From: "Alexei V. Mezin" <alexei-mezin@rambler.ru>
To: sisyphus@lists.altlinux.org
Subject: Re: [sisyphus] Напомните про монтирование флэшек
Date: Wed, 08 Dec 2010 23:25:04 +0300
Message-ID: <idopj0$l56$1@dough.gmane.org> (raw)
In-Reply-To: <20101208115827.4feab8a6@eeepc-mak.localdomain>
08.12.2010 11:58, Michael A. Kangin пишет:
> Странно. последняя пара версий должна бы работать с ntfs-3g.
> Можно посмотреть выхлоп из /var/log/messages и вывод hal-device?
>
Может у меня что-то сломано? Например, системная локаль ср1251.
Dec 8 23:21:23 threebears kernel: usb 1-6.2: new high speed USB device
using ehci_hcd and address 31
Dec 8 23:21:23 threebears kernel: usb 1-6.2: New USB device found,
idVendor=8564, idProduct=1000
Dec 8 23:21:23 threebears kernel: usb 1-6.2: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Dec 8 23:21:23 threebears kernel: usb 1-6.2: Product: Mass Storage Device
Dec 8 23:21:23 threebears kernel: usb 1-6.2: Manufacturer: JetFlash
Dec 8 23:21:23 threebears kernel: usb 1-6.2: SerialNumber: EYODEL3J
Dec 8 23:21:23 threebears kernel: usb 1-6.2: configuration #1 chosen
from 1 choice
Dec 8 23:21:23 threebears kernel: scsi10 : SCSI emulation for USB Mass
Storage devices
Dec 8 23:21:28 threebears kernel: scsi 10:0:0:0: Direct-Access
JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: Attached scsi generic
sg9 type 0
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] 31391744 512-byte
logical blocks: (16.0 GB/14.9 GiB)
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Write Protect is off
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive
cache: write through
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive
cache: write through
Dec 8 23:21:28 threebears kernel: sdi: sdi1
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive
cache: write through
Dec 8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Attached SCSI
removable disk
0: udi = '/org/freedesktop/Hal/devices/volume_uuid_6084FD0284FCDB8A'
info.category = 'volume' (string)
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list)
linux.hotplug_type = 3 (0x3) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
(string)
info.capabilities = { 'volume', 'block' } (string list)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '' (string)
volume.uuid = '6084FD0284FCDB8A' (string)
volume.label = 'Transcend' (string)
volume.mount_point = '' (string)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.linux.is_device_mapper = false (bool)
volume.is_disc = false (bool)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_6084FD0284FCDB8A' (string)
volume.is_partition = true (bool)
volume.partition.number = 1 (0x1) (int)
volume.num_blocks = 31391488 (0x1deff00) (uint64)
volume.size = 16072441856 (0x3bdfe0000) (uint64)
info.product = 'Transcend' (string)
block.device = '/dev/sdi1' (string)
block.minor = 129 (0x81) (int)
volume.block_size = 512 (0x200) (int)
block.is_volume = true (bool)
volume.policy.should_mount = false (bool)
volume.partition.start = 131072 (0x20000) (uint64)
block.major = 8 (0x8) (int)
volume.partition.media_size = 16072572928 (0x3be000000) (uint64)
volume.ignore = true (bool)
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount',
'Unmount', 'Eject' } (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as',
'as' } (string list)
org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point
fstype extra_options', 'extra_options', 'extra_options' } (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {
'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
(string list)
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime',
'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=',
'gid=', 'u
mask=', 'utf8' } (string list)
volume.unmount.valid_options = { 'lazy' } (string list)
volume.policy.mount_filesystem = 'ntfs' (string)
volume.policy.corwin = true (bool)
volume.policy.desired_mount_point = 'Transcend 16GB' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.2/1-6.2:1.0/host10/target10:0:0/10:0:0:0/block/sdi/sdi1'
(string)
info.parent =
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
(string)
1: udi =
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
info.category = 'storage' (string)
info.vendor = 'JetFlash' (string)
info.interfaces = { 'org.freedesktop.Hal.Device.Storage.Removable' }
(string list)
linux.hotplug_type = 3 (0x3) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
(string)
storage.policy.should_mount = true (bool)
storage.policy.mount_options = 'nodev,nosuid,noexec,noatime' (string)
info.capabilities = { 'storage', 'block' } (string list)
info.addons = { 'hald-addon-storage' } (string list)
info.product = 'Transcend 16GB' (string)
info.udi =
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
(string)
block.device = '/dev/sdi' (string)
block.major = 8 (0x8) (int)
block.minor = 128 (0x80) (int)
block.is_volume = false (bool)
storage.bus = 'usb' (string)
storage.no_partitions_hint = false (bool)
storage.media_check_enabled = true (bool)
storage.automount_enabled_hint = true (bool)
storage.drive_type = 'disk' (string)
storage.model = 'Transcend 16GB' (string)
storage.vendor = 'JetFlash' (string)
storage.serial = 'JetFlash_Transcend_16GB_EYODEL3J-0:0' (string)
storage.firmware_version = '8.07' (string)
storage.lun = 0 (0x0) (int)
storage.originating_device =
'/org/freedesktop/Hal/devices/usb_device_8564_1000_EYODEL3J_if0' (string)
storage.removable.media_available = true (bool)
storage.removable = true (bool)
storage.size = 0 (0x0) (uint64)
storage.removable.support_async_notification = false (bool)
storage.hotpluggable = true (bool)
storage.requires_eject = false (bool)
storage.partitioning_scheme = 'mbr' (string)
storage.removable.media_size = 16072572928 (0x3be000000) (uint64)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.2/1-6.2:1.0/host10/target10:0:0/10:0:0:0/block/sdi'
(string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_8564_1000_EYODEL3J_if0_scsi_host_0_scsi_device_lun0'
(string)
next prev parent reply other threads:[~2010-12-08 20:25 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-06 21:24 Alexei V. Mezin
2010-12-07 3:56 ` Ildar Mulyukov
2010-12-08 21:21 ` Alexei V. Mezin
2010-12-07 9:13 ` Mykola S. Grechukh
2010-12-07 21:57 ` Alexei V. Mezin
2010-12-08 4:56 ` Ivan A. Melnikov
2010-12-08 5:31 ` Rinat Bikov
2010-12-08 8:31 ` Alexei V. Mezin
2010-12-08 9:37 ` Mykola S. Grechukh
2010-12-08 9:54 ` REAL
2010-12-08 20:37 ` Alexei V. Mezin
2010-12-08 0:17 ` Michael A. Kangin
2010-12-08 8:25 ` Alexei V. Mezin
2010-12-08 8:44 ` Sergei Epiphanov
2010-12-08 8:58 ` Michael A. Kangin
2010-12-08 20:25 ` Alexei V. Mezin [this message]
2010-12-08 22:11 ` Ivan Fedorov
2010-12-08 22:22 ` Alexei V. Mezin
2010-12-09 7:04 ` REAL
2010-12-09 7:36 ` Денис Старченко
2010-12-09 7:53 ` REAL
2010-12-09 8:06 ` Денис Старченко
2010-12-09 7:59 ` Dmitriy Kruglikov
2010-12-09 9:47 ` Sergei Epiphanov
2010-12-09 9:51 ` Mykola S. Grechukh
2010-12-09 10:12 ` REAL
2010-12-09 10:05 ` Mykola S. Grechukh
2010-12-09 10:20 ` REAL
2010-12-09 10:12 ` [sisyphus] [JT] " Ivan A. Melnikov
2010-12-09 10:28 ` REAL
2010-12-09 8:34 ` [sisyphus] " Rinat Bikov
2010-12-09 10:12 ` Michael A. Kangin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='idopj0$l56$1@dough.gmane.org' \
--to=alexei-mezin@rambler.ru \
--cc=sisyphus@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git