* Re: [sisyphus] kernel-image-std-def-2.6.27-alt7 & battery
2008-12-22 9:44 ` Денис Ягофаров
@ 2008-12-22 15:09 ` Di
0 siblings, 0 replies; 4+ messages in thread
From: Di @ 2008-12-22 15:09 UTC (permalink / raw)
To: ALT Linux Sisyphus discussions
[-- Attachment #1: Type: text/plain, Size: 35354 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-std-def-alt7 (builder@apiary.egro.altlinux.org)
(gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt7) (GCC) ) #1 SMP Wed
Dec 17 09:44:47 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable)
BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data)
BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS)
BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x37fc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 37fc0000 @ 10000-16000
RAMDISK: 00e41000 - 00eff6f0
ACPI: RSDP 000F9480, 0014 (r0 ACPIAM)
ACPI: RSDT 37FC0000, 0040 (r1 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: FACP 37FC0200, 0084 (r2 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: DSDT 37FC05B0, 4651 (r1 MSI 1222 B18 INTL 20051117)
ACPI: FACS 37FCE000, 0040
ACPI: APIC 37FC0390, 005C (r1 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: MCFG 37FC03F0, 003C (r1 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: SLIC 37FC0430, 0176 (r1 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: OEMB 37FCE040, 0071 (r1 MSI_NB MEGABOOK 12000707 MSFT 97)
ACPI: HPET 37FC4C10, 0038 (r1 MSI_NB OEMHPET 12000707 MSFT 97)
ACPI: SSDT 37FC4C50, 022E (r1 A M I POWERNOW 1 AMD 1)
0MB HIGHMEM available.
895MB LOWMEM available.
mapped low ram: 0 - 37fc0000
low ram: 00000000 - 37fc0000
bootmap 00012000 - 00018ff8
(9 early reservations) ==> bootmem [0000000000 - 0037fc0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000200000 - 00006b32c0] TEXT DATA BSS ==> [0000200000 -
00006b32c0]
#4 [0000e41000 - 0000eff6f0] RAMDISK ==> [0000e41000 -
0000eff6f0]
#5 [00006b4000 - 00006b7000] INIT_PG_TABLE ==> [00006b4000 -
00006b7000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 -
0000012000]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 -
0000019000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037fc0
HighMem 0x00037fc0 -> 0x00037fc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00037fc0
On node 0 totalpages: 229199
free_area_init_node: node 0, pgdat c0580100, node_mem_map c1000240
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 223236 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 38000000:c8000000)
PERCPU: Allocating 38428 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227183
Kernel command line: auto BOOT_IMAGE=2627-std-def-7 ro root=804
resume=/dev/sda3 panic=30
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 1700.054 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902084k/917248k available (2478k kernel code, 14572k reserved,
1192k data, 404k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7fc0000 ( 895 MB)
.init : 0xc059d000 - 0xc0602000 ( 404 kB)
.data : 0xc046bac0 - 0xc0595d40 (1192 kB)
.text : 0xc0200000 - 0xc046bac0 (2478 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3400.10 BogoMIPS (lpj=6800216)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3400.17 BogoMIPS
(lpj=6800347)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
Brought up 2 CPUs
Total of 2 processors activated (6800.28 BogoMIPS).
CPU0 attaching sched-domain:
System has AMD C1E enabled
domain 0: <6>Switch to broadcast mode on CPU1
span 0-1 level CPU
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 1 0
Switch to broadcast mode on CPU0
net_namespace: 840 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
ACPI Error (evregion-0315): No handler for Region [EC__] (f783a9fc)
[EmbeddedControl] [20080609]
ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler
[20080609]
ACPI Error (psparse-0530): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST
ACPI Error (uteval-0232): Method execution failed
[\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST
ACPI Error (evregion-0315): No handler for Region [EC__] (f783a9fc)
[EmbeddedControl] [20080609]
ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler
[20080609]
ACPI Error (psparse-0530): Method parse/execution failed
[\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST
ACPI Error (uteval-0232): Method execution failed
[\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node f783b360), AE_NOT_EXIST
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:12.0 reg 10 io port: [b000, b007]
PCI: 0000:00:12.0 reg 14 io port: [a000, a003]
PCI: 0000:00:12.0 reg 18 io port: [9000, 9007]
PCI: 0000:00:12.0 reg 1c io port: [8000, 8003]
PCI: 0000:00:12.0 reg 20 io port: [7000, 700f]
PCI: 0000:00:12.0 reg 24 32bit mmio: [fdcff800, fdcffbff]
pci 0000:00:12.0: set SATA to AHCI mode
PCI: 0000:00:13.0 reg 10 32bit mmio: [fdcfe000, fdcfefff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [fdcfd000, fdcfdfff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [fdcfc000, fdcfcfff]
PCI: 0000:00:13.3 reg 10 32bit mmio: [fdcfb000, fdcfbfff]
PCI: 0000:00:13.4 reg 10 32bit mmio: [fdcfa000, fdcfafff]
PCI: 0000:00:13.5 reg 10 32bit mmio: [fdcff000, fdcff0ff]
pci 0000:00:13.5: supports D1
pci 0000:00:13.5: supports D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [b00, b0f]
PCI: 0000:00:14.1 reg 10 io port: [0, 7]
PCI: 0000:00:14.1 reg 14 io port: [0, 3]
PCI: 0000:00:14.1 reg 18 io port: [0, 7]
PCI: 0000:00:14.1 reg 1c io port: [0, 3]
PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
PCI: 0000:00:14.2 reg 10 64bit mmio: [fdcf4000, fdcf7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 64bit mmio: [d0000000, dfffffff]
PCI: 0000:01:05.0 reg 18 64bit mmio: [fdef0000, fdefffff]
PCI: 0000:01:05.0 reg 20 io port: [c000, c0ff]
PCI: 0000:01:05.0 reg 24 32bit mmio: [fdd00000, fddfffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: 0000:01:05.2 reg 10 64bit mmio: [fdee8000, fdeebfff]
PCI: bridge 0000:00:01.0 io port: [c000, cfff]
PCI: bridge 0000:00:01.0 32bit mmio: [fdd00000, fdefffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [fdff0000, fdffffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:04.0. It can be
enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:04.0 32bit mmio: [fdf00000, fdffffff]
PCI: bridge 0000:00:06.0 io port: [d000, dfff]
PCI: bridge 0000:00:06.0 32bit mmio: [fe000000, fe9fffff]
PCI: bridge 0000:00:06.0 64bit mmio pref: [fa000000, fcffffff]
PCI: 0000:05:00.0 reg 10 io port: [e800, e8ff]
PCI: 0000:05:00.0 reg 18 64bit mmio: [feaff000, feafffff]
PCI: 0000:05:00.0 reg 30 32bit mmio: [feac0000, feadffff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:07.0. It can be
enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:07.0 io port: [e000, efff]
PCI: bridge 0000:00:07.0 32bit mmio: [fea00000, feafffff]
PCI: 0000:06:04.0 reg 10 32bit mmio: [febffc00, febffc7f]
pci 0000:06:04.0: supports D1
pci 0000:06:04.0: supports D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.0: PME# disabled
PCI: 0000:06:04.1 reg 10 32bit mmio: [febff800, febff8ff]
pci 0000:06:04.1: supports D1
pci 0000:06:04.1: supports D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.1: PME# disabled
PCI: 0000:06:04.2 reg 10 32bit mmio: [febff400, febff47f]
pci 0000:06:04.2: supports D1
pci 0000:06:04.2: supports D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: PME# disabled
PCI: 0000:06:04.3 reg 10 32bit mmio: [febff000, febff0ff]
pci 0000:06:04.3: supports D1
pci 0000:06:04.3: supports D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 32bit mmio: [feb00000, febfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0x38000000-0x3fffffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc14-0xc14 has been reserved
system 00:0a: ioport range 0xc50-0xc51 has been reserved
system 00:0a: ioport range 0xc52-0xc52 has been reserved
system 00:0a: ioport range 0xc6c-0xc6c has been reserved
system 00:0a: ioport range 0xc6f-0xc6f has been reserved
system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
system 00:0a: ioport range 0xcd8-0xcdf has been reserved
system 00:0a: ioport range 0x800-0x89f has been reserved
system 00:0a: ioport range 0xb10-0xb1f has been reserved
system 00:0a: ioport range 0x900-0x90f has been reserved
system 00:0a: ioport range 0x910-0x91f has been reserved
system 00:0a: ioport range 0xfe00-0xfefe has been reserved
system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x37ffffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfdd00000-0xfdefffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xd000-0xdfff
pci 0000:00:06.0: MEM window: 0xfe000000-0xfe9fffff
pci 0000:00:06.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:05
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
pci 0000:00:14.4: IO window: disabled
pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [c000, cfff]
bus: 01 index 1 mmio: [fdd00000, fdefffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [fdf00000, fdffffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [d000, dfff]
bus: 03 index 1 mmio: [fe000000, fe9fffff]
bus: 03 index 2 mmio: [fa000000, fcffffff]
bus: 03 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [e000, efff]
bus: 05 index 1 mmio: [fea00000, feafffff]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [feb00000, febfffff]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 io port: [0, ffff]
bus: 06 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 761k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1229965057.848:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1763
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie02: allocate port service
pci_express 0000:00:06.0:pcie03: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k,
total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:9f74
vesafb: pmi: set display start = c00c9ffe, set palette = c00ca0bc
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 133202 bytes
bootsplash: ...found (800x600, 12886 bytes, v3).
Console: switching to colour frame buffer device 97x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel text: 2480k
Write protecting the kernel read-only data: 996k
Executing init=/init
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-T20N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
irq 22
ata2: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa80 irq 22
ata1: softreset failed (device not ready)
ata1: failed due to HW bug, retry pmp=0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/PNP0C09:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:0:0:0: Attached scsi generic sg0 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:05:00.0: setting latency timer to 64
eth0: RTL8168b/8111b at 0xf887e000, 00:19:db:ec:38:47, XID 38000000 IRQ 220
ACPI: AC Adapter [ADP1] (on-line)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212, AR5416, RF5111,
RF5112, RF2413, RF5413, RF2133, RF2425)
hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
input: PC Speaker as /devices/platform/pcspkr/input/input5
acpi device:06: registered as cooling_device0
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6
ACPI: duty_cycle spans bit 4
ACPI: processor limited to max C-state 1
processor ACPI0007:00: registered as cooling_device1
processor ACPI0007:01: registered as cooling_device2
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfdcff000
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: Battery Slot [BAT1] (battery present)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-std-def-alt7 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Error: Driver 'pcspkr' is already registered, aborting...
usb 1-3: new high speed USB device using ehci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfdcfe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=0c45, idProduct=62c0
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-3: Product: USB 2.0 Camera
usb 1-3: Manufacturer: Sonix Technology Co., Ltd.
usb 1-3: SerialNumber: SN0001
wlan: trunk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfdcfd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ath_pci: trunk
Linux agpgart interface v0.103
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfdcfc000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using ohci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfdcfb000
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=147e, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Fingerprint Sensor
usb 3-2: Manufacturer: TouchStrip
usb 4-2: new low speed USB device using ohci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfdcfa000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: New USB device found, idVendor=0f62, idProduct=1001
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB & PS/2 Mouse
usb 4-2: Manufacturer: Acrox
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-std-def-alt7 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
ath_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath_pci 0000:02:00.0: setting latency timer to 64
usb 5-1: new low speed USB device using ohci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=04d9, idProduct=1603
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer:
MadWifi: ath_attach: Switching rfkill capability off
ath_rate_sample: 1.2 (trunk)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 5424/2424: mem=0xfdff0000, irq=16
sdhci-pci 0000:06:04.1: SDHCI controller found [1524:0750] (rev 0)
sdhci-pci 0000:06:04.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI controller on PCI [0000:06:04.1] using PIO
sdhci-pci 0000:06:04.3: SDHCI controller found [1524:0751] (rev 0)
sdhci-pci 0000:06:04.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
mmc1: SDHCI controller on PCI [0000:06:04.3] using PIO
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
input: USB 2.0 Camera as
/devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usbcore: registered new interface driver hiddev
input: Acrox USB & PS/2 Mouse as
/devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input9
input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on
usb-0000:00:13.2-2
input: USB Keyboard as
/devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input10
input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.3-1
input: USB Keyboard as
/devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.1/input/input11
input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.3-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
EXT3 FS on sda4, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
r8169: eth0: link up
r8169: eth0: link up
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53
processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice
Bellard
KQEMU installed, max_locked_mem=451696kB.
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 133202 bytes
bootsplash: ...found (800x600, 12886 bytes, v3).
bootsplash: status on console 1 changed to on
Clocksource tsc unstable (delta = -263991016 ns)
pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
mtrr: base(0xd0000000) is not aligned on a size(0xa000000) boundary
[drm] Setting GART location based on new memory map
[drm] Loading RS690 Microcode
[drm] Num pipes: 1
[drm] writeback test failed
hda-intel: Invalid position buffer, using LPIB read method instead.
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[-- Attachment #2: denyago.vcf --]
[-- Type: text/x-vcard, Size: 366 bytes --]
begin:vcard
fn:Denis Timurovich Yagofarov
n:Yagofarov;Denis Timurovich
org:ITGIS NASU
adr:room 615;;Chokolovski blvdr., 13;Kiev;;03151;Ukraine
email;internet:denyago@rambler.ru
title:system administrator
tel;work:80442480755
tel;pager:diyago@jabber.te.ua
tel;home:80442434512
tel;cell:80662933760
note:diyago@jabber.te.ua
x-mozilla-html:FALSE
version:2.1
end:vcard
^ permalink raw reply [flat|nested] 4+ messages in thread