[sisyphus] Монтировани CD-приводов

[Petrichev Roman <petrichev@orel.mts.ru>]

[-- Attachment #1: Type: text/plain, Size: 790 bytes --]

Пару дней назад задавал вопрос про монтирование сидюков в Alt Linux 
Compact 2.3. Ситуация так и не прояснилась.
В общем, имеем следующее:
2 CD-привода - Combo-привод-hdc, CD-Rom-hdd.
Эмуляция scsi включена для резака, след-но он работает как /dev/scd0, и 
  диски монтируются нормально. А вот второй привод не работает никак. Ни 
на /dev/hdd, ни на /dev/scd1 не откликается. Под виндой на этой же тачке 
все прекрасно работает. Скажу больше, на снесенном недавно дистре Linux 
другой фирмы тоже все работало. Чувствую, решение совершенно банальное, 
но никак не могу допереть.
Приложил вывод:
ls -l /dev/cdr*
,
ls -l /dev/scd*
,dmesg, а также
fstab и modules.conf.

Кто хорошо разбирается, посмотрите, пожалуйста dmesg - по моему там 
много того, чего не должно быть.


[-- Attachment #2: scsi.txt --]
[-- Type: text/plain, Size: 456 bytes --]

brw-rw----  1 root cdwriter 11, 0 Jan 23 20:55 /dev/scd0
brw-rw----  1 root cdwriter 11, 1 Jan 23 20:55 /dev/scd1
brw-rw----  1 root cdwriter 11, 2 Jan 23 20:55 /dev/scd2
brw-rw----  1 root cdwriter 11, 3 Jan 23 20:55 /dev/scd3
brw-rw----  1 root cdwriter 11, 4 Jan 23 20:55 /dev/scd4
brw-rw----  1 root cdwriter 11, 5 Jan 23 20:55 /dev/scd5
brw-rw----  1 root cdwriter 11, 6 Jan 23 20:55 /dev/scd6
brw-rw----  1 root cdwriter 11, 7 Jan 23 20:55 /dev/scd7

[-- Attachment #3: cdroms.txt --]
[-- Type: text/plain, Size: 190 bytes --]

lrwxrwxrwx  1 root root 9 Mar 27 03:19 /dev/cdrom -> /dev/scd0
lrwxrwxrwx  1 root root 9 Mar 31 19:09 /dev/cdrom1 -> /dev/scd1
lrwxrwxrwx  1 root root 8 Mar 31 19:11 /dev/cdrom2 -> /dev/hdd

[-- Attachment #4: dmesg.txt --]
[-- Type: text/plain, Size: 15277 bytes --]

00000017ff0000 (usable)
 BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
 BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000f5730
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
DMI 2.2 present.
45 structures occupying 1196 bytes.
DMI table at 0x000F0800.
BIOS Vendor: Phoenix Technologies, LTD
BIOS Version: 6.00 PG
BIOS Release: 10/10/2003
System Vendor: VIA Technologies, Inc.
Product Name: KT333-8235
Version:  
Serial Number:  
Board Vendor: http://www.abit.com.tw/
Board Name: KD7-E(VIA KT333-8235)
Board Version: 1.x
ACPI: RSDP (v000 KT400                                     ) @ 0x000f7200
ACPI: RSDT (v001 KT400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000
ACPI: FADT (v001 KT400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040
ACPI: MADT (v001 KT400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff6e00
ACPI: DSDT (v001 KT400  AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI BALANCE SET
Using ACPI (MADT) for SMP configuration information
Kernel command line: root=/dev/hda5  vga=788
Initializing CPU#0
Detected 1406.039 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2804.94 BogoMIPS
Memory: 385808k/393152k available (1193k kernel code, 6956k reserved, 502k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon XP (Palomino) stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1406.0478 MHz.
..... host bus clock speed is 267.8187 MHz.
cpu: 0, clocks: 2678187, slice: 1339093
CPU0<T0:2678176,T1:1339072,D:11,S:1339093,C:2678187>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040116
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20)
ACPI: PCI Interrupt Link [ALKB] (IRQs 21)
ACPI: PCI Interrupt Link [ALKC] (IRQs 22)
ACPI: PCI Interrupt Link [ALKD] (IRQs 23)
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:08[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:08[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
00:00:08[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
00:00:08[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-16 already programmed
Pin 2-19 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
_CRS returns NULL! Using IRQ 21 fordevice (PCI Interrupt Link [ALKB]).
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1)
00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
_CRS returns NULL! Using IRQ 20 fordevice (PCI Interrupt Link [ALKA]).
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1)
00:00:11[A] -> 2-20 -> IRQ 20
Pin 2-21 already programmed
_CRS returns NULL! Using IRQ 22 fordevice (PCI Interrupt Link [ALKC]).
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:11[C] -> 2-22 -> IRQ 22
_CRS returns NULL! Using IRQ 23 fordevice (PCI Interrupt Link [ALKD]).
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:11[D] -> 2-23 -> IRQ 23
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-23 already programmed
Pin 2-23 already programmed
Pin 2-23 already programmed
Pin 2-23 already programmed
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    A9
 11 001 01  1    1    0   1   0    1    1    B1
 12 001 01  1    1    0   1   0    1    1    B9
 13 001 01  1    1    0   1   0    1    1    C1
 14 001 01  1    1    0   1   0    1    1    D1
 15 001 01  1    1    0   1   0    1    1    C9
 16 001 01  1    1    0   1   0    1    1    D9
 17 001 01  1    1    0   1   0    1    1    E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Via IRQ fixup for 00:10.0, from 11 to 5
PCI: Via IRQ fixup for 00:10.1, from 11 to 5
PCI: Via IRQ fixup for 00:10.2, from 10 to 5
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd8000000, mapped to 0xd880b000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:c1a0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... no good signature found.
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xec00-0xec07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xec08-0xec0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
blk: queue c02f8860, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
hdd: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10637/240/63, UDMA(100)
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 185k freed
VFS: Mounted root (romfs filesystem) readonly.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 132k freed
Executing init=/sbin/init
Adding Swap: 514040k swap-space (priority -1)
Real Time Clock Driver v1.10e
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST  Model: RW/DVD GCC-4480B  Rev: 1.02
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: ASUS      Model: CD-S520/A         Rev: 1.4K
  Type:   CD-ROM                             ANSI SCSI revision: 02
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
NTFS driver 2.1.4b [Flags: R/O MODULE].
NTFS-fs warning (device 03:03): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 23:06:28 Feb  4 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 21, pci mem d8c4d000
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
inserting floppy driver for 2.4.22-std-up-alt17
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (800x600, 10445 bytes, v2).
Splash status on console 11 changed to on

[-- Attachment #5: fstab --]
[-- Type: text/plain, Size: 740 bytes --]

/dev/hda5 / reiserfs notail 1 1
devpts /dev/pts devpts gid=5,mode=0620 0 0
/dev/cdrom /mnt/cdrom auto user,iocharset=koi8-r,noauto,ro,exec 0 0
/dev/cdrom2 /mnt/cdrom2 auto user,iocharset=koi8-r,noauto,ro,exec 0 0
/dev/hda6 /mnt/data vfat iocharset=koi8-r,quiet,codepage=866,umask=0 0 0
/dev/floppy /mnt/floppy auto user,iocharset=koi8-r,quiet,sync,codepage=866,noauto,umask=0,exec 0 0
/dev/hda2 /mnt/lfs reiserfs notail 1 2
/dev/hda3 /mnt/xp ntfs iocharset=koi8-r 0 0
proc /proc proc gid=19 0 0
/dev/hda1 swap swap defaults 0 0
##/dev/cdrom1             /mnt/cdrom1             udf,iso9660 noauto,user,kudzu,noexec,nodev,nosuid,ro 0 0
/dev/cdrom1             /mnt/cdrom1             udf,iso9660 noauto,user,kudzu,noexec,nodev,nosuid,ro 0 0

[-- Attachment #6: modules.conf --]
[-- Type: text/plain, Size: 384 bytes --]

# Local configuration goes here.
# To inspect package defined part, see also /etc/modutils.d/

options ide-scsi units=/dev/hdc
above snd-emu10k1 snd-pcm-oss
alias sound-slot-0 snd-emu10k1
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
probeall scsi_hostadapter ide-scsi
above snd-pcm-oss snd-mixer-oss
alias usb-interface usb-uhci
alias usb-interface1 ehci-hcd