* Re: [sisyphus] Fwd: I. aarch64 @ 2018-06-29 15:37 ` Sergey Bolshakov 2018-06-29 18:22 ` Anton Farygin 2018-07-09 13:33 ` Sergey Bolshakov 0 siblings, 2 replies; 11+ messages in thread From: Sergey Bolshakov @ 2018-06-29 15:37 UTC (permalink / raw) To: sisyphus Привет. Продолжая новости о aarch64, хочу сообщить о доступности комбинированного образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных упражнений. Кроме очевидного lxqt, в образ включён firefox, всё остальное предлагается к установке из Sisyphus (synaptic). Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. Инджой. [1] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.raw.img.xz [2] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.tar.xz -- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-06-29 15:37 ` [sisyphus] Fwd: I. aarch64 Sergey Bolshakov @ 2018-06-29 18:22 ` Anton Farygin 2018-06-29 18:27 ` Sergey Bolshakov 2018-07-09 13:33 ` Sergey Bolshakov 1 sibling, 1 reply; 11+ messages in thread From: Anton Farygin @ 2018-06-29 18:22 UTC (permalink / raw) To: ALT Linux Sisyphus discussions, Sergey Bolshakov Быстрое зеркало: http://download.basealt.ru/pub/people/sbolshakov/ Серёг, а на Allwinner H5 не заведётся ? 29.06.2018 18:37, Sergey Bolshakov пишет: > Привет. > Продолжая новости о aarch64, хочу сообщить о доступности комбинированного > образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию > образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных > упражнений. > Кроме очевидного lxqt, в образ включён firefox, всё остальное > предлагается к установке из Sisyphus (synaptic). > Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. > Инджой. > > [1] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.raw.img.xz > [2] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.tar.xz > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-06-29 18:22 ` Anton Farygin @ 2018-06-29 18:27 ` Sergey Bolshakov 2018-06-29 18:50 ` Anton Farygin 0 siblings, 1 reply; 11+ messages in thread From: Sergey Bolshakov @ 2018-06-29 18:27 UTC (permalink / raw) To: sisyphus >>>>> "Anton" == Anton Farygin <rider-SLA8ab5CrdUvJsYlp49lxw@public.gmane.org> writes: > Быстрое зеркало: > http://download.basealt.ru/pub/people/sbolshakov/ > Серёг, а на Allwinner H5 не заведётся ? Нет. Но я уже выложил на стол pi pc2 :] > 29.06.2018 18:37, Sergey Bolshakov пишет: >> Привет. >> Продолжая новости о aarch64, хочу сообщить о доступности комбинированного >> образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию >> образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных >> упражнений. >> Кроме очевидного lxqt, в образ включён firefox, всё остальное >> предлагается к установке из Sisyphus (synaptic). >> Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. >> Инджой. >> >> [1] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.raw.img.xz >> [2] http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-rootfs-20180629.tar.xz >> > _______________________________________________ > Sisyphus mailing list > Sisyphus@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/sisyphus ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-06-29 18:27 ` Sergey Bolshakov @ 2018-06-29 18:50 ` Anton Farygin 0 siblings, 0 replies; 11+ messages in thread From: Anton Farygin @ 2018-06-29 18:50 UTC (permalink / raw) To: ALT Linux Sisyphus discussions, Sergey Bolshakov 29.06.2018 21:27, Sergey Bolshakov пишет: >>>>>> "Anton" == Anton Farygin<rider-SLA8ab5CrdUvJsYlp49lxw@public.gmane.org> writes: > > Быстрое зеркало: > >http://download.basealt.ru/pub/people/sbolshakov/ > > > Серёг, а на Allwinner H5 не заведётся ? > > Нет. Но я уже выложил на стол pi pc2 :] Ждём'с ;) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-06-29 15:37 ` [sisyphus] Fwd: I. aarch64 Sergey Bolshakov 2018-06-29 18:22 ` Anton Farygin @ 2018-07-09 13:33 ` Sergey Bolshakov 2018-07-10 5:51 ` Антон Мидюков 1 sibling, 1 reply; 11+ messages in thread From: Sergey Bolshakov @ 2018-07-09 13:33 UTC (permalink / raw) To: sisyphus >>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: > Привет. > Продолжая новости о aarch64, хочу сообщить о доступности комбинированного > образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию > образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных > упражнений. > Кроме очевидного lxqt, в образ включён firefox, всё остальное > предлагается к установке из Sisyphus (synaptic). > Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. > Инджой. Ещё один комбайн, на этот раз Raspberry Pi 3 и Orange Pi PC2: http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.raw.img.xz http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.rootfs.tar.xz В сравнении с предыдущим выпуском обновились ядро и Mesa, так что владельцы RPi3 (но не других платок!) могут удалить файл: /etc/X11/xorg.conf.d/99-modesetting-noglamor.conf и тем самым получить некоторое ускорение отрисовки в иксах. И чтоб два раза не вставать, почти то же самое (RPI3/Orange Pi PC) для armh: http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.raw.img.xz http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.rootfs.tar.xz Кстати говоря, эти образы вполне могут быть использованы и с другими устройствами на базе Allwinner -- достаточно найти загрузчик своей платы в пакетах u-boot-sunxi для armh или u-boot-sunxi64 для aarch64 и записать его на SD-карту одним или двумя вызовами dd, инструкции есть в соответствующих README.sunxi* этих двух пакетов. -- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-09 13:33 ` Sergey Bolshakov @ 2018-07-10 5:51 ` Антон Мидюков 2018-07-10 9:00 ` Sergey Bolshakov 0 siblings, 1 reply; 11+ messages in thread From: Антон Мидюков @ 2018-07-10 5:51 UTC (permalink / raw) To: sisyphus 09.07.2018 20:33, Sergey Bolshakov пишет: >>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: > > Привет. > > Продолжая новости о aarch64, хочу сообщить о доступности комбинированного > > образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию > > образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных > > упражнений. > > Кроме очевидного lxqt, в образ включён firefox, всё остальное > > предлагается к установке из Sisyphus (synaptic). > > Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. > > Инджой. > > Ещё один комбайн, на этот раз Raspberry Pi 3 и Orange Pi PC2: > > http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.raw.img.xz > http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.rootfs.tar.xz > > В сравнении с предыдущим выпуском обновились ядро и Mesa, так что > владельцы RPi3 (но не других платок!) могут удалить файл: > /etc/X11/xorg.conf.d/99-modesetting-noglamor.conf > и тем самым получить некоторое ускорение отрисовки в иксах. > > И чтоб два раза не вставать, почти то же самое (RPI3/Orange Pi PC) для armh: > > http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.raw.img.xz > http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.rootfs.tar.xz > > Кстати говоря, эти образы вполне могут быть использованы и с другими > устройствами на базе Allwinner -- достаточно найти загрузчик своей платы > в пакетах u-boot-sunxi для armh или u-boot-sunxi64 для aarch64 и > записать его на SD-карту одним или двумя вызовами dd, инструкции есть в > соответствующих README.sunxi* этих двух пакетов. > А Raspberry Pi 3 B+ поддерживается? У меня при загрузке ругается на отсутствие dtb-файла Raspberry Pi 3 B+ Затем пытается соединиться с локальным сервером, но безуспешно, что естественно, так как его в локальной сети нет. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-10 5:51 ` Антон Мидюков @ 2018-07-10 9:00 ` Sergey Bolshakov 2018-07-10 9:14 ` Sergey Bolshakov 0 siblings, 1 reply; 11+ messages in thread From: Sergey Bolshakov @ 2018-07-10 9:00 UTC (permalink / raw) To: sisyphus [-- Attachment #1: Type: text/plain, Size: 3114 bytes --] >>>>> "Антон" == Антон Мидюков <midyukov-anton-k+OT61UuxXo@public.gmane.org> writes: > 09.07.2018 20:33, Sergey Bolshakov пишет: >>>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: >> > Привет. >> > Продолжая новости о aarch64, хочу сообщить о доступности комбинированного >> > образа для Raspberry Pi 3 и Odroid C2, в виде готового к использованию >> > образа SD-карты [1] и отдельно tar-архива с rootfs [2] для самостоятельных >> > упражнений. >> > Кроме очевидного lxqt, в образ включён firefox, всё остальное >> > предлагается к установке из Sisyphus (synaptic). >> > Логин/пароль demo:demo, сеть с использованием dhcp -- всё как обычно. >> > Инджой. >> >> Ещё один комбайн, на этот раз Raspberry Pi 3 и Orange Pi PC2: >> >> http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.raw.img.xz >> http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-aarch64-20180709.rootfs.tar.xz >> >> В сравнении с предыдущим выпуском обновились ядро и Mesa, так что >> владельцы RPi3 (но не других платок!) могут удалить файл: >> /etc/X11/xorg.conf.d/99-modesetting-noglamor.conf >> и тем самым получить некоторое ускорение отрисовки в иксах. >> >> И чтоб два раза не вставать, почти то же самое (RPI3/Orange Pi PC) для armh: >> >> http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.raw.img.xz >> http://ftp.altlinux.org/pub/people/sbolshakov/unregular-lxqt-armh-20180709.rootfs.tar.xz >> >> Кстати говоря, эти образы вполне могут быть использованы и с другими >> устройствами на базе Allwinner -- достаточно найти загрузчик своей платы >> в пакетах u-boot-sunxi для armh или u-boot-sunxi64 для aarch64 и >> записать его на SD-карту одним или двумя вызовами dd, инструкции есть в >> соответствующих README.sunxi* этих двух пакетов. >> > А Raspberry Pi 3 B+ поддерживается? У меня при загрузке ругается на > отсутствие dtb-файла Raspberry Pi 3 B+ Затем пытается соединиться с > локальным сервером, но безуспешно, что естественно, так как его в > локальной сети нет. В следующий раз обязательно, а пока можно подложить в /lib/devicetree/*/ [-- Attachment #2: bcm2837-rpi-3-b-plus.dtb --] [-- Type: application/octet-stream, Size: 13437 bytes --] [-- Attachment #3: Type: text/plain, Size: 7 bytes --] -- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-10 9:00 ` Sergey Bolshakov @ 2018-07-10 9:14 ` Sergey Bolshakov 2018-07-10 10:58 ` Антон Мидюков 0 siblings, 1 reply; 11+ messages in thread From: Sergey Bolshakov @ 2018-07-10 9:14 UTC (permalink / raw) To: sisyphus [-- Attachment #1: Type: text/plain, Size: 909 bytes --] >>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: >>>>> "Антон" == Антон Мидюков <midyukov-anton-k+OT61UuxXo@public.gmane.org> writes: >> 09.07.2018 20:33, Sergey Bolshakov пишет: >>>>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: [skipped] >> А Raspberry Pi 3 B+ поддерживается? У меня при загрузке ругается на >> отсутствие dtb-файла Raspberry Pi 3 B+ Затем пытается соединиться с >> локальным сервером, но безуспешно, что естественно, так как его в >> локальной сети нет. > В следующий раз обязательно, а пока можно подложить в /lib/devicetree/*/ А лучше это: [-- Attachment #2: bcm2837-rpi-3-b-plus.dtb --] [-- Type: application/octet-stream, Size: 13437 bytes --] [-- Attachment #3: Type: text/plain, Size: 5 bytes --] -- ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-10 9:14 ` Sergey Bolshakov @ 2018-07-10 10:58 ` Антон Мидюков 2018-07-10 11:35 ` Aleksey Borisenkov 2018-07-10 11:37 ` Sergey Bolshakov 0 siblings, 2 replies; 11+ messages in thread From: Антон Мидюков @ 2018-07-10 10:58 UTC (permalink / raw) To: sisyphus 10.07.2018 16:14, Sergey Bolshakov пишет: >>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: >>>>>> "Антон" == Антон Мидюков <midyukov-anton-k+OT61UuxXo@public.gmane.org> writes: > >> 09.07.2018 20:33, Sergey Bolshakov пишет: > >>>>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: > [skipped] > >>> А Raspberry Pi 3 B+ поддерживается? У меня при загрузке ругается на > >> отсутствие dtb-файла Raspberry Pi 3 B+ Затем пытается соединиться с > >> локальным сервером, но безуспешно, что естественно, так как его в > >> локальной сети нет. > > > В следующий раз обязательно, а пока можно подложить в /lib/devicetree/*/ > > А лучше это: > Скопировал. Загрузилось. В SDDM наблюдаются просто дичайшие тормоза. Ушло минут пять, чтобы пароль ввести. Время реакции на любые события с клавиатуры и мыши (кроме передвижения курсора, с этим всё ок) более 20 секунд. В самом lxqt нормально. Что с этим можно поделать? Чего бы не хотелось видеть в сборке, по-умолчанию, так это pulseaudio, так как апплет громкости настроен из коробки на ALSA. В профиле желательно использовать цель +alsa, если всё-таки нужен pulseaudio, то +pulse. Из коробки хотелось бы иметь NetworkManager и alterator И можно на ваш профиль сборки посмотреть, чтобы самому попробовать собирать? -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-10 10:58 ` Антон Мидюков @ 2018-07-10 11:35 ` Aleksey Borisenkov 2018-07-10 11:37 ` Sergey Bolshakov 1 sibling, 0 replies; 11+ messages in thread From: Aleksey Borisenkov @ 2018-07-10 11:35 UTC (permalink / raw) To: sisyphus 10.07.2018 14:58, Антон Мидюков пишет: > Скопировал. Загрузилось. В SDDM наблюдаются просто дичайшие тормоза. > Ушло минут пять, чтобы пароль ввести. Время реакции на любые события с > клавиатуры и мыши (кроме передвижения курсора, с этим всё ок) более 20 > секунд. В самом lxqt нормально. Что с этим можно поделать? На нетбуке мне в подобном случае помогло добавить в /etc/security/pam_env.conf такую строку: QSG_DISTANCEFIELD_ANTIALIASING DEFAULT=subpixel-lowq ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [sisyphus] Fwd: I. aarch64 2018-07-10 10:58 ` Антон Мидюков 2018-07-10 11:35 ` Aleksey Borisenkov @ 2018-07-10 11:37 ` Sergey Bolshakov 1 sibling, 0 replies; 11+ messages in thread From: Sergey Bolshakov @ 2018-07-10 11:37 UTC (permalink / raw) To: sisyphus >>>>> "Антон" == Антон Мидюков <midyukov-anton-k+OT61UuxXo@public.gmane.org> writes: > 10.07.2018 16:14, Sergey Bolshakov пишет: >>>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: >>>>>>> "Антон" == Антон Мидюков <midyukov-anton-k+OT61UuxXo@public.gmane.org> writes: >> >> 09.07.2018 20:33, Sergey Bolshakov пишет: >> >>>>>>>> "Sergey" == Sergey Bolshakov <sbolshakov-u2l5PoMzF/Uox3rIn2DAYQ@public.gmane.org> writes: >> [skipped] >> >>>> А Raspberry Pi 3 B+ поддерживается? У меня при загрузке ругается на >> >> отсутствие dtb-файла Raspberry Pi 3 B+ Затем пытается соединиться с >> >> локальным сервером, но безуспешно, что естественно, так как его в >> >> локальной сети нет. >> >> > В следующий раз обязательно, а пока можно подложить в /lib/devicetree/*/ >> >> А лучше это: >> > Скопировал. Загрузилось. В SDDM наблюдаются просто дичайшие > тормоза. Ушло минут пять, чтобы пароль ввести. Время реакции на любые > события с клавиатуры и мыши (кроме передвижения курсора, с этим всё > ок) более 20 секунд. В самом lxqt нормально. Что с этим можно > поделать? Понятия не имею, я ненастоящий сварщик. Видимо нужно каким-то образом тюнить тему sddm. > Чего бы не хотелось видеть в сборке, по-умолчанию, так это pulseaudio, > так как апплет громкости настроен из коробки на ALSA. В профиле > желательно использовать цель +alsa, если всё-таки нужен pulseaudio, то > +pulse. > Из коробки хотелось бы иметь NetworkManager и alterator Моей целью является установление степени поддержки железа на тех платках, доступа к которым у меня нет, и только. > И можно на ваш профиль сборки посмотреть, чтобы самому попробовать собирать? Почему нет, особенно если там один коммит `initial' :] http://git.altlinux.org/people/sbolshakov/packages/arm-lxqt-profile.git -- ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2018-07-10 11:37 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-06-29 15:37 ` [sisyphus] Fwd: I. aarch64 Sergey Bolshakov 2018-06-29 18:22 ` Anton Farygin 2018-06-29 18:27 ` Sergey Bolshakov 2018-06-29 18:50 ` Anton Farygin 2018-07-09 13:33 ` Sergey Bolshakov 2018-07-10 5:51 ` Антон Мидюков 2018-07-10 9:00 ` Sergey Bolshakov 2018-07-10 9:14 ` Sergey Bolshakov 2018-07-10 10:58 ` Антон Мидюков 2018-07-10 11:35 ` Aleksey Borisenkov 2018-07-10 11:37 ` Sergey Bolshakov
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git