* [sisyphus] nvidia problems!
@ 2004-09-24 8:56 Dmitry Rusetsky
2004-09-24 10:18 ` [sisyphus] nvidia problems! Снято! Dmitry Rusetsky
0 siblings, 1 reply; 2+ messages in thread
From: Dmitry Rusetsky @ 2004-09-24 8:56 UTC (permalink / raw)
To: Sisyphus List
[-- Attachment #1: Type: text/plain, Size: 1553 bytes --]
Добрый всем день!
поставил вчера ядро 2.6.8-std26-smp-alt9
доставил kernel-modules-nvidia-std26-smp#1.0.6111-alt2.9
но при загрузке modula nvidia.ko
вываливается:
-----------------------------------------------------------
Linux agpgart interface v0.100 (c) Dave Jones
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
00000000
*pde = 375c1001
Oops: 0000 [#1]
SMP
Modules linked in: nvidia nvidia_agp agpgart parport_pc lp parport
uhci_hcd ehci_hcd usbcore nls_cp866 nls_koi8_r ncpfs tg3 tsdev joydev
evdev psmouse rtc ext3 jbd aic79xx sd_mod scsi_mod
CPU: 1
EIP: 0060:[<00000000>] Tainted: PF
EFLAGS: 00010202 (2.6.8-std26-smp-alt9)
EIP is at 0x0
eax: 00000000 ebx: c02e3c20 ecx: c02e3c20 edx: 00000000
esi: f8e05780 edi: c02e3c04 ebp: c02e3c04 esp: f74dbfac
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2425, threadinfo=f74da000 task=f74d4130)
Stack: c0133e27 40149008 080f01f8 08074909 f74da000 c0105e17 40149008
00242a7b
080f01f8 080f01f8 08074909 bfffa1d8 00000080 0000007b 0000007b
00000080
400eb05d 00000073 00000246 bfffa1a0 0000007b
Call Trace:
[<c0133e27>] sys_init_module+0xe7/0x1e0
[<c0105e17>] syscall_call+0x7/0xb
Code: Bad EIP value.
---------------------------------------------------
Может кто-то с этим сталкивался?
полный dmesg прилагается.
--
С Уважением Русецкий Дмитрий.
[-- Attachment #2: dmesg-error.nvidia --]
[-- Type: text/plain, Size: 15347 bytes --]
dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=268-std26-smp-9 ro root=801
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 3057.329 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2075120k/2097116k available (1654k kernel code, 20900k reserved, 862k data, 196k init, 1179612k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6062.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
per-CPU timeslice cutoff: 1462.68 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6094.84 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Total of 2 processors activated (12156.92 BogoMIPS).
WARNING: 1 siblings found for CPU0, should be 2
WARNING: 1 siblings found for CPU1, should be 2
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3056.0238 MHz.
..... host bus clock speed is 132.0879 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0: online
domain 0: span 03
groups: 01 02
CPU1: online
domain 0: span 03
groups: 02 01
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 290k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.20 entry at 0xecdfa, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7f90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6a78, dseg 0xf0000
pnp: 00:12: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:12: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:13: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:13: ioport range 0xf820-0xf83f could not be reserved
pnp: 00:13: ioport range 0xf840-0xf85f has been reserved
pnp: 00:13: ioport range 0xf860-0xf87f has been reserved
pnp: 00:13: ioport range 0xfa00-0xfa1f has been reserved
pnp: 00:13: ioport range 0xfa20-0xfa3f has been reserved
pnp: 00:13: ioport range 0x400-0x41f has been reserved
pnp: 00:13: ioport range 0x420-0x43f has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:05:02.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:05:0c.1[B] -> GSI 22 (level, low) -> IRQ 22
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 C9
12 003 03 1 1 0 1 0 1 1 C1
13 003 03 1 1 0 1 0 1 1 B1
14 000 00 1 0 0 0 0 0 0 00
15 003 03 1 1 0 1 0 1 1 D1
16 003 03 1 1 0 1 0 1 1 D9
17 003 03 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
vesafb: probe of vesafb0 failed with error -6
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1096025057.4294966354:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide1 at 0x170-0x177,0x376 on irq 15
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 HUB COM1 COM2 USB1 USB2 USB3 EUSB PBTN
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
SCSI subsystem initialized
ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:05:0c.1[B] -> GSI 22 (level, low) -> IRQ 22
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
Vendor: SEAGATE Model: ST336607LW Rev: HPS4
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST336607LW Rev: HPS4
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
VFS: Busy inodes after unmount. Self-destruct in 5 seconds. Have a nice day...
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 196k freed
Executing init=/sbin/init
Real Time Clock Driver v1.12
Adding 297128k swap on /dev/sda5. Priority:-1 extents:1
EXT3 FS on sda1, internal journal
alps.c: E6 report: 1a 03 3c
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.100 (c) Dave Jones
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.8 (July 14, 2004)
ACPI: PCI interrupt 0000:05:02.0[A] -> GSI 21 (level, low) -> IRQ 21
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:9d:57:8a:b6
eth0: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem f8831000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 00002440
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 00002460
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
parport0: Printer, Hewlett-Packard HP LaserJet 1200
lp0: using parport0 (interrupt-driven).
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
Linux agpgart interface v0.100 (c) Dave Jones
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
00000000
*pde = 375c1001
Oops: 0000 [#1]
SMP
Modules linked in: nvidia nvidia_agp agpgart parport_pc lp parport uhci_hcd ehci_hcd usbcore nls_cp866 nls_koi8_r ncpfs tg3 tsdev joydev evdev psmouse rtc ext3 jbd aic79xx sd_mod scsi_mod
CPU: 1
EIP: 0060:[<00000000>] Tainted: PF
EFLAGS: 00010202 (2.6.8-std26-smp-alt9)
EIP is at 0x0
eax: 00000000 ebx: c02e3c20 ecx: c02e3c20 edx: 00000000
esi: f8e05780 edi: c02e3c04 ebp: c02e3c04 esp: f74dbfac
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2425, threadinfo=f74da000 task=f74d4130)
Stack: c0133e27 40149008 080f01f8 08074909 f74da000 c0105e17 40149008 00242a7b
080f01f8 080f01f8 08074909 bfffa1d8 00000080 0000007b 0000007b 00000080
400eb05d 00000073 00000246 bfffa1a0 0000007b
Call Trace:
[<c0133e27>] sys_init_module+0xe7/0x1e0
[<c0105e17>] syscall_call+0x7/0xb
Code: Bad EIP value.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [sisyphus] nvidia problems! Снято!
2004-09-24 8:56 [sisyphus] nvidia problems! Dmitry Rusetsky
@ 2004-09-24 10:18 ` Dmitry Rusetsky
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Rusetsky @ 2004-09-24 10:18 UTC (permalink / raw)
To: dimania, ALT Linux Sisyphus discussion list
Вопрос снят!
не соотвевтсвие glx - modules
--
С Уважением Русецкий Дмитрий.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-09-24 10:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-09-24 8:56 [sisyphus] nvidia problems! Dmitry Rusetsky
2004-09-24 10:18 ` [sisyphus] nvidia problems! Снято! Dmitry Rusetsky
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git