From: "Хихин Руслан" <hihin@yandex.ru>
To: sisyphus@lists.altlinux.org
Subject: Re: [sisyphus] k3b - достал глюк.
Date: Tue, 18 Sep 2007 19:25:39 +0400
Message-ID: <200709181925.48688@ruslandh> (raw)
In-Reply-To: <46EF7785.6030507@svi.pp.ru>
[-- Attachment #1.1: Type: text/plain, Size: 420 bytes --]
Здравствуйте Шишков Евгений
В сообщении от Вторник 18 сентября 2007 Шишков Евгений написал(a):
> Ну прислал же вывод. Что дальше то?
А вы сами взгляните на diff :)
Мне в глаза большой разницы не бросилось, правда порядок почему-то чуть
разный, частота процессора и температура в плохом случае чуть больше
да и с USB какие-то траблы. Но по-хорошему это не должно относится к
делу.
--
С уважением Хихин Руслан
[-- Attachment #1.2: rabotaet.diff --]
[-- Type: text/x-diff, Size: 11003 bytes --]
diff -uNr nerabotaet/dmesg rabotaet/dmesg
--- nerabotaet/dmesg 2007-09-12 13:21:56 +0400
+++ rabotaet/dmesg 2007-09-12 08:51:41 +0400
@@ -38,7 +38,7 @@
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
-Detected 2394.179 MHz processor.
+Detected 2394.074 MHz processor.
Built 1 zonelists. Total pages: 262128
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=e10e5f15-0e92-4781-adf1-575960f613c6 splash=silent
bootsplash: silent mode.
@@ -53,7 +53,7 @@
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035000k/1048512k available (1585k kernel code, 12940k reserved, 640k data, 192k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 4791.90 BogoMIPS (lpj=9583804)
+Calibrating delay using timer specific routine.. 4791.91 BogoMIPS (lpj=9583822)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
@@ -78,7 +78,7 @@
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
-Calibrating delay using timer specific routine.. 4788.38 BogoMIPS (lpj=9576762)
+Calibrating delay using timer specific routine.. 4788.31 BogoMIPS (lpj=9576628)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
@@ -90,12 +90,12 @@
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
-Total of 2 processors activated (9580.28 BogoMIPS).
+Total of 2 processors activated (9580.22 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
-migration_cost=73
+migration_cost=71
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=2
@@ -143,7 +143,7 @@
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
-audit(1189602944.688:1): initialized
+audit(1189585304.692:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
@@ -235,13 +235,23 @@
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
+EXT3-fs: INFO: recovery required on readonly filesystem.
+EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
+EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.7)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
+Linux agpgart interface v0.101 (c) Dave Jones
+fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
+[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
+[fglrx] USWC is disabled in module parameters
+[fglrx] PAT is disabled!
+[fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
+input: PC Speaker as /class/input/input1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.0 to 64
@@ -251,6 +261,11 @@
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
+Floppy drive(s): fd0 is 1.44M
+parport: PnPBIOS parport detected.
+parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
+FDC 0 is a post-1991 82077
+Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
@@ -259,7 +274,10 @@
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
-Linux agpgart interface v0.101 (c) Dave Jones
+hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
+Uniform CD-ROM driver Revision: 3.20
+hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
+8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
@@ -277,12 +295,7 @@
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
-hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
-Uniform CD-ROM driver Revision: 3.20
-hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
-agpgart: Detected an Intel 865 Chipset.
-agpgart: AGP aperture is 128M @ 0xe0000000
-usb 1-2: configuration #1 chosen from 1 choice
+input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
@@ -293,33 +306,22 @@
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
-input: PC Speaker as /class/input/input1
-Real Time Clock Driver v1.12ac
-usb 1-2: USB disconnect, address 2
+ts: Compaq touchscreen protocol output
+agpgart: Detected an Intel 865 Chipset.
+agpgart: AGP aperture is 128M @ 0xe0000000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
-parport: PnPBIOS parport detected.
-parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
-fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
-[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
-[fglrx] USWC is disabled in module parameters
-[fglrx] PAT is disabled!
-[fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
-Floppy drive(s): fd0 is 1.44M
-FDC 0 is a post-1991 82077
-8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 209
-eth0: RealTek RTL8139 at 0xf8812000, 00:0d:87:c6:54:b5, IRQ 209
+eth0: RealTek RTL8139 at 0xf8804000, 00:0d:87:c6:54:b5, IRQ 209
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
-input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
-ts: Compaq touchscreen protocol output
-usb 1-2: new full speed USB device using uhci_hcd and address 3
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.5 to 64
-usb 1-2: configuration #1 chosen from 1 choice
-intel8x0_measure_ac97_clock: measured 54754 usecs
+usb 1-2: device not accepting address 2, error -71
+intel8x0_measure_ac97_clock: measured 58758 usecs
intel8x0: clocking to 48000
+usb 1-2: new full speed USB device using uhci_hcd and address 4
Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k
+usb 1-2: configuration #1 chosen from 1 choice
EXT3 FS on sda1, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
@@ -328,6 +330,7 @@
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb1, internal journal
+EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
intel_rng: FWH not detected
@@ -335,7 +338,7 @@
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
-ACPI: Thermal Zone [THRM] (48 C)
+ACPI: Thermal Zone [THRM] (41 C)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
diff -uNr nerabotaet/lsmod rabotaet/lsmod
--- nerabotaet/lsmod 2007-09-12 13:22:04 +0400
+++ rabotaet/lsmod 2007-09-12 08:51:30 +0400
@@ -11,40 +11,40 @@
snd_ac97_codec 103716 1 snd_intel8x0
ac97_bus 6400 1 snd_ac97_codec
snd_pcm_oss 47008 0
-tsdev 11840 0
snd_seq_dummy 8196 0
snd_seq_oss 38656 0
+8139cp 27904 0
+tsdev 11840 0
snd_seq_midi_event 11520 1 snd_seq_oss
snd_seq 56784 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 12556 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 81540 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
-8139cp 27904 0
-8139too 31104 0
snd_timer 26116 2 snd_seq,snd_pcm
-mii 9600 2 8139cp,8139too
-floppy 60516 0
-fglrx 742944 11
snd 59112 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer
soundcore 13792 1 snd
-psmouse 41992 0
-parport_pc 42340 0
+intel_agp 27932 1
+8139too 31104 0
+ide_cd 42272 0
i2c_i801 11660 0
+psmouse 41992 0
serio_raw 11140 0
-snd_page_alloc 14088 2 snd_intel8x0,snd_pcm
-parport 39752 1 parport_pc
rtc 17076 0
-pcspkr 7296 0
-ehci_hcd 34824 0
-i2c_core 25216 1 i2c_i801
-ide_cd 42272 0
+parport_pc 42340 0
+parport 39752 1 parport_pc
+floppy 60516 0
cdrom 38304 1 ide_cd
-intel_agp 27932 1
-agpgart 35784 2 fglrx,intel_agp
-evdev 13568 1
+ehci_hcd 34824 0
+snd_page_alloc 14088 2 snd_intel8x0,snd_pcm
uhci_hcd 26764 0
+i2c_core 25216 1 i2c_i801
+mii 9600 2 8139cp,8139too
+pcspkr 7296 0
+fglrx 742944 11
+agpgart 35784 2 intel_agp,fglrx
usbcore 129028 3 ehci_hcd,uhci_hcd
sg 37660 0
+evdev 13568 1
fuse 49940 0
ext3 134664 3
jbd 61608 1 ext3
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2007-09-18 15:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-10 5:54 Шишков Евгений
2007-09-10 6:13 ` Roman Batejkin
2007-09-10 8:06 ` Шишков Евгений
2007-09-10 8:21 ` Starodumoff Ilya
2007-09-10 9:06 ` Шишков Евгений
2007-09-10 6:54 ` Anton Farygin
2007-09-11 4:32 ` Шишков Евгений
2007-09-12 4:24 ` Dmitry A. Kharitonov
2007-09-12 9:23 ` Шишков Евгений
2007-09-12 9:57 ` Шишков Евгений
2007-09-18 7:00 ` Шишков Евгений
2007-09-18 15:25 ` Хихин Руслан [this message]
2007-09-18 16:17 ` Евгений
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709181925.48688@ruslandh \
--to=hihin@yandex.ru \
--cc=sisyphus@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Sisyphus discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/sisyphus/0 sisyphus/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 sisyphus sisyphus/ http://lore.altlinux.org/sisyphus \
sisyphus@altlinux.ru sisyphus@altlinux.org sisyphus@lists.altlinux.org sisyphus@lists.altlinux.ru sisyphus@lists.altlinux.com sisyphus@linuxteam.iplabs.ru sisyphus@list.linux-os.ru
public-inbox-index sisyphus
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.sisyphus
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git