* [sisyphus] зависимости в пакете clamav-milter @ 2010-04-28 12:22 Vladimir 2010-04-28 12:56 ` Alexander Volkov ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Vladimir @ 2010-04-28 12:22 UTC (permalink / raw) To: sisyphus Здравствуйте. Пока не забылось. Это наверное к мантейнеру пакета clamav (относится к M50 P5 и sisyphus). Решил установить clamav-milter и, как раньше, пришлось его пересобирать. 1. При установке он требует снести postfix и установить sendmail. Зачем? Он одинаково работает и с postfix, и с sendmail. При настройке inet:socket ему вообще не нужен MTA на одной с ним машине. В Requires указан еще и "clamav = %version". Аналогично. При настройке через inet:socket ему clamav не нужен (и версия clamav на другой машине может не совпадать). То, что ему действительно нужно в Requires, это libmilter (от sendmail, но библиотека - отдельный пакет). 2. В пакете, в качестве конфигурационного шаблона, лежит файл от старой версии. С тех пор часть конфигурационных директив изменили свои имена и этот шаблон скорее мешает, чем помогает. -- Kholmanov Vladimir e-mail: fmfm@mma.ru ; fmfm@mmascience.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 12:22 [sisyphus] зависимости в пакете clamav-milter Vladimir @ 2010-04-28 12:56 ` Alexander Volkov 2010-04-28 13:07 ` Sergey 2010-04-28 13:01 ` Sergey 2010-04-28 13:01 ` Alexey I. Froloff 2 siblings, 1 reply; 8+ messages in thread From: Alexander Volkov @ 2010-04-28 12:56 UTC (permalink / raw) To: sisyphus On 2010-04-28 16:22:34 +0400, Vladimir wrote: V> V> Здравствуйте. V> V> Пока не забылось. Это наверное к V> мантейнеру пакета clamav (относится к M50 P5 и V> sisyphus). Ну так багу, чтоб не забылось ! :) -- Regards, Alexander ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 12:56 ` Alexander Volkov @ 2010-04-28 13:07 ` Sergey 0 siblings, 0 replies; 8+ messages in thread From: Sergey @ 2010-04-28 13:07 UTC (permalink / raw) To: sisyphus On Wednesday 28 April 2010, Alexander Volkov wrote: > V> Пока не забылось. Это наверное к мантейнеру пакета clamav > V> (относится к M50 P5 и sisyphus). > Ну так багу, чтоб не забылось ! :) Боюсь, это будет пофикшено путём -%def_with milter +%def_without milter :-) Если никто не возразит отсыланием изменений Виктору. ;-) -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 12:22 [sisyphus] зависимости в пакете clamav-milter Vladimir 2010-04-28 12:56 ` Alexander Volkov @ 2010-04-28 13:01 ` Sergey 2010-04-28 13:24 ` Sergey 2010-04-28 13:59 ` Vladimir 2010-04-28 13:01 ` Alexey I. Froloff 2 siblings, 2 replies; 8+ messages in thread From: Sergey @ 2010-04-28 13:01 UTC (permalink / raw) To: ALT Linux Sisyphus discussions On Wednesday 28 April 2010, Vladimir wrote: > Пока не забылось. Это наверное к мантейнеру пакета clamav (относится к > M50 P5 и sisyphus). > > Решил установить clamav-milter и, как раньше, пришлось его пересобирать. Это, скорее, ко мне. Мантейнеру пакета clamav clamav-milter не нужен совсем, он был нужен мне. > 1. При установке он требует снести postfix и установить sendmail. Зачем? Это со времён, когда в Postfix не было поддержки milter. > При настройке inet:socket ему вообще не нужен MTA на одной с ним машине. Нужен. Для отсылки уведомлений используется /sbin/sendmail > 2. В пакете, в качестве конфигурационного шаблона, лежит файл от старой > версии. С тех пор часть конфигурационных директив изменили свои имена и > этот шаблон скорее мешает, чем помогает. Видимо, это результат того, что мне clamav-milter тоже перестал быть интересен. Я перестал следить и, своевременно, отсылать Виктору исправления. В качестве замены clamav-milter я предлагаю mailfromd. Минус у него ровно один: он не работает с базами напрямую, как это умеет clamav-milter сейчас. В остальном - сплошные плюсы. Независимость от libclamav и версии ClamAV в том числе. От libmilter, кстати, он тоже не зависит. Есть пакет с конфигом для mailfromd, имитирующим только лишь функционал clamav-milter. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 13:01 ` Sergey @ 2010-04-28 13:24 ` Sergey 2010-04-28 13:59 ` Vladimir 1 sibling, 0 replies; 8+ messages in thread From: Sergey @ 2010-04-28 13:24 UTC (permalink / raw) To: ALT Linux Sisyphus discussions On Wednesday 28 April 2010, Sergey wrote: > Есть пакет с конфигом для mailfromd, имитирующим только лишь функционал > clamav-milter. Правда я поймал себя на мысли, что я не проверял его некоторое время при замене версий, сам я полный конфиг сипользую. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 13:01 ` Sergey 2010-04-28 13:24 ` Sergey @ 2010-04-28 13:59 ` Vladimir 2010-04-28 14:15 ` Sergey 1 sibling, 1 reply; 8+ messages in thread From: Vladimir @ 2010-04-28 13:59 UTC (permalink / raw) To: ALT Linux Sisyphus discussions Не с того обратного адреса отправил, пересылаю 28.04.2010 17:01, Sergey пишет: > В качестве замены clamav-milter я предлагаю mailfromd. Минус у него > ровно один: он не работает с базами напрямую, как это умеет clamav-milter > сейчас. В остальном - сплошные плюсы. Независимость от libclamav и версии > ClamAV в том числе. От libmilter, кстати, он тоже не зависит. > > Есть пакет с конфигом для mailfromd, имитирующим только лишь функционал > clamav-milter. > Я смотрел на mailfromd, но он мне показался скорее "интегратором", а мне нужен "диффиренциатор". То есть история такая. Задач на почтовый сервер вешается все больше и больше, логика работы всяких restrictions усложняется и разбираться, если это все в одном, становится невозможно. Сервис постепенно делится на автономные процессы, каждый со своими задачами и настройками (прием почты - один демон, отправка с sasl_auth - другой, отправка без auth - третий, обслуживание сайта - четвертый и т.п.). Есть желание, в том числе, milters "нарезать" мелкой соломкой и для каждого демона использовать свой "иконостас". Для inbound почты можно и amavisd, а для outbound достаточно clamav. Для входящей dkim-verifi, для sasl исходящей dkim-signer, а для исходящей no-sasl обойтись без dkim. Ну и так далее. Как мне представляется, mailfromd здесь не особый помощник. -- Kholmanov Vladimir e-mail: fmfm@mma.ru ; fmfm@mmascience.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 13:59 ` Vladimir @ 2010-04-28 14:15 ` Sergey 0 siblings, 0 replies; 8+ messages in thread From: Sergey @ 2010-04-28 14:15 UTC (permalink / raw) To: ALT Linux Sisyphus discussions On Wednesday 28 April 2010, Vladimir wrote: > > Есть пакет с конфигом для mailfromd, имитирующим только лишь функционал > > clamav-milter. > > Я смотрел на mailfromd, но он мне показался скорее "интегратором", а мне > нужен "диффиренциатор". На текущий момент он стремительно приближается к "интерпретатору конфига" скорее. > третий, обслуживание сайта - четвертый и т.п.). Есть желание, в том > числе, milters "нарезать" мелкой соломкой и для каждого демона > использовать свой "иконостас". Для inbound почты можно и amavisd, а для > outbound достаточно clamav. Для входящей dkim-verifi, для sasl исходящей > dkim-signer, а для исходящей no-sasl обойтись без dkim. Ну и так далее. > Как мне представляется, mailfromd здесь не особый помощник. Если есть желание, можно сделать несколько отдельных конфигураций mailfromd на разных сокетах для разных задач. Будет то же самое. В любом случае, для работы с clamav он, банально, удобнее clamav-milter. clamav-milter и clamd, как ни крути, программы разные, а ситуация, что clamd работает, а clamav-milter сломали, возникала раньше регулярно. Приходилось ждать. Сейчас я про это просто забыл. Плюс логгирование у clamav-milter неряшливое на мой взгляд, патч править после каждой версии тоже надоело. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [sisyphus] зависимости в пакете clamav-milter 2010-04-28 12:22 [sisyphus] зависимости в пакете clamav-milter Vladimir 2010-04-28 12:56 ` Alexander Volkov 2010-04-28 13:01 ` Sergey @ 2010-04-28 13:01 ` Alexey I. Froloff 2 siblings, 0 replies; 8+ messages in thread From: Alexey I. Froloff @ 2010-04-28 13:01 UTC (permalink / raw) To: ALT Linux Sisyphus discussion list [-- Attachment #1: Type: text/plain, Size: 278 bytes --] On Wed, Apr 28, 2010 at 04:22:34PM +0400, Vladimir wrote: > Пока не забылось. Это наверное к мантейнеру пакета clamav (относится к > M50 P5 и sisyphus). https://bugzilla.altlinux.org/ KTHXBYE -- Regards, -- Sir Raorn. --- http://thousandsofhate.blogspot.com/ [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 198 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-04-28 14:15 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-04-28 12:22 [sisyphus] зависимости в пакете clamav-milter Vladimir 2010-04-28 12:56 ` Alexander Volkov 2010-04-28 13:07 ` Sergey 2010-04-28 13:01 ` Sergey 2010-04-28 13:24 ` Sergey 2010-04-28 13:59 ` Vladimir 2010-04-28 14:15 ` Sergey 2010-04-28 13:01 ` Alexey I. Froloff
ALT Linux Sisyphus discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \ sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru public-inbox-index sisyphus Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.sisyphus AGPL code for this site: git clone https://public-inbox.org/public-inbox.git