* [sisyphus] wm6.1 p5/branch как побороть проблему???
@ 2009-12-03 14:12 Denis Kuznetsov
2009-12-04 13:22 ` Denis Kuznetsov
0 siblings, 1 reply; 2+ messages in thread
From: Denis Kuznetsov @ 2009-12-03 14:12 UTC (permalink / raw)
To: ALT Linux Sisyphus discussions
Привет!
Попробовал настроить синхронизацию между p5 и wm6.1
наблюдаю картину, после подключения устройства по USB
$ sudo ip addr show dev eth2
11: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 80:00:60:0f:e8:00 brd ff:ff:ff:ff:ff:ff
inet 169.254.2.2/24 brd 169.254.2.255 scope global eth2
запускаю sync-engine и pls показывает список папок на устройстве.
после переподключения устройства наблюдаю:
$ pls
** Message: Device /org/freedesktop/Hal/devices/net_80_00_60_0f_e8_00 not
fully set in Hal, skipping
** Message: Odccm is not running, ignoring
pls: Could not find configuration at path '(Default)'
перезапуск sync-engine:
$ sync-engine
SynCE sync-engine starting up
2009-12-03 16:09:21,812 DEBUG syncengine : running main loop
2009-12-03 16:09:21,813 DEBUG syncengine : creating SyncEngine object
2009-12-03 16:09:21,851 INFO engine.syncengine.kernel : __init__: connected
device found
2009-12-03 16:09:21,859 DEBUG syncengine : installing signal handlers
И так до полной перезагрузки десктопа.
Список пакетов:
$ rpm -qa | egrep -i "(sync|rra|rapi)"
kdepim-ksync-3.5.10-alt3
multisync-gui-0.91.0-alt3.svn353
libopensync-plugin-vformat-0.36-alt1
libopensync-plugin-kdepim-0.36-alt1
python-module-librra-0.14-alt1
rapi-tools-0.14-alt1
libasyncns-0.7-alt2
synce-sync-engine-0.12-alt1
libsynce-0.14-alt1
librapi-0.14-alt1
python-module-opensync0-0.22-alt3
rsync-3.0.6-alt1
libopensync-0.36-alt1.1
msynctool-0.36-alt1
libopensync-plugin-file-0.36-alt1
libcanberra-gtk2-0.17-alt1
librra-0.14-alt1
libopensync-plugin-synce-0.12-alt1
libopensync0-plugin-synce-rra-0.22.1-alt1
libopensync0-0.22-alt3
synce-hal-0.14-alt1
python-module-librapi-0.14-alt1
synce-kpm-0.14-alt1
libopensync-plugin-python-0.36-alt1.1
libcanberra-0.17-alt1
synce-odccm-0.13-alt1
--
Denis E. Kuznetsov
e-mail: kde{at}kde.kiev.ua
jabber: denis.e.kuznetsov{at}gmail.com
--------------
> А почему тени не отбрасывают теней? Просто очень интересно, а с физикой
всегда было плохо.
Отбрасывают, просто эти тени находятся на другом слое сумрака.
--bugmaker(linux.org.ru)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [sisyphus] wm6.1 p5/branch как побороть проблему???
2009-12-03 14:12 [sisyphus] wm6.1 p5/branch как побороть проблему??? Denis Kuznetsov
@ 2009-12-04 13:22 ` Denis Kuznetsov
0 siblings, 0 replies; 2+ messages in thread
From: Denis Kuznetsov @ 2009-12-04 13:22 UTC (permalink / raw)
To: sisyphus
В догонку:
Путем сравнения вывода lshal обнаружено,
Первое подклучение устройства (все ок):
udi = '/org/freedesktop/Hal/devices/net_80_00_60_0f_e8_00'
info.addons = {'hal-synce-rndis'} (string list)
info.callouts.remove = {'hal-synce-rndis'} (string list)
info.capabilities = {'net', 'net.80203', 'wake_on_lan', 'sync', 'pda'}
(string list)
info.category = 'pda' (string)
info.interfaces =
{'org.freedesktop.Hal.Device.WakeOnLan', 'org.freedesktop.Hal.Device.Synce'}
(string list)
info.parent
= '/org/freedesktop/Hal/devices/usb_device_930_d29_e6461300_3205_0801_3a25_06190a0a062b_if0'
(string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_80_00_60_0f_e8_00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path
= '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/net/eth2' (string)
net.80203.mac_address = 140739100010496 (0x8000600fe800) (uint64)
net.address = '80:00:60:0f:e8:00' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth2' (string)
net.linux.ifindex = 9 (0x9) (int)
net.originating_device
= '/org/freedesktop/Hal/devices/usb_device_930_d29_e6461300_3205_0801_3a25_06190a0a062b_if0'
(stri
ng)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'}
(string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths =
{'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system
-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names =
{'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'}
(string list)
pda.platform = 'pocketpc' (string)
pda.pocketpc.cpu_type = 2577 (0xa11) (uint64)
pda.pocketpc.current_partner_id = 1339519352 (0x4fd77178) (uint64)
pda.pocketpc.guid = '{63385854-AD8B-58A3-E14F-8DF585430C79}' (string)
pda.pocketpc.hotsync_interface = 'X01T' (string)
pda.pocketpc.iface_address = '169.254.2.2' (string)
pda.pocketpc.ip_address = '169.254.2.1' (string)
pda.pocketpc.model = 'TOSHIBA X01T' (string)
pda.pocketpc.name = 'X01T' (string)
pda.pocketpc.os_major = 5 (0x5) (uint64)
pda.pocketpc.os_minor = 2 (0x2) (uint64)
pda.pocketpc.password = 'unset' (string)
pda.pocketpc.platform = 'PocketPC' (string)
pda.pocketpc.version = 1379795461 (0x523e0205) (uint64)
sync.engine = 'opensync' (string)
sync.plugin = 'synce' (string)
usb.product = 'Windows Mobile Device' (string)
после этого отключаю устройство от USB и подкоючаю снова, наблюдаю:
udi = '/org/freedesktop/Hal/devices/net_80_00_60_0f_e8_00'
info.addons = {'hal-synce-rndis'} (string list)
info.callouts.remove = {'hal-synce-rndis'} (string list)
info.capabilities = {'net', 'net.80203', 'wake_on_lan', 'sync', 'pda'}
(string list)
info.category = 'pda' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent
= '/org/freedesktop/Hal/devices/usb_device_930_d29_e6461300_3205_0801_3a25_06190a0a062b_if0'
(string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_80_00_60_0f_e8_00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path
= '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/net/eth2' (string)
net.80203.mac_address = 140739100010496 (0x8000600fe800) (uint64)
net.address = '80:00:60:0f:e8:00' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth2' (string)
net.linux.ifindex = 8 (0x8) (int)
net.originating_device
= '/org/freedesktop/Hal/devices/usb_device_930_d29_e6461300_3205_0801_3a25_06190a0a062b_if0'
(string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'}
(string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths =
{'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'}
(string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names =
{'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'}
(string list)
pda.platform = 'pocketpc' (string)
sync.engine = 'opensync' (string)
sync.plugin = 'synce' (string)
usb.product = 'Windows Mobile Device' (string)
то-е. информация об-устройстве не полная.
$ rpm -qa | grep ^kernel
kernel-modules-oss-std-def-2.6.30-alt14
kernel-source-virtualbox-video-3.0.8-alt1
kernel-source-virtualbox-netfilter-3.0.8-alt1
kernel-source-kqemu-1.4.0-alt0.1.pre1
kernel-source-virtualbox-addition-3.0.8-alt1
kernel-image-std-def-2.6.30-alt14
kernel-source-virtualbox-vfs-3.0.8-alt1
kernel-headers-common-1.1.11-alt1
kernel-modules-kqemu-std-def-1.4.0-alt0.1.pre1.132638.14
kernel-source-virtualbox-3.0.8-alt1
kernel-modules-virtualbox-addition-std-def-3.0.8-alt1.132638.14
kernel-source-virtualbox-netadaptor-3.0.8-alt1
kernel-modules-alsa-std-def-2.6.30-alt14
kernel-modules-drm-std-def-2.6.30-alt14
kernel-modules-virtualbox-std-def-3.0.8-alt1.132638.14
вопрос: на кого вешать багу?
--
Denis E. Kuznetsov
e-mail: kde{at}kde.kiev.ua
jabber: denis.e.kuznetsov{at}gmail.com
--------------
Дык по идее у девочек таймер ожидания ебилдов обнуляется каждый месяц.
--Gharik(linux.org.ru)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-12-04 13:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-12-03 14:12 [sisyphus] wm6.1 p5/branch как побороть проблему??? Denis Kuznetsov
2009-12-04 13:22 ` Denis Kuznetsov
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git