Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-std-def-alt7 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt7) (GCC) ) #1 SMP Wed Dec 17 09:44:47 UTC 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable) BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data) BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS) BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x37fc0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 37fc0000 @ 10000-16000 RAMDISK: 00e41000 - 00eff6f0 ACPI: RSDP 000F9480, 0014 (r0 ACPIAM) ACPI: RSDT 37FC0000, 0040 (r1 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: FACP 37FC0200, 0084 (r2 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: DSDT 37FC05B0, 4651 (r1 MSI 1222 B18 INTL 20051117) ACPI: FACS 37FCE000, 0040 ACPI: APIC 37FC0390, 005C (r1 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: MCFG 37FC03F0, 003C (r1 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: SLIC 37FC0430, 0176 (r1 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: OEMB 37FCE040, 0071 (r1 MSI_NB MEGABOOK 12000707 MSFT 97) ACPI: HPET 37FC4C10, 0038 (r1 MSI_NB OEMHPET 12000707 MSFT 97) ACPI: SSDT 37FC4C50, 022E (r1 A M I POWERNOW 1 AMD 1) 0MB HIGHMEM available. 895MB LOWMEM available. mapped low ram: 0 - 37fc0000 low ram: 00000000 - 37fc0000 bootmap 00012000 - 00018ff8 (9 early reservations) ==> bootmem [0000000000 - 0037fc0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 00006b32c0] TEXT DATA BSS ==> [0000200000 - 00006b32c0] #4 [0000e41000 - 0000eff6f0] RAMDISK ==> [0000e41000 - 0000eff6f0] #5 [00006b4000 - 00006b7000] INIT_PG_TABLE ==> [00006b4000 - 00006b7000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] found SMP MP-table at [c00ff780] 000ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00037fc0 HighMem 0x00037fc0 -> 0x00037fc0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00037fc0 On node 0 totalpages: 229199 free_area_init_node: node 0, pgdat c0580100, node_mem_map c1000240 DMA zone: 3947 pages, LIFO batch:0 Normal zone: 223236 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8300 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 38000000:c8000000) PERCPU: Allocating 38428 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227183 Kernel command line: auto BOOT_IMAGE=2627-std-def-7 ro root=804 resume=/dev/sda3 panic=30 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 1700.054 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 902084k/917248k available (2478k kernel code, 14572k reserved, 1192k data, 404k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf7fc0000 ( 895 MB) .init : 0xc059d000 - 0xc0602000 ( 404 kB) .data : 0xc046bac0 - 0xc0595d40 (1192 kB) .text : 0xc0200000 - 0xc046bac0 (2478 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.10 BogoMIPS (lpj=6800216) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0(2) -> Core 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3400.17 BogoMIPS (lpj=6800347) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1(2) -> Core 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 Brought up 2 CPUs Total of 2 processors activated (6800.28 BogoMIPS). CPU0 attaching sched-domain: System has AMD C1E enabled domain 0: <6>Switch to broadcast mode on CPU1 span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 Switch to broadcast mode on CPU0 net_namespace: 840 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 ACPI Error (evregion-0315): No handler for Region [EC__] (f783a9fc) [EmbeddedControl] [20080609] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST ACPI Error (evregion-0315): No handler for Region [EC__] (f783a9fc) [EmbeddedControl] [20080609] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: missing confirmations, switch off interrupt mode. ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled PCI: 0000:00:12.0 reg 10 io port: [b000, b007] PCI: 0000:00:12.0 reg 14 io port: [a000, a003] PCI: 0000:00:12.0 reg 18 io port: [9000, 9007] PCI: 0000:00:12.0 reg 1c io port: [8000, 8003] PCI: 0000:00:12.0 reg 20 io port: [7000, 700f] PCI: 0000:00:12.0 reg 24 32bit mmio: [fdcff800, fdcffbff] pci 0000:00:12.0: set SATA to AHCI mode PCI: 0000:00:13.0 reg 10 32bit mmio: [fdcfe000, fdcfefff] PCI: 0000:00:13.1 reg 10 32bit mmio: [fdcfd000, fdcfdfff] PCI: 0000:00:13.2 reg 10 32bit mmio: [fdcfc000, fdcfcfff] PCI: 0000:00:13.3 reg 10 32bit mmio: [fdcfb000, fdcfbfff] PCI: 0000:00:13.4 reg 10 32bit mmio: [fdcfa000, fdcfafff] PCI: 0000:00:13.5 reg 10 32bit mmio: [fdcff000, fdcff0ff] pci 0000:00:13.5: supports D1 pci 0000:00:13.5: supports D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled PCI: 0000:00:14.0 reg 10 io port: [b00, b0f] PCI: 0000:00:14.1 reg 10 io port: [0, 7] PCI: 0000:00:14.1 reg 14 io port: [0, 3] PCI: 0000:00:14.1 reg 18 io port: [0, 7] PCI: 0000:00:14.1 reg 1c io port: [0, 3] PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f] PCI: 0000:00:14.2 reg 10 64bit mmio: [fdcf4000, fdcf7fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled PCI: 0000:01:05.0 reg 10 64bit mmio: [d0000000, dfffffff] PCI: 0000:01:05.0 reg 18 64bit mmio: [fdef0000, fdefffff] PCI: 0000:01:05.0 reg 20 io port: [c000, c0ff] PCI: 0000:01:05.0 reg 24 32bit mmio: [fdd00000, fddfffff] pci 0000:01:05.0: supports D1 pci 0000:01:05.0: supports D2 PCI: 0000:01:05.2 reg 10 64bit mmio: [fdee8000, fdeebfff] PCI: bridge 0000:00:01.0 io port: [c000, cfff] PCI: bridge 0000:00:01.0 32bit mmio: [fdd00000, fdefffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] PCI: 0000:02:00.0 reg 10 64bit mmio: [fdff0000, fdffffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:04.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:04.0 32bit mmio: [fdf00000, fdffffff] PCI: bridge 0000:00:06.0 io port: [d000, dfff] PCI: bridge 0000:00:06.0 32bit mmio: [fe000000, fe9fffff] PCI: bridge 0000:00:06.0 64bit mmio pref: [fa000000, fcffffff] PCI: 0000:05:00.0 reg 10 io port: [e800, e8ff] PCI: 0000:05:00.0 reg 18 64bit mmio: [feaff000, feafffff] PCI: 0000:05:00.0 reg 30 32bit mmio: [feac0000, feadffff] pci 0000:05:00.0: supports D1 pci 0000:05:00.0: supports D2 pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:07.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:07.0 io port: [e000, efff] PCI: bridge 0000:00:07.0 32bit mmio: [fea00000, feafffff] PCI: 0000:06:04.0 reg 10 32bit mmio: [febffc00, febffc7f] pci 0000:06:04.0: supports D1 pci 0000:06:04.0: supports D2 pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.0: PME# disabled PCI: 0000:06:04.1 reg 10 32bit mmio: [febff800, febff8ff] pci 0000:06:04.1: supports D1 pci 0000:06:04.1: supports D2 pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.1: PME# disabled PCI: 0000:06:04.2 reg 10 32bit mmio: [febff400, febff47f] pci 0000:06:04.2: supports D1 pci 0000:06:04.2: supports D2 pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.2: PME# disabled PCI: 0000:06:04.3 reg 10 32bit mmio: [febff000, febff0ff] pci 0000:06:04.3: supports D1 pci 0000:06:04.3: supports D2 pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.3: PME# disabled pci 0000:00:14.4: transparent bridge PCI: bridge 0000:00:14.4 32bit mmio: [feb00000, febfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0x38000000-0x3fffffff has been reserved system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x40b-0x40b has been reserved system 00:0a: ioport range 0x4d6-0x4d6 has been reserved system 00:0a: ioport range 0xc00-0xc01 has been reserved system 00:0a: ioport range 0xc14-0xc14 has been reserved system 00:0a: ioport range 0xc50-0xc51 has been reserved system 00:0a: ioport range 0xc52-0xc52 has been reserved system 00:0a: ioport range 0xc6c-0xc6c has been reserved system 00:0a: ioport range 0xc6f-0xc6f has been reserved system 00:0a: ioport range 0xcd0-0xcd1 has been reserved system 00:0a: ioport range 0xcd2-0xcd3 has been reserved system 00:0a: ioport range 0xcd4-0xcd5 has been reserved system 00:0a: ioport range 0xcd6-0xcd7 has been reserved system 00:0a: ioport range 0xcd8-0xcdf has been reserved system 00:0a: ioport range 0x800-0x89f has been reserved system 00:0a: ioport range 0xb10-0xb1f has been reserved system 00:0a: ioport range 0x900-0x90f has been reserved system 00:0a: ioport range 0x910-0x91f has been reserved system 00:0a: ioport range 0xfe00-0xfefe has been reserved system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0x37ffffff could not be reserved system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfdd00000-0xfdefffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 pci 0000:00:06.0: IO window: 0xd000-0xdfff pci 0000:00:06.0: MEM window: 0xfe000000-0xfe9fffff pci 0000:00:06.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 pci 0000:00:07.0: IO window: 0xe000-0xefff pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:06 pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [c000, cfff] bus: 01 index 1 mmio: [fdd00000, fdefffff] bus: 01 index 2 mmio: [d0000000, dfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [fdf00000, fdffffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [d000, dfff] bus: 03 index 1 mmio: [fe000000, fe9fffff] bus: 03 index 2 mmio: [fa000000, fcffffff] bus: 03 index 3 mmio: [0, 0] bus: 05 index 0 io port: [e000, efff] bus: 05 index 1 mmio: [fea00000, feafffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [feb00000, febfffff] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 io port: [0, ffff] bus: 06 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 761k freed audit: initializing netlink socket (disabled) type=2000 audit(1229965057.848:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1763 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pci_express 0000:00:04.0:pcie03: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pci_express 0000:00:06.0:pcie02: allocate port service pci_express 0000:00:06.0:pcie03: allocate port service pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: found MSI capability pci_express 0000:00:07.0:pcie00: allocate port service pci_express 0000:00:07.0:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:9f74 vesafb: pmi: set display start = c00c9ffe, set palette = c00ca0bc vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 133202 bytes bootsplash: ...found (800x600, 12886 bytes, v3). Console: switching to colour frame buffer device 97x34 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 404k freed Write protecting the kernel text: 2480k Write protecting the kernel read-only data: 996k Executing init=/init input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-T20N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22 ata2: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa80 irq 22 ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/PNP0C09:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button (CM) [PWRB] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sd 0:0:0:0: Attached scsi generic sg0 type 0 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 r8169 0000:05:00.0: setting latency timer to 64 eth0: RTL8168b/8111b at 0xf887e000, 00:19:db:ec:38:47, XID 38000000 IRQ 220 ACPI: AC Adapter [ADP1] (on-line) ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425) hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 input: PC Speaker as /devices/platform/pcspkr/input/input5 acpi device:06: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6 ACPI: duty_cycle spans bit 4 ACPI: processor limited to max C-state 1 processor ACPI0007:00: registered as cooling_device1 processor ACPI0007:01: registered as cooling_device2 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfdcff000 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: Battery Slot [BAT1] (battery present) usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd usb usb1: SerialNumber: 0000:00:13.5 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Error: Driver 'pcspkr' is already registered, aborting... usb 1-3: new high speed USB device using ehci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfdcfe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-3: configuration #1 chosen from 1 choice usb 1-3: New USB device found, idVendor=0c45, idProduct=62c0 usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-3: Product: USB 2.0 Camera usb 1-3: Manufacturer: Sonix Technology Co., Ltd. usb 1-3: SerialNumber: SN0001 wlan: trunk usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfdcfd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ath_pci: trunk Linux agpgart interface v0.103 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfdcfc000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new full speed USB device using ohci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfdcfb000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=147e, idProduct=2016 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Fingerprint Sensor usb 3-2: Manufacturer: TouchStrip usb 4-2: new low speed USB device using ohci_hcd and address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd usb usb5: SerialNumber: 0000:00:13.3 ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfdcfa000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 4-2: configuration #1 chosen from 1 choice usb 4-2: New USB device found, idVendor=0f62, idProduct=1001 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB & PS/2 Mouse usb 4-2: Manufacturer: Acrox usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd usb usb6: SerialNumber: 0000:00:13.4 ath_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath_pci 0000:02:00.0: setting latency timer to 64 usb 5-1: new low speed USB device using ohci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 5-1: New USB device found, idVendor=04d9, idProduct=1603 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB Keyboard usb 5-1: Manufacturer: MadWifi: ath_attach: Switching rfkill capability off ath_rate_sample: 1.2 (trunk) MadWifi: ath_attach: Switching per-packet transmit power control off wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic wifi0: ath_announce: Use hw queue 8 for CAB traffic wifi0: ath_announce: Use hw queue 9 for beacons ath_pci: wifi0: Atheros 5424/2424: mem=0xfdff0000, irq=16 sdhci-pci 0000:06:04.1: SDHCI controller found [1524:0750] (rev 0) sdhci-pci 0000:06:04.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 mmc0: SDHCI controller on PCI [0000:06:04.1] using PIO sdhci-pci 0000:06:04.3: SDHCI controller found [1524:0751] (rev 0) sdhci-pci 0000:06:04.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 mmc1: SDHCI controller on PCI [0000:06:04.3] using PIO Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usbcore: registered new interface driver hiddev input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input9 input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.2-2 input: USB Keyboard as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input10 input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.3-1 input: USB Keyboard as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.1/input/input11 input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.3-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k EXT3 FS on sda4, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a device eth0 entered promiscuous mode device eth0 left promiscuous mode QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard KQEMU installed, max_locked_mem=451696kB. bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 133202 bytes bootsplash: ...found (800x600, 12886 bytes, v3). bootsplash: status on console 1 changed to on Clocksource tsc unstable (delta = -263991016 ns) pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.29.0 20080528 on minor 0 mtrr: base(0xd0000000) is not aligned on a size(0xa000000) boundary [drm] Setting GART location based on new memory map [drm] Loading RS690 Microcode [drm] Num pipes: 1 [drm] writeback test failed hda-intel: Invalid position buffer, using LPIB read method instead. Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.