* [sisyphus] motion + FFmpeg
@ 2004-10-05 6:29 Alexander Markelov
2004-10-05 6:56 ` Yury Kashtanov
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Markelov @ 2004-10-05 6:29 UTC (permalink / raw)
To: sisyphus
Доброго времени суток!
У кого нибудь получилось заставить motion писать mpeg1 или mpeg4 ?
Использую последний motion из сизифа.
Вот кусок из motion.conf относящийся к ffmpeg:
#Use ffmpeg to encode mpeg movies in realtime (default: off)
ffmpeg_cap_new on
#Use ffmpeg to make movies with only the pixels moving
#object (green ghost images) (default: off)
ffmpeg_cap_motion off
#Use ffmpeg to encode a timelapse movie
#Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0
#The file rollover mode of the timelapse video
#Valid values: hourly, daily (default), weekly-sunday, weekly-monday,
monthly, manual
ffmpeg_timelapse_mode daily
#Bitrate to be used by the ffmpeg encoder (default: 400000)
#This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 500000
#Enables and defines variable bitrate for the ffmpeg encoder.
#ffmpeg_bps is ignored if variable bitrate is enabled.
#Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
#or the range 2 - 31 where 2 means best quality and 31 is worst.
ffmpeg_variable_bitrate 0
#Codec to used by ffmpeg for the video compression.
#Timelapse mpegs are always made in mpeg1 format independent from this
option.
#Supported formats are: mpeg1 (default), mpeg4, and msmpeg4.
#mpeg1 gives you files with extension .mpg
#mpeg4 or msmpeg4 give you files with extension .avi
#msmpeg4 is recommended for use with Windows Media Player because
#it requires no installation of codec on the Windows client.
ffmpeg_video_codec msmpeg4
Файл avi создается, но его не прочитать :(
Запускаю ffplay -stats /var/tmp/cam0/01-20041004102112.avi
В ответ вот что:
Input #0, avi, from '/var/tmp/cam0/01-20041004102112.avi':
Duration: 00:00:00.0, bitrate: -2147483 kb/s
Stream #0.0: Video: msmpeg4v2, 768x576, 2.00 fps
10.94 A-V: 0.000 aq= 0KB vq= 0KB
какой то не понятный битрейт, да и fps.
Может есть идеи как побороть ?
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [sisyphus] motion + FFmpeg
2004-10-05 6:29 [sisyphus] motion + FFmpeg Alexander Markelov
@ 2004-10-05 6:56 ` Yury Kashtanov
2004-10-05 7:18 ` Alexander Markelov
0 siblings, 1 reply; 5+ messages in thread
From: Yury Kashtanov @ 2004-10-05 6:56 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
On Tue, 05 Oct 2004 10:29:46 +0400
Alexander Markelov <ml@13.net.ru> wrote:
> #Codec to used by ffmpeg for the video compression.
> #Timelapse mpegs are always made in mpeg1 format independent from this
> #
> option.
> #Supported formats are: mpeg1 (default), mpeg4, and msmpeg4.
> #mpeg1 gives you files with extension .mpg
> #mpeg4 or msmpeg4 give you files with extension .avi
> #msmpeg4 is recommended for use with Windows Media Player because
> #it requires no installation of codec on the Windows client.
> ffmpeg_video_codec msmpeg4
>
> Файл avi создается, но его не прочитать :(
> Запускаю ffplay -stats /var/tmp/cam0/01-20041004102112.avi
> В ответ вот что:
> Input #0, avi, from '/var/tmp/cam0/01-20041004102112.avi':
> Duration: 00:00:00.0, bitrate: -2147483 kb/s
> Stream #0.0: Video: msmpeg4v2, 768x576, 2.00 fps
> 10.94 A-V: 0.000 aq= 0KB vq= 0KB
> какой то не понятный битрейт, да и fps.
> Может есть идеи как побороть ?
у меня со строчкой
ffmpeg_video_codec mpeg4
все работает
ffplay -stats 20041005-114546.avi
Input #0, avi, from '20041005-114546.avi':
Duration: 00:00:23.1, bitrate: 433 kb/s
Stream #0.0: Video: mpeg4, 320x240, 8.00 fps
55.83 A-V: 0.000 aq= 0KB vq= 0KB
~~~~~~~~~
Yury Kashtanov
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [sisyphus] motion + FFmpeg
2004-10-05 6:56 ` Yury Kashtanov
@ 2004-10-05 7:18 ` Alexander Markelov
2004-10-05 8:24 ` Yury Kashtanov
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Markelov @ 2004-10-05 7:18 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
Yury Kashtanov пишет:
>On Tue, 05 Oct 2004 10:29:46 +0400
>Alexander Markelov <ml@13.net.ru> wrote:
>
>
>
>>#Codec to used by ffmpeg for the video compression.
>>#Timelapse mpegs are always made in mpeg1 format independent from this
>>#
>>option.
>>#Supported formats are: mpeg1 (default), mpeg4, and msmpeg4.
>>#mpeg1 gives you files with extension .mpg
>>#mpeg4 or msmpeg4 give you files with extension .avi
>>#msmpeg4 is recommended for use with Windows Media Player because
>>#it requires no installation of codec on the Windows client.
>>ffmpeg_video_codec msmpeg4
>>
>>Файл avi создается, но его не прочитать :(
>>Запускаю ffplay -stats /var/tmp/cam0/01-20041004102112.avi
>>В ответ вот что:
>>Input #0, avi, from '/var/tmp/cam0/01-20041004102112.avi':
>> Duration: 00:00:00.0, bitrate: -2147483 kb/s
>> Stream #0.0: Video: msmpeg4v2, 768x576, 2.00 fps
>> 10.94 A-V: 0.000 aq= 0KB vq= 0KB
>>какой то не понятный битрейт, да и fps.
>>Может есть идеи как побороть ?
>>
>>
>
>у меня со строчкой
>ffmpeg_video_codec mpeg4
>все работает
>
>ffplay -stats 20041005-114546.avi
>Input #0, avi, from '20041005-114546.avi':
> Duration: 00:00:23.1, bitrate: 433 kb/s
> Stream #0.0: Video: mpeg4, 320x240, 8.00 fps
> 55.83 A-V: 0.000 aq= 0KB vq= 0KB
>
>~~~~~~~~~
>Yury Kashtanov
>
>_______________________________________________
>Sisyphus mailing list
>Sisyphus@altlinux.ru
>https://lists.altlinux.ru/mailman/listinfo/sisyphus
>
>
пробовал в разных вариантах и mpeg4 и mpeg1, когда mpeg1 так вообще
ругается:
[mpeg1video @ 0x5833a8]MPEG1/2 doesnt support 2/1 fps
Segmentation fault
соответственно mpeg4:
ffplay -stats /var/tmp/cam0/01-20041005111449.avi
Input #0, avi, from '/var/tmp/cam0/01-20041005111449.avi':
Duration: 00:00:00.0, bitrate: -2147483 kb/s
Stream #0.0: Video: mpeg4, 352x288, 2.00 fps
6.77 A-V: 0.000 aq= 0KB vq= 0KB
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [sisyphus] motion + FFmpeg
2004-10-05 7:18 ` Alexander Markelov
@ 2004-10-05 8:24 ` Yury Kashtanov
2004-10-05 8:32 ` Alexander Markelov
0 siblings, 1 reply; 5+ messages in thread
From: Yury Kashtanov @ 2004-10-05 8:24 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
On Tue, 05 Oct 2004 11:18:49 +0400
Alexander Markelov <ml@13.net.ru> wrote:
> >у меня со строчкой
> >ffmpeg_video_codec mpeg4
> >все работает
> >
> >ffplay -stats 20041005-114546.avi
> >Input #0, avi, from '20041005-114546.avi':
> > Duration: 00:00:23.1, bitrate: 433 kb/s
> > Stream #0.0: Video: mpeg4, 320x240, 8.00 fps
> > 55.83 A-V: 0.000 aq= 0KB vq= 0KB
> >
> >
> пробовал в разных вариантах и mpeg4 и mpeg1, когда mpeg1 так вообще
> ругается:
>
> [mpeg1video @ 0x5833a8]MPEG1/2 doesnt support 2/1 fps
> Segmentation fault
>
> соответственно mpeg4:
>
> ffplay -stats /var/tmp/cam0/01-20041005111449.avi
> Input #0, avi, from '/var/tmp/cam0/01-20041005111449.avi':
> Duration: 00:00:00.0, bitrate: -2147483 kb/s
> Stream #0.0: Video: mpeg4, 352x288, 2.00 fps
> 6.77 A-V: 0.000 aq= 0KB vq= 0KB
>
а какой стоит framerate? (у меня 10)
кажется при низких значениях у него башню сносит.
~~~~~~~~~
Yury Kashtanov
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [sisyphus] motion + FFmpeg
2004-10-05 8:24 ` Yury Kashtanov
@ 2004-10-05 8:32 ` Alexander Markelov
0 siblings, 0 replies; 5+ messages in thread
From: Alexander Markelov @ 2004-10-05 8:32 UTC (permalink / raw)
To: ALT Linux Sisyphus discussion list
Yury Kashtanov пишет:
>On Tue, 05 Oct 2004 11:18:49 +0400
>Alexander Markelov <ml@13.net.ru> wrote:
>
>
>
>>>у меня со строчкой
>>>ffmpeg_video_codec mpeg4
>>>все работает
>>>
>>>ffplay -stats 20041005-114546.avi
>>>Input #0, avi, from '20041005-114546.avi':
>>> Duration: 00:00:23.1, bitrate: 433 kb/s
>>> Stream #0.0: Video: mpeg4, 320x240, 8.00 fps
>>> 55.83 A-V: 0.000 aq= 0KB vq= 0KB
>>>
>>>
>>>
>>>
>>пробовал в разных вариантах и mpeg4 и mpeg1, когда mpeg1 так вообще
>>ругается:
>>
>>[mpeg1video @ 0x5833a8]MPEG1/2 doesnt support 2/1 fps
>>Segmentation fault
>>
>>соответственно mpeg4:
>>
>>ffplay -stats /var/tmp/cam0/01-20041005111449.avi
>>Input #0, avi, from '/var/tmp/cam0/01-20041005111449.avi':
>> Duration: 00:00:00.0, bitrate: -2147483 kb/s
>> Stream #0.0: Video: mpeg4, 352x288, 2.00 fps
>> 6.77 A-V: 0.000 aq= 0KB vq= 0KB
>>
>>
>>
>а какой стоит framerate? (у меня 10)
>кажется при низких значениях у него башню сносит.
>
>~~~~~~~~~
>Yury Kashtanov
>
>_______________________________________________
>Sisyphus mailing list
>Sisyphus@altlinux.ru
>https://lists.altlinux.ru/mailman/listinfo/sisyphus
>
>
стоял 2 потом поменял на 100 (без лимита мол)
попробовал сейчас поставить 10 + mpeg4 формат, без изменений. :(
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-10-05 8:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-10-05 6:29 [sisyphus] motion + FFmpeg Alexander Markelov
2004-10-05 6:56 ` Yury Kashtanov
2004-10-05 7:18 ` Alexander Markelov
2004-10-05 8:24 ` Yury Kashtanov
2004-10-05 8:32 ` Alexander Markelov
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git