Re: [sisyphus] Quake3 1.32 -- мышь сдохла :-(

[Dmitry Gerasimov <dima@polarcup.ru>]

Canis Cerberus wrote:

>Првет всем !!!
>
>Logitech USB Optical, после очередного обновления перестала работать в Quake3 
>1.32
>Симптомы: после запуска кваки курсор висит в левом верхнем углу и не двигается 
>*-(
>Подскажите, пжалуйста, что делать! Вот как квака работает с мышью я совсем не 
>представляю :-|
>Может проблема в конфигурации ИКСов (см. конфиг во вложенном файле);
>наверняка ведь кто-нибудь сталкивался с этой проблемой; откликнитесь что-ли !
>  
>
обновить кваку до самого последнего патча. версия, по моему 1.32b

>С уважением
>  
>
>------------------------------------------------------------------------
>
>
># File generated by XFdrake.
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of
># this file.
># **********************************************************************
>
>Section "Files"
>
>    RgbPath	"/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, Mandrake 6.0 and later now use a font server independent of
># the X server to render fonts.
>
>    FontPath   "unix/:-1"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
>    # Uncomment this to cause a core dump at the spot where a signal is
>    # received.  This may leave the console in an unusable state, but may
>    # provide a better stack trace in the core dump to aid in debugging
>    #NoTrapSignals
>
>    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>    # This allows clients to receive this key event.
>    #DontZap
>
>    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>    # sequences.  This allows clients to receive these key events.
>    #DontZoom
>
>    # This  allows  the  server  to start up even if the
>    # mouse device can't be opened/initialised.
>    AllowMouseOpenFail
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier "Keyboard1"
>    Driver      "Keyboard"
>    Option "AutoRepeat"  "250 30"
>
>    Option "XkbRules"	"xfree86"
>    Option "XkbModel"	"pc105"
>    Option "XkbVariant"	",winkeys"
>    Option "XkbLayout"	"us,ru"
>#    Option "XkbOptions"	"grp:caps_toggle"
>    Option "XkbOptions" "grp:caps_toggle,grp:rwin_switch,grp_led:scroll"
>
>EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier  "Mouse1"
>    Driver      "mouse"
>    Option "Protocol"    "IMPS/2"
>    Option "Device"      "/dev/mouse"
>    Option "ZAxisMapping" "4 5"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    Option "ChordMiddle"
>
>EndSection
>
>
>#Section "InputDevice"
>#
>#    Identifier  "Mouse2"
>#    Driver      "mouse"
>#    Option "Protocol"    "PS/2"
>#    Option "Device"      "/dev/psaux"
>#    Option "Emulate3Buttons"
>#    Option "Emulate3Timeout"    "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    Option "ChordMiddle"
>
>#EndSection
>
>
>
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load	"dbe"
>
># This loads the Video for Linux module.
>    Load        "v4l"
>
>    Load	"glx"
>    Load	"dri"
>
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
>    SubSection	"extmod"
>	#Option	"omit xfree86-dga"
>
>    EndSubSection
>
># This loads the Type1 and FreeType font modules
>
>    Load	"type1"
>    Load	"freetype"
>EndSection
>
>
>Section "DRI"
>    Mode	0666
>EndSection
>
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>    Identifier "CTX|CTX PR711F series"
>    VendorName "CTX"
>    ModelName  "Unknown"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    HorizSync  30.0-95.0
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    VertRefresh 50.0-160.0
>
>
># This is a set of extended mode timings typically used for laptop,
># TV fullscreen mode or DVD fullscreen output.
># These are available along with standard mode timings.
>
># Sony Vaio C1(X,XS,VE,VN)?
># 1024x480 @ 85.6 Hz, 48 kHz hsync
>ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
>
># 768x576 @ 79 Hz, 50 kHz hsync
>ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
># 768x576 @ 100 Hz, 61.6 kHz hsync
>ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
>
>
>EndSection
>
>
>Section "Monitor"
>    Identifier "monitor2"
>    VendorName "CTX"
>    ModelName  "Unknown"
>
>    HorizSync   30.0-95.0
>    VertRefresh 50.0-160.0
>EndSection
>
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
>    Identifier "Generic VGA"
>    Driver     "vga"
>EndSection
>
>Section "Device"
>    Identifier  "Matrox Millennium G450 DualHead 1"
>    VendorName  ""
>    BoardName   ""
>    Driver      "mga"
>    # Clock lines
>
>
>    # Uncomment following option if you see a big white block        
>    # instead of the cursor!                                          
>    #    Option      "sw_cursor"
>
>    Option      "AGPMode"  "1"
>    Option      "DPMS"  "on"
>    Screen 0
>    BusID       "PCI:1:0:0"
>EndSection
>
>
>Section "Device"
>    Identifier  "Matrox Millennium G450 DualHead 2"
>    VendorName  ""
>    BoardName   ""
>    Driver      "mga"
>    # Clock lines
>
>
>    # Uncomment following option if you see a big white block        
>    # instead of the cursor!                                          
>    #    Option      "sw_cursor"
>
>    Option      "AGPMode"  "1"
>    Option      "DPMS"  "on"
>    Screen 1
>    BusID       "PCI:1:0:0"
>EndSection
>
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
>
>Section "Screen"
>    Identifier "screen1"
>    Device      "Matrox Millennium G450 DualHead 1"
>    Monitor     "CTX|CTX PR711F series"
>    DefaultFbBpp      32
>    DefaultColorDepth 24
>    Subsection "Display"
>        Depth       8
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>Section "Screen"
>    Identifier "screen2"
>    Device      "Matrox Millennium G450 DualHead 2"
>    Monitor     "monitor2"
>    DefaultFbBpp      32
>    DefaultColorDepth 24
>    Subsection "Display"
>        Depth       8
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>
>Section "ServerLayout"
>    Identifier "layout1"
>    Screen     "screen1"
>    Screen     "screen2" RightOf "screen1"
>#    Option     "Xinerama" "on"
>
>    InputDevice "Mouse1" "CorePointer"
>
>#    InputDevice "Mouse2" "SendCoreEvents"
>
>    InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Sisyphus mailing list
>Sisyphus@altlinux.ru
>http://altlinux.ru/mailman/listinfo/sisyphus
>  
>