* [sisyphus] Quake3 1.32 -- мышь сдохла :-(
@ 2003-12-01 19:03 Canis Cerberus
2003-12-01 8:58 ` Dmitry Gerasimov
0 siblings, 1 reply; 2+ messages in thread
From: Canis Cerberus @ 2003-12-01 19:03 UTC (permalink / raw)
To: ALT Linux Community; +Cc: ALT Linux Sisyphus
[-- Attachment #1: Type: text/plain, Size: 590 bytes --]
Првет всем !!!
Logitech USB Optical, после очередного обновления перестала работать в Quake3
1.32
Симптомы: после запуска кваки курсор висит в левом верхнем углу и не двигается
*-(
Подскажите, пжалуйста, что делать! Вот как квака работает с мышью я совсем не
представляю :-|
Может проблема в конфигурации ИКСов (см. конфиг во вложенном файле);
наверняка ведь кто-нибудь сталкивался с этой проблемой; откликнитесь что-ли !
С уважением
--
Canis Cerberus
Magna est veritas et praevalebit !
A1000/KT333/256DDR/MatroxG450/Barracuda80Gb/Teac552/SBLive!/SJ3500c/DJ3820/SL45i
Санкт-Петербург
[-- Attachment #2: XF86Config --]
[-- Type: text/plain, Size: 8595 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbVariant" ",winkeys"
Option "XkbLayout" "us,ru"
# Option "XkbOptions" "grp:caps_toggle"
Option "XkbOptions" "grp:caps_toggle,grp:rwin_switch,grp_led:scroll"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
#Section "InputDevice"
#
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "PS/2"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
#EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "CTX|CTX PR711F series"
VendorName "CTX"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30.0-95.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50.0-160.0
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "monitor2"
VendorName "CTX"
ModelName "Unknown"
HorizSync 30.0-95.0
VertRefresh 50.0-160.0
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "Matrox Millennium G450 DualHead 1"
VendorName ""
BoardName ""
Driver "mga"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "DPMS" "on"
Screen 0
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Matrox Millennium G450 DualHead 2"
VendorName ""
BoardName ""
Driver "mga"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "DPMS" "on"
Screen 1
BusID "PCI:1:0:0"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "Matrox Millennium G450 DualHead 1"
Monitor "CTX|CTX PR711F series"
DefaultFbBpp 32
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "screen2"
Device "Matrox Millennium G450 DualHead 2"
Monitor "monitor2"
DefaultFbBpp 32
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
Screen "screen2" RightOf "screen1"
# Option "Xinerama" "on"
InputDevice "Mouse1" "CorePointer"
# InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [sisyphus] Quake3 1.32 -- мышь сдохла :-(
2003-12-01 19:03 [sisyphus] Quake3 1.32 -- мышь сдохла :-( Canis Cerberus
@ 2003-12-01 8:58 ` Dmitry Gerasimov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Gerasimov @ 2003-12-01 8:58 UTC (permalink / raw)
To: sisyphus
Canis Cerberus wrote:
>Првет всем !!!
>
>Logitech USB Optical, после очередного обновления перестала работать в Quake3
>1.32
>Симптомы: после запуска кваки курсор висит в левом верхнем углу и не двигается
>*-(
>Подскажите, пжалуйста, что делать! Вот как квака работает с мышью я совсем не
>представляю :-|
>Может проблема в конфигурации ИКСов (см. конфиг во вложенном файле);
>наверняка ведь кто-нибудь сталкивался с этой проблемой; откликнитесь что-ли !
>
>
обновить кваку до самого последнего патча. версия, по моему 1.32b
>С уважением
>
>
>------------------------------------------------------------------------
>
>
># File generated by XFdrake.
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of
># this file.
># **********************************************************************
>
>Section "Files"
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, Mandrake 6.0 and later now use a font server independent of
># the X server to render fonts.
>
> FontPath "unix/:-1"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a signal is
> # received. This may leave the console in an unusable state, but may
> # provide a better stack trace in the core dump to aid in debugging
> #NoTrapSignals
>
> # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
> # This allows clients to receive this key event.
> #DontZap
>
> # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
> # sequences. This allows clients to receive these key events.
> #DontZoom
>
> # This allows the server to start up even if the
> # mouse device can't be opened/initialised.
> AllowMouseOpenFail
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "AutoRepeat" "250 30"
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbVariant" ",winkeys"
> Option "XkbLayout" "us,ru"
># Option "XkbOptions" "grp:caps_toggle"
> Option "XkbOptions" "grp:caps_toggle,grp:rwin_switch,grp_led:scroll"
>
>EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>Section "InputDevice"
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
># Option "ChordMiddle"
>
>EndSection
>
>
>#Section "InputDevice"
>#
># Identifier "Mouse2"
># Driver "mouse"
># Option "Protocol" "PS/2"
># Option "Device" "/dev/psaux"
># Option "Emulate3Buttons"
># Option "Emulate3Timeout" "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
># Option "ChordMiddle"
>
>#EndSection
>
>
>
>Section "Module"
>
># This loads the DBE extension module.
>
> Load "dbe"
>
># This loads the Video for Linux module.
> Load "v4l"
>
> Load "glx"
> Load "dri"
>
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
> SubSection "extmod"
> #Option "omit xfree86-dga"
>
> EndSubSection
>
># This loads the Type1 and FreeType font modules
>
> Load "type1"
> Load "freetype"
>EndSection
>
>
>Section "DRI"
> Mode 0666
>EndSection
>
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
> Identifier "CTX|CTX PR711F series"
> VendorName "CTX"
> ModelName "Unknown"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
> HorizSync 30.0-95.0
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
> VertRefresh 50.0-160.0
>
>
># This is a set of extended mode timings typically used for laptop,
># TV fullscreen mode or DVD fullscreen output.
># These are available along with standard mode timings.
>
># Sony Vaio C1(X,XS,VE,VN)?
># 1024x480 @ 85.6 Hz, 48 kHz hsync
>ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
>
># 768x576 @ 79 Hz, 50 kHz hsync
>ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
># 768x576 @ 100 Hz, 61.6 kHz hsync
>ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
>
>
>EndSection
>
>
>Section "Monitor"
> Identifier "monitor2"
> VendorName "CTX"
> ModelName "Unknown"
>
> HorizSync 30.0-95.0
> VertRefresh 50.0-160.0
>EndSection
>
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
> Identifier "Generic VGA"
> Driver "vga"
>EndSection
>
>Section "Device"
> Identifier "Matrox Millennium G450 DualHead 1"
> VendorName ""
> BoardName ""
> Driver "mga"
> # Clock lines
>
>
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
>
> Option "AGPMode" "1"
> Option "DPMS" "on"
> Screen 0
> BusID "PCI:1:0:0"
>EndSection
>
>
>Section "Device"
> Identifier "Matrox Millennium G450 DualHead 2"
> VendorName ""
> BoardName ""
> Driver "mga"
> # Clock lines
>
>
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
>
> Option "AGPMode" "1"
> Option "DPMS" "on"
> Screen 1
> BusID "PCI:1:0:0"
>EndSection
>
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
>
>Section "Screen"
> Identifier "screen1"
> Device "Matrox Millennium G450 DualHead 1"
> Monitor "CTX|CTX PR711F series"
> DefaultFbBpp 32
> DefaultColorDepth 24
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 15
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 32
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
>EndSection
>
>Section "Screen"
> Identifier "screen2"
> Device "Matrox Millennium G450 DualHead 2"
> Monitor "monitor2"
> DefaultFbBpp 32
> DefaultColorDepth 24
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 15
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 32
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
>EndSection
>
>
>Section "ServerLayout"
> Identifier "layout1"
> Screen "screen1"
> Screen "screen2" RightOf "screen1"
># Option "Xinerama" "on"
>
> InputDevice "Mouse1" "CorePointer"
>
># InputDevice "Mouse2" "SendCoreEvents"
>
> InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Sisyphus mailing list
>Sisyphus@altlinux.ru
>http://altlinux.ru/mailman/listinfo/sisyphus
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-12-01 19:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-01 19:03 [sisyphus] Quake3 1.32 -- мышь сдохла :-( Canis Cerberus
2003-12-01 8:58 ` Dmitry Gerasimov
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git