Re: [sisyphus] Криво пропагрейдился компакт 2,3 до сизифа

["Vladimir A. Svyatoshenko" <svyt@nmu.org.ua>]

[-- Attachment #1: Type: text/plain, Size: 780 bytes --]

Gor_lov aka Stalker wrote:

>Здравствуйте, Мельников.
>
>Вы писали 8 ноября 2004 г., 12:16:09:
>
>  
>
>>>>>P.S. Вот думаю- под саму видеокарту драйвер придётся переустановить
>>>>>или нет? Если придётся- то какой- их в сизифе под АТИ несколько?
>>>>>Сейчас вот  стоит kernel-modules-fglrx-std-up-1.0.3.2.8-alt3.1
>>>>>          
>>>>>
>ММ>>> Под xorg надо xorg-x11-drv-ati
>  
>
>>>То есть этот вынести из системы?
>>>      
>>>
>ММ> Точно.
>
>Теоретический вопрос -если в системе есть kernel-modules-fglrx и
>xorg надо xorg-x11-drv-ati  -то может ли из-за этого startx говорить
>что скрины не найдены?
>
>P.S. У кого карточка от ATI и драйвера из сизифа- поделитесь в привате
>конфигом пожалуста...
>
>  
>
Держи.
Не забудь прописать agpgart в /etc/modules для аппаратного 3D.


[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 6450 bytes --]


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "kbd"
    Option "AutoRepeat"  "250 30"

    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,ru"
    Option "XkbVariant"  ",winkeys,winkeys"
    Option "XkbOptions"  "grp:ctrl_shift_toggle"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/mouse"
    Option "ZAxisMapping" "4 5"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

# This loads the Video for Linux module.
    Load        "v4l"

    Load	"/usr/X11R6/lib/modules/extensions/libglx.a"
    Load	"dri"
    Load	"fi1236"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"

    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection


Section "DRI"
    Mode	0666
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "ViewSonic|ViewSonic P655"
    VendorName "ViewSonic"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-70


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-180


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "ATI Radeon RV280"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "radeon"
#    Driver      "ati"
#    VideoRam    131072
#   ChipId 0x5961
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "AGPMode"  "2"
    Option      "DPMS"  "on"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
#    Device	Generic VGA
    Device      "ATI Radeon RV280"
    Monitor     "ViewSonic|ViewSonic P655"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "640x400"	
#        Modes       "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"

    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection