[sisyphus] Clocksource tsc unstable

ALT Linux Sisyphus discussions
 help / color / mirror / Atom feed

* [sisyphus] Clocksource tsc unstable
@ 2008-12-09  5:56 Alexey Sidorov
  2008-12-09  7:03 ` Michail Yakushin
  2008-12-09  7:30 ` Alexander Bokovoy
  0 siblings, 2 replies; 6+ messages in thread
From: Alexey Sidorov @ 2008-12-09  5:56 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

Здравствуйте.
С некоторых пор начал наблюдать в системе проблемы со временем. Конкретно - сильно сбивались часы.
Никак не доходили руки разобраться, наконец добрался.
Вобщем ситуация такова
в 22:00 моя система начинает архивировать базы 1С. Забирает их с cifs, пакует 7z.
Делается это минут 40. Загрузка проца в это время, я полагаю, ~100%
И вот в этот период системное время съезжает на 300-400 секунд.
Ядро стояло std-def 2.6.25-alt9. В логах в этот период ничего подозрительного нет (кроме отчаянных 
попыток ntpd исправить положение)
Попробовал поставил wks-smp 2.6.26-alt5. Теперь получаю:

Dec  8 22:00:01 www crond[18095]: (root) CMD (/sbin/service ntpd stop; /usr/sbin/ntpdate 
pool.ntp.org; /sbin/service ntpd start)
Dec  8 22:00:03 www ntpd[15703]: dispatch_imsg in main: pipe closed
Dec  8 22:00:03 www ntpd[15703]: Terminating
Dec  8 22:00:03 www ntpd: ntpd shutdown succeeded
Dec  8 22:00:04 www myscripts: Start archive 1C
Dec  8 22:00:10 www ntpd: listening on 192.168.0.254
Dec  8 22:00:11 www ntpd: ntpd startup succeeded
Dec  8 22:01:01 www crond[18208]: (root) CMD (run-parts /etc/cron.hourly)
Dec  8 22:02:04 www kernel: [39372.516140] Clocksource tsc unstable (delta = 4686732243 ns)
<...cut...>
Dec  8 22:24:07 www winbindd[5757]: [2008/12/08 22:24:07, 0] lib/util_sock.c:write_data(564)
Dec  8 22:24:08 www winbindd[5757]:   write_data: write failure. Error = Connection reset by peer
Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0] libsmb/clientgen.c:write_socket(158)
Dec  8 22:24:08 www winbindd[5757]:   write_socket: Error writing 206 bytes to socket 17: ERRNO = 
Connection reset by peer
Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0] libsmb/clientgen.c:cli_send_smb(188)
Dec  8 22:24:08 www winbindd[5757]:   Error writing 206 bytes to client. -1 (Connection reset by peer)
Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Dec  8 22:24:08 www winbindd[5757]:   rpc_api_pipe: Remote machine server.reutman.local pipe \lsarpc 
fnum 0x51returned critical error. Error was Write error: Connection reset by peer
Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:08, 0] 
libsmb/cliconnect.c:cli_session_setup_spnego(859)
Dec  8 22:24:08 www winbindd[5757]:   Kinit failed: Clock skew too great
Dec  8 22:27:41 www myscripts: Archiving man_2008-12-08.7z [127 Mb] 27:37
<...cut...>
Dec  8 22:38:02 www ntpd[18153]: adjusting local clock by 309.307053s
<...cut...>
Dec  8 22:39:04 www myscripts: Archiving zik_2008-12-08.7z [55.3 Mb] 11:23
Dec  8 22:39:09 www myscripts: Archiving arenda_2008-12-08.7z [232 Kb] 0:05
Dec  8 22:39:09 www myscripts: Erase man_2008-11-07.7z : Ok
Dec  8 22:39:09 www myscripts: Erase zik_2008-11-07.7z : Ok
Dec  8 22:39:10 www myscripts: Erase arenda_2008-11-07.7z : Ok
Dec  8 22:39:10 www myscripts: Finish archive 1C
<...cut...>
Dec  8 22:47:10 www ntpd[18153]: adjusting local clock by 442.666651s

winbind впринципе постоянно так ругается. Кроме конечно "Kinit failed: Clock skew too great", 
возникающего именно в результате сползания часов.

Вопрос как всегда. Кто виноват, и что делать?

-- 
Alexey Sidorov
	mailto:alex@reutman.ru
	JID: alex@reutman.ru
	ICQ: 5052225

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [sisyphus] Clocksource tsc unstable
  2008-12-09  5:56 [sisyphus] Clocksource tsc unstable Alexey Sidorov
@ 2008-12-09  7:03 ` Michail Yakushin
  2008-12-09  7:33   ` Alexey Sidorov
  2008-12-10 21:23   ` Alexey Sidorov
  2008-12-09  7:30 ` Alexander Bokovoy
  1 sibling, 2 replies; 6+ messages in thread
From: Michail Yakushin @ 2008-12-09  7:03 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

Alexey Sidorov wrote:
> Здравствуйте.
> С некоторых пор начал наблюдать в системе проблемы со временем.
> Конкретно - сильно сбивались часы.
> Никак не доходили руки разобраться, наконец добрался.
> Вобщем ситуация такова
> в 22:00 моя система начинает архивировать базы 1С. Забирает их с cifs,
> пакует 7z.
> Делается это минут 40. Загрузка проца в это время, я полагаю, ~100%
> И вот в этот период системное время съезжает на 300-400 секунд.
> Ядро стояло std-def 2.6.25-alt9. В логах в этот период ничего
> подозрительного нет (кроме отчаянных попыток ntpd исправить положение)
> Попробовал поставил wks-smp 2.6.26-alt5. Теперь получаю:
> 
> Dec  8 22:00:01 www crond[18095]: (root) CMD (/sbin/service ntpd stop;
> /usr/sbin/ntpdate pool.ntp.org; /sbin/service ntpd start)
> Dec  8 22:00:03 www ntpd[15703]: dispatch_imsg in main: pipe closed
> Dec  8 22:00:03 www ntpd[15703]: Terminating
> Dec  8 22:00:03 www ntpd: ntpd shutdown succeeded
> Dec  8 22:00:04 www myscripts: Start archive 1C
> Dec  8 22:00:10 www ntpd: listening on 192.168.0.254
> Dec  8 22:00:11 www ntpd: ntpd startup succeeded
> Dec  8 22:01:01 www crond[18208]: (root) CMD (run-parts /etc/cron.hourly)
> Dec  8 22:02:04 www kernel: [39372.516140] Clocksource tsc unstable
> (delta = 4686732243 ns)
> <...cut...>
> Dec  8 22:24:07 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> lib/util_sock.c:write_data(564)
> Dec  8 22:24:08 www winbindd[5757]:   write_data: write failure. Error =
> Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> libsmb/clientgen.c:write_socket(158)
> Dec  8 22:24:08 www winbindd[5757]:   write_socket: Error writing 206
> bytes to socket 17: ERRNO = Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> libsmb/clientgen.c:cli_send_smb(188)
> Dec  8 22:24:08 www winbindd[5757]:   Error writing 206 bytes to client.
> -1 (Connection reset by peer)
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> rpc_client/cli_pipe.c:rpc_api_pipe(790)
> Dec  8 22:24:08 www winbindd[5757]:   rpc_api_pipe: Remote machine
> server.reutman.local pipe \lsarpc fnum 0x51returned critical error.
> Error was Write error: Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:08, 0]
> libsmb/cliconnect.c:cli_session_setup_spnego(859)
> Dec  8 22:24:08 www winbindd[5757]:   Kinit failed: Clock skew too great
> Dec  8 22:27:41 www myscripts: Archiving man_2008-12-08.7z [127 Mb] 27:37
> <...cut...>
> Dec  8 22:38:02 www ntpd[18153]: adjusting local clock by 309.307053s
> <...cut...>
> Dec  8 22:39:04 www myscripts: Archiving zik_2008-12-08.7z [55.3 Mb] 11:23
> Dec  8 22:39:09 www myscripts: Archiving arenda_2008-12-08.7z [232 Kb] 0:05
> Dec  8 22:39:09 www myscripts: Erase man_2008-11-07.7z : Ok
> Dec  8 22:39:09 www myscripts: Erase zik_2008-11-07.7z : Ok
> Dec  8 22:39:10 www myscripts: Erase arenda_2008-11-07.7z : Ok
> Dec  8 22:39:10 www myscripts: Finish archive 1C
> <...cut...>
> Dec  8 22:47:10 www ntpd[18153]: adjusting local clock by 442.666651s
> 
> winbind впринципе постоянно так ругается. Кроме конечно "Kinit failed:
> Clock skew too great", возникающего именно в результате сползания часов.
> 
> Вопрос как всегда. Кто виноват, и что делать?
> 
Можно примерно описать железо? интересует процессор и мат. плата.
Можете попробовать обновиться до 2.6.27
И dmesg с начала? там может быть что то интересное, можно поискать по
ключевому слову hpet


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [sisyphus] Clocksource tsc unstable
  2008-12-09  7:03 ` Michail Yakushin
@ 2008-12-09  7:33   ` Alexey Sidorov
  2008-12-09  7:37     ` Michail Yakushin
  2008-12-10 21:23   ` Alexey Sidorov
  1 sibling, 1 reply; 6+ messages in thread
From: Alexey Sidorov @ 2008-12-09  7:33 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

Michail Yakushin пишет:
> Можно примерно описать железо? интересует процессор и мат. плата.
Celeron 1700, http://www.epox.ru/products/mb/ep-4gem800i/

> Можете попробовать обновиться до 2.6.27
Ок, сегодня поставлю. Результаты завтра :)

> И dmesg с начала? там может быть что то интересное, можно поискать по
> ключевому слову hpet

alex:www ~$ dmesg 
      [    0.000000] Linux version 2.6.26-wks-smp-alt5 (builder@yalt64.vps) (gcc version 4.1.2 
20070626 (ALT Linux, build 4.1.2-alt3)) #1 SMP PREEMPT Fri Oct 17 15:10:17 UTC 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[    0.000000]  BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00f5a70] 000f5a70
[    0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   196592
[    0.000000]   HighMem    196592 ->   196592
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   196592
[    0.000000] On node 0 totalpages: 196592
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1504 pages used for memmap
[    0.000000]   Normal zone: 190992 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP 000F7610, 0014 (r0 IntelR)
[    0.000000] ACPI: RSDT 2FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 2FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 2FFF30C0, 3E7C (r1 INTELR AWRDACPI     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 2FFF0000, 0040
[    0.000000] ACPI: APIC 2FFF6F40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PERCPU: Allocating 40452 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195056
[    0.000000] Kernel command line: auto BOOT_IMAGE=2626-wks-smp-5 ro root=301
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Preemptible RCU implementation.
[    0.000000] CPU 0 irqstacks, hard=c0409000 soft=c0401000
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1716.938 MHz processor.
[    0.000999] Console: colour dummy device 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] Memory: 774608k/786368k available (1797k kernel code, 11296k reserved, 1006k data, 
240k init, 0k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
[    0.000999]       .init : 0xc03c2000 - 0xc03fe000   ( 240 kB)
[    0.000999]       .data : 0xc02c1775 - 0xc03bd240   (1006 kB)
[    0.000999]       .text : 0xc0100000 - 0xc02c1775   (1797 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.000999] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.060995] Calibrating delay using timer specific routine.. 3436.63 BogoMIPS (lpj=1718316)
[    0.061054] Security Framework initialized
[    0.061076] Capability LSM initialized
[    0.061105] Mount-cache hash table entries: 512
[    0.061439] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.061469] CPU: L2 cache: 128K
[    0.061482] CPU: Hyper-Threading is disabled
[    0.061500] Intel machine check architecture supported.
[    0.061525] Intel machine check reporting enabled on CPU#0.
[    0.061543] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[    0.061563] CPU0: Thermal monitoring enabled
[    0.061594] Checking 'hlt' instruction... OK.
[    0.065382] ACPI: Core revision 20080321
[    0.078987] ENABLING IO-APIC IRQs
[    0.078987] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088986] CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
[    0.088986] Brought up 1 CPUs
[    0.088986] Total of 1 processors activated (3436.63 BogoMIPS).
[    0.088986] CPU0 attaching sched-domain:
[    0.088986]  domain 0: span 0
[    0.088986]   groups: 0
[    0.088986] net_namespace: 500 bytes
[    0.089445] NET: Registered protocol family 16
[    0.090250] ACPI: bus type pci registered
[    0.116004] PCI: PCI BIOS revision 2.10 entry at 0xfb310, last bus=2
[    0.116033] PCI: Using configuration type 1 for base access
[    0.116058] Setting up standard PCI resources
[    0.136197] ACPI: EC: Look up EC in DSDT
[    0.146207] ACPI: Interpreter enabled
[    0.146232] ACPI: (supports S0 S1 S4 S5)
[    0.146281] ACPI: Using IOAPIC for interrupt routing
[    0.161551] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.162347] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[    0.162351] * this clock source is slow. If you are sure your timer does not have
[    0.162354] * this bug, please use "acpi_pm_good" to disable the workaround
[    0.162476] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[    0.162503] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[    0.163268] PCI: Transparent bridge - 0000:00:1e.0
[    0.163337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.163829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.201339] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.201624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.201899] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.202234] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.202512] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.202793] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.203108] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.203388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.203995] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.204161] pnp: PnP ACPI init
[    0.204196] ACPI: bus type pnp registered
[    0.214893] pnp: PnP ACPI: found 16 devices
[    0.214919] ACPI: ACPI bus type pnp unregistered
[    0.214939] PnPBIOS: Disabled by ACPI PNP
[    0.216225] PCI: Using ACPI for IRQ routing
[    0.229031] system 00:03: ioport range 0x400-0x4bf could not be reserved
[    0.229072] system 00:04: ioport range 0xb78-0xb7b has been reserved
[    0.229095] system 00:04: ioport range 0xf78-0xf7b has been reserved
[    0.229117] system 00:04: ioport range 0xa78-0xa7b has been reserved
[    0.229137] system 00:04: ioport range 0xe78-0xe7b has been reserved
[    0.229158] system 00:04: ioport range 0xbbc-0xbbf has been reserved
[    0.229178] system 00:04: ioport range 0xfbc-0xfbf has been reserved
[    0.229198] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.229228] system 00:04: ioport range 0x294-0x297 has been reserved
[    0.229248] system 00:04: ioport range 0x4e0-0x4e7 has been reserved
[    0.261090] PCI: Bridge: 0000:00:01.0
[    0.261111]   IO window: disabled.
[    0.261129]   MEM window: 0xe6000000-0xe7ffffff
[    0.261148]   PREFETCH window: 0x00000000e4000000-0x00000000e5ffffff
[    0.261177] PCI: Bridge: 0000:00:1e.0
[    0.261192]   IO window: c000-cfff
[    0.261209]   MEM window: 0xe8000000-0xe9ffffff
[    0.261227]   PREFETCH window: 0x0000000040000000-0x00000000400fffff
[    0.261270] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.261298] NET: Registered protocol family 2
[    0.279076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.279730] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.281462] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.282366] TCP: Hash tables configured (established 131072 bind 65536)
[    0.282407] TCP reno registered
[    0.288137] NET: Registered protocol family 1
[    0.288383] checking if image is initramfs... it is
[    0.376492] Freeing initrd memory: 582k freed
[    0.378463] audit: initializing netlink socket (disabled)
[    0.378510] type=2000 audit(1228732552.377:1): initialized
[    0.381655] Total HugeTLB memory allocated, 0
[    0.388603] VFS: Disk quotas dquot_6.5.1
[    0.388917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.389457] msgmni has been set to 1514
[    0.390224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.390259] io scheduler noop registered
[    0.390272] io scheduler anticipatory registered
[    0.390288] io scheduler deadline registered
[    0.390341] io scheduler cfq registered (default)
[    0.390491] pci 0000:01:00.0: Boot video device
[    0.392173] vesafb: framebuffer at 0xe4000000, mapped to 0xf0880000, using 4096k, total 4096k
[    0.392208] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[    0.392229] vesafb: protected mode interface info at c000:02e5
[    0.392250] vesafb: pmi: set display start = c00c031e, set palette = c00c0394
[    0.392272] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 
3d2 3d3 3d4 3d5 3da
[    0.392345] vesafb: scrolling: redraw
[    0.392360] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.466457] Console: switching to colour frame buffer device 160x64
[    0.535109] fb0: VESA VGA frame buffer device
[    0.535786] isapnp: Scanning for PnP cards...
[    0.761866] Switched to high resolution mode on CPU 0
[    0.849618] isapnp: No Plug & Play device found
[    0.860711] Real Time Clock Driver v1.12ac
[    0.861486] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.862606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.863442] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.865191] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.866273] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.873056] brd: module loaded
[    0.873564] input: Macintosh mouse button emulation as /class/input/input0
[    0.874651] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.877865] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.878331] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.884579] mice: PS/2 mouse device common for all mice
[    0.885004] cpuidle: using governor ladder
[    0.885387] cpuidle: using governor menu
[    0.887482] TCP bic registered
[    0.887759] Using IPI No-Shortcut mode
[    0.888320] registered taskstats version 1
[    0.889384] Freeing unused kernel memory: 240k freed
[    0.889888] Write protecting the kernel text: 1800k
[    0.890337] Write protecting the kernel read-only data: 832k
[    0.910506] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.138253] Uniform Multi-Platform E-IDE driver
[    1.138658] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.145622] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at  PCI slot 0000:00:1f.1
[    1.146328] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    1.146991] ICH4: not 100% native mode: will probe irqs later
[    1.147508]     ide0: BM-DMA at 0xf000-0xf007
[    1.169451]     ide1: BM-DMA at 0xf008-0xf00f
[    1.189999] Probing IDE interface ide0...
[    1.453187] hda: Maxtor 6Y060L0, ATA DISK drive
[    2.086077] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    2.086218] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[    2.107516] hda: UDMA/33 mode selected
[    2.128447] Probing IDE interface ide1...
[    2.800187] hdc: MATSHITA CR-594, ATAPI CD/DVD-ROM drive
[    3.127992] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.128318] hdc: UDMA/33 mode selected
[    3.149759] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.187033] ide1 at 0x170-0x177,0x376 on irq 15
[    3.217711] hda: max request size: 128KiB
[    3.242017] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63
[    3.272436] hda: cache flushes supported
[    3.294017] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA 
IDE ports
[    3.316200]  hda:<3>ide_generic: I/O resource 0x1F0-0x1F7 not free.
[    3.338643]  hda1 hda2 hda3
[    3.361006] ide_generic: I/O resource 0x170-0x177 not free.
[    3.418517] SCSI subsystem initialized
[    3.450573] Driver 'sd' needs updating - please use bus_type methods
[    3.485660] No dock devices found.
[    3.542813] libata version 3.00 loaded.
[    4.161503] kjournald starting.  Commit interval 5 seconds
[    4.182414] EXT3-fs: mounted filesystem with ordered data mode.
[    6.479926] 8139too Fast Ethernet driver 0.9.28
[    6.480004] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    6.480899] eth0: RealTek RTL8139 at 0xf0854000, 00:80:48:18:1e:31, IRQ 17
[    6.480907] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    6.480961] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
[    6.481867] eth1: RealTek RTL8139 at 0xf0856000, 00:50:22:b4:db:19, IRQ 18
[    6.481874] eth1:  Identified 8139 chip type 'RTL-8139C'
[    6.481922] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 19 (level, low) -> IRQ 19
[    6.482834] eth2: RealTek RTL8139 at 0xf0858000, 00:50:22:b4:da:84, IRQ 19
[    6.482841] eth2:  Identified 8139 chip type 'RTL-8139C'
[    8.752224] Linux agpgart interface v0.103
[    8.772439] ACPI: ACPI0007:00 is registered as cooling_device0
[    8.783831] input: Power Button (FF) as /class/input/input2
[    8.805510] agpgart: Detected an Intel 830M Chipset.
[    8.807150] ACPI: Power Button (FF) [PWRF]
[    8.807369] input: Power Button (CM) as /class/input/input3
[    8.809950] agpgart: AGP aperture is 64M @ 0xe0000000
[    8.830163] ACPI: Power Button (CM) [PWRB]
[    8.832150] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    8.832711] ACPI: Thermal Zone [THRM] (37 C)
[    8.920378] ACPI: PNP0C0B:00 is registered as cooling_device1
[    8.920396] ACPI: Fan [FAN] (on)
[    8.994355] usbcore: registered new interface driver usbfs
[    8.994427] usbcore: registered new interface driver hub
[    8.999128] usbcore: registered new device driver usb
[    9.010267] USB Universal Host Controller Interface driver v3.0
[    9.010368] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[    9.010390] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    9.010397] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.010738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    9.010791] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[    9.010989] usb usb1: configuration #1 chosen from 1 choice
[    9.011108] hub 1-0:1.0: USB hub found
[    9.011132] hub 1-0:1.0: 2 ports detected
[    9.112363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    9.112372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.112378] usb usb1: Product: UHCI Host Controller
[    9.112383] usb usb1: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[    9.112388] usb usb1: SerialNumber: 0000:00:1d.0
[    9.112495] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[    9.112529] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    9.112536] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    9.112616] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    9.116560] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[    9.116589] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea000000
[    9.126065] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    9.126260] usb usb2: configuration #1 chosen from 1 choice
[    9.126331] hub 2-0:1.0: USB hub found
[    9.126353] hub 2-0:1.0: 6 ports detected
[    9.140352] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    9.140364] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[    9.220619] input: PC Speaker as /class/input/input4
[    9.227333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    9.227341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.227347] usb usb2: Product: EHCI Host Controller
[    9.227351] usb usb2: Manufacturer: Linux 2.6.26-wks-smp-alt5 ehci_hcd
[    9.227356] usb usb2: SerialNumber: 0000:00:1d.7
[    9.227418] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    9.227439] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    9.227447] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.227518] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    9.227565] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    9.227778] usb usb3: configuration #1 chosen from 1 choice
[    9.227869] hub 3-0:1.0: USB hub found
[    9.227895] hub 3-0:1.0: 2 ports detected
[    9.229805] hdc: ATAPI 48X CD-ROM drive, 128kB Cache
[    9.229819] Uniform CD-ROM driver Revision: 3.20
[    9.328314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    9.328322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.328328] usb usb3: Product: UHCI Host Controller
[    9.328332] usb usb3: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[    9.328337] usb usb3: SerialNumber: 0000:00:1d.1
[    9.329517] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[    9.329689] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[    9.336008] eth3: VIA Rhine III at 0xe9003000, 00:04:61:50:5d:cf, IRQ 22.
[    9.336487] eth3: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    9.338169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    9.338193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    9.338201] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.338289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    9.338337] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    9.338534] usb usb4: configuration #1 chosen from 1 choice
[    9.338624] hub 4-0:1.0: USB hub found
[    9.338649] hub 4-0:1.0: 2 ports detected
[    9.439319] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    9.439327] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.439333] usb usb4: Product: UHCI Host Controller
[    9.439337] usb usb4: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[    9.439342] usb usb4: SerialNumber: 0000:00:1d.2
[   10.105715] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[   10.452829] Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k
[   10.491541] Adding 1044216k swap on /dev/hda3.  Priority:-2 extents:1 across:1044216k
[   10.859636] EXT3 FS on hda1, internal journal
[   15.312052] device-mapper: uevent: version 1.0.3
[   15.315835] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[   26.408936] ip_tables: (C) 2000-2006 Netfilter Core Team
[   26.475740] nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
[   30.409395] dima: link up, 100Mbps, full-duplex, lpa 0x45E1
[   30.958057] reutman: link up, 100Mbps, full-duplex, lpa 0x45E1
[   31.514975] rosnet: link up, 100Mbps, full-duplex, lpa 0x41E1
[   34.203523] RPC: Registered udp transport module.
[   34.203532] RPC: Registered tcp transport module.
[   35.621697] w83627hf: Found W83627HF chip at 0x290
[   48.677364] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   48.763413] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   48.881441] NFSD: starting 90-second grace period
[   50.020764] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[  239.102643] loop: module loaded
[39372.516140] Clocksource tsc unstable (delta = 4686732243 ns)


-- 
Alexey Sidorov
	mailto:alex@reutman.ru
	JID: alex@reutman.ru
	ICQ: 5052225


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [sisyphus] Clocksource tsc unstable
  2008-12-09  7:33   ` Alexey Sidorov
@ 2008-12-09  7:37     ` Michail Yakushin
  0 siblings, 0 replies; 6+ messages in thread
From: Michail Yakushin @ 2008-12-09  7:37 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

Alexey Sidorov wrote:
> Michail Yakushin пишет:
>> Можно примерно описать железо? интересует процессор и мат. плата.
> Celeron 1700, http://www.epox.ru/products/mb/ep-4gem800i/
> 
>> Можете попробовать обновиться до 2.6.27
> Ок, сегодня поставлю. Результаты завтра :)
> 
>> И dmesg с начала? там может быть что то интересное, можно поискать по
>> ключевому слову hpet
> 
> alex:www ~$ dmesg      [    0.000000] Linux version 2.6.26-wks-smp-alt5
> (builder@yalt64.vps) (gcc version 4.1.2 20070626 (ALT Linux, build
> 4.1.2-alt3)) #1 SMP PREEMPT Fri Oct 17 15:10:17 UTC 2008
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> [    0.000000]  BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [    0.000000] 0MB HIGHMEM available.
> [    0.000000] 767MB LOWMEM available.
> [    0.000000] found SMP MP-table at [c00f5a70] 000f5a70
> [    0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256
> used
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA             0 ->     4096
> [    0.000000]   Normal       4096 ->   196592
> [    0.000000]   HighMem    196592 ->   196592
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[1] active PFN ranges
> [    0.000000]     0:        0 ->   196592
> [    0.000000] On node 0 totalpages: 196592
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
> [    0.000000]   Normal zone: 1504 pages used for memmap
> [    0.000000]   Normal zone: 190992 pages, LIFO batch:31
> [    0.000000]   HighMem zone: 0 pages used for memmap
> [    0.000000]   Movable zone: 0 pages used for memmap
> [    0.000000] DMI 2.2 present.
> [    0.000000] ACPI: RSDP 000F7610, 0014 (r0 IntelR)
> [    0.000000] ACPI: RSDT 2FFF3000, 002C (r1 IntelR AWRDACPI 42302E31
> AWRD        0)
> [    0.000000] ACPI: FACP 2FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31
> AWRD        0)
> [    0.000000] ACPI: DSDT 2FFF30C0, 3E7C (r1 INTELR AWRDACPI     1000
> MSFT  100000D)
> [    0.000000] ACPI: FACS 2FFF0000, 0040
> [    0.000000] ACPI: APIC 2FFF6F40, 0068 (r1 IntelR AWRDACPI 42302E31
> AWRD        0)
> [    0.000000] ACPI: PM-Timer IO Port: 0x408
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
> 0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] Allocating PCI resources starting at 40000000 (gap:
> 30000000:cec00000)
> [    0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> [    0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
> [    0.000000] PERCPU: Allocating 40452 bytes of per cpu data
> [    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
> Total pages: 195056
> [    0.000000] Kernel command line: auto BOOT_IMAGE=2626-wks-smp-5 ro
> root=301
> [    0.000000] mapped APIC to ffffb000 (fee00000)
> [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] Preemptible RCU implementation.
> [    0.000000] CPU 0 irqstacks, hard=c0409000 soft=c0401000
> [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [    0.000000] Detected 1716.938 MHz processor.
> [    0.000999] Console: colour dummy device 80x25
> [    0.000999] console [tty0] enabled
> [    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [    0.000999] Memory: 774608k/786368k available (1797k kernel code,
> 11296k reserved, 1006k data, 240k init, 0k highmem)
> [    0.000999] virtual kernel memory layout:
> [    0.000999]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
> [    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
> [    0.000999]     vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
> [    0.000999]     lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
> [    0.000999]       .init : 0xc03c2000 - 0xc03fe000   ( 240 kB)
> [    0.000999]       .data : 0xc02c1775 - 0xc03bd240   (1006 kB)
> [    0.000999]       .text : 0xc0100000 - 0xc02c1775   (1797 kB)
> [    0.000999] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
> [    0.000999] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0,
> CPUs=2, Nodes=1
> [    0.060995] Calibrating delay using timer specific routine.. 3436.63
> BogoMIPS (lpj=1718316)
> [    0.061054] Security Framework initialized
> [    0.061076] Capability LSM initialized
> [    0.061105] Mount-cache hash table entries: 512
> [    0.061439] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [    0.061469] CPU: L2 cache: 128K
> [    0.061482] CPU: Hyper-Threading is disabled
> [    0.061500] Intel machine check architecture supported.
> [    0.061525] Intel machine check reporting enabled on CPU#0.
> [    0.061543] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> [    0.061563] CPU0: Thermal monitoring enabled
> [    0.061594] Checking 'hlt' instruction... OK.
> [    0.065382] ACPI: Core revision 20080321
> [    0.078987] ENABLING IO-APIC IRQs
> [    0.078987] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.088986] CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
> [    0.088986] Brought up 1 CPUs
> [    0.088986] Total of 1 processors activated (3436.63 BogoMIPS).
> [    0.088986] CPU0 attaching sched-domain:
> [    0.088986]  domain 0: span 0
> [    0.088986]   groups: 0
> [    0.088986] net_namespace: 500 bytes
> [    0.089445] NET: Registered protocol family 16
> [    0.090250] ACPI: bus type pci registered
> [    0.116004] PCI: PCI BIOS revision 2.10 entry at 0xfb310, last bus=2
> [    0.116033] PCI: Using configuration type 1 for base access
> [    0.116058] Setting up standard PCI resources
> [    0.136197] ACPI: EC: Look up EC in DSDT
> [    0.146207] ACPI: Interpreter enabled
> [    0.146232] ACPI: (supports S0 S1 S4 S5)
> [    0.146281] ACPI: Using IOAPIC for interrupt routing
> [    0.161551] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [    0.162347] * The chipset may have PM-Timer Bug. Due to workarounds
> for a bug,
> [    0.162351] * this clock source is slow. If you are sure your timer
> does not have
> [    0.162354] * this bug, please use "acpi_pm_good" to disable the
> workaround
> [    0.162476] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4
> ACPI/GPIO/TCO
> [    0.162503] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4
> GPIO
> [    0.163268] PCI: Transparent bridge - 0000:00:1e.0
> [    0.163337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.163829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> [    0.201339] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12
> 14 15)
> [    0.201624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12
> 14 15)
> [    0.201899] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12
> 14 15)
> [    0.202234] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12
> 14 15)
> [    0.202512] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12
> 14 15) *0, disabled.
> [    0.202793] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12
> 14 15) *0, disabled.
> [    0.203108] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12
> 14 15)
> [    0.203388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12
> 14 15)
> [    0.203995] Linux Plug and Play Support v0.97 (c) Adam Belay
> [    0.204161] pnp: PnP ACPI init
> [    0.204196] ACPI: bus type pnp registered
> [    0.214893] pnp: PnP ACPI: found 16 devices
> [    0.214919] ACPI: ACPI bus type pnp unregistered
> [    0.214939] PnPBIOS: Disabled by ACPI PNP
> [    0.216225] PCI: Using ACPI for IRQ routing
> [    0.229031] system 00:03: ioport range 0x400-0x4bf could not be reserved
> [    0.229072] system 00:04: ioport range 0xb78-0xb7b has been reserved
> [    0.229095] system 00:04: ioport range 0xf78-0xf7b has been reserved
> [    0.229117] system 00:04: ioport range 0xa78-0xa7b has been reserved
> [    0.229137] system 00:04: ioport range 0xe78-0xe7b has been reserved
> [    0.229158] system 00:04: ioport range 0xbbc-0xbbf has been reserved
> [    0.229178] system 00:04: ioport range 0xfbc-0xfbf has been reserved
> [    0.229198] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> [    0.229228] system 00:04: ioport range 0x294-0x297 has been reserved
> [    0.229248] system 00:04: ioport range 0x4e0-0x4e7 has been reserved
> [    0.261090] PCI: Bridge: 0000:00:01.0
> [    0.261111]   IO window: disabled.
> [    0.261129]   MEM window: 0xe6000000-0xe7ffffff
> [    0.261148]   PREFETCH window: 0x00000000e4000000-0x00000000e5ffffff
> [    0.261177] PCI: Bridge: 0000:00:1e.0
> [    0.261192]   IO window: c000-cfff
> [    0.261209]   MEM window: 0xe8000000-0xe9ffffff
> [    0.261227]   PREFETCH window: 0x0000000040000000-0x00000000400fffff
> [    0.261270] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [    0.261298] NET: Registered protocol family 2
> [    0.279076] IP route cache hash table entries: 32768 (order: 5,
> 131072 bytes)
> [    0.279730] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [    0.281462] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [    0.282366] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.282407] TCP reno registered
> [    0.288137] NET: Registered protocol family 1
> [    0.288383] checking if image is initramfs... it is
> [    0.376492] Freeing initrd memory: 582k freed
> [    0.378463] audit: initializing netlink socket (disabled)
> [    0.378510] type=2000 audit(1228732552.377:1): initialized
> [    0.381655] Total HugeTLB memory allocated, 0
> [    0.388603] VFS: Disk quotas dquot_6.5.1
> [    0.388917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    0.389457] msgmni has been set to 1514
> [    0.390224] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 254)
> [    0.390259] io scheduler noop registered
> [    0.390272] io scheduler anticipatory registered
> [    0.390288] io scheduler deadline registered
> [    0.390341] io scheduler cfq registered (default)
> [    0.390491] pci 0000:01:00.0: Boot video device
> [    0.392173] vesafb: framebuffer at 0xe4000000, mapped to 0xf0880000,
> using 4096k, total 4096k
> [    0.392208] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
> [    0.392229] vesafb: protected mode interface info at c000:02e5
> [    0.392250] vesafb: pmi: set display start = c00c031e, set palette =
> c00c0394
> [    0.392272] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7
> 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
> [    0.392345] vesafb: scrolling: redraw
> [    0.392360] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> [    0.466457] Console: switching to colour frame buffer device 160x64
> [    0.535109] fb0: VESA VGA frame buffer device
> [    0.535786] isapnp: Scanning for PnP cards...
> [    0.761866] Switched to high resolution mode on CPU 0
> [    0.849618] isapnp: No Plug & Play device found
> [    0.860711] Real Time Clock Driver v1.12ac
> [    0.861486] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [    0.862606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.863442] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [    0.865191] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.866273] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [    0.873056] brd: module loaded
> [    0.873564] input: Macintosh mouse button emulation as
> /class/input/input0
> [    0.874651] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
> 0x60,0x64 irq 1,12
> [    0.877865] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    0.878331] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    0.884579] mice: PS/2 mouse device common for all mice
> [    0.885004] cpuidle: using governor ladder
> [    0.885387] cpuidle: using governor menu
> [    0.887482] TCP bic registered
> [    0.887759] Using IPI No-Shortcut mode
> [    0.888320] registered taskstats version 1
> [    0.889384] Freeing unused kernel memory: 240k freed
> [    0.889888] Write protecting the kernel text: 1800k
> [    0.890337] Write protecting the kernel read-only data: 832k
> [    0.910506] input: AT Translated Set 2 keyboard as /class/input/input1
> [    1.138253] Uniform Multi-Platform E-IDE driver
> [    1.138658] ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> [    1.145622] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at  PCI
> slot 0000:00:1f.1
> [    1.146328] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
> low) -> IRQ 18
> [    1.146991] ICH4: not 100% native mode: will probe irqs later
> [    1.147508]     ide0: BM-DMA at 0xf000-0xf007
> [    1.169451]     ide1: BM-DMA at 0xf008-0xf00f
> [    1.189999] Probing IDE interface ide0...
> [    1.453187] hda: Maxtor 6Y060L0, ATA DISK drive
> [    2.086077] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [    2.086218] hda: host side 80-wire cable detection failed, limiting
> max speed to UDMA33
> [    2.107516] hda: UDMA/33 mode selected
> [    2.128447] Probing IDE interface ide1...
> [    2.800187] hdc: MATSHITA CR-594, ATAPI CD/DVD-ROM drive
> [    3.127992] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [    3.128318] hdc: UDMA/33 mode selected
> [    3.149759] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [    3.187033] ide1 at 0x170-0x177,0x376 on irq 15
> [    3.217711] hda: max request size: 128KiB
> [    3.242017] hda: 120103200 sectors (61492 MB) w/2048KiB Cache,
> CHS=65535/16/63
> [    3.272436] hda: cache flushes supported
> [    3.294017] ide_generic: please use "probe_mask=0x3f" module
> parameter for probing all legacy ISA IDE ports
> [    3.316200]  hda:<3>ide_generic: I/O resource 0x1F0-0x1F7 not free.
> [    3.338643]  hda1 hda2 hda3
> [    3.361006] ide_generic: I/O resource 0x170-0x177 not free.
> [    3.418517] SCSI subsystem initialized
> [    3.450573] Driver 'sd' needs updating - please use bus_type methods
> [    3.485660] No dock devices found.
> [    3.542813] libata version 3.00 loaded.
> [    4.161503] kjournald starting.  Commit interval 5 seconds
> [    4.182414] EXT3-fs: mounted filesystem with ordered data mode.
> [    6.479926] 8139too Fast Ethernet driver 0.9.28
> [    6.480004] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level,
> low) -> IRQ 17
> [    6.480899] eth0: RealTek RTL8139 at 0xf0854000, 00:80:48:18:1e:31,
> IRQ 17
> [    6.480907] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
> [    6.480961] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level,
> low) -> IRQ 18
> [    6.481867] eth1: RealTek RTL8139 at 0xf0856000, 00:50:22:b4:db:19,
> IRQ 18
> [    6.481874] eth1:  Identified 8139 chip type 'RTL-8139C'
> [    6.481922] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 19 (level,
> low) -> IRQ 19
> [    6.482834] eth2: RealTek RTL8139 at 0xf0858000, 00:50:22:b4:da:84,
> IRQ 19
> [    6.482841] eth2:  Identified 8139 chip type 'RTL-8139C'
> [    8.752224] Linux agpgart interface v0.103
> [    8.772439] ACPI: ACPI0007:00 is registered as cooling_device0
> [    8.783831] input: Power Button (FF) as /class/input/input2
> [    8.805510] agpgart: Detected an Intel 830M Chipset.
> [    8.807150] ACPI: Power Button (FF) [PWRF]
> [    8.807369] input: Power Button (CM) as /class/input/input3
> [    8.809950] agpgart: AGP aperture is 64M @ 0xe0000000
> [    8.830163] ACPI: Power Button (CM) [PWRB]
> [    8.832150] ACPI: LNXTHERM:01 is registered as thermal_zone0
> [    8.832711] ACPI: Thermal Zone [THRM] (37 C)
> [    8.920378] ACPI: PNP0C0B:00 is registered as cooling_device1
> [    8.920396] ACPI: Fan [FAN] (on)
> [    8.994355] usbcore: registered new interface driver usbfs
> [    8.994427] usbcore: registered new interface driver hub
> [    8.999128] usbcore: registered new device driver usb
> [    9.010267] USB Universal Host Controller Interface driver v3.0
> [    9.010368] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
> low) -> IRQ 16
> [    9.010390] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [    9.010397] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [    9.010738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 1
> [    9.010791] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
> [    9.010989] usb usb1: configuration #1 chosen from 1 choice
> [    9.011108] hub 1-0:1.0: USB hub found
> [    9.011132] hub 1-0:1.0: 2 ports detected
> [    9.112363] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> [    9.112372] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    9.112378] usb usb1: Product: UHCI Host Controller
> [    9.112383] usb usb1: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
> [    9.112388] usb usb1: SerialNumber: 0000:00:1d.0
> [    9.112495] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
> low) -> IRQ 23
> [    9.112529] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [    9.112536] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [    9.112616] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 2
> [    9.116560] PCI: cache line size of 128 is not supported by device
> 0000:00:1d.7
> [    9.116589] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea000000
> [    9.126065] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
> 10 Dec 2004
> [    9.126260] usb usb2: configuration #1 chosen from 1 choice
> [    9.126331] hub 2-0:1.0: USB hub found
> [    9.126353] hub 2-0:1.0: 6 ports detected
> [    9.140352] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
> Becker
> [    9.140364] via-rhine: Broken BIOS detected, avoid_D3 enabled.
> [    9.220619] input: PC Speaker as /class/input/input4
> [    9.227333] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
> [    9.227341] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    9.227347] usb usb2: Product: EHCI Host Controller
> [    9.227351] usb usb2: Manufacturer: Linux 2.6.26-wks-smp-alt5 ehci_hcd
> [    9.227356] usb usb2: SerialNumber: 0000:00:1d.7
> [    9.227418] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
> low) -> IRQ 19
> [    9.227439] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [    9.227447] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [    9.227518] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 3
> [    9.227565] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
> [    9.227778] usb usb3: configuration #1 chosen from 1 choice
> [    9.227869] hub 3-0:1.0: USB hub found
> [    9.227895] hub 3-0:1.0: 2 ports detected
> [    9.229805] hdc: ATAPI 48X CD-ROM drive, 128kB Cache
> [    9.229819] Uniform CD-ROM driver Revision: 3.20
> [    9.328314] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0001
> [    9.328322] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    9.328328] usb usb3: Product: UHCI Host Controller
> [    9.328332] usb usb3: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
> [    9.328337] usb usb3: SerialNumber: 0000:00:1d.1
> [    9.329517] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level,
> low) -> IRQ 17
> [    9.329689] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level,
> low) -> IRQ 22
> [    9.336008] eth3: VIA Rhine III at 0xe9003000, 00:04:61:50:5d:cf, IRQ
> 22.
> [    9.336487] eth3: MII PHY found at address 1, status 0x786d
> advertising 05e1 Link 45e1.
> [    9.338169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
> low) -> IRQ 18
> [    9.338193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [    9.338201] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [    9.338289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 4
> [    9.338337] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
> [    9.338534] usb usb4: configuration #1 chosen from 1 choice
> [    9.338624] hub 4-0:1.0: USB hub found
> [    9.338649] hub 4-0:1.0: 2 ports detected
> [    9.439319] usb usb4: New USB device found, idVendor=1d6b,
> idProduct=0001
> [    9.439327] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    9.439333] usb usb4: Product: UHCI Host Controller
> [    9.439337] usb usb4: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
> [    9.439342] usb usb4: SerialNumber: 0000:00:1d.2
> [   10.105715] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
> [   10.452829] Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1
> across:1052248k
> [   10.491541] Adding 1044216k swap on /dev/hda3.  Priority:-2 extents:1
> across:1044216k
> [   10.859636] EXT3 FS on hda1, internal journal
> [   15.312052] device-mapper: uevent: version 1.0.3
> [   15.315835] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
> initialised: dm-devel@redhat.com
> [   26.408936] ip_tables: (C) 2000-2006 Netfilter Core Team
> [   26.475740] nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
> [   30.409395] dima: link up, 100Mbps, full-duplex, lpa 0x45E1
> [   30.958057] reutman: link up, 100Mbps, full-duplex, lpa 0x45E1
> [   31.514975] rosnet: link up, 100Mbps, full-duplex, lpa 0x41E1
> [   34.203523] RPC: Registered udp transport module.
> [   34.203532] RPC: Registered tcp transport module.
> [   35.621697] w83627hf: Found W83627HF chip at 0x290
> [   48.677364] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [   48.763413] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
> recovery directory
> [   48.881441] NFSD: starting 90-second grace period
> [   50.020764] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation
> available
> [  239.102643] loop: module loaded
> [39372.516140] Clocksource tsc unstable (delta = 4686732243 ns)
> 
> 
И ещё попробуйте выгрузить p4-clockmod


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [sisyphus] Clocksource tsc unstable
  2008-12-09  7:03 ` Michail Yakushin
  2008-12-09  7:33   ` Alexey Sidorov
@ 2008-12-10 21:23   ` Alexey Sidorov
  1 sibling, 0 replies; 6+ messages in thread
From: Alexey Sidorov @ 2008-12-10 21:23 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

Michail Yakushin пишет:
> Можете попробовать обновиться до 2.6.27

Ого, помогло.
Интересно, что с < 2.6.27 было?

-- 
Alexey Sidorov
     mailto:alex@reutman.ru
     JID: alex@reutman.ru
     ICQ: 5052225



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [sisyphus] Clocksource tsc unstable
  2008-12-09  5:56 [sisyphus] Clocksource tsc unstable Alexey Sidorov
  2008-12-09  7:03 ` Michail Yakushin
@ 2008-12-09  7:30 ` Alexander Bokovoy
  1 sibling, 0 replies; 6+ messages in thread
From: Alexander Bokovoy @ 2008-12-09  7:30 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions

2008/12/9 Alexey Sidorov <alex@reutman.ru>:
> Dec  8 22:24:07 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> lib/util_sock.c:write_data(564)
> Dec  8 22:24:08 www winbindd[5757]:   write_data: write failure. Error =
> Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> libsmb/clientgen.c:write_socket(158)
> Dec  8 22:24:08 www winbindd[5757]:   write_socket: Error writing 206 bytes
> to socket 17: ERRNO = Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> libsmb/clientgen.c:cli_send_smb(188)
> Dec  8 22:24:08 www winbindd[5757]:   Error writing 206 bytes to client. -1
> (Connection reset by peer)
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:07, 0]
> rpc_client/cli_pipe.c:rpc_api_pipe(790)
> Dec  8 22:24:08 www winbindd[5757]:   rpc_api_pipe: Remote machine
> server.reutman.local pipe \lsarpc fnum 0x51returned critical error. Error
> was Write error: Connection reset by peer
> Dec  8 22:24:08 www winbindd[5757]: [2008/12/08 22:24:08, 0]
> libsmb/cliconnect.c:cli_session_setup_spnego(859)
> Dec  8 22:24:08 www winbindd[5757]:   Kinit failed: Clock skew too great
> winbind впринципе постоянно так ругается. Кроме конечно "Kinit failed: Clock
> skew too great", возникающего именно в результате сползания часов.
>
> Вопрос как всегда. Кто виноват, и что делать?
Явно исправлять проблему со временем, а то, что сессии рвутся, может
быть с этим и связано, особенно учитывая, что все это происходит на
LSA (аутентификация) в сочетании с krb5.


-- 
/ Alexander Bokovoy

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2008-12-10 21:23 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-12-09  5:56 [sisyphus] Clocksource tsc unstable Alexey Sidorov
2008-12-09  7:03 ` Michail Yakushin
2008-12-09  7:33   ` Alexey Sidorov
2008-12-09  7:37     ` Michail Yakushin
2008-12-10 21:23   ` Alexey Sidorov
2008-12-09  7:30 ` Alexander Bokovoy

ALT Linux Sisyphus discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
		sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
	public-inbox-index sisyphus

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.sisyphus


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git