* [Sysadmins] cacti не рисует графики @ 2011-08-22 7:08 Jurij Bogaevs'kyj 2011-08-22 9:33 ` Dubrovskiy Viacheslav 2011-08-22 9:39 ` Sergey 0 siblings, 2 replies; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-22 7:08 UTC (permalink / raw) To: sysadmins Доброго времени суток всем. Имеется сервер на п5. Кактус успешно работал, но случайно, при установке какого то пакет потянулось обновление версий apache и php5, которые текущие на данный момент в этом бранче.(п5) После чего кактус перестал рисовать (и даже отображать) графики. То есть на месте графиком просто пустые места. Пуллер по какой то причине ожидает выполнения, а потом валиться по таймауту и все (в логах ничего). Установлены следующие версии пакетов: rpm -qa | grep apache2 apache2-cgi-bin-printenv-2.2.19-alt2.M51.1 apache2-html-2.2.19-alt2.M51.1 apache2-htcacheclean-2.2.19-alt2.M51.1 apache2-datadirs-2.2.19-alt2.M51.1 apache2-2.2.19-alt2.M51.1 apache2-base-2.2.19-alt2.M51.1 apache2-httpd-worker-2.2.14-alt4 apache2-common-2.2.19-alt2.M51.1 apache2-cgi-bin-test-cgi-2.2.19-alt2.M51.1 apache2-full-2.2.19-alt2.M51.1 apache2-mod_disk_cache-2.2.19-alt2.M51.1 apache2-mod_php5-5.2.14.20100721-alt0.M51.1 apache2-httpd-prefork-2.2.14-alt4 apache2-icons-2.2.14-alt4 apache2-cgi-bin-2.2.19-alt2.M51.1 typo3-apache2-4.3.7-alt1 rpm -qa | grep php5 cacti-config-php5-0.8.7f-alt0.M50P.1 php5-cgi-5.2.14.20100721-alt0.M51.1 php5-pdo_mysql-5.2.14.20100721-alt0.M51.1 php5-libs-5.2.14.20100721-alt0.M51.1 php5-sockets-5.2.14.20100721-alt0.M51.1 php5-gd2-5.2.14.20100721-alt0.M51.1 php5-mysql-5.2.14.20100721-alt0.M51.1 php5-suhosin-0.9.31-alt0.M51.1 php5-adodb-5.10-alt0.M50P.1 php5-curl-5.2.14.20100721-alt0.M51.1 php5-openssl-5.2.14.20100721-alt0.M51.1 php5-dom-5.2.14.20100721-alt0.M51.1 php5-5.2.14.20100721-alt0.M51.1 php5-mbstring-5.2.14.20100721-alt0.M51.1 apache2-mod_php5-5.2.14.20100721-alt0.M51.1 php5-snmp-5.2.14.20100721-alt0.M51.1 php5-pdo-5.2.14.20100721-alt0.M51.1 php5-pdo_pgsql-5.2.14.20100721-alt0.M51.1 rpm -qa | grep cacti cacti-config-php5-0.8.7f-alt0.M50P.1 cacti-setup-0.8.7f-alt0.M50P.1 cacti-doc-0.8.7f-alt0.M50P.1 cacti-0.8.7f-alt0.M50P.1 Куда копать? -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-22 7:08 [Sysadmins] cacti не рисует графики Jurij Bogaevs'kyj @ 2011-08-22 9:33 ` Dubrovskiy Viacheslav 2011-08-22 9:39 ` Sergey 1 sibling, 0 replies; 14+ messages in thread From: Dubrovskiy Viacheslav @ 2011-08-22 9:33 UTC (permalink / raw) To: ALT Linux sysadmins' discussion [-- Attachment #1: Type: text/plain, Size: 299 bytes --] 22.08.2011 03:08, Jurij Bogaevs'kyj пишет: > > Куда копать? > в логи После обновления php конфиги могут побиться. Нужно проверить запускается ли консольный php вообще. -- WBR, Dubrovskiy Viacheslav [-- Attachment #2: ÐÑипÑогÑаÑиÑеÑÐºÐ°Ñ Ð¿Ð¾Ð´Ð¿Ð¸ÑÑ S/MIME --] [-- Type: application/pkcs7-signature, Size: 4903 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-22 7:08 [Sysadmins] cacti не рисует графики Jurij Bogaevs'kyj 2011-08-22 9:33 ` Dubrovskiy Viacheslav @ 2011-08-22 9:39 ` Sergey 2011-08-23 20:46 ` Jurij Bogaevs'kyj 1 sibling, 1 reply; 14+ messages in thread From: Sergey @ 2011-08-22 9:39 UTC (permalink / raw) To: sysadmins On Monday, August 22, 2011, Jurij Bogaevs'kyj wrote: > Куда копать? Я бы начал со сравнения старого и нового конфигов php. Скорее всего, в конфиге по-умолчанию что-то не включено, а php обновляется так, что у него конфиг лежит в /etc/php/<version>, соответственно, старый конфиг просто не используется. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-22 9:39 ` Sergey @ 2011-08-23 20:46 ` Jurij Bogaevs'kyj 2011-08-23 20:56 ` Dubrovskiy Viacheslav 0 siblings, 1 reply; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-23 20:46 UTC (permalink / raw) To: sysadmins 22.08.11 12:39, Sergey написав(ла): > On Monday, August 22, 2011, Jurij Bogaevs'kyj wrote: > >> Куда копать? > > Я бы начал со сравнения старого и нового конфигов php. Скорее всего, > в конфиге по-умолчанию что-то не включено, а php обновляется так, что > у него конфиг лежит в /etc/php/<version>, соответственно, старый конфиг > просто не используется. > Сравнение конфигов помогло, в том плане, что теперь пуллер отрабатывает успешно, однако графиков по-преженему не видно... -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-23 20:46 ` Jurij Bogaevs'kyj @ 2011-08-23 20:56 ` Dubrovskiy Viacheslav 2011-08-25 6:06 ` Jurij Bogaevs'kyj 0 siblings, 1 reply; 14+ messages in thread From: Dubrovskiy Viacheslav @ 2011-08-23 20:56 UTC (permalink / raw) To: ALT Linux sysadmins' discussion [-- Attachment #1: Type: text/plain, Size: 385 bytes --] 23.08.2011 16:46, Jurij Bogaevs'kyj пишет: > Сравнение конфигов помогло, в том плане, что теперь пуллер > отрабатывает успешно, однако графиков по-преженему не видно... > права проверьте на rrd и на генерируемые png. -- WBR, Dubrovskiy Viacheslav [-- Attachment #2: ÐÑипÑогÑаÑиÑеÑÐºÐ°Ñ Ð¿Ð¾Ð´Ð¿Ð¸ÑÑ S/MIME --] [-- Type: application/pkcs7-signature, Size: 4903 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-23 20:56 ` Dubrovskiy Viacheslav @ 2011-08-25 6:06 ` Jurij Bogaevs'kyj 2011-08-25 16:56 ` Sergey 2011-08-25 17:07 ` Alexey Shabalin 0 siblings, 2 replies; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-25 6:06 UTC (permalink / raw) To: sysadmins 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): > 23.08.2011 16:46, Jurij Bogaevs'kyj пишет: >> Сравнение конфигов помогло, в том плане, что теперь пуллер >> отрабатывает успешно, однако графиков по-преженему не видно... >> > права проверьте на rrd и на генерируемые png. > > На rrd впоряде, файли генерируются и на чтение тоже с доступом все ок, а где генерируемые png искать не подскажете? -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 6:06 ` Jurij Bogaevs'kyj @ 2011-08-25 16:56 ` Sergey 2011-08-25 20:24 ` Jurij Bogaevs'kyj 2011-08-25 17:07 ` Alexey Shabalin 1 sibling, 1 reply; 14+ messages in thread From: Sergey @ 2011-08-25 16:56 UTC (permalink / raw) To: ALT Linux sysadmins' discussion On Thursday 25 August 2011, Jurij Bogaevs'kyj wrote: > На rrd впоряде, файли генерируются и на чтение тоже с доступом > все ок, а где генерируемые png искать не подскажете? Когда-то я посмотрел-посмотрел на cacti, подумал, чем этот php может кончиться, и решил, что лучше посмотреть на что-то другое сразу. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 16:56 ` Sergey @ 2011-08-25 20:24 ` Jurij Bogaevs'kyj 2011-08-26 6:21 ` Sergey 0 siblings, 1 reply; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-25 20:24 UTC (permalink / raw) To: sysadmins 25.08.11 19:56, Sergey написав(ла): > On Thursday 25 August 2011, Jurij Bogaevs'kyj wrote: > >> На rrd впоряде, файли генерируются и на чтение тоже с доступом >> все ок, а где генерируемые png искать не подскажете? > > Когда-то я посмотрел-посмотрел на cacti, подумал, чем этот php > может кончиться, и решил, что лучше посмотреть на что-то другое > сразу. > И посмотрели? -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 20:24 ` Jurij Bogaevs'kyj @ 2011-08-26 6:21 ` Sergey 0 siblings, 0 replies; 14+ messages in thread From: Sergey @ 2011-08-26 6:21 UTC (permalink / raw) To: ALT Linux sysadmins' discussion On Friday, August 26, 2011, Jurij Bogaevs'kyj wrote: > > Когда-то я посмотрел-посмотрел на cacti, подумал, чем этот php > > может кончиться, и решил, что лучше посмотреть на что-то другое > > сразу. > > > И посмотрели? Да. Но есть нюанс. Коллектор - collectd, а вот с web-фронтендом, пока, хуже. У него в контрибах collection3 есть, как там написано, сделано наспех. В принципе, как rrd-браузер годится, но не сильно удобно местами, особенно, когда rrd-шек много. Сейчас collection4 в разработке, а я ещё, время от времени, пытаюсь реанимировать древний Bronc. В принципе, кое-что работает даже, но там очень приветствуется знание Perl и Mason. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 6:06 ` Jurij Bogaevs'kyj 2011-08-25 16:56 ` Sergey @ 2011-08-25 17:07 ` Alexey Shabalin 2011-08-25 21:04 ` Jurij Bogaevs'kyj 1 sibling, 1 reply; 14+ messages in thread From: Alexey Shabalin @ 2011-08-25 17:07 UTC (permalink / raw) To: ALT Linux sysadmins' discussion 25 августа 2011 г. 10:06 пользователь Jurij Bogaevs'kyj написал: > 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): >>> Сравнение конфигов помогло, в том плане, что теперь пуллер >>> отрабатывает успешно, однако графиков по-преженему не видно... >> права проверьте на rrd и на генерируемые png. > На rrd впоряде, файли генерируются и на чтение тоже с доступом все ок, а где > генерируемые png искать не подскажете? Давайте не будем гадать, а посмотрим в логи. -- Alexey Shabalin ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 17:07 ` Alexey Shabalin @ 2011-08-25 21:04 ` Jurij Bogaevs'kyj 2011-08-26 6:37 ` Yuriy Kashirin 0 siblings, 1 reply; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-25 21:04 UTC (permalink / raw) To: sysadmins 25.08.11 20:07, Alexey Shabalin написав(ла): > 25 августа 2011 г. 10:06 пользователь Jurij Bogaevs'kyj написал: >> 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): >>>> Сравнение конфигов помогло, в том плане, что теперь пуллер >>>> отрабатывает успешно, однако графиков по-преженему не видно... >>> права проверьте на rrd и на генерируемые png. >> На rrd впоряде, файли генерируются и на чтение тоже с доступом все ок, а где >> генерируемые png искать не подскажете? > > Давайте не будем гадать, а посмотрим в логи. > cat /var/log/cacti/cacti.log 08/25/2011 11:35:01 PM - POLLER: Poller[0] NOTE: Poller Int: '300', Cron Int: '300', Time Since Last: '300', Max Runtime '298', Poller Runs: '1' 08/25/2011 11:35:01 PM - POLLER: Poller[0] NOTE: There are no items in your poller for this polling cycle! 08/25/2011 11:35:01 PM - CMDPHP: Poller[0] Host[1] DS[3] CMD: perl /usr/share/cacti/scripts/linux_memory.pl MemFree:, output: 463628 08/25/2011 11:35:01 PM - CMDPHP: Poller[0] Host[1] DS[4] CMD: perl /usr/share/cacti/scripts/linux_memory.pl SwapFree:, output: 7614768 08/25/2011 11:35:01 PM - CMDPHP: Poller[0] Host[1] DS[5] CMD: perl /usr/share/cacti/scripts/loadavg_multi.pl, output: 1min:0.04 5min:0.17 10min:0.27 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[6] CMD: perl /usr/share/cacti/scripts/unix_users.pl , output: 1 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[29] SNMP: v2: 127.0.0.1, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.4, output: 126652315 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[29] SNMP: v2: 127.0.0.1, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.4, output: 209484245 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[30] SNMP: v2: 127.0.0.1, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.2, output: 4088730025 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[30] SNMP: v2: 127.0.0.1, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.2, output: 4048103342 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[37] SNMP: v2: 127.0.0.1, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.1, output: 135981656 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[33] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get available /dev/sda1, output: 90836004 08/25/2011 11:35:02 PM - POLLER: Poller[0] NOTE: There are no items in your poller for this polling cycle! 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[33] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get used /dev/sda1, output: 5178940 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[37] SNMP: v2: 127.0.0.1, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.1, output: 135981656 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[34] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get used /dev/sda2, output: 352589612 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[34] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get available /dev/sda2, output: 30091060 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[35] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get available /dev/sda3, output: 25302676 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Host[1] DS[35] CMD: perl /usr/share/cacti/scripts/query_unix_partitions.pl get used /dev/sda3, output: 72934032 08/25/2011 11:35:02 PM - CMDPHP: Poller[0] Time: 0.1878 s, Theads: N/A, Hosts: 1 08/25/2011 11:35:03 PM - SYSTEM STATS: Time:1.3874 Method:cmd.php Processes:1 Threads:N/A Hosts:3 HostsPerProcess:3 DataSources:16 RRDsProcessed:10 повторяется согласно расписанию, каждые 5 минут. Это то , что в общем логе, кроме строки которй пуллер стартует: 23:22:25 optymus suhosin[29477]: ALERT - function within blacklist called: popen() (attacker '95.81.63.211', file '/usr/share/cacti/lib/rrd.php', line 97) Aug 25 23:22:25 optymus suhosin[29478]: ALERT - function within blacklist called: popen() (attacker '95.81.63.211', file '/usr/share/cacti/lib/rrd.php', line 97) Aug 25 23:22:25 optymus suhosin[29476]: ALERT - function within blacklist called: popen() (attacker '95.81.63.211', file '/usr/share/cacti/lib/rrd.php', line 97) Aug 25 23:22:25 optymus suhosin[18240]: ALERT - function within blacklist called: popen() (attacker '95.81.63.211', file '/usr/share/cacti/lib/rrd.php', line 97) Это 97 и рядом с ней: /* an empty $rrdtool_pipe array means no fp is available */ if (!is_resource($rrdtool_pipe)) { session_write_close(); 97 $fp = popen(read_config_option("path_rrdtool") . escape_command(" $command_line"), $pipe_mode); if (!is_resource($fp)) { unset($fp); } -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-25 21:04 ` Jurij Bogaevs'kyj @ 2011-08-26 6:37 ` Yuriy Kashirin 2011-08-26 11:46 ` Alexey Shabalin 2011-08-26 13:29 ` Jurij Bogaevs'kyj 0 siblings, 2 replies; 14+ messages in thread From: Yuriy Kashirin @ 2011-08-26 6:37 UTC (permalink / raw) To: ALT Linux sysadmins' discussion On 26 августа 2011, Jurij Bogaevs'kyj wrote: > 25.08.11 20:07, Alexey Shabalin написав(ла): > > 25 августа 2011 г. 10:06 пользователь Jurij Bogaevs'kyj написал: > >> 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): > >>>> Сравнение конфигов помогло, в том плане, что теперь пуллер > >>>> отрабатывает успешно, однако графиков по-преженему не видно... > >>> > >>> права проверьте на rrd и на генерируемые png. > >> > >> На rrd впоряде, файли генерируются и на чтение тоже с доступом > >> все ок, а где генерируемые png искать не подскажете? > > > > Давайте не будем гадать, а посмотрим в логи. > > cat /var/log/cacti/cacti.log > > Aug 25 23:22:25 optymus suhosin[18240]: ALERT - function within > blacklist called: popen() (attacker '95.81.63.211', file > '/usr/share/cacti/lib/rrd.php', line 97) > Сейчас у Вас popen присутствует в php.ini в параметре suhosin.executor.func.blacklist Что у Вас скажет control apache2-mod_php5 ? Скорее всего после обновления стоило сказать control apache2-mod_php5 public ну или control apache2-mod_php5 relaxed -- Best regards Yuriy Kashirin ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-26 6:37 ` Yuriy Kashirin @ 2011-08-26 11:46 ` Alexey Shabalin 2011-08-26 13:29 ` Jurij Bogaevs'kyj 1 sibling, 0 replies; 14+ messages in thread From: Alexey Shabalin @ 2011-08-26 11:46 UTC (permalink / raw) To: ALT Linux sysadmins' discussion 26 августа 2011 г. 10:37 пользователь Yuriy Kashirin написал: > On 26 августа 2011, Jurij Bogaevs'kyj wrote: >> 25.08.11 20:07, Alexey Shabalin написав(ла): >> > 25 августа 2011 г. 10:06 пользователь Jurij Bogaevs'kyj написал: >> >> 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): >> >>>> Сравнение конфигов помогло, в том плане, что теперь пуллер >> >>>> отрабатывает успешно, однако графиков по-преженему не видно... >> >>> >> >>> права проверьте на rrd и на генерируемые png. >> >> >> >> На rrd впоряде, файли генерируются и на чтение тоже с доступом >> >> все ок, а где генерируемые png искать не подскажете? >> > >> > Давайте не будем гадать, а посмотрим в логи. >> >> cat /var/log/cacti/cacti.log >> >> Aug 25 23:22:25 optymus suhosin[18240]: ALERT - function within >> blacklist called: popen() (attacker '95.81.63.211', file >> '/usr/share/cacti/lib/rrd.php', line 97) тоже хотел посоветовать посмотреть на настройки suhosin. > > Сейчас у Вас popen присутствует в php.ini в параметре > suhosin.executor.func.blacklist > > Что у Вас скажет control apache2-mod_php5 ? > > Скорее всего после обновления стоило сказать > control apache2-mod_php5 public > ну или > control apache2-mod_php5 relaxed Ещё для информации. cacti криво работает с текущим net-snmp. Если графики были добавлены ранее, вроде все работает(потому и я это только сейчас заметил). А вот если попытаться сделать новые графики для железок(например сетевых интерфейсов), то в списке выводится полная чушь. быстрое решение - откатить версию net-snmp # rpm -e --nodeps libnet-snmp26-snmptrapd # rpm -Uvh --oldpackage libnet-snmp26_5.6.1-alt2_x86%5f64.rpm net-snmp-common_5.6.1-alt2_x86%5f64.rpm net-snmp-snmptrapd_5.6.1-alt2_x86%5f64.rpm perl-SNMP_5.6.1-alt2_x86%5f64.rpm net-snmp-clients_5.6.1-alt2_x86%5f64.rpm net-snmp-snmpd_5.6.1-alt2_x86%5f64.rpm net-snmp-utils_5.6.1-alt2_noarch.rpm net-snmp_5.6.1-alt2_noarch.rpm Сейчас буду разбираться, что же там такого обновили. -- Alexey Shabalin ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Sysadmins] cacti не рисует графики 2011-08-26 6:37 ` Yuriy Kashirin 2011-08-26 11:46 ` Alexey Shabalin @ 2011-08-26 13:29 ` Jurij Bogaevs'kyj 1 sibling, 0 replies; 14+ messages in thread From: Jurij Bogaevs'kyj @ 2011-08-26 13:29 UTC (permalink / raw) To: sysadmins 26.08.11 09:37, Yuriy Kashirin написав(ла): > On 26 августа 2011, Jurij Bogaevs'kyj wrote: >> 25.08.11 20:07, Alexey Shabalin написав(ла): >>> 25 августа 2011 г. 10:06 пользователь Jurij Bogaevs'kyj написал: >>>> 23.08.11 23:56, Dubrovskiy Viacheslav написав(ла): >>>>>> Сравнение конфигов помогло, в том плане, что теперь пуллер >>>>>> отрабатывает успешно, однако графиков по-преженему не видно... >>>>> >>>>> права проверьте на rrd и на генерируемые png. >>>> >>>> На rrd впоряде, файли генерируются и на чтение тоже с доступом >>>> все ок, а где генерируемые png искать не подскажете? >>> >>> Давайте не будем гадать, а посмотрим в логи. >> >> cat /var/log/cacti/cacti.log >> >> Aug 25 23:22:25 optymus suhosin[18240]: ALERT - function within >> blacklist called: popen() (attacker '95.81.63.211', file >> '/usr/share/cacti/lib/rrd.php', line 97) >> > > Сейчас у Вас popen присутствует в php.ini в параметре > suhosin.executor.func.blacklist > > Что у Вас скажет control apache2-mod_php5 ? > > Скорее всего после обновления стоило сказать > control apache2-mod_php5 public > ну или Семен Семеныч...(с) Таки оно, забыл совсем за это. Спасибо большое, проблема решена. > control apache2-mod_php5 relaxed > > -- Jurij Bogaevs'kiy aka samuray ICQ:248954815 Jabber:Jurij.Bogaevskyj_at_jabber.kiev.ua ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-08-26 13:29 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-08-22 7:08 [Sysadmins] cacti не рисует графики Jurij Bogaevs'kyj 2011-08-22 9:33 ` Dubrovskiy Viacheslav 2011-08-22 9:39 ` Sergey 2011-08-23 20:46 ` Jurij Bogaevs'kyj 2011-08-23 20:56 ` Dubrovskiy Viacheslav 2011-08-25 6:06 ` Jurij Bogaevs'kyj 2011-08-25 16:56 ` Sergey 2011-08-25 20:24 ` Jurij Bogaevs'kyj 2011-08-26 6:21 ` Sergey 2011-08-25 17:07 ` Alexey Shabalin 2011-08-25 21:04 ` Jurij Bogaevs'kyj 2011-08-26 6:37 ` Yuriy Kashirin 2011-08-26 11:46 ` Alexey Shabalin 2011-08-26 13:29 ` Jurij Bogaevs'kyj
ALT Linux sysadmins discussion This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sysadmins/0 sysadmins/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sysadmins sysadmins/ http://lore.altlinux.org/sysadmins \ sysadmins@lists.altlinux.org sysadmins@lists.altlinux.ru sysadmins@lists.altlinux.com public-inbox-index sysadmins Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sysadmins AGPL code for this site: git clone https://public-inbox.org/public-inbox.git