIG_SBUS is not set
> > CONFIG_UID16=y
> >
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> >
> > #
> > # Loadable module support
> > #
> > CONFIG_MODULES=y
> > CONFIG_MODVERSIONS=y
> > CONFIG_KMOD=y
> >
> > #
> > # Processor type and features
> > ===========
> >
> > Do :
> > # cp /boot/config-SomeVersion /root/
> > # gzip config-SomeVersion
> > Then send me config-SomeVersion.gz
> >
> > and I'll build drivers for you so that a test can be run.
> > Also what is returned by the query
> > #  ls /lib/modules/
> >
> > MarvS
> >
> >
> >
> > >"Чирский Ження" wrote:
> > >
> > > Linux Newbies should check DOCs/Installers and if still
> > > necessary
> > >         http://www.heby.de/ltmodem for already
> > available driver
> > > installers
> > >
> > > Together with information included in DOCs/,
> > > this report may enable you to solve problems.
> > > But if further help is needed, send BLDrecord.txt to
> > > discuss@linmodems.org
> > > Please use the following in the email Subject Line:
> > > Lucent modem, mandrake ALT Linux Junior
> > > 2.4.18-alt7junior-up
> > > DISTRO=mandrake-release
> > > DISTR=mandrake
> > > DVERSION=ALT Linux Junior
> > > ACTION=./build_module
> > > WHOAMI=root
> > > Sat Oct 19 11:31:06 EEST 2002
> > > Linux localhost.localdomain 2.4.18-alt7junior-up #1 Wed
> > Jun
> > > 5 23:27:03 MSD 2002 i686 unknown
> > >
> > > BN=build_module
> > > LSPCI=/usr/bin/lspci
> > > TMPM=tmpfile
> > >
> > > By the  Class 07nn: criteria, detected system PCI modem
> > > devices are:
> > >
> > > device  Class   VendorID:DeviceID == ModemID
> > >
> >
> ----------------------------------------------------------------
> > > 02:09.0 Class 0780: 11c1:0442 (rev 01)
> > > 02:09.0 Communication controller: Lucent
> > Microelectronics
> > > 56k WinModem (rev 01)
> > > VENDOR 0x11c1     DEVICE 0x0442
> > > ID are within the serviced ranges:
> > >
> > > IDs of supported Lucent DSP PCI modems have ranges:
> > > Vendor  vendor_id   device_id range
> > > -----------------------------------------------
> > > LUCENT 0x11c1          0x0440-0x045c
> > > XIRCOM 0x115d          0x0000-0x000F
> > > XIRCOM 0x115d          0x0440-0x045c
> > > XIRCOM 0x115d          0x0010-0x03ff
> > >
> > > VENDOR=LUCENT with MODEM_ID=11c1:0442
> > > ----------------------------------------------
> > > MODEL_DATA= 0x0442 -- Mars 2 - data/fax/tam only
> > > 02:09.0 Communication controller: Lucent
> > Microelectronics
> > > 56k WinModem (rev 01)
> > > 02:09.0 Class 0780: 11c1:0442 (rev 01)
> > >         Subsystem: 11c1:0440
> > >         Control: I/O+ Mem+ BusMaster+ SpecCycle-
> > MemWINV-
> > > VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > >         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> > DEVSEL=medium
> > > >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > >         Latency: 0 (63000ns min, 3500ns max)
> > >         Interrupt: pin A routed to IRQ 5
> > >         Region 0: Memory at e6000000 (32-bit,
> > non-prefetchable)
> > > [size=256]
> > >         Region 1: I/O ports at c000 [size=8]
> > >         Region 2: I/O ports at c400 [size=256]
> > >         Capabilities: [f8] Power Management version 2
> > >                 Flags: PMEClk- DSI+ D1- D2+
> > AuxCurrent=0mA
> > > PME(D0-,D1-,D2+,D3hot+,D3cold+)
> > >                 Status: D0 PME-Enable- DSel=0 DScale=0
> > PME-
> > >
> > > ----------------------------------------------
> > > The 11c1:0442 modems have an electro-optical coupling
> > > which in some hardware is not  adequately supported by
> > > these drivers.
> > > There will likely be a failure of the drivers to
> > recognize
> > > the modem.
> > > Browse within DOCs/Insert-param4.txt
> > >
> > > Get Lucent/Agere information at:
> > >
> >
>         http://www.agere.com/support/client/modem_drivers.html
> > > INQUIRE=2.4.18_alt7junior
> > > Compiling appears necessary, as a candidate installer
> > is
> > > not evident.
> > > BASE=source
> > > # ===SETTINGS===
> > > LT_SERIAL_MODULE="lt_serial"
> > > LT_PROPRIETARY_MODULE="lt_modem"
> > > DOCS="1ST-READ CHANGELOG UPDATES-BUGS DOCs utils"
> > > LT_VERSION="8.22a5"
> > >
> > > Read in DOCs/ ForNewbies, Compile-Properly.txt and
> > > Flavor.txt
> > >
> > > #===== ltinst2 section =====
> > >
> > > LT_MODEM=
> > > LT_SERIAL=
> > >
> > > DEPMOD_LT_NEW=passed
> > >
> > > The drivers can be removed from the modules search PATH
> > > with:    ./ltuninst2
> > >
> > >
> >
>   ------------------------------------------------------------------------
> > >                     Name: BLDrecord.txt
> > >    BLDrecord.txt    Type: Plain Text (text/plain)
> > >                 Encoding: base64
> >
> >








^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Comm] Q: Junior kernel 2.4.18-alt7 configuration
  2002-10-22 19:17 [Comm] Q: Junior kernel 2.4.18-alt7 configuration Andrey Liakhovets
@ 2002-10-22 19:40 ` Maksim Otstavnov
  0 siblings, 0 replies; 2+ messages in thread
From: Maksim Otstavnov @ 2002-10-22 19:40 UTC (permalink / raw)
  To: community

Hello Andrey,

Tuesday, October 22, 2002, 11:17:06 PM, you wrote:

AL> Здравствуйте.

AL> Извините за forwarding, но не мог бы кто-нибудь ответить
AL> на вопрос Марвина

...Минского?

:/

-- 
-- Maksim




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-10-22 19:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-10-22 19:17 [Comm] Q: Junior kernel 2.4.18-alt7 configuration Andrey Liakhovets
2002-10-22 19:40 ` Maksim Otstavnov

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git