[sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Maks Re]

Здравствуйте,

подскажите, други...

есть usb-sata переходник для устройств...
втыкаем, и видим картинку как ниже...

вопрос: 
это железка или ядро?



[ 9980.761798]  sdb: sdb1 sdb2 sdb3
[ 9980.763845] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 9980.763849] sd 5:0:0:0: [sdb] Attached SCSI disk
[10461.593453] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[10461.595560] SGI XFS Quota Management subsystem
[10461.842835] EXT2-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended
[10461.844705] XFS (sdb3): Mounting Filesystem
[10462.090330] fuse init (API version 7.16)
[10463.057627] XFS (sdb3): Ending clean mount
[11044.166058] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11054.383112] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11091.142094] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11091.256062] usb 7-2: device descriptor read/64, error -71
[11091.471055] usb 7-2: device descriptor read/64, error -71
[11091.674041] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11091.788030] usb 7-2: device descriptor read/64, error -71
[11092.003044] usb 7-2: device descriptor read/64, error -71
[11092.206094] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11092.615074] usb 7-2: device not accepting address 2, error -71
[11092.717066] usb 7-2: reset high speed USB device number 2 using ehci_hcd
[11093.127102] usb 7-2: device not accepting address 2, error -71
[11093.127168] usb 7-2: USB disconnect, device number 2
[11093.127687] sd 5:0:0:0: Device offlined - not ready after error recovery
[11093.128027] sd 5:0:0:0: [sdb] Unhandled error code
[11093.128030] sd 5:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[11093.128035] sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 13 23 3d b0 00 00 08 00
[11093.128044] end_request: I/O error, dev sdb, sector 321076656
[11093.128425] XFS (sdb3): I/O error occurred: meta-data dev sdb3 block 0xee36e00       ("xfs_trans_read_buf") error 5 buf count 4096
[11093.132765] XFS (sdb3): I/O error occurred: meta-data dev sdb3 block 0xee36e00       ("xfs_trans_read_buf") error 5 buf count 4096
[11093.140048] XFS (sdb3): xfs_do_force_shutdown(0x1) called from line 1032 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xfd6f1a42
[11093.140058] XFS (sdb3): I/O Error Detected. Shutting down filesystem
[11093.140060] XFS (sdb3): Please umount the filesystem and rectify the problem(s)
[11093.140361] EXT2-fs (sdb2): previous I/O error to superblock detected
[11093.140363] 
[11093.140397] EXT2-fs (sdb2): previous I/O error to superblock detected
[11093.140399] 
[11093.155319] EXT2-fs (sdb2): previous I/O error to superblock detected
[11093.155321] 
[11093.155345] BUG: unable to handle kernel paging request at 35408000
[11093.155389] IP: [<c02e892c>] __percpu_counter_add+0x2c/0xe0
[11093.155426] *pde = 00000000 
[11093.155448] Oops: 0000 [#1] PREEMPT SMP 
[11093.155484] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/class
[11093.155519] Modules linked in: fuse ext2 xfs uas usb_storage ppdev parport_pc lp parport aes_i586 aes_generic af_packet autofs4 rfcomm bnep dm_multipath scsi_dh dm_mod usbhid hid uinput btusb bluetooth joydev sr_mod cdrom pata_acpi ata_generic snd_hda_codec_analog pcmcia arc4 ecb firewire_ohci thinkpad_acpi yenta_socket tpm_tis iwl3945 firewire_core pcmcia_rsrc rtc_cmos rtc_core pcmcia_core iwl_legacy rtc_lib wmi sg ehci_hcd battery ac evdev uhci_hcd psmouse hwmon i2c_i801 serio_raw ata_piix mac80211 tpm nvram tpm_bios cfg80211 snd_hda_intel crc_itu_t thermal usbcore processor snd_hda_codec snd_hwdep snd_pcm rfkill e1000e snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 ahci libahci libata drm_kms_helper drm scsi_mod i2c_algo_bit intel_agp intel_gtt button i2c_core agpgart video
[11093.156008] 
[11093.156008] Pid: 13825, comm: umount Not tainted 2.6.39-pure-emerald-alt3 #1 LENOVO 7659W8R/7659W8R
[11093.156008] EIP: 0060:[<c02e892c>] EFLAGS: 00010002 CPU: 1
[11093.156008] EIP is at __percpu_counter_add+0x2c/0xe0
[11093.156008] EAX: 00000000 EBX: f40e44ec ECX: 00000010 EDX: 00000010
[11093.156008] ESI: f6262da0 EDI: f4423f58 EBP: 00000000 ESP: eb6ebebc
[11093.156008]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[11093.156008] Process umount (pid: 13825, ti=eb6ea000 task=f1a2c000 task.ti=eb6ea000)
[11093.156008] Stack:
[11093.156008]  00000001 00000000 f1a2c000 f6262da0 f4423f58 c01c97e2 00000010 f6262da0
[11093.156008]  f4423f48 c022a056 f2f85000 ea4ed400 00000000 eb320188 fd98d202 f2f85000
[11093.156008]  fd991d69 fd9927bc f2f85000 ea4ed400 eec8fbe0 00000000 fd98d2ad f2f85000
[11093.156008] Call Trace:
[11093.156008]  [<c01c97e2>] ? account_page_dirtied+0x62/0x90
[11093.156008]  [<c022a056>] ? __set_page_dirty+0x36/0xb0
[11093.156008]  [<fd98d202>] ? ext2_sync_super+0x72/0xd0 [ext2]
[11093.156008]  [<fd98d2ad>] ? ext2_sync_fs+0x4d/0x70 [ext2]
[11093.156008]  [<c0245f40>] ? dquot_get_dqblk+0x100/0x100
[11093.156008]  [<c02281c2>] ? __sync_filesystem+0x52/0xa0
[11093.156008]  [<c0228241>] ? sync_filesystem+0x21/0x50
[11093.156008]  [<c02049a9>] ? generic_shutdown_super+0x29/0xe0
[11093.156008]  [<c01f761d>] ? kmem_cache_free+0x9d/0x100
[11093.156008]  [<c0204a82>] ? kill_block_super+0x22/0x70
[11093.156008]  [<c0204d25>] ? deactivate_locked_super+0x35/0x60
[11093.156008]  [<c021d52e>] ? sys_umount+0x6e/0x350
[11093.157067]  [<c01522e2>] ? sigprocmask+0x72/0xf0
[11093.157067]  [<c0450ca8>] ? syscall_call+0x7/0xb
[11093.157067] Code: ec 14 89 5c 24 08 89 c3 89 e0 25 00 e0 ff ff 89 74 24 0c 89 7c 24 10 83 40 14 01 89 4c 24 04 8b 4c 24 18 89 14 24 8b 43 14 89 ca 
[11093.157067]  8b 30 89 f7 c1 ff 1f 03 34 24 13 7c 24 04 c1 fa 1f 89 54 24 
[11093.157067] EIP: [<c02e892c>] __percpu_counter_add+0x2c/0xe0 SS:ESP 0068:eb6ebebc
[11093.157067] CR2: 0000000035408000
[11093.157067] BUG: scheduling while atomic: umount/13825/0x00000003
[11093.157067] Modules linked in: fuse ext2 xfs uas usb_storage ppdev parport_pc lp parport aes_i586 aes_generic af_packet autofs4 rfcomm bnep dm_multipath scsi_dh dm_mod usbhid hid uinput btusb bluetooth joydev sr_mod cdrom pata_acpi ata_generic snd_hda_codec_analog pcmcia arc4 ecb firewire_ohci thinkpad_acpi yenta_socket tpm_tis iwl3945 firewire_core pcmcia_rsrc rtc_cmos rtc_core pcmcia_core iwl_legacy rtc_lib wmi sg ehci_hcd battery ac evdev uhci_hcd psmouse hwmon i2c_i801 serio_raw ata_piix mac80211 tpm nvram tpm_bios cfg80211 snd_hda_intel crc_itu_t thermal usbcore processor snd_hda_codec snd_hwdep snd_pcm rfkill e1000e snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 ahci libahci libata drm_kms_helper drm scsi_mod i2c_algo_bit intel_agp intel_gtt button i2c_core agpgart video
[11093.157067] Pid: 13825, comm: umount Not tainted 2.6.39-pure-emerald-alt3 #1
[11093.157067] Call Trace:
[11093.157067]  [<c044e807>] ? schedule+0x607/0x9c0
[11093.157067]  [<c02da9b5>] ? number.clone.1+0x375/0x390
[11093.157067]  [<c044f668>] ? __mutex_lock_slowpath+0xe8/0x170
[11093.157067]  [<c044f4d6>] ? mutex_lock+0x16/0x30
[11093.157067]  [<f83e25c2>] ? intel_pipe_set_base+0x82/0x250 [i915]
[11093.157067]  [<c02dbdbb>] ? snprintf+0x1b/0x20
[11093.157067]  [<f8156f3d>] ? drm_get_connector_name+0x3d/0x50 [drm]
[11093.157067]  [<f80dfa74>] ? drm_crtc_helper_set_config+0x714/0x980 [drm_kms_helper]
[11093.157067]  [<f80dc67a>] ? drm_fb_helper_pan_display+0x6a/0xb0 [drm_kms_helper]
[11093.157067]  [<c02fe6aa>] ? fb_pan_display+0xca/0x160
[11093.157067]  [<c030f0da>] ? bit_update_start+0x1a/0x40
[11093.157067]  [<c030cda7>] ? fbcon_switch+0x427/0x5c0
[11093.157067]  [<c0353023>] ? redraw_screen+0x153/0x240
[11093.157067]  [<c0453a7c>] ? __atomic_notifier_call_chain+0x3c/0x50
[11093.157067]  [<c030c1db>] ? fbcon_blank+0x21b/0x2d0
[11093.157067]  [<c0453aa7>] ? atomic_notifier_call_chain+0x17/0x20
[11093.157067]  [<c0351df6>] ? vt_console_print+0x286/0x370
[11093.157067]  [<c0351b70>] ? notify_update+0x30/0x30
[11093.157067]  [<c01658fb>] ? up+0xb/0x40
[11093.157067]  [<c0142b3c>] ? console_unlock+0x16c/0x1c0
[11093.157067]  [<c014307d>] ? vprintk+0x3bd/0x430
[11093.157067]  [<c01502d6>] ? lock_timer_base.clone.21+0x26/0x50
[11093.157067]  [<c0150927>] ? mod_timer+0x117/0x2a0
[11093.157067]  [<c035409b>] ? do_unblank_screen+0x9b/0x190
[11093.157067]  [<c044df5e>] ? printk+0x17/0x21
[11093.157067]  [<c02de505>] ? bust_spinlocks+0x15/0x40
[11093.157067]  [<c0451ddf>] ? oops_end+0x2f/0xd0
[11093.157067]  [<c01257b0>] ? no_context+0xc0/0x150
[11093.157067]  [<c0453500>] ? spurious_fault+0xd0/0xd0
[11093.157067]  [<c01259af>] ? bad_area_nosemaphore+0xf/0x20
[11093.157067]  [<c0453845>] ? do_page_fault+0x345/0x4e0
[11093.157067]  [<c02dbc92>] ? vsnprintf+0x312/0x3e0
[11093.157067]  [<c01658fb>] ? up+0xb/0x40
[11093.157067]  [<c0142b3c>] ? console_unlock+0x16c/0x1c0
[11093.157067]  [<c0453500>] ? spurious_fault+0xd0/0xd0
[11093.157067]  [<c0451393>] ? error_code+0x67/0x6c
[11093.157067]  [<c013007b>] ? find_lowest_rq+0x2b/0x140
[11093.157067]  [<c02e892c>] ? __percpu_counter_add+0x2c/0xe0
[11093.157067]  [<c01c97e2>] ? account_page_dirtied+0x62/0x90
[11093.157067]  [<c022a056>] ? __set_page_dirty+0x36/0xb0
[11093.157067]  [<fd98d202>] ? ext2_sync_super+0x72/0xd0 [ext2]
[11093.157067]  [<fd98d2ad>] ? ext2_sync_fs+0x4d/0x70 [ext2]
[11093.157067]  [<c0245f40>] ? dquot_get_dqblk+0x100/0x100
[11093.157067]  [<c02281c2>] ? __sync_filesystem+0x52/0xa0
[11093.157067]  [<c0228241>] ? sync_filesystem+0x21/0x50
[11093.157067]  [<c02049a9>] ? generic_shutdown_super+0x29/0xe0
[11093.157067]  [<c01f761d>] ? kmem_cache_free+0x9d/0x100
[11093.157067]  [<c0204a82>] ? kill_block_super+0x22/0x70
[11093.157067]  [<c0204d25>] ? deactivate_locked_super+0x35/0x60
[11093.157067]  [<c021d52e>] ? sys_umount+0x6e/0x350
[11093.157067]  [<c01522e2>] ? sigprocmask+0x72/0xf0
[11093.157067]  [<c0450ca8>] ? syscall_call+0x7/0xb
[11093.261226] ---[ end trace 4cfa930fbdf39b6d ]---
[11093.261231] note: umount[13825] exited with preempt_count 2
[11093.261259] BUG: scheduling while atomic: umount/13825/0x10000003
[11093.261261] Modules linked in: fuse ext2 xfs uas usb_storage ppdev parport_pc lp parport aes_i586 aes_generic af_packet autofs4 rfcomm bnep dm_multipath scsi_dh dm_mod usbhid hid uinput btusb bluetooth joydev sr_mod cdrom pata_acpi ata_generic snd_hda_codec_analog pcmcia arc4 ecb firewire_ohci thinkpad_acpi yenta_socket tpm_tis iwl3945 firewire_core pcmcia_rsrc rtc_cmos rtc_core pcmcia_core iwl_legacy rtc_lib wmi sg ehci_hcd battery ac evdev uhci_hcd psmouse hwmon i2c_i801 serio_raw ata_piix mac80211 tpm nvram tpm_bios cfg80211 snd_hda_intel crc_itu_t thermal usbcore processor snd_hda_codec snd_hwdep snd_pcm rfkill e1000e snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 ahci libahci libata drm_kms_helper drm scsi_mod i2c_algo_bit intel_agp intel_gtt button i2c_core agpgart video
[11093.261344] Pid: 13825, comm: umount Tainted: G      D     2.6.39-pure-emerald-alt3 #1
[11093.261347] Call Trace:
[11093.261356]  [<c044e807>] ? schedule+0x607/0x9c0
[11093.261361]  [<c01c7eca>] ? __pagevec_free+0x3a/0xc0
[11093.261366]  [<c01fdb57>] ? mem_cgroup_del_lru_list+0x27/0xb0
[11093.261370]  [<c01cb381>] ? release_pages+0x1b1/0x1e0
[11093.261373]  [<c01c7eca>] ? __pagevec_free+0x3a/0xc0
[11093.261377]  [<c01fdb57>] ? mem_cgroup_del_lru_list+0x27/0xb0
[11093.261382]  [<c013a443>] ? __cond_resched+0x13/0x30
[11093.261385]  [<c044edc0>] ? _cond_resched+0x20/0x30
[11093.261388]  [<c01df08d>] ? unmap_vmas+0x5ed/0x800
[11093.261393]  [<c01e505c>] ? exit_mmap+0xac/0x190
[11093.261397]  [<c013febb>] ? mmput+0x2b/0xc0
[11093.261400]  [<c0145be7>] ? exit_mm+0x107/0x130
[11093.261405]  [<c0182632>] ? acct_collect+0x82/0x160
[11093.261408]  [<c0145d49>] ? do_exit+0x139/0x7c0
[11093.261412]  [<c0451e3c>] ? oops_end+0x8c/0xd0
[11093.261415]  [<c01257b0>] ? no_context+0xc0/0x150
[11093.261418]  [<c0453500>] ? spurious_fault+0xd0/0xd0
[11093.261421]  [<c01259af>] ? bad_area_nosemaphore+0xf/0x20
[11093.261424]  [<c0453845>] ? do_page_fault+0x345/0x4e0
[11093.261429]  [<c02dbc92>] ? vsnprintf+0x312/0x3e0
[11093.261433]  [<c01658fb>] ? up+0xb/0x40
[11093.261436]  [<c0142b3c>] ? console_unlock+0x16c/0x1c0
[11093.261440]  [<c0453500>] ? spurious_fault+0xd0/0xd0
[11093.261443]  [<c0451393>] ? error_code+0x67/0x6c
[11093.261446]  [<c013007b>] ? find_lowest_rq+0x2b/0x140
[11093.261450]  [<c02e892c>] ? __percpu_counter_add+0x2c/0xe0
[11093.261454]  [<c01c97e2>] ? account_page_dirtied+0x62/0x90
[11093.261458]  [<c022a056>] ? __set_page_dirty+0x36/0xb0
[11093.261464]  [<fd98d202>] ? ext2_sync_super+0x72/0xd0 [ext2]
[11093.261468]  [<fd98d2ad>] ? ext2_sync_fs+0x4d/0x70 [ext2]
[11093.261472]  [<c0245f40>] ? dquot_get_dqblk+0x100/0x100
[11093.261476]  [<c02281c2>] ? __sync_filesystem+0x52/0xa0
[11093.261480]  [<c0228241>] ? sync_filesystem+0x21/0x50
[11093.261484]  [<c02049a9>] ? generic_shutdown_super+0x29/0xe0
[11093.261488]  [<c01f761d>] ? kmem_cache_free+0x9d/0x100
[11093.261492]  [<c0204a82>] ? kill_block_super+0x22/0x70
[11093.261495]  [<c0204d25>] ? deactivate_locked_super+0x35/0x60
[11093.261499]  [<c021d52e>] ? sys_umount+0x6e/0x350
[11093.261503]  [<c01522e2>] ? sigprocmask+0x72/0xf0
[11093.261507]  [<c0450ca8>] ? syscall_call+0x7/0xb
[11093.289038] usb 7-2: new high speed USB device number 3 using ehci_hcd
[11093.403088] usb 7-2: device descriptor read/64, error -71
[11093.472053] XFS (sdb3): xfs_log_force: error 5 returned.
[11093.618105] usb 7-2: device descriptor read/64, error -71
[11093.821098] usb 7-2: new high speed USB device number 4 using ehci_hcd
[11093.935057] usb 7-2: device descriptor read/64, error -71
[11094.150101] usb 7-2: device descriptor read/64, error -71
[11094.353061] usb 7-2: new high speed USB device number 5 using ehci_hcd
[11094.763067] usb 7-2: device not accepting address 5, error -71
[11094.865104] usb 7-2: new high speed USB device number 6 using ehci_hcd
[11095.275086] usb 7-2: device not accepting address 6, error -71
[11095.275106] hub 7-0:1.0: unable to enumerate USB device on port 2
[11095.516075] usb 3-2: new full speed USB device number 2 using uhci_hcd
[11095.629066] usb 3-2: device descriptor read/64, error -71
[11095.842076] usb 3-2: device descriptor read/64, error -71
[11096.045078] usb 3-2: new full speed USB device number 3 using uhci_hcd
[11096.159076] usb 3-2: device descriptor read/64, error -71
[11096.374057] usb 3-2: device descriptor read/64, error -71
[11096.577061] usb 3-2: new full speed USB device number 4 using uhci_hcd
[11096.987031] usb 3-2: device not accepting address 4, error -71
[11097.089060] usb 3-2: new full speed USB device number 5 using uhci_hcd
[11097.498051] usb 3-2: device not accepting address 5, error -71
[11097.498072] hub 3-0:1.0: unable to enumerate USB device on port 2
[11123.552102] XFS (sdb3): xfs_log_force: error 5 returned.
[11152.946842] XFS (sdb3): xfs_log_force: error 5 returned.
[11152.946850] XFS (sdb3): xfs_log_force: error 5 returned.
[11152.946857] XFS (sdb3): xfs_do_force_shutdown(0x1) called from line 1032 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xfd6f1a42
[11152.946894] XFS (sdb3): xfs_log_force: error 5 returned.
[11152.946908] XFS (sdb3): xfs_log_force: error 5 returned.

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Sergei Epiphanov]

В сообщении от 9 июня 2011 14:58:05 автор Maks Re написал:
> [11091.142094] usb 7-2: reset high speed USB device number 2 using ehci_hcd
> [11091.256062] usb 7-2: device descriptor read/64, error -71
> [11091.471055] usb 7-2: device descriptor read/64, error -71

Несколько лет назад я сталкивался с такой ошибкой, вылечил заменой устройства 
на другое (от другой фирмы). Банально несоответствие железок.

> [11093.155345] BUG: unable to handle kernel paging request at 35408000
> [11093.155389] IP: [<c02e892c>] __percpu_counter_add+0x2c/0xe0
> [11093.155426] *pde = 00000000 
> [11093.155448] Oops: 0000 [#1] PREEMPT SMP 

А это в явной форме ошибка в ядре.

-- 
С уважением, Епифанов Сергей

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Maks Re]

На Thu, 9 Jun 2011 15:41:35 +0400
Sergei Epiphanov <serpiph@nikiet.ru> писал:

> В сообщении от 9 июня 2011 14:58:05 автор Maks Re написал:
> > [11091.142094] usb 7-2: reset high speed USB device number 2 using
> > ehci_hcd [11091.256062] usb 7-2: device descriptor read/64, error
> > -71 [11091.471055] usb 7-2: device descriptor read/64, error -71
> 
> Несколько лет назад я сталкивался с такой ошибкой, вылечил заменой
> устройства на другое (от другой фирмы). Банально несоответствие
> железок.
> 
> > [11093.155345] BUG: unable to handle kernel paging request at
> > 35408000 [11093.155389] IP: [<c02e892c>]
> > __percpu_counter_add+0x2c/0xe0 [11093.155426] *pde = 00000000 
> > [11093.155448] Oops: 0000 [#1] PREEMPT SMP 
> 
> А это в явной форме ошибка в ядре.
> 

а вот поведение на ядре 2.6.38-std-def-alt7.2

Т.О. я полагаю что контролер это...
и к тому же для переносных винчестеров не стоит видимо использовать xfs



[ 2274.963643] wlan0: associated
[ 2447.708051] usb 7-2: new high speed USB device using ehci_hcd and address 7
[ 2447.842032] usb 7-2: New USB device found, idVendor=152d, idProduct=2338
[ 2447.842036] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2447.842040] usb 7-2: Product: USB to ATA/ATAPI Bridge
[ 2447.842042] usb 7-2: Manufacturer: JMicron
[ 2447.842044] usb 7-2: SerialNumber: 2222562412BC
[ 2447.843277] scsi6 : usb-storage 7-2:1.0
[ 2448.841074] scsi 6:0:0:0: Direct-Access     ST932042 3AS              SDM1 PQ: 0 ANSI: 2 CCS
[ 2448.841396] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2448.842298] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2448.843559] sd 6:0:0:0: [sdb] Write Protect is off
[ 2448.843563] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 2448.843566] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.845051] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.898994]  sdb: sdb1 sdb2 sdb3
[ 2448.902308] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.902311] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2468.813605] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2468.814119] SGI XFS Quota Management subsystem
[ 2469.067569] XFS mounting filesystem sdb3
[ 2469.599463] Ending clean XFS mount for filesystem: sdb3
[ 4259.987676] fuse init (API version 7.16)
[ 4259.993565] EXT2-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended
[ 5420.112077] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5420.236073] usb 7-2: device descriptor read/64, error -71
[ 5420.464083] usb 7-2: device descriptor read/64, error -71
[ 5420.680100] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5420.804072] usb 7-2: device descriptor read/64, error -71
[ 5421.032053] usb 7-2: device descriptor read/64, error -71
[ 5421.248050] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5421.664048] usb 7-2: device not accepting address 7, error -71
[ 5421.776101] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5422.192076] usb 7-2: device not accepting address 7, error -71
[ 5422.192132] usb 7-2: USB disconnect, address 7
[ 5422.192136] sd 6:0:0:0: Device offlined - not ready after error recovery
[ 5422.192146] sd 6:0:0:0: [sdb] Unhandled error code
[ 5422.192149] sd 6:0:0:0: [sdb]  Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[ 5422.192154] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 04 3f cf b0 00 00 01 00
[ 5422.192163] end_request: I/O error, dev sdb, sector 71290800
[ 5422.192203] xfs_force_shutdown(sdb3,0x1) called from line 1111 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xf99fb5e2
[ 5422.192213] Filesystem sdb3: I/O Error Detected.  Shutting down filesystem: sdb3
[ 5422.192215] Please umount the filesystem, and rectify the problem(s)
[ 5422.372028] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449285] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449299] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449707] EXT2-fs (sdb2): previous I/O error to superblock detected
[ 5422.449709] 
[ 5422.498044] EXT2-fs (sdb2): previous I/O error to superblock detected
[ 5422.498047] 
[ 5422.498072] BUG: unable to handle kernel paging request at 34074000
[ 5422.498124] IP: [<c11e7564>] __percpu_counter_add+0x14/0xb0
[ 5422.498163] *pde = 00000000 
[ 5422.498190] Oops: 0000 [#1] SMP 
[ 5422.498216] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb7/speed
[ 5422.498257] Modules linked in: fuse ext2 xfs exportfs usb_storage uas usb_libusual cryptd aes_i586 aes_generic autofs4 af_packet rfcomm sco bnep l2cap dm_multipath scsi_dh dm_mod usbhid hid uinput btusb bluetooth sr_mod cdrom snd_hda_codec_analog joydev pata_acpi thinkpad_acpi snd_hda_intel arc4 snd_hda_codec snd_hwdep snd_pcm hwmon snd_timer pcmcia ecb iwl3945 iwlcore ata_generic mac80211 firewire_ohci yenta_socket ehci_hcd snd pcmcia_rsrc cfg80211 psmouse uhci_hcd e1000e usbcore pcmcia_core snd_page_alloc firewire_core rfkill serio_raw soundcore ata_piix nls_base crc_itu_t pcspkr i2c_i801 evdev nvram ac battery sg rtc_cmos rtc_core wmi rtc_lib thermal processor ext4 mbcache jbd2 crc16 sd_mod i915 crc_t10dif drm_kms_helper drm i2c_algo_bit ahci libahci libata button i2c_core scsi_mod intel_agp intel_gtt agpgart video
[ 5422.498952] 
[ 5422.498964] Pid: 10216, comm: umount Not tainted 2.6.38-std-def-alt7.2 #1 LENOVO 7659W8R/7659W8R
[ 5422.499031] EIP: 0060:[<c11e7564>] EFLAGS: 00010096 CPU: 1
[ 5422.499065] EIP is at __percpu_counter_add+0x14/0xb0
[ 5422.499099] EAX: 00000000 EBX: f41c29d0 ECX: 00000000 EDX: 00000001
[ 5422.499134] ESI: f5c9fda0 EDI: f3eb7258 EBP: f0413e74 ESP: f0413e5c
[ 5422.499174]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 5422.499204] Process umount (pid: 10216, ti=f0412000 task=f19f0fc0 task.ti=f0412000)
[ 5422.499245] Stack:
[ 5422.499264]  c135c87f f3eb7248 f5c9fda0 f19f0fc0 f5c9fda0 f3eb7258 f0413e88 c10cf873
[ 5422.499330]  00000010 f5c9fda0 f3eb7248 f0413ea0 c1132227 00000000 ef3d0e80 dc0ed400
[ 5422.499404]  00000000 f0413eac c11322f5 f1baec00 f0413ed0 f979c03e f1baec00 f97a08e9
[ 5422.499478] Call Trace:
[ 5422.499498]  [<c135c87f>] ? wait_for_common+0xef/0x130
[ 5422.499532]  [<c10cf873>] account_page_dirtied+0x63/0x90
[ 5422.499566]  [<c1132227>] __set_page_dirty+0x37/0xb0
[ 5422.499603]  [<c11322f5>] mark_buffer_dirty+0x55/0x80
[ 5422.499636]  [<f979c03e>] ext2_sync_super+0x6e/0xd0 [ext2]
[ 5422.499676]  [<f979c0f1>] ext2_sync_fs+0x51/0x60 [ext2]
[ 5422.499708]  [<c114c670>] ? dquot_quota_sync+0x0/0x2d0
[ 5422.499744]  [<c1130767>] __sync_filesystem+0x57/0x90
[ 5422.499775]  [<c11307e1>] sync_filesystem+0x21/0x50
[ 5422.499805]  [<c110e089>] generic_shutdown_super+0x29/0xd0
[ 5422.499840]  [<c10e0290>] ? pcpu_free_area+0x140/0x180
[ 5422.499872]  [<c110e155>] kill_block_super+0x25/0x70
[ 5422.499903]  [<c110e535>] deactivate_locked_super+0x35/0x60
[ 5422.499935]  [<c110f143>] deactivate_super+0x43/0x60
[ 5422.499965]  [<c11257eb>] mntput_no_expire+0x8b/0xd0
[ 5422.499995]  [<c11260a0>] sys_umount+0x60/0x330
[ 5422.500012]  [<c1055769>] ? sigprocmask+0x79/0x100
[ 5422.500012]  [<c105787c>] ? sys_rt_sigprocmask+0xdc/0x100
[ 5422.500012]  [<c135f499>] syscall_call+0x7/0xb
[ 5422.500012] Code: 10 04 36 4f c1 e8 4d 66 17 00 31 d2 89 d0 5b 5e 5d c3 90 8d 74 26 00 55 89 e5 83 ec 18 89 5d f4 89 c3 89 7d fc 89 75 f8 8b 40 14 <64> 8b 30 89 f7 c1 ff 1f 01 d6 8b 55 08 11 cf 89 d1 c1 f9 1f 39 
[ 5422.500012] EIP: [<c11e7564>] __percpu_counter_add+0x14/0xb0 SS:ESP 0068:f0413e5c
[ 5422.500012] CR2: 0000000034074000
[ 5422.513496] ---[ end trace 161b40d7437c9766 ]---
[ 5422.572077] usb 7-2: new high speed USB device using ehci_hcd and address 8
[ 5422.700117] usb 7-2: device descriptor read/64, error -71
[ 5422.928083] usb 7-2: device descriptor read/64, error -71
[ 5423.144056] usb 7-2: new high speed USB device using ehci_hcd and address 9
[ 5423.268054] usb 7-2: device descriptor read/64, error -71
[ 5423.496080] usb 7-2: device descriptor read/64, error -71
[ 5423.712079] usb 7-2: new high speed USB device using ehci_hcd and address 10
[ 5424.128100] usb 7-2: device not accepting address 10, error -71
[ 5424.240106] usb 7-2: new high speed USB device using ehci_hcd and address 11
[ 5424.656088] usb 7-2: device not accepting address 11, error -71
[ 5424.656111] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 5424.980058] usb 3-2: new full speed USB device using uhci_hcd and address 6
[ 5425.100055] usb 3-2: device descriptor read/64, error -71
[ 5425.324060] usb 3-2: device descriptor read/64, error -71
[ 5425.540048] usb 3-2: new full speed USB device using uhci_hcd and address 7
[ 5425.660083] usb 3-2: device descriptor read/64, error -71
[ 5425.940083] usb 3-2: device descriptor read/64, error -71
[ 5426.156058] usb 3-2: new full speed USB device using uhci_hcd and address 8
[ 5426.566300] usb 3-2: device not accepting address 8, error -71
[ 5426.676073] usb 3-2: new full speed USB device using uhci_hcd and address 9
[ 5427.088048] usb 3-2: device not accepting address 9, error -71
[ 5427.088068] hub 3-0:1.0: unable to enumerate USB device on port 2

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Sergei Epiphanov]

В сообщении от 9 июня 2011 16:41:00 автор Maks Re написал:
> а вот поведение на ядре 2.6.38-std-def-alt7.2
> 
> Т.О. я полагаю что контролер это...
> и к тому же для переносных винчестеров не стоит видимо использовать xfs

У меня копия Сизифа лежит на USB2.0/eSATA SSD-винчестере с xfs. Проблем нет. 
Главное - нормальное железо. Ну и sync перед вытаскиванием винта в помощь!

-- 
С уважением, Епифанов Сергей

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Sergei Epiphanov]

В сообщении от 9 июня 2011 16:41:00 автор Maks Re написал:
> Т.О. я полагаю что контролер это...

Кстати, если на компьютере очень много оперативки, которую тот использует под 
буферы дискового кеша, то после команды ' udisks --mount ...' с последующей 
массированной записью на флешку (неважно с какой ФС) и последующей команды 
'udisks --unmount ...' получается такой таймаут сброса буферов на флешку, что 
udisks вываливается с ошибкой о невозможности отмонтировать устройство, хотя 
при проверке далее обнаруживается, что устройство таки отмонтировалось. :-) Но 
уж больно стрёмно такое поведение...

-- 
С уважением, Епифанов Сергей

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Maks Re]

> Кстати, если на компьютере очень много оперативки, которую тот
> использует под буферы дискового кеша, то после команды ' udisks
> --mount ...' с последующей массированной записью на флешку (неважно с
> какой ФС) и последующей команды 'udisks --unmount ...' получается
> такой таймаут сброса буферов на флешку, что udisks вываливается с
> ошибкой о невозможности отмонтировать устройство, хотя при проверке
> далее обнаруживается, что устройство таки отмонтировалось. :-) Но уж
> больно стрёмно такое поведение...
> 

да, воистину такое видел...

это как-то регулируется?
у меня 3Г на 32 системе

Re: [sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Sergei Epiphanov]

В сообщении от 10 июня 2011 12:15:47 автор Maks Re написал:
> это как-то регулируется?
> у меня 3Г на 32 системе

У меня 12ГБ на x86_64 на одной машине и 24ГБ на x86_64 на другой. Постоянно 
приходится сначала набирать sync, а потом уже давать команду 
'udisks --unmount'.

Разве что режим sync при монтировании внешнего накопителя указывать. Тогда 
буфера не задействуются, но время записи вырастет заметно и ресурс флешки 
(если она используется) быстро закончится. Управление размерами буферов я пока 
не нашел.

-- 
С уважением, Епифанов Сергей